Name: torque from a couple: solving forces
Uploaded: 2023-09-22T11:49:21.000Z
Duration: 1 min 30 s
Channel: JoVE

3차원 좌표계에서 x축의 점 O에 있는 커플링에 부착된 파이프를 생각해 보십시오.
길이가 0.12미터인 두 개의 렌치가 z축을 따라 120뉴턴의 동일하고 반대 힘을 가합니다. 렌치는 x축을 따라 O 지점에서 0.5m 및 0.7m 거리에 있습니다.
시스템의 커플 모멘트를 결정합니다.
점 O에 대한 커플 모멘트는 위치 벡터의 교차곱과 적용된 힘의 합으로 결정됩니다.
rA와 rB는 각각 점 O에서 점 A와 B로 시작하는 위치 벡터를 나타냅니다.
위치 벡터r A와 rB 의 차이는 벡터 r이며, 이는 반대 힘 사이의 거리입니다.
커플 모멘트는 위치 벡터와 힘 벡터의 외적으로 행렬식 형태로 표현할 수 있습니다.
커플 모멘트의 크기는 결과 벡터의 구성 요소의 제곱의 합에 대한 제곱근을 취하여 결정됩니다.

<ol>
	<li>히벨러, R.C. (2016). Engineering Mechanics \u2012 정역학 및 동역학. 뉴저지 호보켄: 피어슨 프렌티스 홀. 154-156, 165쪽.</li>
</ol>

우력 모멘트: 문제 해결

우력 모멘트(couple moment)는 물리학과 공학에서 필수적인 개념으로, 두 개의 동일한 힘과 반대되는 힘인 결합이 물체에 작용할 때 생성되는 회전력 또는 토크를 계산하는 데 사용됩니다.
우력 모멘트는 힘 중 하나의 크기에 두 힘의 작용선 사이의 수직거리를 곱하여 구할 수 있습니다. 그러면 꼬이는 힘이 생기고, 이 힘은 물체를 회전시킬 때 사용할 수 있습니다. 우력 모멘트는 균형 잡힌 힘과 불균형한 힘을 포함하는 문제를 해결하는 데 사용됩니다. 
우력이 문제를 해결하는 순간의 과정에는 몇 가지 핵심 단계가 포함됩니다. 처음에는 대상에 작용하는 관련 힘을 식별하고 명확하고 간단한 다이어그램으로 그려야 합니다. 이를 통해 문제를 시각화하고 이해하기 쉽게 만들 수 있습니다.
다음으로 두 힘의 작용선 사이의 수직거리와 관련된 벡터를 구하여라. 힘벡터와 수직벡터의 곱을 곱하면 우력 모멘트를 얻을 수 있다. 모멘트의 방향은 토크의 방향이 힘과 거리벡터 모두에 수직이라는 오른손 법칙으로 결정할 수 있습니다.
마지막으로, 모멘트는 당면한 문제를 해결하는 데 사용될 수 있습니다. 이것은 물체에 대한 전체 토크를 계산하거나, 회전하는 물체의 각속도나 가속도를 결정하거나, 커플이 한 일을 계산하는 것을 포함할 수 있습니다.

커플의 순간은 물리학 및 공학에서 필수적인 개념으로, 커플이 있을 때 생성되는 회전력 또는 토크를 계산하는 데 사용됩니다.

Education

교육

JoVE Core

Mechanical Engineering

기계공학

Unit 1

제1단원

Force System Resultants

힘 체계의 합력

KEY TERMS AND CONCEPTS

주요 용어 및 개념

Moment of a Couple: Problem Solving

torque from a couple: solving forces

The moment of a couple is a key physics and engineering idea for finding torque, or rotational force. A couple is made of two equal and opposite forces that act on an object. When those forces work together, they create a twisting effect that can rotate the object.

The moment of a couple is calculated by multiplying the size of one force by the perpendicular distance between the two lines of action. That distance is the shortest straight-line distance between the force directions. This gives the moment needed to describe how strongly the couple turns the object.

Problem solving with a couple starts by identifying the forces on the object and drawing them in a clear, simple diagram. The next step is to find the vector for the perpendicular distance between the force lines. Then the cross product of the force vector and the perpendicular vector gives the moment of the couple.

The direction of the moment is found with the right-hand rule. This rule shows that the torque direction is perpendicular to both the force and the distance vector. Once the direction and size are known, the moment can help solve balanced and unbalanced force problems, find overall torque, determine angular velocity or angular acceleration, and calculate the work done by the couple.

Torque from a Couple: Solving Forces

moment of a force: scalar formulation

Torque on a Flywheel: Direction and Size

Torque, or the moment of a force, describes how a force can make an object turn about an axis. It is a vector quantity, so it has both size and direction. This idea is important in physics, mechanics, and engineering. A simple flywheel example shows how torque works. The flywheel rotates about point O when a force is applied to it. The moment arm is the perpendicular distance from point O to the line of action of the force. The moment, in newton-meter (N-m), is found by multiplying the force...

moment of a force: problem solving

Calculating Force Moments in Problem Solving

Calculating force moments in problem solving helps students analyze rotation in mechanical systems. The scalar form of the moment of a force is used to work through these problems step by step. Start by drawing a free-body diagram, or FBD. An FBD is a sketch that shows every force acting on the system. Each force must be identified and included. Next, identify the axis or point about which the moment is calculated. In some problems, that axis or point is given. In other cases, you must choose...

resultant moment: scalar formulation

Net Moment Sign Convention in 2D Forces

Net moment in two-dimensional force systems shows how multiple forces can cause rotation about a fixed point. The scalar formulation helps analyze equilibrium in structures that are acted on by several forces. It focuses on the x-y plane and uses a simple sign rule to describe the direction of rotation. To find the resultant moment, the moments from all forces in the system are considered about a chosen point A. Each moment is assigned a sign based on its sense of rotation. Positive moments...

moment of a force: vector formulation

Moment of Force and Direction Rules

The moment of force describes the twisting effect a force can have on an object. It shows why a force may cause rotation instead of straight-line motion. The moment arm is the perpendicular distance from the force’s line of action to the axis of rotation. The moment of force is a vector quantity, not a scalar. Its vector form comes from the cross product of the position vector and the force vector. A cross product gives a vector that is perpendicular to both input vectors. The moment about a...

cartesian form for vector formulation

Calculating Moment with Cartesian Vectors

Calculating moment with Cartesian vectors shows how position and force vectors work together. The moment of force is the cross product of these vectors, so it is a vector quantity. In Cartesian form, unit vectors help write the vectors in component form. The cross product can be arranged in determinant form. That determinant is then expanded to find the Cartesian vector form of the moment of force. This method gives a clear way to work through the calculation step by step. A revolving door...

resultant moment: vector formulation

Calculating Torque from Multiple Forces

Resultant moment describes the total turning effect of multiple forces acting on an object. It shows how several forces can combine to make a body rotate about a point. In physics, moment is the tendency of a force to cause rotation. The resultant moment of a force system is a vector quantity. That means it can be added and subtracted like other vectors. For a system with two forces, F1 and F2, acting on a pole at points A and B, the resultant moment is written as MR = (rA x F1) + (rB x F2).

principle of moments

Resolving Forces in Moment Calculations

The principle of moments, also called Varignon's theorem, explains how a force creates rotation about a point. It is a key idea in physics and engineering. It also helps describe when a rigid body stays in equilibrium under external forces. The moment of a force is found by multiplying the force by the perpendicular distance from the point of application to the point being studied. A larger force or a larger distance gives a larger moment. This makes the idea useful for checking how strongly a...

principle of moments: problem solving

Torque About an Axis in 3D Systems

The principle of moments helps solve torque problems in physics and engineering. It describes how forces and moments balance around a pivot point or axis. It is used in many real-life cases, including construction, sports, and everyday actions like opening doors and pushing objects. The problem here uses a pole in a three-dimensional system with a cable attached. When tension acts in the cable, the goal is to find the moment about the z-axis through the base. One method is to project the force...

moment of a force about an axis: scalar

Bicycle Torque and Moment About an Axis

The moment of a force about an axis describes how a force can make an object turn around a fixed line. In scalar analysis, the moment is found from the perpendicular distance between the axis of rotation and the line of action of the force. That distance is called the moment arm. A bicycle gives a clear example of this idea. When the cyclist pushes on the pedal, the chain applies a force to the wheel’s axle and makes it rotate. The axis of rotation passes through the axle, and the moment arm...

moment of a force about an axis: vector

Torque on a Bicycle Wheel: Vector Method

Torque, or the moment of a force, explains how a force can make an object rotate about an axis. A bicycle is a clear example. When a cyclist presses on the pedal, the crankshaft turns and helps drive the wheel. To analyze this motion, a coordinate system is set up first. The x-axis is tangential to the wheel, the y-axis is perpendicular to the x-axis and points upward, and the z-axis points outward from the wheel. In this setup, the force on the wheel axle lies along the x-axis. The axle...

couple

Couple Moment in Force Systems

A couple is a pair of parallel forces that are equal in magnitude and opposite in direction. The two forces are separated by a perpendicular distance called the couple arm. Together, they create a turning effect on a body instead of a net push. This turning effect is called the couple moment. It rotates the body about an axis that is perpendicular to the plane of the forces. The SI unit for a couple moment is the Newton-meter (N-m). A common example is tightening a bolt with a lug wrench. In...

couples: scalar and vector formulation

Couple Moments and the Right-Hand Rule

Couple moments describe the turning effect of two parallel forces that are equal in magnitude and opposite in sense. This force pair creates rotation instead of straight-line motion. A common example is a ship’s steering wheel, where a small turn can guide the ship through the ocean. A couple moment can rotate clockwise or anticlockwise. The right-hand rule helps identify its direction. To use it, curl the fingers of your right hand in the direction of rotation. Your thumb points in the...

equivalent couples

Equivalent Couples in Mechanical Systems

Equivalent couples in mechanical systems describe pairs of forces that create the same rotational effect on a rigid body. Two couples are equivalent when they have the same moment magnitude and act in the same direction. They then cause the same angular displacement or angular acceleration in the body. A couple is made of equal and opposite forces separated by a perpendicular distance. The moment of the couple depends on both the force size and the spacing between the forces. For example, one...

moment of a couple: problem solving

The moment of a couple is a key physics and engineering idea for finding torque, or rotational force. A couple is made of two equal and opposite forces that act on an object. When those forces work together, they create a twisting effect that can rotate the object. The moment of a couple is calculated by multiplying the size of one force by the perpendicular distance between the two lines of action. That distance is the shortest straight-line distance between the force directions. This gives...

system of forces and couples

Equivalent Force and Moment Systems

Structural systems often experience several forces and couple moments at the same time. Engineers simplify these loading cases by replacing them with an equivalent force and moment system at a chosen point O. This makes the analysis easier while keeping the same external effects on the member. A key idea in this process is the principle of transmissibility. A force is a sliding vector, which means it can be moved anywhere along its line of action without changing how the body behaves...

simplification of a force and couple system i

simplification-of-a-force-and-couple-system-i

Resultant Forces in Force and Couple Systems

Force and couple systems can be reduced to a simpler equivalent system. This makes rigid body analysis easier because the external effect of the forces is captured with fewer elements. When the resultant force and resultant couple moment have perpendicular lines of action, the system may be reduced further to a single resultant force along a new line of action. Three common force systems can be simplified this way: concurrent, coplanar, and parallel. A concurrent force system has lines of...

simplification of a force and couple system: ii

simplification-of-a-force-and-couple-system-ii

Resultant Force and Wrench Motion

Resultant force and resultant couple moment describe how several forces and moments act together on a rigid body in three dimensions. When many forces act on an object, they can be replaced by one equivalent force. The moments from those forces can also be combined into one equivalent couple moment. In some cases, the resultant force and the resultant couple moment are not mutually perpendicular. That means the angle between them is not 90 degrees. To study this situation, the couple moment is...

distributed loads

Load Distribution on Shelves and Dams

Load distribution helps engineers describe how force spreads across a surface or structure. A distributed load is a continuous force per unit area, rather than a single point force. It is a common idea in many practical situations. A bookshelf full of stacked books is one simple example. The weight of the books is spread along the shelf, so the pressure changes across the surface. This pressure is measured in Newtons per square meter, or Pascals. A hydroelectric dam gives another clear...

load along a single axis

Finding Resultant Loads on a Beam

Structural engineering often requires finding the resultant load on a beam with changing force patterns. Here, a beam of length L carries a varying load made from parabolic and trapezoidal load distributions along the x-axis. The goal is to find the total load, where it acts, and the centroid of the combined area so the beam’s response can be predicted. The parabolic load is handled first. A small force element, dR, acts over a short distance, dx, and these elements are integrated across the...

distributed loads: problem solving

Equivalent Resultant Loads on Beams

Equivalent resultant loads on beams can be found by breaking a distributed load into smaller regions. This makes the beam easier to analyze. Each region can then be handled on its own before the results are combined. The magnitude of the equivalent resultant load for each region comes from the area of that region. In this setting, area represents the force applied by the distributed load over that part of the beam. After finding the force for each region, the position of each resultant load...

key terms and concepts

Learn how a couple creates torque, how to find its moment using force and distance, and how the right-hand rule helps solve rotation problems.

Torque from a Couple: Solving Forces | JoVE K12

JoVE Core Mechanical Engineering offers concise, easy-to-understand animated videos covering key topics such as equilibrium, forces, truss analysis, and structural mechanics. Explore their real-world applications, and witness these concepts in action through scientist-led experiments.

mechanical engineering

Torque from a Couple: Solving Forces

Description

Transcript

Tags