Name: solving a three-force member example
Uploaded: 2023-09-22T11:49:22.000Z
Duration: 1 min 27 s
Channel: JoVE

세 개의 서로 다른 지점에서 작용하는 세 가지 힘을받는 강체를 세 가지 힘 부재라고합니다.
이러한 힘의 작용선은 작용선이 평행한 평행 힘을 제외하고는 동시적이어야 합니다.
A 지점에서 핀 지지대에 연결된 쓰레기 수거통과 B 지점에서 유압 실린더에 연결된 핀을 생각해 보십시오.
유압 실린더는 평형 상태의 2력 부재입니다. 무게로 인한 힘은 무게 중심을 통해 작용하고 지지로 인한 반력은 A 지점에서 작용합니다.
첫 번째 단계는 쓰레기 수거통에 작용하는 모든 힘을 포함하는 시스템의 자유 물체 다이어그램을 그리는 것입니다.
힘 및 모멘트 평형 방정식을 사용하여 알 수 없는 힘 F, A 및 FCB를 결정할 수 있습니다.
그런 다음 점 A의 모멘트 평형 조건은 힘 FCB를 계산합니다.
수직 방향을 따른 힘 평형 조건은 수직 반력을 제공합니다.
마찬가지로, 수평 방향을 따라 힘 평형 조건을 적용하면 수평 반력이 생성됩니다.

<ol>
	<li>히벨러, R.C. (2016). Engineering Mechanics \u2012 정역학 및 동역학. 뉴저지 호보켄: 피어슨 프렌티스 홀. 230쪽.</li>
	<li>맥주, F.P.; 존스턴, ER; 마주렉, D.F; 크롬웰, PJ 및 셀프, BP (2019). 엔지니어를 위한 벡터 역학 \u2012 Statics and Dynamics. 뉴욕 : McGraw-Hill. 196쪽</li>
</ol>

세 개의 힘을 받는 물체

Three Force Member

세 지점에서 작용하는 세 개의 힘을 받는 강체를 세 힘 부재라고 합니다. 이 힘들은 평행한 힘을 제외하고는 동시에 작용선이 있어야 합니다.

예를 들어 A 지점의 핀 지지대에 연결된 쓰레기수거통과 B 지점의 유압 실린더에 연결된 핀을 고려해 보겠습니다.


<img alt="Figure 1" src="/files/ftp_upload/14274/14274_Figure_1v3.jpg" style="text-align: center; height: 300px;">

이 경우 유압 실린더는 평형 상태에 있는 2중력 부재입니다. 무게로 인한 힘은 무게중심을 통해 작용하고 지지로 인한 반력은 지점 A에 작용합니다.

알려지지 않은 힘 FA및 FCB을 해결하기 위해 첫 번째 단계는 쓰레기수거통에 작용하는 모든 힘을 포함한 전체 시스템의 자유 물체 다이어그램을 작성하는 것이 포함됩니다.

<img alt="Figure 2" src="/files/ftp_upload/14274/14274_Figure_2v2.png" style="text-align: center; height: 250px;">

다음으로 힘과 모멘트 평형 방정식을 사용하여 미지의 힘의 값을 결정할 수 있습니다.

<img alt="Equation 1" src="/files/ftp_upload/14274/14274_PT_Equation_1v2.svg" style="text-align: center; height: 13px;" />
<img alt="Equation 2" src="/files/ftp_upload/14274/14274_PT_Equation_2v2.svg" style="text-align: center; height: 13px;" />
<img alt="Equation 3" p="" src="/files/ftp_upload/14274/14274_PT_Equation_3v2.svg" style="text-align: center; height: 13px;" />

점 A에서 모멘트 평형 조건은 힘 FCB의 값을 24.08kN으로 줍니다. 한편 수직 방향에 따른 힘 평형 조건은 수직 반력 FAy을 9.74kN으로 결정합니다. 마찬가지로 수평 방향에 따라 힘 평형 조건을 적용하면 수평 반력 FAx이 25.74kN으로 생성됩니다.

세 지점에서 작용하는 세 가지 힘을받는 강체를 세 가지 힘 구성원이라고합니다. 이러한 힘은 다음을 제외하고 동시 행동 라인을 가져야 합니다.

Education

교육

JoVE Core

Mechanical Engineering

기계공학

Unit 1

제1단원

Equilibrium of a Rigid Body

강체의 평형

KEY TERMS AND CONCEPTS

주요 용어 및 개념

solving a three-force member example

A three-force member is a rigid body acted on by three forces at three points. The forces must have concurrent lines of action. If the forces are parallel, their lines of action stay parallel instead.

A dumpster provides the example used here. It is connected to a pin support at point A and to a pin on a hydraulic cylinder at point B. The hydraulic cylinder acts as a two-force member in equilibrium. The dumpster weight acts through the center of gravity, and the support reaction acts at point A.

The solution starts with a free-body diagram of the entire system. That diagram includes every force acting on the dumpster. Then the force and moment equilibrium equations are used to solve for the unknown forces.

Taking moments about point A gives the cylinder force F CB as 24.08 kN. The vertical force equilibrium condition gives the vertical reaction F Ay as 9.74 kN. The horizontal force equilibrium condition gives the horizontal reaction F Ax as 25.74 kN.

Solving a Three-Force Member Example

conditions of equilibrium

Rigid Body Force Balance in Equilibrium

Rigid body equilibrium depends on a balance of external forces and moments. A rigid body is in equilibrium when it has no translational motion and no rotational motion. This happens when the net force and the net couple acting on the body are both zero. Internal forces are not used when checking equilibrium. These forces act in equal and opposite pairs inside the body, so they cancel each other. Because of that, they do not affect the overall motion or change in motion of the rigid body. The...

support reactions

Types of Structural Supports

Types of structural supports control how a coplanar force system moves and reacts under load. A coplanar force system is a set of forces that all lie in the same plane. The supports create reactions at the point of contact. These reactions help keep a structure stable under external forces. Supports work by stopping translation with an equal and opposite force. They can also stop rotation by applying a couple moment in the opposite direction. In structural design, these reactions are important...

internal forces and center of gravity

Forces Inside a Body and Balance

Internal forces and the center of gravity help explain how objects stay in balance. These mechanics ideas matter for structures, machines, and vehicles that must remain stable under different loads and conditions. Internal forces are created inside a body when its particles interact. They can appear as tension, compression, or shear forces. These forces act in collinear pairs with equal magnitude and opposite direction. Between connected parts, they cancel each other and help keep the body in...

alternative sets of equilibrium equations

alternative-sets-of-equilibrium-equations

Equilibrium Conditions for a Supported Plate

Equilibrium conditions for a supported plate are used to describe when forces and moments balance. In this state, the plate has no net movement and no rotation. Engineers use these equations to study how structures behave under external loads. In many cases, the standard equilibrium equations are enough. But some systems need an alternative set of equations to match the geometry of the support points. A rectangular plate supported at points A, B, and C is one example. For this plate, the...

two force member

Two-Force Body Equilibrium

A two-force body is a rigid body acted on by only two external forces. In equilibrium, those two forces must have the same magnitude, the same line of action, and opposite directions. This balance is what keeps the body at rest. For a plate with forces F1 and F2 applied at points A and B, equilibrium means the sum of moments about any axis is zero. If moments are summed about point A, the moment from F2 must be zero. That means the line of action of F2 must pass through point A. The same idea...

three force member

A three-force member is a rigid body acted on by three forces at three points. The forces must have concurrent lines of action. If the forces are parallel, their lines of action stay parallel instead. A dumpster provides the example used here. It is connected to a pin support at point A and to a pin on a hydraulic cylinder at point B. The hydraulic cylinder acts as a two-force member in equilibrium. The dumpster weight acts through the center of gravity, and the support reaction acts at point...

equations of equilibrium in three dimensions

equations-of-equilibrium-in-three-dimensions

Checking Force Balance in 3D Structures

Checking force balance in 3D structures is a key step when a system is at rest. The vector and scalar equations of equilibrium are used to test whether a body is stable and will not collapse or fall apart. These equations give a clear way to study the forces acting on a body. The vector equations of equilibrium require the vector sum of all external forces on a body to equal zero. They also require the vector sum of the couple moments and the moments of all forces about a point to equal zero.

support reactions in three dimensions

3D Support Types for Stability and Motion

Support reactions in three dimensions keep structures stable and in equilibrium. They stop unwanted translation and rotation, so a design can handle external forces safely and work as intended. These reactions are important in many structures and systems. A ball and socket joint is one support that allows free rotation about any axis. It does not provide a moment that resists turning. At the same time, it restricts motion in space with three reaction forces along the three dimensions. A...

constraints and statical determinacy

Constraints in Structural Equilibrium

Constraints in structural engineering control how a body can move and help keep it in mechanical equilibrium. A constraint is a restriction on motion. When the right number of constraints is used, the system can stay balanced with the fewest supports needed. A system with the proper number of supports is called statically determinate. In that case, the unknown reaction forces can be found from equations of equilibrium. These systems are the easiest to analyze and design because the forces can...

key terms and concepts

Learn how to analyze a three-force member with a free-body diagram, equilibrium equations, and a dumpster example to find unknown reaction forces.

Solving a Three-Force Member Example | JoVE K12

JoVE Core Mechanical Engineering offers concise, easy-to-understand animated videos covering key topics such as equilibrium, forces, truss analysis, and structural mechanics. Explore their real-world applications, and witness these concepts in action through scientist-led experiments.

mechanical engineering

Solving a Three-Force Member Example

Description

Transcript