Name: jib crane reaction forces in frames
Uploaded: 2023-09-22T11:49:25.000Z
Duration: 1 min 24 s
Channel: JoVE

풀리에서 외부 하중이 가해지는 지브 크레인을 고려하십시오.
크레인 부재의 치수를 알고 있는 경우 풀리가 마찰이 없다는 점을 고려할 때 핀 조인트의 반력은 얼마입니까?
이 시스템은 2 포스 멤버 BD와 멀티 포스 멤버 ABC로 구성된 프레임 구조입니다.
자유물체 다이어그램을 고려하고 하부 풀리 섹션에 대한 힘 평형 조건을 적용하면 케이블의 장력을 얻을 수 있습니다.
C 지점을 고려할 때 수직 케이블의 장력은 아래쪽을 향하고 수평 케이블의 경우 조인트 A를 향합니다.
부재 DB에서 힘 FBD는 슬로프 삼각형을 사용하여 표현할 수 있습니다.
조인트 A의 모멘트 평형 조건은 BD를 따라 힘을 제공합니다.
힘 평형 조건을 적용하면 조인트 A에서 수평 및 수직 반력이 계산됩니다.
이제 부재 BD에 대한 자유물체 다이어그램을 고려할 때 힘 평형 조건을 조인트 D에 적용하여 D에서 수평 및 수직 반력을 얻을 수 있습니다.

<ol>
	<li>히벨러, R.C. (2016). Engineering Mechanics \u2012 정역학 및 동역학. 뉴저지 호보켄: 피어슨 프렌티스 홀. 305쪽.</li>
	<li>맥주, F.P.; 존스턴, ER; 마주렉, D.F; 크롬웰, PJ 및 셀프, BP (2019). 엔지니어를 위한 벡터 역학 \u2012 Statics and Dynamics. 뉴욕 : McGraw-Hill. 330쪽</li>
	<li>Meriam, J.L., Kraige, L.G. 및 Bolton, J.N. (2020). 엔지니어링 역학 \u2012 정역학. 뉴저지 호보켄: 존 와일리. 200쪽</li>
</ol>

골조: 문제 해결 i

Frames: Problem Solving I

도르래에 외부 하중이 매달려 있는 지브 크레인을 생각해 보겠습니다. 크레인 부재의 치수가 그림에 나와 있습니다. 풀리에 마찰이 없다는 가정 하에 핀 조인트의 반력을 결정하려면 프레임 구조에 대한 체계적인 분석이 필요합니다.

<img alt="Figure 1" src="/files/ftp_upload/14291/14291_PT_Fig_1v2.svg" style="text-align: center; height: 350px;" />

시스템에는 두 가지 주요 구조 구성 요소가 있습니다. 즉, 이중 힘 구성원 BD과 다중 힘 구성원 ABC입니다. 이중 힘 부재 BD는 추가 힘이 작용하지 않고 양 끝 B 및 D에서만 힘을 받는 직선 요소를 나타냅니다. 길이를 따라. 이러한 힘은 크기는 동일하지만 방향이 반대이므로 부재는 순수한 인장 또는 압축 상태가 됩니다. 반면, 다중 힘 부재 ABC는 길이를 따라 분산된 두 가지 이상의 힘을 받습니다. 이러한 힘에는 외부 하중, 핀 조인트의 반력, 케이블에 의해 가해지는 힘이 포함될 수 있습니다. ABC 부재에 작용하는 여러 힘으로 인해 단순한 2힘 부재 BD에 비해 더 복잡한 응력 분포를 경험하게 됩니다.

<img alt="Figure 2" src="/files/ftp_upload/14291/14291_PT_Fig_2v2.svg" style="text-align: center; height: 350px;" />

하부 풀리 섹션을 고려하면 부하 중량이 케이블의 장력 균형을 유지하여 각 케이블에 대해 10kN의 위쪽 장력이 발생합니다. 이제 상부 풀리 섹션을 고려하면 수직 케이블의 장력 T은 아래쪽을 향하고 수평 케이블의 경우 조인트 A를 향합니다. 동일한 연속 케이블 시스템의 일부이므로 수직 케이블의 장력도 10kN입니다.

부재 DB에서 힘 FBD은 경사 삼각형을 사용하여 그 수평 및 수직 성분으로 분해될 수 있습니다.
. 접합 A 의 모멘트 평형 조건은 FBD를 50kN으로 제공합니다.

수평 힘 평형 조건은 접합 A에 적용될 수 있습니다.

<img alt="Equation 1" src="/files/ftp_upload/14291/14291_PT_Equation_1v2.svg" style="text-align: center; height: 15px;" />

길이 AB, AC 및 풀리 반경 C의 값을 대체하면 힘 FBD 는 50kN으로 얻어집니다.

수평 힘 평형 조건은 A에서의 반력을 40kN으로 제공합니다.

<img alt="Equation 2" src="/files/ftp_upload/14291/14291_PT_Equation_2v2.svg" style="text-align: center; height: 15px;" />

마찬가지로 수직력 평형 조건을 사용하면 A에서의 수직 반력은 -20kN으로 추정됩니다.

<img alt="Equation 3" src="/files/ftp_upload/14291/14291_PT_Equation_3v2.svg" style="text-align: center; height: 15px;" />

힘 평형 조건을 조인트 D에 적용하여 D에서 수평 및 수직 반력을 얻을 수 있습니다.

<img alt="Equation 4" src="/files/ftp_upload/14291/14291_PT_Equation_4v2.svg" style="text-align: center; height: 15px;" />

<img alt="Equation 5" src="/files/ftp_upload/14291/14291_PT_Equation_5v2.svg" style="text-align: center; height: 15px;" />

얻어진 결과는 D 지점의 수평 및 수직 반력이 각각 -30kN 및 40kN임을 나타냅니다.

골조: 문제 해결 I

풀리에 매달린 외부 하중이 있는 지브 크레인을 생각해 보십시오. 크레인 부재의 치수가 그림에 표시되어 있습니다. 체계적인 분석 ...

Education

교육

JoVE Core

Mechanical Engineering

기계공학

Unit 1

제1단원

Structural Analysis

구조 해석

KEY TERMS AND CONCEPTS

주요 용어 및 개념

jib crane reaction forces in frames

Jib crane reaction forces in frames are found by analyzing the pin joints, the cable tension, and the load carried by the pulley. The structure in this problem has an external load suspended from the pulley, and the member sizes are shown in the figure. Because the pulleys are frictionless, the force balance can be worked out step by step.

The frame has two main parts. Member BD is a two-force member, which means it is a straight part loaded only at its two ends, D and B. Those end forces are equal in size and opposite in direction, so the member is in either tension or compression. Member ABC is a multi-force member, so it carries more than two forces along its length. These forces include the pin reactions, the external load, and the cable force, which makes its stress state more complex.

The lower pulley section shows that the load weight is balanced by the cable tension. That gives an upward tension of 10 kN in each cable. In the upper pulley section, the tension T in the vertical cable points downward, while the horizontal cable tension points toward joint A. The vertical cable tension is also 10 kN because it is part of the same continuous cable system.

To solve member DB, the force FBD is split into horizontal and vertical parts with a slope triangle. A moment balance at joint A gives FBD as 50 kN. The horizontal force balance at A then uses the lengths AB and AC and the pulley radius at C to confirm this value. From that balance, the reaction at A is 40 kN in the horizontal direction, and the vertical reaction at A is -20 kN. The force balance at joint D gives the reaction forces there as -30 kN horizontally and 40 kN vertically.

Jib Crane Reaction Forces in Frames

introduction to structures

Structure Types and Force Paths

Structures are systems of interconnected members that support or transfer forces and handle the loads placed on them. Engineers can find the internal forces in a structure by breaking it apart and drawing free-body diagrams for individual members or groups of members. This helps show how structural elements behave and how the whole system stays stable under load. There are three main categories of structures: trusses, frames, and machines. Trusses are stationary structures that stay rigid when...

simple trusses

Simple Trusses and Triangular Frames

Simple trusses are planar trusses built from slender members joined at points in one flat plane. They are designed to carry external loads while using less material and keeping weight low. A truss is a structural framework, and the simple truss is one of its most basic forms. The most basic simple truss uses three members arranged in a triangle. That triangular shape is naturally stable and rigid because of its geometry. It gives students a clear starting point for understanding how larger...

method of joints

Truss Forces Using the Method of Joints

The method of joints is used to find the forces in structural trusses. It relies on equilibrium, which means the forces at a joint must balance. In this model, the truss members are connected by frictionless pins. For a plane truss, the members lie in the same plane. That means each joint has a coplanar and concurrent force system. The analysis begins by identifying and labeling all the joints in the truss. Next, each joint is isolated and shown in a free-body diagram. This diagram includes...

method of joints: problem solving i

Truss Joint Force Analysis by Equilibrium

The method of joints uses equilibrium to find forces in structural trusses. It treats the truss members as being joined by frictionless pins. For each joint, the forces acting there must balance. That balance makes it possible to solve for the member forces one joint at a time. Here, a truss has 20 N acting at joint C and 10 N acting at joint D. The method of joints is used to find FCB, FDC, FDB, and FAD. The analysis starts with a free-body diagram of joint C. Free-body diagram means drawing...

method of joints: problem solving ii

Truss Force Analysis at Joints A to E

Truss force analysis at joints A to E uses the method of joints to find the force in each member. The truss has frictionless joints, a wall support, and a roller support. A 150 N force is applied at joint A, and the member forces are solved from joint to joint. First, the angle between members AC and AB is found using the inverse tangent of the ratio of BC to AB. This gives an angle of 67.38°. A free-body diagram of joint A is then drawn, and each unknown force is split into vertical and...

zero-force member

Finding Zero-Force Members in Trusses

Trusses are frameworks made of slender members that connect at their ends by joints. Engineers and architects use them to stabilize and strengthen structures such as bridges, roofs, and towers. Truss members carry loads through tension and compression so the structure can handle external forces. A key part of truss analysis is spotting zero-force members. A zero-force member is a truss member that carries no stress under loading conditions. During analysis, some members may show zero force,...

method of sections

Truss Member Force Analysis by Sections

Truss member force analysis by sections finds the force in selected members of a truss. In this problem, forces F1 and F2 act at joints B and D. The goal is to determine the forces in members EF, DC, and DF. The method uses the idea that a truss in equilibrium also has each of its sections in equilibrium. A free-body diagram of the whole truss is drawn first. The moment equation about joint A is then used to estimate the support reaction at point E. Next, a cut is made along a sectional plane...

method of sections: problem solving i

Truss Member Force Calculation by Sections

Truss member forces can be found with the method of sections in a symmetrical roof truss. The structure here includes vertical, diagonal, and horizontal members. Each horizontal member is 4 m long. The vertical members FB and HD are 4 m long, and member GC is 6 m long. The roof truss carries loads at several joints. Joints F, G, and H each have a 2 kN load. Joints A and E each have a 1 kN load. To start the analysis, moment equilibrium is used at point A. The force and distance values are...

method of sections: problem solving ii

Truss member force analysis by sections finds the forces in selected members of a wall-mounted truss. The structure here includes diagonal, vertical, and horizontal members. The known loads and member lengths are used to solve for the forces in CB, GB, and GH. A cut is made through members CB, GB, and GH. The right side of the truss is then isolated as a free-body diagram. Next, the moment equilibrium equation is taken about point G. This step gives the force in member CB as 4 kN, and the...

space trusses

Space Truss Forces and Stability

A space truss is a three-dimensional truss made from members joined at their ends. It is the 3D version of a planar truss. These frameworks often use ball-and-socket joints, which help the structure stay stable and flexible under load. Space trusses are used in many construction projects because they can adapt to complex forces. Their basic building block is the tetrahedron. A tetrahedron has six members and four triangular faces. Engineers can build larger space trusses by adding one joint...

space trusses: problem solving

3D Truss Force Analysis with Joint Equilibrium

A space truss is a three-dimensional truss structure made of members connected at their ends. It often uses ball-and-socket joints to form a stable and versatile framework. Because it can handle complex loads, this type of structure is used in many construction projects. The example begins with a tripod made from a tetrahedral space truss. A ball-and-socket joint is located at C. The height and the lengths of the horizontal and vertical members are known. A tensile force is applied at joint D.

frames

Frame Analysis in Structural Systems

Frames are important parts of many mechanical and structural systems used every day. They are valued for stability and for their ability to bear heavy loads. A frame is built from two-force members and multi-force members, and the parts are connected with pin joints. Trusses are different because they are made entirely of two-force members. Frames appear in many practical settings. They can support beams and columns in buildings. They are also used in automobile chassis construction. In the...

frames: problem solving i

Jib crane reaction forces in frames are found by analyzing the pin joints, the cable tension, and the load carried by the pulley. The structure in this problem has an external load suspended from the pulley, and the member sizes are shown in the figure. Because the pulleys are frictionless, the force balance can be worked out step by step. The frame has two main parts. Member BD is a two-force member, which means it is a straight part loaded only at its two ends, D and B. Those end forces are...

frames: problem solving ii

Hydraulic Hoist Force Analysis

Hydraulic hoist force analysis shows how to find the forces in key members of a simple frame. The load is 1 kN, and the structure is represented with known member dimensions. In this setup, BF and BD act as two-force members. EFG and EDC are multi-force members, so each one is analyzed with a free-body diagram. The first step is to study member EFG. The inclined force in BF is split into vertical and horizontal parts. Then the moment equilibrium condition is applied at joint E. Using this...

machines

Cutting Pliers as a Force-Multiplying Machine

Cutting pliers are a machine that helps transmit force through movable, pin-connected members. In this example, the handles and cutting edges work together to cut wire by turning an input force into a larger output force at the jaws. When equal and opposite forces are applied to the handles, the cutting edges move toward each other. They then apply equal and opposite reaction forces to the wire. These reaction forces are greater than the forces applied to the handles, which is why the wire can...

machines: problem solving i

Toggle Clamp Force Analysis

A toggle clamp can be analyzed to find its clamping force from a known handle force. In this example, a 200 N force is applied at the handle. The clamp is used in holding and clamping tasks in woodworking, metalworking, and assembly operations. The toggle clamp is a machine structure made of movable, pin-connected multi-force members. These members form a stabilized system that transmits force. Member CD is a two-force member, which means the forces at its ends are equal in magnitude and...

machines: problem solving ii

Lifting Tong Force Analysis

Lifting tong force analysis shows how forces move through a pin-connected machine. The structure uses movable sections DAF and CBG with member AB linking them together. Because these parts work as connected members, the load can be studied with equilibrium methods. The example starts with a 100 kg load at point E. The load weight is found by multiplying mass by gravity, which gives 981 N. The cable tension acts upward and balances that weight. Since the structure is symmetrical at E, the...

key terms and concepts

Analyze a jib crane frame with a frictionless pulley, two-force member BD, and multi-force member ABC to find reaction forces at joints A and D.

Jib Crane Reaction Forces in Frames | JoVE K12

JoVE Core Mechanical Engineering offers concise, easy-to-understand animated videos covering key topics such as equilibrium, forces, truss analysis, and structural mechanics. Explore their real-world applications, and witness these concepts in action through scientist-led experiments.

mechanical engineering

Jib Crane Reaction Forces in Frames

Description

Transcript

Tags