Name: hydraulic hoist force analysis
Uploaded: 2023-09-22T11:49:25.000Z
Duration: 1 min 26 s
Channel: JoVE

하중을 지지하는 유압 호이스트를 고려하십시오.
이 프레임 구조의 단순화된 개략도를 가정할 때, 부재 치수와 하중의 무게가 알려진 경우 BD 및 BF 부재에 어떤 힘이 작용합니까?
여기서 BF와 BD는 두 개의 포스 멤버이고 EFG와 EDC는 다중 포스 멤버입니다.
모든 힘을 나타내는 멤버 EFG에 대한 자유물체 다이어그램이 그려집니다.
힘 FBF 의 수직 및 수평 구성 요소는 슬로프 삼각형을 사용하여 표현할 수 있습니다.
조인트 E의 모멘트 평형 조건은 힘 F BF 를 제공합니다.
그런 다음 조인트 E에서 수평 힘 평형 조건을 적용하여 E에서 수평 반력을 평가합니다.
마찬가지로, 수직 힘 평형 조건은 조인트 E에서 수직 반력을 제공합니다.
이제 멤버 EDC에 대한 자유물체 다이어그램을 그리면 BD를 따른 힘의 구성 요소를 다른 기울기 삼각형을 사용하여 표현할 수 있습니다.
점 C에서 모멘트 평형 조건을 적용하면 힘 F BD 가 계산됩니다.

<ol>
	<li>히벨러, R.C. (2016). Engineering Mechanics \u2012 정역학 및 동역학. 뉴저지 호보켄: 피어슨 프렌티스 홀. 305쪽.</li>
	<li>맥주, F.P.; 존스턴, ER; 마주렉, D.F; 크롬웰, PJ 및 셀프, BP (2019). 엔지니어를 위한 벡터 역학 \u2012 Statics and Dynamics. 뉴욕 : McGraw-Hill. 330쪽</li>
	<li>Meriam, J.L., Kraige, L.G. 및 Bolton, J.N. (2020). 엔지니어링 역학 \u2012 정역학. 뉴저지 호보켄: 존 와일리. 200쪽</li>
</ol>

골조: 문제 해결 ii

1kN의 하중을 지지하는 유압 호이스트를 생각해 보겠습니다. 이 프레임 구조의 단순화된 도식적 표현을 가정하면 BD 및 BF 부재에 작용하는 힘을 결정할 수 있습니다.

<img alt="Figure 1" src="/files/ftp_upload/14292/14292_PT_Fig_1v2.svg" style="text-align: center; height: 350px;" />

부재 치수와 하중 무게는 알려진 매개변수입니다. 이 구조는 BF와 BD가 2력부재로 작용하는 반면, EFG와 EDC가 있는 다중력 부재인 골조로 간주될 수 있습니다.

EFG 구성원에 대한 자유물체도가 고려됩니다. 경사력 FBF은 수직 및 수평 성분으로 분해될 수 있습니다. 순간 평형 조건이 접합부에E에 적용됩니다.

<img alt="Equation 1" src="/files/ftp_upload/14292/14292_PT_Equation_1v2.svg" style="text-align: center; height: 15px;" />

FBF 힘은 1.546kN으로 계산됩니다. 그런 다음 관절 E에 수평 힘 평형 조건이 적용됩니다.

<img alt="Equation 2" src="/files/ftp_upload/14292/14292_PT_Equation_2v2.svg" style="text-align: center; height: 15px;" />

FBF의 수평성분 값을 평형방정식에 대입하면 E에서의 수평반력은 0.375kN으로 계산되며, 마찬가지로 수직력평형조건이 적용됩니다.

<img alt="Equation 3" src="/files/ftp_upload/14292/14292_PT_Equation_3v2.svg" style="text-align: center; height: 15px;" />

접합부 E에서 계산된 수직 반력은 0.500kN입니다.

이제 EDC 멤버에 대한 자유물체도를 고려합니다. FBD 의 수평 및 수직 구성 요소는 경사 삼각형을 사용하여 표현할 수 있습니다. C 지점의 순간 평형 조건이 적용됩니다.

<img alt="Equation 4" src="/files/ftp_upload/14292/14292_PT_Equation_4v2.svg" style="text-align: center; height: 15px;" />

FBD 힘은 1.677kN으로 계산됩니다.

골조: 문제 해결 II

1kN의 하중을 지지하는 유압 호이스트를 고려하십시오. 이 프레임 구조의 단순화된 개략도를 가정하면 BD와 ...

Education

교육

JoVE Core

Mechanical Engineering

기계공학

Unit 1

제1단원

Structural Analysis

구조 해석

KEY TERMS AND CONCEPTS

주요 용어 및 개념

Frames: Problem Solving II

hydraulic hoist force analysis

Hydraulic hoist force analysis shows how to find the forces in key members of a simple frame. The load is 1 kN, and the structure is represented with known member dimensions. In this setup, BF and BD act as two-force members. EFG and EDC are multi-force members, so each one is analyzed with a free-body diagram.

The first step is to study member EFG. The inclined force in BF is split into vertical and horizontal parts. Then the moment equilibrium condition is applied at joint E. Using this step, the force in BF is found to be 1.546 kN.

Next, the horizontal force equilibrium at joint E is used. The horizontal part of the BF force is substituted into the equation. This gives the horizontal reaction force at E as 0.375 kN. The vertical force equilibrium at the same joint is also applied. The vertical reaction force at E is calculated as 0.500 kN.

A free-body diagram for member EDC is then considered. The horizontal and vertical parts of FBD are written using a slope triangle. Finally, the moment equilibrium condition at point C is applied. This calculation gives the force in BD as 1.677 kN.

Hydraulic Hoist Force Analysis

introduction to structures

Structure Types and Force Paths

Structures are systems of interconnected members that support or transfer forces and handle the loads placed on them. Engineers can find the internal forces in a structure by breaking it apart and drawing free-body diagrams for individual members or groups of members. This helps show how structural elements behave and how the whole system stays stable under load. There are three main categories of structures: trusses, frames, and machines. Trusses are stationary structures that stay rigid when...

simple trusses

Simple Trusses and Triangular Frames

Simple trusses are planar trusses built from slender members joined at points in one flat plane. They are designed to carry external loads while using less material and keeping weight low. A truss is a structural framework, and the simple truss is one of its most basic forms. The most basic simple truss uses three members arranged in a triangle. That triangular shape is naturally stable and rigid because of its geometry. It gives students a clear starting point for understanding how larger...

method of joints

Truss Forces Using the Method of Joints

The method of joints is used to find the forces in structural trusses. It relies on equilibrium, which means the forces at a joint must balance. In this model, the truss members are connected by frictionless pins. For a plane truss, the members lie in the same plane. That means each joint has a coplanar and concurrent force system. The analysis begins by identifying and labeling all the joints in the truss. Next, each joint is isolated and shown in a free-body diagram. This diagram includes...

method of joints: problem solving i

Truss Joint Force Analysis by Equilibrium

The method of joints uses equilibrium to find forces in structural trusses. It treats the truss members as being joined by frictionless pins. For each joint, the forces acting there must balance. That balance makes it possible to solve for the member forces one joint at a time. Here, a truss has 20 N acting at joint C and 10 N acting at joint D. The method of joints is used to find FCB, FDC, FDB, and FAD. The analysis starts with a free-body diagram of joint C. Free-body diagram means drawing...

method of joints: problem solving ii

Truss Force Analysis at Joints A to E

Truss force analysis at joints A to E uses the method of joints to find the force in each member. The truss has frictionless joints, a wall support, and a roller support. A 150 N force is applied at joint A, and the member forces are solved from joint to joint. First, the angle between members AC and AB is found using the inverse tangent of the ratio of BC to AB. This gives an angle of 67.38°. A free-body diagram of joint A is then drawn, and each unknown force is split into vertical and...

zero-force member

Finding Zero-Force Members in Trusses

Trusses are frameworks made of slender members that connect at their ends by joints. Engineers and architects use them to stabilize and strengthen structures such as bridges, roofs, and towers. Truss members carry loads through tension and compression so the structure can handle external forces. A key part of truss analysis is spotting zero-force members. A zero-force member is a truss member that carries no stress under loading conditions. During analysis, some members may show zero force,...

method of sections

Truss Member Force Analysis by Sections

Truss member force analysis by sections finds the force in selected members of a truss. In this problem, forces F1 and F2 act at joints B and D. The goal is to determine the forces in members EF, DC, and DF. The method uses the idea that a truss in equilibrium also has each of its sections in equilibrium. A free-body diagram of the whole truss is drawn first. The moment equation about joint A is then used to estimate the support reaction at point E. Next, a cut is made along a sectional plane...

method of sections: problem solving i

Truss Member Force Calculation by Sections

Truss member forces can be found with the method of sections in a symmetrical roof truss. The structure here includes vertical, diagonal, and horizontal members. Each horizontal member is 4 m long. The vertical members FB and HD are 4 m long, and member GC is 6 m long. The roof truss carries loads at several joints. Joints F, G, and H each have a 2 kN load. Joints A and E each have a 1 kN load. To start the analysis, moment equilibrium is used at point A. The force and distance values are...

method of sections: problem solving ii

Truss member force analysis by sections finds the forces in selected members of a wall-mounted truss. The structure here includes diagonal, vertical, and horizontal members. The known loads and member lengths are used to solve for the forces in CB, GB, and GH. A cut is made through members CB, GB, and GH. The right side of the truss is then isolated as a free-body diagram. Next, the moment equilibrium equation is taken about point G. This step gives the force in member CB as 4 kN, and the...

space trusses

Space Truss Forces and Stability

A space truss is a three-dimensional truss made from members joined at their ends. It is the 3D version of a planar truss. These frameworks often use ball-and-socket joints, which help the structure stay stable and flexible under load. Space trusses are used in many construction projects because they can adapt to complex forces. Their basic building block is the tetrahedron. A tetrahedron has six members and four triangular faces. Engineers can build larger space trusses by adding one joint...

space trusses: problem solving

3D Truss Force Analysis with Joint Equilibrium

A space truss is a three-dimensional truss structure made of members connected at their ends. It often uses ball-and-socket joints to form a stable and versatile framework. Because it can handle complex loads, this type of structure is used in many construction projects. The example begins with a tripod made from a tetrahedral space truss. A ball-and-socket joint is located at C. The height and the lengths of the horizontal and vertical members are known. A tensile force is applied at joint D.

frames

Frame Analysis in Structural Systems

Frames are important parts of many mechanical and structural systems used every day. They are valued for stability and for their ability to bear heavy loads. A frame is built from two-force members and multi-force members, and the parts are connected with pin joints. Trusses are different because they are made entirely of two-force members. Frames appear in many practical settings. They can support beams and columns in buildings. They are also used in automobile chassis construction. In the...

frames: problem solving i

Jib Crane Reaction Forces in Frames

Jib crane reaction forces in frames are found by analyzing the pin joints, the cable tension, and the load carried by the pulley. The structure in this problem has an external load suspended from the pulley, and the member sizes are shown in the figure. Because the pulleys are frictionless, the force balance can be worked out step by step. The frame has two main parts. Member BD is a two-force member, which means it is a straight part loaded only at its two ends, D and B. Those end forces are...

frames: problem solving ii

Hydraulic hoist force analysis shows how to find the forces in key members of a simple frame. The load is 1 kN, and the structure is represented with known member dimensions. In this setup, BF and BD act as two-force members. EFG and EDC are multi-force members, so each one is analyzed with a free-body diagram. The first step is to study member EFG. The inclined force in BF is split into vertical and horizontal parts. Then the moment equilibrium condition is applied at joint E. Using this...

machines

Cutting Pliers as a Force-Multiplying Machine

Cutting pliers are a machine that helps transmit force through movable, pin-connected members. In this example, the handles and cutting edges work together to cut wire by turning an input force into a larger output force at the jaws. When equal and opposite forces are applied to the handles, the cutting edges move toward each other. They then apply equal and opposite reaction forces to the wire. These reaction forces are greater than the forces applied to the handles, which is why the wire can...

machines: problem solving i

Toggle Clamp Force Analysis

A toggle clamp can be analyzed to find its clamping force from a known handle force. In this example, a 200 N force is applied at the handle. The clamp is used in holding and clamping tasks in woodworking, metalworking, and assembly operations. The toggle clamp is a machine structure made of movable, pin-connected multi-force members. These members form a stabilized system that transmits force. Member CD is a two-force member, which means the forces at its ends are equal in magnitude and...

machines: problem solving ii

Lifting Tong Force Analysis

Lifting tong force analysis shows how forces move through a pin-connected machine. The structure uses movable sections DAF and CBG with member AB linking them together. Because these parts work as connected members, the load can be studied with equilibrium methods. The example starts with a 100 kg load at point E. The load weight is found by multiplying mass by gravity, which gives 981 N. The cable tension acts upward and balances that weight. Since the structure is symmetrical at E, the...

key terms and concepts

Analyze a hydraulic hoist frame with free-body diagrams, equilibrium equations, and two-force members to find forces in BF, BD, and reactions at E.

Hydraulic Hoist Force Analysis | JoVE K12

JoVE Core Mechanical Engineering offers concise, easy-to-understand animated videos covering key topics such as equilibrium, forces, truss analysis, and structural mechanics. Explore their real-world applications, and witness these concepts in action through scientist-led experiments.

mechanical engineering

Hydraulic Hoist Force Analysis

Description

Transcript

Tags