Name: beam load analysis with shear diagrams
Uploaded: 2025-05-22T09:06:04.000Z
Duration: 1 min 24 s
Channel: JoVE

두 개의 집중 하중과 분산 하중을 지지하는 빔을 생각해 보십시오. 빔에 대한 전단 및 굽힘 모멘트 다이어그램을 그립니다.
먼저 빔의 자유물체 다이어그램을 그리고 평형 방정식을 사용하여 반력을 얻습니다.
다음으로, 빔을 다른 섹션으로 나누고 각 섹션의 자유물체 다이어그램을 그립니다. 단면에 대한 평형 방정식을 적용하면 개별 단면에 대한 전단을 결정할 수 있습니다.
전단력은 집중 하중과 반력 사이에서 일정하게 유지되는 반면 분산 하중 단면에서 일정한 기울기에 따라 선형으로 변합니다.
두 점 사이의 전단 곡선 아래 면적은 동일한 두 점 사이의 굽힘 모멘트 변화와 같습니다.
빔 끝의 굽힘 모멘트 0을 고려하고 굽힘 모멘트의 변화와 전단 곡선 아래 면적 사이의 관계를 상기하여 각 점의 굽힘 모멘트를 계산합니다.
굽힘 모멘트 다이어그램은 일정한 전단이 있는 영역에 대해서는 알려진 점을 직선으로, 선형 전단이 있는 영역에 대해서는 포물선을 연결하여 그려집니다.

<ol>
	<li>맥주, F.P.; 존스턴, ER; 마주렉, D.F; 크롬웰, PJ 및 Self, BP(2019). 엔지니어를 위한 벡터 역학 \u2012 Statics and Dynamics. 뉴욕 : McGraw-Hill. 394-395쪽.</li>
</ol>

전단 및 굽힘 모멘트 자유물체도: 문제 해결

집중하중과 분산하중을 지지하는 보를 분석할 때 전단 및 굽힘 모멘트 도표를 그리는 것이 필수적입니다. 이러한 도표는 보에 작용하는 내부력과 모멘트를 이해하는 데 도움이 되며, 이는 안전하고 효율적인 구조물을 설계하는 데 매우 중요합니다. 전단 및 굽힘 모멘트 도표를 작성하려면 다음 단계를 수행합니다.
자유물체도 그리기: 지지대의 집중하중, 분산하중, 반력을 포함한 전체 보의 자유물체도 그리기로 시작합니다. 평형방정식(힘과 모멘트의 합이 0)을 적용하여 지지대의 반력을 결정할 수 있습니다.
보를 단면으로 나눕니다: 보를 하중분포에 따라 다른 단면으로 나눕니다. 예를 들어, 집중하중, 집중하중과 반력 사이의 영역, 그리고 분산하중 내에 별도의 단면을 만들 수 있습니다. 각 단면에 대한 자유물체도를 그립니다.
전단력 결정: 각 절편의 자유물체도에 평형방정식을 적용하여 개별 절편에 대한 전단력을 계산합니다. 집중하중과 반력 사이에서 전단력은 일정한 기울기로 선형적으로 변화하는 반면 분산하중 절편에서는 일정한 기울기로 변화한다는 점에 유의해야합니다.
굽힘 모멘트 계산: 보를 따라 다양한 지점에서 굽힘 모멘트를 찾으려면 두 지점 사이의 전단 곡선 아래 면적이 해당 지점 사이의 굽힘 모멘트 변화와 동일하다는 것을 기억해야합니다.
전단 및 굽힘 모멘트 다이어그램 그리기: 마지막으로 계산된 값을 플롯하여 전단력 및 굽힘 모멘트 다이어그램을 작성합니다.

집중 하중과 분산 하중을 지지하는 빔을 분석할 때 전단 및 굽힘 모멘트 다이어그램을 그리는 것이 필수적입니다. 이 다이어그램은 ...

shear-and-bending-moment-diagram-problem-solving

Education

교육

JoVE Core

Mechanical Engineering

기계공학

Unit 1

제1단원

Internal Forces

내력

KEY TERMS AND CONCEPTS

주요 용어 및 개념

Shear and Bending Moment Diagram: Problem Solving

beam load analysis with shear diagrams

Beam load analysis uses shear and bending moment diagrams to track the internal forces in a beam. These diagrams are important when a beam carries concentrated loads and a distributed load. They help show how the beam responds so structures can be designed safely and efficiently.

The first step is to draw a free-body diagram of the whole beam. A free-body diagram shows the concentrated loads, the distributed load, and the reaction forces at the supports. Use the equilibrium equations, where the sum of forces and the sum of moments equal zero, to find the support reactions.

Next, divide the beam into sections based on where the loading changes. Sections may be placed between concentrated loads, between a load and a reaction force, or within the distributed load region. Then draw a free-body diagram for each section so the forces on that part of the beam are clear.

After that, determine the shear force in each section using equilibrium. Shear force stays constant between concentrated loads and reaction forces. In the distributed load section, it changes linearly with a constant slope.

Finally, use the shear curve to find bending moments. The area under the shear curve between two points equals the change in bending moment over that span. Plot the calculated values to create the shear force diagram and the bending moment diagram.

Beam Load Analysis with Shear Diagrams

sign convention

Beam Forces: Tension, Shear, and Bending

Beam analysis depends on the internal forces and moments inside a structure. These include normal force, shear force, and bending moment. Engineers use the method of sections to cut the beam and find these values. A sign convention helps show whether each result is positive or negative. Normal force acts perpendicular to the beam’s cross-section. It can pull the material in tension or push it in compression. Tension is taken as positive, while compression is taken as negative. This makes it...

normal and shear force

Beam Loads and Internal Forces

Beam loads create internal forces inside a structure. Weight, pressure, and other external forces can all act on a beam. These internal forces affect the beam’s stability and strength. Engineers study these forces to find their size and direction. A common approach is the method of sections. In this method, an imaginary cut is made at a chosen point on the beam, and the forces at that section are analyzed. One internal force is the normal force, also called the axial force. It acts...

bending and torsional moments

Forces That Bend and Twist Materials

Bending and torsional moments describe how materials respond to force. These ideas are important in structural engineering because they help explain how beams, rulers, and screws change shape under load. A moment depends on both the size of the force and the distance from the point of interest to the force’s line of action. A bending moment forms when an external force makes a structural element bend. If the element bends upward, the top side is in compression and the bottom side is in tension.

internal loadings in structural members: problem solving

internal-loadings-in-structural-members-problem-solving

Beam Internal Force Analysis at Point A

Beam internal force analysis shows how normal force, shear force, and bending moment act inside a structural member. These internal loadings help engineers check whether a beam can support the external forces applied to it. The example uses a beam OC that weighs 5 kN and is inclined at 53.13° with the horizontal. The beam is supported at both ends. The goal is to find the internal loadings at point A. The first step is to find the reaction force at point C. This is done by taking the moment...

beams

Beam Types and Support Conditions

Beams are key parts of structural engineering and construction. They support loads that act at different points along their length. Engineers use beam shape and support conditions to understand how a beam will perform. Beams can be classified by geometry. Straight beams are the most common and have a constant cross-section along their length. Tapered beams change in cross-section from one end to the other, while curved beams have a curved shape. Beam cross-section also matters. Common shapes...

shear diagram

Beam Shear Force Diagram

Beam shear force diagrams show how shear changes along the length of a supported beam. In beam mechanics, they help students track the internal shear force caused by perpendicular loads. The beam AB in this example is supported at both ends, so the first step is to draw a free-body diagram that shows the external forces and internal reactions. The reaction forces at supports A and B are found with equilibrium equations for force and moment. For the beam shown, the vertical reaction at A is 24...

bending moment diagram

Beam Load Analysis with Moment Diagrams

Beam load analysis uses a bending moment diagram to show how bending changes along the length of a beam. This diagram helps engineers and designers check whether a structure can handle applied forces. It is also useful for parts such as shelving arms, which must resist forces and moments from a load. To build the diagram, start by finding the reactive forces and any couple moments on the beam. In some cases, especially when a beam is inclined, these forces must be resolved into components that...

relation between the distributed load and shear

relation-between-the-distributed-load-and-shear

Shear Change Under Distributed Loading

Shear force changes along a beam under a distributed load. In structural analysis, this relationship helps explain how beams respond to loading conditions that also include concentrated loads and a couple moment. To study the link, consider a small beam section that has no concentrated load or couple moment on it. Draw a free-body diagram for that elemental section. It includes the distributed load along the beam, the shear force V(x) on the right-hand side of the cut, and a small added shear...

relation between the shear and bending moment

relation-between-the-shear-and-bending-moment

Shear and Moment Diagrams in Beam Loads

Shear and moment diagrams help show how a beam responds to loads. A beam can carry a distributed load, concentrated loads, and a couple moment. These loads create internal shear forces and bending moments. The beam is examined by isolating a small elemental section and drawing a free-body diagram. For that section to stay in equilibrium, the moment on the right side must be slightly larger than the moment on the left side. The distributed load also has a resultant force that acts at a...

shear and bending moment diagram: problem solving

Beam load analysis uses shear and bending moment diagrams to track the internal forces in a beam. These diagrams are important when a beam carries concentrated loads and a distributed load. They help show how the beam responds so structures can be designed safely and efficiently. The first step is to draw a free-body diagram of the whole beam. A free-body diagram shows the concentrated loads, the distributed load, and the reaction forces at the supports. Use the equilibrium equations, where...

cable subjected to concentrated loads

Finding Tension in a Loaded Cable

Flexible cables can carry vertical point loads between two fixed supports. The cable is treated as flexible, inextensible, and nearly weightless. Under these conditions, it changes shape to form straight-line segments, and each segment carries a constant tensile force. To analyze the cable, a free-body diagram is drawn for the whole cable. This helps identify the reaction forces at the supports. In many cases, the number of unknown reaction components is greater than the available equilibrium...

cable subjected to a distributed load

Finding Cable Shape Under Distributed Load

Cable shape under a distributed load is found by analyzing the forces along a small piece of the cable. This method is important in suspension bridge design because the main cables must carry changing loads safely. The load causes the tensile force in the cable to change, and it also creates cable deformation. The analysis starts with a free-body diagram of a short cable segment. The diagram shows the distributed load and the change in tensile force across that segment. Equilibrium equations...

cable subjected to its own weight

Cable Sag Under Its Own Weight

Overhead power transmission cables sag under their own weight, and that shape affects how they carry electricity across long distances. To study this behavior, the cable is analyzed with a generalized loading function. This function treats the load along the cable's arc length instead of its projected length, which gives a more accurate picture of the cable's response. The analysis then focuses on a small cable segment. A free-body diagram is drawn to show the forces acting on that segment.

cable: problem solving

Cable Tension Under Uniform Loading

Cable tension under uniform loading is found by analyzing a cable fixed between two supports. The problem starts with the support conditions and the load on the cable. From there, the cable’s shape must be described with an equation that matches the curve formed by the load. The next step is to integrate the shape equation to get the cable’s shape function. This makes it possible to solve for constants in the equation. The boundary condition at the origin gives one constant. The slope, which...

key terms and concepts

Learn how to analyze a beam with concentrated and distributed loads by finding support reactions, shear force, and bending moment diagrams.

Beam Load Analysis with Shear Diagrams | JoVE K12

JoVE Core Mechanical Engineering offers concise, easy-to-understand animated videos covering key topics such as equilibrium, forces, truss analysis, and structural mechanics. Explore their real-world applications, and witness these concepts in action through scientist-led experiments.

mechanical engineering

Beam Load Analysis with Shear Diagrams

Description

Transcript