Name: finding force on a curved plate in water
Uploaded: 2023-09-22T11:49:33.000Z
Duration: 1 min 12 s
Channel: JoVE

곡선 플레이트가 잠기면 플레이트에 수직으로 작용하는 압력은 크기와 방향 모두에서 지속적으로 변경됩니다.
결과적인 힘과 그 위치를 결정하는 한 가지 방법은 힘의 수평 및 수직 구성 요소를 계산하는 것입니다.
이를 위해 2차원에서 등가 하중을 사용하여 플레이트에 작용하는 분산 하중을 나타냅니다.
블록 내에 포함된 물의 무게로 인한 힘의 크기는 블록의 중심을 통해 작용합니다.
또한 블록의 수직 및 수평 측면을 따라 물에 의해 발생하는 압력 분포가 있습니다.
수직 측면을 따라 힘은 사다리꼴의 면적과 동일한 크기를 가지며 이 힘은 사다리꼴의 중심을 통해 작용합니다.
수평면을 따라 분포되는 힘은 일정하며 그 크기는 직사각형의 면적과 같습니다. 이 힘은 사각형의 중심을 통해 작용합니다.
이 세 가지 힘을 더하면 결과 힘이 생성됩니다. 압력 중심의 위치는 모멘트의 원리를 적용하여 결정됩니다.

<ol>
	<li>히벨러, R.C. (2016). 엔지니어링 역학: 정적. 14판, 뉴저지: 피어슨. 섹션 9.5, 513쪽.</li>
</ol>

일정한 폭의 만곡판에 대한 유체압력

Fluid Pressure over Curved Plate of Constant Width

일정한 폭을 가진 휘어진 판이 액체 속에 잠겨 있을 때 판에 수직으로 작용하는 압력은 크기와 방향 모두에서 연속적으로 변합니다. 이런 경우에 한 점에서 합력의 크기와 위치를 계산하는 것은 종종 어렵습니다. 합력과 그 위치를 결정하는 방법 중 하나는 합력의 수평 성분과 수직 성분을 별도로 계산하는 것입니다. 이 복잡한 계산은 등가 하중에 의해 판에 작용하는 분산 하중을 2차원으로 나타내면 간단히 할 수 있습니다.
이 방법의 첫 번째 단계는 블록 내에 포함된 액체의 무게를 설명하는 것입니다. 물의 무게로 인한 힘의 크기는 비중, 판 두께 및 블록 면적의 곱으로 표시됩니다. 이 힘은 블록의 중심을 통해 작용합니다. 또한 블록의 수직 및 수평 면을 따라 물에 의해 발생하는 압력 분포가 있습니다. 수직 면을 따라 압력 분포는 사다리꼴인 반면 수평 면을 따라 분포는 직사각형입니다.
블록의 수직면을 따라 작용하는 힘은 사다리꼴의 면적과 같은 크기를 가지며 블록의 중심을 통해 작용합니다. 한편 블록의 수평면을 따라 작용하는 힘은 일정하며, 직사각형의 수평면의 중심이나 중간 지점을 통해 작용할 수 있는 힘의 크기는 직사각형의 면적과 같습니다.
블록에 작용하는 세 가지 힘을 모두 계산하면 곡선판에 작용하는 알짜 결과력을 얻을 수 있습니다. 또한 곡선판에 작용하는 액체의 압력 중심 위치는 모멘트의 원리를 적용하여 결정합니다. 이 방법은 복잡해 보일 수 있지만 다양한 공학적 응용 분야에서 플레이트에 작용하는 힘을 정확하게 계산할 필요가 있습니다.

일정한 너비의 곡선 판이 액체에 잠기면 판에 수직으로 작용하는 압력은 크기와 ...

fluid-pressure-over-curved-plate-of-constant-width

Education

교육

JoVE Core

Mechanical Engineering

기계공학

Unit 1

제1단원

Center of Gravity and Centroid

무게중심과 도심

KEY TERMS AND CONCEPTS

주요 용어 및 개념

finding force on a curved plate in water

Fluid pressure on a curved plate of constant width changes in both size and direction. That makes the total force hard to find directly. A common method is to split the force into horizontal and vertical parts and then combine them.

The calculation becomes simpler by replacing the distributed load with an equivalent two-dimensional loading. The first step is to include the weight of the liquid inside the block. That force equals the specific weight of the liquid times the plate thickness and the block area. It acts through the centroid of the block.

Next, the water pressure on the block sides is found. The pressure on the vertical side forms a trapezoidal distribution. Its force equals the area of the trapezoid and acts through the trapezoid centroid. The pressure on the horizontal side is rectangular and constant. Its force equals the area of the rectangle and can act through the rectangle centroid or midpoint of its horizontal side.

After these three forces are added, the net resultant force on the curved plate is known. The center of pressure, which is the point where the liquid force acts, is then found using the principle of moments. This method can seem complex, but it gives an accurate force calculation for many engineering applications.

Finding Force on a Curved Plate in Water

center of gravity

Center of Gravity in Balance and Design

The center of gravity is the point where an object’s weight appears to act. It is the spot used to balance the object most evenly. In mechanics, this point helps explain stability and moments of inertia. The center of gravity does not always sit inside the object’s shape. In some cases, it can lie outside the body. That is why the idea is useful for both simple and more complex shapes. Its location can be found with the principle of moments. The object is divided into very small parts, and...

center of mass

Center of Mass in Motion

The center of mass helps explain how an object moves through space. It is the point where the total mass of an object can be treated as concentrated. This idea applies to objects of different shapes and sizes. The center of mass is related to the center of gravity, but they are not the same. The center of gravity is the point where an object’s weight seems to be concentrated. It can be used to balance an object perfectly. Knowing the center of mass also helps predict motion. When a ball is...

centroid of a body

Finding the Center of a Body

The centroid is the geometric center of a body. It is an important idea in engineering, physics, and mechanics. For many objects, it lies inside the body. A body with holes or cavities can be an exception. For a homogeneous body, the centroid matches the center of mass or the center of gravity. Homogeneous means the material has a uniform density. In that case, the centroid can often be found by balancing the moments of the body’s volume. Symmetry can also help locate the centroid. If a...

centroid of a body: problem solving

Centroid of a Quarter Circle Wire

The centroid of a quarter circle wire shows how balance points can be found for curved shapes. In physics and engineering, the centroid helps describe stability, balance, and design. For a thin wire bent into a quarter circular arc, the goal is to find the centroid coordinates of the arc itself. Polar coordinates are used to solve this centroid problem. The wire is divided into small differential elements, and each element has a length equal to the radius times the differential angle. The x-...

centroid for the paraboloid of revolution

centroid-for-the-paraboloid-of-revolution

Centroid and Uses of a Paraboloid Shape

The centroid of a paraboloid of revolution is the point where its mass is balanced. A paraboloid of revolution is an axially symmetric surface made by rotating a parabola around its axis. In engineering, this location matters because it helps show how forces spread across the shape. Knowing the centroid can help when building parts that must handle stress and pressure reliably. The paraboloid shape has useful structural properties, including rotational symmetry and strength against stress...

composite bodies

Center of Gravity in Composite Bodies

Composite bodies are made of multiple connected parts that act as one larger object. Each part still has its own weight and center of gravity. To find the center of gravity of the whole body, engineers must account for every part. When the density or specific weight is constant, the center of gravity matches the centroid. The centroid is the geometric center of a shape. This idea is useful when analyzing parts that behave as a single unit. Composite bodies are common in mechanical engineering.

theorems of pappus and guldinus

Surface Area and Volume by Centroid Paths

Pappus and Guldinus theorems help find the surface area and volume of bodies of revolution. A body of revolution is formed when a plane curve or plane area is turned around an axis that does not intersect it. For surface area, a curve is revolved around a non-intersecting axis. A small line element on the curve creates a thin ring as it moves. Adding these ring areas gives the total surface area of the solid. The first theorem says that this surface area equals the length of the generating...

theorems of pappus and guldinus: problem solving

theorems-of-pappus-and-guldinus-problem-solving

Pappus and Guldinus Theorems for Surface Area

Pappus and Guldinus's theorems help find the surface area and volume of composite shapes. These rules are useful when a solid is made from simple parts that are hard to measure directly. A cylindrical storage tank with a conical top is one example. The tank can be split into two simple shapes: a cylinder and a cone. To find surface area, the first theorem is used for the solid formed by revolving each generating curve around a non-intersecting axis. The calculation uses the length of the...

resultant of a general distributed loading

resultant-of-a-general-distributed-loading

Finding the Resultant of Distributed Loads

Distributed loads create a force that is spread over a surface instead of acting at one point. To analyze this kind of loading, engineers use a single resultant force. That force represents the net effect of the entire load. This idea is important in structures that face non-uniform loads. Wind can push on buildings and towers with changing speed and direction, so the load is not evenly spread. Bridges also experience non-uniform loading from vehicles, and some parts of the bridge can feel...

fluid pressure

How Depth Changes Fluid Pressure

Fluid pressure changes with depth in liquids used in engineering systems. It matters in hydraulic systems, pumps, and valves, where the forces from moving and resting fluid must be considered to prevent damage or failure. For a fluid at rest, Pascal’s law says the pressure is equal in all directions. Pressure is force per unit area. Its size depends on the fluid’s specific weight, or mass density, and on how deep the measurement point is below the fluid surface. This relationship can be...

fluid pressure over flat plate of constant width

fluid-pressure-over-flat-plate-of-constant-width

Center of Pressure on a Submerged Plate

Fluid pressure on a submerged flat plate depends on depth and shape. A plate under water experiences pressure acting normal to its surface, and the force is spread across the whole area. For a rectangular plate of constant width, this pressure increases from the top edge to the bottom edge. Because the pressure rises with depth, the loading forms a trapezoidal distribution. The resultant force on the plate comes from the trapezoidal volume of water with a specific weight. The line of action of...

fluid pressure over curved plate of constant width

Fluid pressure on a curved plate of constant width changes in both size and direction. That makes the total force hard to find directly. A common method is to split the force into horizontal and vertical parts and then combine them. The calculation becomes simpler by replacing the distributed load with an equivalent two-dimensional loading. The first step is to include the weight of the liquid inside the block. That force equals the specific weight of the liquid times the plate thickness and...

fluid pressure over flat plate of variable width

fluid-pressure-over-flat-plate-of-variable-width

A submerged flat plate experiences fluid pressure that changes with depth. This pressure can create effects such as drag and buoyancy. To study a flat plate with variable width, the pressure distribution across the plate must be analyzed first. The force on a small strip of the plate is found by multiplying the pressure by the strip’s differential area. The pressure can also be written using the fluid’s specific weight and the depth of that strip below the surface. To find the total, or...

key terms and concepts

Learn how to find the resultant fluid force on a curved plate by splitting it into horizontal and vertical parts, then locating the center of pressure.

Finding Force on a Curved Plate in Water | JoVE K12

JoVE Core Mechanical Engineering offers concise, easy-to-understand animated videos covering key topics such as equilibrium, forces, truss analysis, and structural mechanics. Explore their real-world applications, and witness these concepts in action through scientist-led experiments.

mechanical engineering

Finding Force on a Curved Plate in Water

Description

Transcript