Name: scalar vs vector quantities in mechanics
Uploaded: 2023-09-22T11:49:38.000Z
Duration: 1 min 22 s
Channel: JoVE

물체의 움직임을 설명하는 데 사용되는 엔지니어링 역학의 다양한 물리량은 스칼라 또는 벡터를 사용하여 측정됩니다.
스칼라는 크기로 설명되고 양수 또는 음수의 물리 단위를 가진 숫자 값으로 표시되는 물리량입니다. 길이, 속도, 거리 및 시간이 몇 가지 예입니다.
벡터는 크기와 방향을 모두 가진 화살표로 설명되는 물리량입니다. 화살표의 길이는 크기를 나타내고 벡터와 고정 축 사이의 각도는 작용선의 방향을 나타냅니다.
그들은 굵은 글자로 표시되거나 글자 위에 화살표의 도움으로 표시되며, 크기는 글자를 이탤릭체로 표시하여 표시됩니다. 몇 가지 예로는 속도, 가속도 및 힘이 있습니다.
예를 들어, 움직이는 리프트를 생각해 보십시오. 리프트의 치수와 질량은 스칼라 양인 반면, 리프트의 속도와 무게는 크기와 방향을 모두 가지고 있기 때문에 벡터 양입니다.

<ol>
	<li>히벨러, R.C. (2016). Engineering Mechanics \u2012 정역학 및 동역학. 뉴저지 호보켄: 피어슨 프렌티스 홀. 17쪽</li>
</ol>

스칼라 및 벡터

역학에서 일반적으로 사용되는 힘, 속도, 속도, 일 등의 용어는 스칼라 또는 벡터 양으로 분류될 수 있습니다. 스칼라는 크기만으로 설명할 수 있는 물리량이며 방향 성분이 필요하지 않습니다. 스칼라 양의 예로는 질량, 면적, 길이가 있습니다.

같은 물리적 단위를 가진 스칼라 양은 수에 대한 일반적인 대수 규칙에 따라 가감될 수 있습니다. 예를 들어, 50분보다 10분 일찍 끝나는 수업은 50분 - 10분 = 40분 동안 지속됩니다. 마찬가지로 옥수수 60칼로리에 도넛 200칼로리를 더하면 60칼로리 + 200칼로리 = 260칼로리의 에너지를 얻을 수 있습니다. 우리가 스칼라 양에 숫자를 곱하면 우리는 같은 스칼라 양이지만 더 큰(또는 더 작은) 값을 얻습니다. 예를 들어, 어제의 아침 식사에 200칼로리의 에너지가 있었고 오늘의 아침 식사에 어제의 에너지가 4배였다면, 오늘의 아침 식사에는 4 × 200칼로리 = 800칼로리의 에너지가 있습니다. 두 스칼라 양은 서로 곱해지거나 나누어서 유도 스칼라 양을 만들 수도 있습니다. 예를 들어, 기차가 120km 거리를 1시간 안에 운행한다면, 그 속도는 120,000m/3600s = 33m/s이며, 여기서 속도는 거리를 시간으로 나눈 유도 스칼라 양입니다. 

반대로 벡터량은 크기와 방향성을 동시에 지닌 물리량입니다. 화살표를 이용하면 벡터를 그래프로 나타낼 수 있습니다. 화살표의 길이는 벡터의 크기를 나타내며, 화살표와 고정축 사이의 각도에 따라 벡터의 작용선이 결정됩니다. 화살표의 머리 부분은 벡터가 가리키는 방향을 나타냅니다. 벡터량의 예로는 변위, 속도, 위치, 힘, 토크 등이 있습니다.

텐트에서 6km 떨어진 곳에서 하이킹을 가는 친구에게 길을 알려주는 것을 고려해 보세요. 가장 쉬운 방법은 정확한 위치에 도달하는 방향을 확인하는 것입니다. 예를 들어, 남동쪽으로 6km 떨어진 곳이 더 도움이 될 것입니다. 이 양은 등산객의 변위입니다.

두 벡터의 크기가 같고 방향이 같으면 두 벡터는 같습니다. 방향이 같은 두 벡터는 평행한 벡터라고 합니다. 그러나 벡터가 첫 번째 벡터와 정확히 180° 반대 방향을 가리키면 역평행한 벡터라고 합니다. 방향이 서로 수직인 두 벡터는 직교 벡터라고 합니다.

역학에서 힘, 속도, 속도 및 일과 같이 일반적으로 사용되는 용어는 스칼라 또는 벡터 수량으로 분류할 수 있습니다. 스칼라는 물리적 ...

Education

교육

JoVE Core

Mechanical Engineering

기계공학

Unit 1

제1단원

Force Vectors

힘 벡터

KEY TERMS AND CONCEPTS

주요 용어 및 개념

Scalar and Vectors

scalar vs vector quantities in mechanics

Scalar and vector quantities are two main ways to describe physical quantities in mechanics. Common examples include force, speed, velocity, and work. Some of these are scalars, and others are vectors.

A scalar is a quantity that has magnitude only. It does not need direction. Mass, area, and length are examples of scalar quantities. Scalars with the same units can be added or subtracted like ordinary numbers. A class that ends 10 min earlier than 50 min lasts 50 min minus 10 min, which is 40 min.

Scalars can also be multiplied by a number. If yesterday’s breakfast had 200 calories of energy and today’s breakfast has four times as much, then today’s breakfast has 800 calories of energy. Two scalars can also be multiplied or divided to make another scalar quantity. For example, a train that covers 120 km in 1 h has a speed of 120,000 m/3600 s, or 33 m/s. That speed is a derived scalar quantity.

A vector has both magnitude and direction. Vectors are often shown with arrows. The arrow length shows the magnitude. The angle with a fixed axis shows the line of action, and the arrowhead shows the direction. Displacement, velocity, position, force, and torque are examples of vector quantities.

Direction matters in everyday situations. If a hiking rest point is 6 km from a tent, saying 6 km southeast is more useful than saying only 6 km. That gives the hiker displacement, which is a vector. Two vectors are equal if they have the same magnitude and the same direction. Vectors with the same direction are parallel. Vectors that point exactly 180° apart are antiparallel. Vectors that meet at right angles are orthogonal.

Scalar vs Vector Quantities in Mechanics

scalar and vectors

Scalar and vector quantities are two main ways to describe physical quantities in mechanics. Common examples include force, speed, velocity, and work. Some of these are scalars, and others are vectors. A scalar is a quantity that has magnitude only. It does not need direction. Mass, area, and length are examples of scalar quantities. Scalars with the same units can be added or subtracted like ordinary numbers. A class that ends 10 min earlier than 50 min lasts 50 min minus 10 min, which is 40...

vector operations

Adding and Multiplying Vectors

Vectors are quantities with both magnitude and direction, and their operations include addition, subtraction, and scalar multiplication. Scalar multiplication means a vector is multiplied by a scalar value, which creates a new vector with a different magnitude. If the scalar is positive, the direction stays the same. If the scalar is negative, the direction reverses. A common example is momentum, which comes from multiplying mass by velocity. In this case, mass is the scalar quantity and...

introduction to force

Force, Motion, and Mechanical Effects

Force changes the motion, shape, or orientation of an object. A flowing stream of water can push on a turbine vane and make it move in the direction of the flow. In mechanics, force is treated as a vector quantity, which means it has both magnitude and direction. It is measured in newtons, or N, in the SI unit system. Forces can act through direct contact or without contact. A push or pull is a contact force. Magnetic and gravitational forces are examples of non-contact interactions. For an...

force classification

Types of Forces in Physics

Forces in physics can be grouped by how they act and where they come from. These groups help describe motion, behavior, and equilibrium in the physical world. They are also useful in physics and engineering. One common way to classify forces is by whether they need contact. Contact forces act only when two objects touch. Frictional force, tension, and normal force are all contact forces that come from surface contact. Forces can also act without physical touch. These are called non-contact...

vector addition of forces

Resultant Force from Tugboats

Resultant force can be found with vector addition when two or more forces act on the same object. This idea helps explain how multiple pulls combine to create one net force. It is a key tool for understanding motion in physics. A clear example is a ship pulled by two small tugboats. The forces, F1 and F2, act at the same time but in different directions. The net force on the ship is the vector sum of those two forces. The parallelogram law gives a geometric way to add vectors. In this method,...

two-dimensional force system

Resolving Forces in a Plane

Resolving forces in a plane is a key part of two-dimensional mechanical analysis. A force vector can be split into x- and y-components, which show how the force acts in each direction. These components are written with the help of unit vectors, one for the x direction and one for the y direction. To find the components in a Cartesian coordinate system, first identify the angle theta between the force and the positive x-axis. If the line of action passes through the origin, basic trigonometry...

two-dimensional force system: problem solving

two-dimensional-force-system-problem-solving

Two-Dimensional Forces: Free-Body Analysis

Two-dimensional force analysis starts with a free-body diagram. A free-body diagram shows the object and every external force acting on it. It includes each force’s size, direction, and point of application. After the diagram is drawn, each force is broken into x- and y-components. This uses vector analysis and trigonometry, especially sine and cosine. The forces can then be written in Cartesian vector form, which makes them easier to work with. Next, the components in each direction are...

scalar notation

Vector Components for Force Calculations

Scalar notation helps simplify vector calculations by breaking a vector into separate x and y parts. When vectors are added or subtracted, each component can be handled on its own using scalar notation. This makes force problems easier to solve.

cartesian vector notation

Vector Components in 3D Space

Cartesian vector notation shows how to write vectors in three-dimensional space using x, y, and z components. It gives a clear way to represent direction and size for quantities used in mechanical engineering. The notation uses the unit vectors i, j, and k for the x, y, and z axes. A vector pointing in the direction (3, −4, 5) can be written as A = 3i - 4j + 5k. The unit vectors are i = (1, 0, 0), j = (0, 1, 0), and k = (0, 0, 1). This form is useful for describing displacement, velocity,...

direction cosines of a vector

Vector Orientation with Direction Cosines

Direction cosines describe how a vector is oriented relative to the x, y, and z axes. For a vector A written in Cartesian form with i, j, and k unit vectors, this idea helps connect the vector’s components to its direction in space. The magnitude of vector A is the square root of the sum of the squares of its components. Its direction is described by the coordinate direction angles α, β, and γ with the x, y, and z axes. These angles can be found by projecting vector A onto each axis. The...

three-dimensional force system

Force Components in 3D Space

A three-dimensional force system describes forces acting in x, y, and z directions. In mechanical engineering, this framework helps students and engineers study how objects and structures behave in three-dimensional space. One common example is a force acting on a particle in space. That force can be split into three parts: the x-component, the y-component, and the z-component. Vector mathematics is used to calculate each component, and together they make up the full three-dimensional force...

three-dimensional force system:problem solving

three-dimensional-force-systemproblem-solving

Resolving Forces in 3D Coordinates

Three-dimensional force systems involve forces acting in three different directions at the same time. These problems are common in physics and engineering. They are used to find the resultant force, which helps predict or analyze how an object or structure will behave. The first step is to resolve each force into scalar components. A scalar component is the amount of force along one axis. Trigonometric functions and vector addition are used to break the force into parts and then combine those...

position vectors

Using Position Vectors to Locate Points

Position vectors are used to locate points in space and show the direction and distance between two points. In math and science, they help describe spatial relationships and make calculations easier. A position vector can connect one point to another point or show a point’s location relative to the origin of coordinates. For a point P(x, y, z) relative to the origin O, the position vector r runs from O to P. In Cartesian vector form, it is written as r = x i + y j + z k. Here, i, j, and k are...

force vector along a line

Finding a Cable Force from Two Points

A cable force can be found from the two points that define its line of action. In three-dimensional statics, this setup often appears with a pole and a cable anchored to the ground. The cable ends are labeled A and B, and their position vectors are written as P_A and P_B. The position vector from A to B is found using the triangle law of vector addition. First, subtract P_A from P_B to get P_AB. Then find the magnitude of P_AB by taking the square root of the sum of the squares of its...

dot product

Using Dot Product to Find Work and Angle

The dot product connects vectors, work, and direction in mathematics and physics. In engineering, it is found by multiplying the magnitudes of two vectors and the cosine of the angle between them. It is shown with a dot symbol between the vectors. A real-world example is a vehicle pulling an object along the ground with a rope. If the rope is angled above the horizontal axis, the work done can be calculated with the dot product of the applied force and the object’s displacement. This makes the...

dot product: problem solving

Using the Dot Product to Solve Vector Questions

The dot product helps solve vector questions by combining vector size and the cosine of the angle between them. It is useful when the angle is measured anti-clockwise and when a problem asks for a vector relationship in component form. A good first step is to identify the question being asked. Then list the given vectors and write them in Cartesian form, also called component form. This makes the data easier to use in a calculation. Next, decide whether the dot product is the right operation.

cross product

Cross Product Direction and Magnitude

The cross product is a vector operation in vector algebra that creates a third vector from two input vectors. Unlike the scalar product, it does not give a single number. The result is a vector perpendicular to both original vectors. The size, or magnitude, of the cross product depends on the magnitudes of both vectors and the sine of the angle between them. A larger angle between the vectors gives a larger cross product magnitude. The direction is found with the right-hand rule. If the...

key terms and concepts

Learn how scalar and vector quantities differ in mechanics, with clear examples of magnitude, direction, displacement, speed, and force for high school science.

Scalar vs Vector Quantities in Mechanics | JoVE K12

JoVE Core Mechanical Engineering offers concise, easy-to-understand animated videos covering key topics such as equilibrium, forces, truss analysis, and structural mechanics. Explore their real-world applications, and witness these concepts in action through scientist-led experiments.

mechanical engineering

Scalar vs Vector Quantities in Mechanics

Description

Transcript