Name: scientific models, theories, and laws
Uploaded: 2023-05-16T08:18:40.000Z
Duration: 1 min 16 s
Channel: JoVE

K12 Standards

Virginia  Standards of Learning

HIgh School

Physical Science

PS.1

PS.1.d

Models, Theories, and Laws

모델은 직접 관찰하기 어려운 현상을 표현한 것입니다. 예를 들어, 원자 모델의 발전은 원자가 어떻게 결합되고 물질이 무엇으로 구성되어 있는지 설명할 수 있습니다.
이론은 관찰, 실험 및 기본 원리를 기반으로 자연 현상을 설명합니다.
예를 들어, 갈릴레오는 탑에서 가볍고 무거운 물체를 떨어뜨렸습니다. 이 실험에서 그는 낙하체의 가속도가 무게와 무관하다는 이론을 제안했습니다. 그러나 깃털과 야구공의 낙하 속도는 공기 저항을 제거하기 위해 진공 상태에서 떨어뜨리지 않는 한 동일하지 않습니다.
갈릴레오의 예측은 공기가 가하는 힘보다 훨씬 큰 무게를 가진 물체에만 적용되는 이상화된 모델에 해당합니다.
과학 법칙은 자연 현상의 행동을 설명하는 간결한 진술입니다. 법칙은 무슨 일이 일어나는지 예측하는 반면, 이론은 그 이유를 제시합니다.
예를 들어, 법칙은 공이 특정 각도로 발사되었을 때 얼마나 멀리 이동하는지 예측하는 반면, 이론은 중력을 사용하여 공의 포물선 궤적을 설명합니다.

<ol>
	<li>Young, H.D. 및 Freedman, RA (2012). 현대 물리학을 가진 대학 물리학. 샌프란시스코, 캘리포니아 : 피어슨; 섹션 1.1-1.2; 2–4페이지.</li>
	<li>지안콜리, DC (2014). 물리학: 응용 원리, 1권, 7판, 1900 E. Lake Ave., Glenview, IL: Pearson Education, Inc.; 섹션 1.3; 페이지 5.</li>
</ol>

모델, 이론 및 법칙

과학자들은 특정 현상 모음을 이해하는 데 도움을 주기 위해 모델을 자주 사용합니다. 물리학에서 모델은 너무 복잡해서 철저하게 연구할 수 없는 물리적 시스템의 압축 버전입니다. 그러한 예 중 하나는 광파 모델입니다. 물결과 달리 광파는 일반적으로 우리에게 보이지 않습니다. 그럼에도 불구하고 빛은 파동으로 구성되어 있다고 생각하는 것이 도움이 됩니다. 조사에 따르면 빛은 물결처럼 행동한다는 것이 밝혀졌기 때문입니다. 실제로 무슨 일이 일어나고 있는지 시각적으로 보는 것은 불가능하기 때문에 모델은 현상에 대한 대략적인 정신적 또는 시각적 표현 역할을 합니다. 모델은 일반적으로 구조적으로 조사되는 현상과 유사하며 상대적으로 간단합니다. 유용한 모델은 문제의 중요한 구성요소를 보존하는 동시에 실행 가능하도록 단순화합니다.

한편 이론은 더욱 포괄적이고 심층적이며 통계적으로 테스트할 수 있는 정확한 예측을 할 수 있습니다. 연구 중인 현상을 더 넓은 관점의 이론이라고 합니다.

물리학자들은 자연 발생을 연구하고 이를 연결하는 연관성을 찾습니다. 이러한 패턴이 잘 확립되어 자주 적용되는 경우 이를 물리적 법칙 또는 원리라고 합니다. 자연의 기능이 법칙으로 분류되는 방식에 관해 과학자들이 작성한 간결하면서도 일반적인 논평입니다. 법칙의 진술은 방정식이나 두 양 사이의 관계의 형태를 취하는 경우가 많습니다. 예를 들어, 전하 보존의 법칙은 고립된 시스템의 순 전하가 항상 보존되어 있음을 나타냅니다. 대부분의 경우 실험은 관찰 가능한 광범위한 사건에 걸쳐 법칙이라고 불리는 진술을 뒷받침합니다. 진술을 '법'이라고 합니다. 광범위한 상황에 걸쳐 적용 가능성이 확립되어 있고 적용 가능성의 제한 사항과 범위가 잘 이해되어 있는 경우.

모델이나 이론과 실제 시스템이나 사건을 구별하는 것이 중요합니다. 과학법칙은 설명적이며 자연이 어떻게 행동해야 하는지가 아니라 자연이 어떻게 행동하는지 설명하기 위한 것입니다. 이론과 마찬가지로 법칙도 모든 시나리오에서 테스트될 수는 없습니다.

과학자들은 특정 현상을 이해하는 데 도움이 되는 모델을 자주 사용합니다. 물리학에서 모델은 물리적 인 것의 응축 된 버전입니다 ...

/files/media/science-education/science-education-thumbs/14686.jpg

Education

교육

JoVE Core

Physics

물리학

Unit 1

제1단원

Units, Dimensions, and Measurements

단위, 차원 및 측정

KEY TERMS AND CONCEPTS

주요 용어 및 개념

scientific models, theories, and laws

Scientific models, theories, and laws help physicists describe natural phenomena. A model is a simplified version of a physical system that is too complex to study in full. It acts as a rough mental or visual picture of what may be happening. Good models keep the important parts and simplify the rest so the problem becomes workable.

The light wave model is one example. Light waves are usually invisible, so they cannot be seen in the same way as water waves. Even so, it is useful to think of light as waves because experiments show that light behaves like water waves. A model should resemble the phenomenon in a structural way, but it is not the same thing as the real system.

A theory goes further than a model. It is more complete, more detailed, and can make precise predictions that can be tested statistically. Physicists use theories to study natural events and the connections between them. The phenomenon being studied is viewed in a broader way when it is described as a theory.

When patterns are well established and used often, they are called physical laws or principles. A law is a short but general statement about how nature behaves. It often appears as an equation or a relationship between two quantities. For example, the law of conservation of charge says that the net electric charge of an isolated system remains conserved.

Experiments usually support laws across a wide range of observable situations. A statement is called a law when its range of use is known and its limits are understood. It is important to separate a model, theory, or law from the actual system or event it describes. Scientific laws are descriptive, so they explain how nature behaves, not how it should behave. Like theories, laws cannot be tested in every possible case.

Scientific Models, Theories, and Laws

the scope of physics

How Physics Shapes Science and Technology

Physics studies the interactions of energy, matter, space, and time. It looks for the basic mechanisms that explain natural phenomena. The word physics comes from the Greek word physis, which means nature. Physics helps us understand the natural world at its most fundamental level. It relies on quantitative laws, or rules written in numbers and measurements, to describe how things behave. That approach can also help other fields improve the limits of current technology. Physics matters in...

orders of magnitude

Estimating Scale with Powers of 10

Orders of magnitude help estimate the scale of a number using powers of 10. It is a simple way to round values to the nearest power of 10. This makes it easier to compare very large and very small numbers. To find the order of magnitude of a number, take its base-10 logarithm and round to the nearest integer. The result gives the power of 10 that most closely matches the original value. This method gives a consistent estimate of size without using exact digits. Orders of magnitude are useful...

/files/media/science-education/science-education-thumbs/12596.jpg

models, theories, and laws

Scientific models, theories, and laws help physicists describe natural phenomena. A model is a simplified version of a physical system that is too complex to study in full. It acts as a rough mental or visual picture of what may be happening. Good models keep the important parts and simplify the rest so the problem becomes workable. The light wave model is one example. Light waves are usually invisible, so they cannot be seen in the same way as water waves. Even so, it is useful to think of...

units and standards of measurement

SI Units for Physical Quantities

SI units give a standard way to measure physical quantities. A physical quantity can be defined by how it is measured or by how it is calculated from other measurements. For example, the mass and dimensions of a metallic cube can be found with a weighing machine and a meter scale. Some quantities are built from others. The volume of a cube is the cube of its side length. The density of the cube is then found by dividing mass by volume. Measurements are written in units, which are standardized...

estimation of the physical quantities

Fermi Estimation for Physical Quantities

Fermi estimation helps physicists, scientists, and engineers make rough calculations for physical quantities. These estimates are also called guesstimates, order-of-magnitude approximations, back-of-the-envelope calculations, or Fermi calculations. Enrico Fermi was known for making these kinds of estimates with surprising precision. Estimation is not random guessing. It uses prior experience and sound physical reasoning to get a rough value for a quantity. This kind of reasoning helps build...

/files/media/science-education/science-education-thumbs/14734.jpg

base quantities and derived quantities

SI Base Units Behind Measured Quantities

SI base units are the starting point for measuring physical quantities. In any system of units, some quantities must be defined through direct measurement. These are called base quantities, and their units are base units. Other physical quantities are built from these base values by algebraic combinations. These are called derived quantities, and their units are derived units. For example, area comes from two lengths multiplied together. It is a derived quantity and is written in SI base units...

conversion of units

Unit Conversion Steps and Real-World Errors

Unit conversion lets you change a measurement from one unit to another. It is useful in everyday life, such as when a cookbook gives amounts in liters or ounces and you need cups instead. It also helps when directions use feet or meters, but you want to know the distance in miles. The first step is to list the given unit and the unit you need. The second step is to choose a conversion factor, which is a ratio that shows how many of one unit equal another unit. For example, 1,000 meters equal 1...

accuracy and precision

Repeated Measurements in Science

Repeated measurements help scientists check the quality of their results. They are used to judge both precision and accuracy. These two ideas are related, but they do not mean the same thing. Measurements are precise when repeated trials give very similar results. Precision shows how closely the values agree with one another. Measurements are accurate when the result is very close to the true value or the accepted value. Accuracy shows how closely the values agree with the real target. High...

random and systematic errors

How Measurement Errors Affect Results

Measurement errors can change how accurate and precise a result appears. Scientists try to record measurements as carefully as possible, but errors can still happen. These errors are usually random or systematic. Random errors come from inconsistency or fluctuation in the measuring process. They can also come from changes in the quantity being measured. In repeated measurements, random error may make a value appear greater than the true value one time and less than it the next. A simple...

rules for significant figures

Measurement Precision and Significant Figures

Measurement precision depends on the tool used, and significant figures show that precision. A ruler can measure length to the closest millimeter. A caliper can measure length to the nearest 0.01 mm, so it gives a more precise measurement because it can detect very small changes in length. When a value is written from a measurement, the last digit is not exact. The person making the measurement must estimate that digit. For example, a stick that seems to fall between 13.2 cm and 13.3 cm must...

significant figures in calculations

Rounding Rules for Significant Figures

Rounding rules for significant figures help show the right level of certainty in measured results. When a calculation is reported with the correct number of significant figures, it better matches the uncertainty in the measurements. The rounding rule depends on the type of math being done. For addition and subtraction, the result should have the same number of decimal places as the number with the fewest decimal places. For multiplication and division, the result should have the same number of...

dimensional analysis

Dimensional Checks in Physics Equations

Dimensional consistency is a key check in physics equations. It means the dimensions on both sides of an equation must match. The idea helps show whether an equation can represent a real physical law. The first rule is simple: expressions on each side of the equal sign must have the same dimensions. That makes sense because you can only add or subtract quantities of the same type. The second rule says that the input to a standard mathematical function, such as a trigonometric function, a...

problem solving: dimensional analysis

Dimensional Checks for Physics Equations

Dimensional analysis helps check whether physics equations make sense. It compares the dimensions on each side of an equation and shows whether the units are consistent. This method is useful for spotting algebra errors, typos, and for remembering physical laws. A valid equation must follow two rules. First, both sides of an equality must have the same dimension, so only quantities with matching dimensions can be added or subtracted. Second, common math functions such as exponential,...

/files/media/science-education/science-education-thumbs/14687.jpg

solving problems in physics

Physics Problem Solving: Strategy to Check

Physics problem solving uses general physical principles to work out specific situations. It is a key skill in physics, and it can also help with everyday life. The same analytical skills can be used in new situations, while a list of facts can never cover every possible case. Solving physics problems also takes creativity and insight. These skills grow with experience and practice. There is no simple step-by-step method that works for every problem, but a three-stage process can guide the...

key terms and concepts

Learn how scientific models simplify complex systems, how theories make testable predictions, and how laws describe patterns in nature across many situations.

Scientific Models, Theories, and Laws | JoVE K12

physics

JoVE Core Physics introduces the theory and application of fundamental physics topics, including kinematics, dynamics, fluid mechanics, statics, waves, and acoustics, with concise and easy-to-understand animated videos. Additionally, the scientist-in-action videos demonstrate the application of related concepts in classical and original research experiments performed in today's laboratories worldwide.

PS.1.e

PS.1.f

PH.1

PH.1.d

PH.1.e

PH.1.f

Texas Essential Knowledge and Skills

High School

Specialised Topic in Science

112.51.c.1.

112.51.c.1.G.

112.51.c.1.H.

Alabama Course of Study Science

9-12

Earth and Space Science

Earth's Place in the Universe

9-12.ESS.1.3

112.51.c.3.

112.51.c.3.A.

Florida Department of Education

Nature of Science

SC.912.N.2

SC.912.N.2.2

SC.912.N.3

SC.912.N.3.2

SC.912.N.3.4

SC.912.N.3.5

Biology

BIO.1

BIO.1.A

BIO.1.G

BIO.1.H

BIO.3

BIO.3.A

PHYS.1

PHYS.1.A

PHYS.1.H

PHYS.2

PHYS.2.A

PHYS.3

PHYS.3.A

Chemistry and Physics

IPC.1

IPC.1.A

IPC.1.H

IPC.2

IPC.2.A

IPC.3

IPC.3.A

Scientific Method

The scientific method is used to solve problems and explain phenomena. The development of the scientific method coincided with changes in philosophy ...

What is a Hypothesis?

A hypothesis can be a simple sentence or statement about a property or any phenomenon observed or predicted for a population. It is usually a claim about ...

Null and Alternative Hypotheses

The actual hypothesis testing begins by considering two hypotheses. They are termed&#160; the null hypothesis and the alternative hypothesis. These ...

Types of Hypothesis Testing

There are three types of hypothesis tests: right-tailed, left-tailed, and two-tailed.
When the null and alternative hypotheses are stated, it is observed ...

Introduction to Test of Independence

In statistics, the term independence means that one can directly obtain the probability of any event involving both variables by multiplying their ...

Hypothesis Test for Test of Independence

The test of independence is a chi-square-based test used to determine whether two variables or factors are independent or dependent. This hypothesis test ...

Decision Making: P-value Method

The process of hypothesis testing based on the P-value method includes calculating the P- value using the sample data and interpreting it.
First, a ...

Decision Making: Traditional Method

The process of hypothesis testing based on the traditional method includes calculating the critical value, testing the value of the test statistic using ...

empirical-method-to-interpret-standard-deviation

Empirical Method to Interpret Standard Deviation

The empirical rule, also known as the three-sigma rule, allows a statistician to interpret the standard deviation in a normally distributed dataset. The ...

Data Collection by Experiments

Data collection is a systematic method of obtaining, observing, measuring, and analyzing accurate information. An experimental study is a standard method ...

Solving Problems in Physics

Problem-solving is the ability to apply general physical principles to specific situations, usually expressed by equations. It is an essential skill in ...

The student will demonstrate an understanding of scientific and engineering practices by asking questions and defining problems
• ask questions that require empirical evidence to answer
• develop hypotheses indicating relationships between independent and dependent variables
• offer simple solutions to design problems

PS.1.a

What is an Experiment?

An experiment is a planned activity carried out under controlled conditions. The purpose of an experiment is to investigate the relationship between two ...

Study Design in Statistics

A study design is a set of techniques that allow a researcher to collect and analyze data from different variables defined for a specific research ...

Observational Studies

Observational studies are a type of analytical study where researchers observe events without any interventions. In other words, the researcher does not ...

Experimental Designs

An experimental design is a systematic process that allows researchers to evaluate the relationship between dependent and independent variables. There are ...

Randomized Experiments

The randomization process involves assigning study participants randomly to experimental or control groups based on their probability of being equally ...

Crossover Experiments

Crossover experiments, also called the repeated-measurements design, is a study design in which all experimental units are exposed to all treatments in ...

Controls in Experiments

When conducting an experiment, it is crucial to have control to reduce bias and accurately measure the dependent variables. It also marks the results more ...

Bias

Bias refers to any tendency that prevents a question from being considered unprejudiced. In research, bias occurs when one outcome or answer is selected ...

Blinding

Blinding is a commonly used method of not telling participants which treatment a subject is receiving. Blinding is a critical part of a randomized control ...

Clinical Trials

Clinical trials are prospective experimental studies conducted on humans to determine the safety and efficacy of treatments, drugs, diet methods, and ...

Data Collection by Observations

Data collection refers to a systematic way of obtaining, observing, measuring, and analyzing accurate information. Observational studies are one of the ...

Data Collection by Survey

The systematic method of obtaining and analyzing accurate information of a population is called data collection. A survey is a standard method of data ...

Units and Standards of Measurement

A physical quantity is defined either by specifying its measurement method or by stating how it is calculated from other measurements. For example, ...

Estimation of the Physical Quantities

On many occasions, physicists, other scientists, and engineers need to make estimates of a particular quantity. These are sometimes referred to as ...

Base Quantities and Derived Quantities

In any system of units, the units for some physical quantities must be specified through a measurement process. These measurements are the base quantities ...

Conversion of Units

Sometimes, there is a need to convert from one unit to another one. For instance, reading a cookbook in which quantities are expressed in units of liters ...

The student will demonstrate an understanding of scientific and engineering practices by planning and carrying out investigations
• independently and collaboratively plan and conduct observational and experimental investigations; identify variables, constants, and controls where appropriate and include the safe use of chemicals and equipment
• evaluate the accuracy of various methods for collecting data
• take metric measurements using appropriate tools and technologies
• apply scientific ideas or principles to design, construct, and/or test a design of an object, tool, process or system

PS.1.b

Review and Preview

Data are individual items of information obtained from a population or sample. Data may be classified as qualitative (categorical), quantitative ...

What is a Frequency Distribution

A frequency is the number of times a value of the data occurs. The sum of all the frequency values represents the total number of students included in the ...

Ogive Graph

An ogive graph is sometimes called a cumulative frequency polygon. It is one type of frequency polygon that shows cumulative frequency. In other words, ...

Histogram

The histogram is a graphical representation in the x-y form of data distribution in a data set. The horizontal x-axis is labeled with what the data ...

Relative Frequency Histogram

The relative frequency depicts the proportion of data points that have each value. The frequency tells the number of data points that have each value. ...

Scatter Plot

The most common and easiest way to display the relationship between two variables, x and y, is a scatter plot. A scatter plot shows the direction of a ...

Time-Series Graph

A time-series graph is a line graph with repeated measurements taken at successive intervals of time. It is also called a time series chart. To construct ...

Bar Graph

A bar graph is also called a bar chart and consists of bars that are separated from each other. It either uses horizontal or vertical bars to show ...

Multiple Bar Graph

As the name suggests, a multiple bar graph is the same as a bar graph but has multiple bars to depict relationships between different data values. One can ...

The student will demonstrate an understanding of scientific and engineering practices by pnterpreting, analyzing, and evaluating data
• construct and interpret data tables showing independent and dependent variables, repeated trials, and means
• construct, analyze, and interpret graphical displays of data and consider limitations of data analysis
• apply mathematical concepts and processes to scientific questions
• use data to evaluate and refine design solutions to best meet criteria

PS.1.c

Scientific Models, Theories, and Laws

Description

Transcript

More videos by Standards