Name: external work, energy, and thermal loss
Uploaded: 2023-05-16T08:18:41.000Z
Duration: 1 min 11 s
Channel: JoVE

K12 Standards

Tennessee Academic Standards

High School

Physics

Energy

PHYS.PS3.8

Work Done on a System by External Force

창고에서 상자를 옮기는 사람을 생각해 보십시오.
마찰력이 없으면 상자에 가해진 힘에 의해 수행되는 작업은 상자의 운동 에너지의 변화입니다.
실생활에서는 마찰력이 상자에 작용합니다. 따라서 적용된 힘과 마찰력 크기의 차이에 따라 상자의 가속도가 결정됩니다.
힘이 일정하기 때문에 상자는 일정한 가속도를 갖습니다. 그런 다음 최종 속도는 상자의 초기 속도, 가속도 및 변위로 작성할 수 있습니다.
가속도는 주어가 되고, 그 표현은 힘 방정식으로 대체되고 더욱 단순화됩니다.
위치 에너지에는 변화가 없기 때문에 운동 에너지의 차이는 상자의 기계적 에너지의 변화로 쓸 수 있습니다.
두 번째 항은 상자와 바닥 사이의 마찰로 인한 열 에너지의 증가를 나타냅니다.
요약하면, 외부 힘에 의해 수행되는 작업은 시스템으로 또는 시스템에서 전달되는 에너지와 같습니다.

<ol>
	<li>Halliday, Resnick and Walker (2014), Fundamentals of Physics, 10th Edition, Wiley and Sons Inc.: section 8.4; pages 192–194.</li>
</ol>

외부 힘에 의해 시스템에 수행된 작업

입자에 외부 힘이 한 일은 입자의 운동 에너지를 변화시킵니다. 그러나 상호작용하는 입자 시스템에서는 내부 힘도 고려해야 합니다. 위치 에너지 공식은 내부 힘의 효과를 공식화하는 데 도움이 됩니다. 외부 힘에 의해 수행된 알짜 일은 운동 에너지와 위치 에너지를 모두 포함하는 기계적 에너지의 전체 변화로 표현될 수 있습니다.

마찰과 같은 비보존적 반대 힘이 있는 경우 외부 힘에 의해 수행된 일의 일부가 열에너지로 손실됩니다. 힘이 작용하는 물체의 층과 반대쪽 지면의 층이 충돌함에 따라 충돌하는 층을 따라 있는 분자가 전자기력을 통해 상호 작용하고 층이 가열됩니다. 결국 외력에 의해 수행된 일의 일부는 계속해서 층을 가열하고 되돌릴 수 없는 열 에너지로 손실됩니다. 손실된 열에너지를 운동에너지와 위치에너지의 변화에 더하면 전체 일은 얻어집니다.

입자에 대한 외력에 의해 수행되는 작업은 입자의 운동 에너지를 변화시킵니다. 그러나 상호 작용 시스템에 대한 내부 힘도 고려해야합니다 ...

/files/media/science-education/science-education-thumbs/14751.jpg

Education

교육

JoVE Core

물리학

Unit 1

제1단원

Potential Energy and Energy Conservation

퍼텐셜 에너지와 에너지 보존

KEY TERMS AND CONCEPTS

주요 용어 및 개념

external work, energy, and thermal loss

External work on a system can change its energy in more than one way. For a single particle, work done by an external force changes kinetic energy. For a system of interacting particles, internal forces also matter, and potential energy helps describe their effect.

The net work done by an external force can be written as the total change in mechanical energy. Mechanical energy includes both kinetic energy and potential energy. When the system gains or loses this energy, the work expression accounts for that full change.

A non-conservative opposing force, such as friction, changes the result. Some of the work done by the external force is not stored as mechanical energy. Instead, it is lost as thermal energy.

This heating happens when layers of the object and layers of the ground collide and rub together. The molecules in the colliding layers interact through electromagnetic forces, and the layers warm up. That part of the work becomes irreversible thermal energy.

To find the total work, add the lost thermal energy to the change in kinetic and potential energies. This gives the full energy balance for the system.

External Work, Energy, and Thermal Loss

gravitational potential energy

Gravitational Energy from Height and Weight

Gravitational potential energy depends on an object’s weight and its height above the ground. It is one part of the total potential energy of a system, which comes from the interactions between objects. In a system, the total potential energy is the sum of the potential energies for all the objects. Potential energy is usually grouped into two main categories: gravitational potential energy and elastic potential energy. Gravitational potential energy describes the energy tied to a body’s...

elastic potential energy

Spring Force and Stored Energy

Elastic potential energy is stored when an elastic object is deformed, such as when a spring is stretched. An object is elastic if it returns to its original shape and size after the force is removed. This stored energy is part of a system’s potential energy. An ideal spring also exerts an elastic force. The work done by this force can be described as a change in the spring’s elastic potential energy. For a perfectly elastic spring in one dimension, that work depends only on the spring...

conservation of mechanical energy

Mechanical Energy in Isolated Systems

Mechanical energy in an isolated system is the total of kinetic energy and potential energy. Kinetic energy is the energy of motion, and potential energy is stored energy. The transcript focuses on what happens when energy shifts within a system without outside influence. In this case, only conservative forces act on the objects in the system. Conservative forces can transfer energy between kinetic energy and potential energy. Friction and drag do not act here, and no external force from...

/files/media/science-education/science-education-thumbs/14702.jpg

work done on a system by external force

External work on a system can change its energy in more than one way. For a single particle, work done by an external force changes kinetic energy. For a system of interacting particles, internal forces also matter, and potential energy helps describe their effect. The net work done by an external force can be written as the total change in mechanical energy. Mechanical energy includes both kinetic energy and potential energy. When the system gains or loses this energy, the work expression...

conservative forces

Conservative Forces and Path Independence

Conservative forces are forces for which the work done depends only on the starting and ending points. In this case, the work is path independent. That means the total energy of the system, including kinetic energy and potential energy, stays conserved during the change. This idea follows the law of conservation of energy. When energy shifts between kinetic and potential forms, the total amount remains the same. Because the work is completely reversible, an object can start and stop at any two...

non-conservative forces

Friction and Energy Loss in Motion

Non-conservative forces, such as friction and air resistance, remove energy from a system as it moves. The energy is not stored as potential energy. Instead, it is lost from the system and cannot be used later for useful work. These forces are path-dependent, which means the route matters. Where an object starts and stops can change the work done. A grinding wheel is one example, because the work depends on how many rotations the wheel makes. Non-conservative forces also turn large-scale...

conservation of energy

Energy Changes in a Closed System

Energy changes in a closed system follow a conservation law in physics. A conserved quantity is not the same as the everyday use of the word "conserved." In science, a conserved quantity stays constant, or it changes by a definite amount that is transferred to another system and converted into another form of the same quantity. This means a conserved quantity can change form, but it cannot be created or destroyed in a strict physical sense. For that reason, physics does not have a law of...

conservation of energy: application

Energy Conservation Problem-Solving Steps

Energy conservation problem-solving uses a clear set of steps. First, identify the system you want to study. In many cases, that system includes more than one body at the same time. Next, identify the forces acting on the object and decide whether each force is conservative. A conservative force is one whose work can be described with potential energy. If a non-conservative force such as friction does work, then mechanical energy is not conserved, and the system must be analyzed with...

force and potential energy in one dimension

force-and-potential-energy-in-one-dimension

Finding Force from Potential Energy

Force can be found from potential energy when the energy is written as a function of position. For a conservative force, the force component in a given direction equals the negative derivative of the matching potential energy with respect to displacement. This means force and the slope of potential energy have opposite signs. Where potential energy changes quickly with displacement, the force and the work done are largest. When a force acts along the positive coordinate axis, potential energy...

force and potential energy in three dimensions

force-and-potential-energy-in-three-dimensions

Gradient Force from 3D Potential Energy

Gradient force from 3D potential energy shows how a conservative force changes along the x, y, and z axes. The potential energy function U depends on all three spatial coordinates. Each force component is linked to how U changes with position along one coordinate. In one dimension, force can be written as the negative ratio of the change in potential energy to the displacement along that axis. For very small displacements, these ratios become derivatives. When a function has several variables,...

energy diagrams - i

Potential Energy Diagrams and Stability

Potential energy diagrams help describe how a mechanical system moves. Because energy is a scalar quantity, the system’s behavior is easier to interpret from the diagram. A skater on a parabolic ramp is a clear example. The ramp height changes with horizontal position, so the potential energy changes as well. As the skater moves down from the highest point, potential energy changes into kinetic energy. Kinetic energy is the energy of motion. The net force on the skater is gravitational force,...

energy diagrams - ii

Stability in Potential Energy Diagrams

Potential energy diagrams show how stable a system is at different positions. Their shape, or topology, helps identify equilibrium points. An equilibrium point is a place where the system can stay in balance because the net force is zero. At a local minimum, the potential energy is lowest. The system tends to remain there unless a net force acts on it. The slope at the minimum is zero. The slope is positive on both sides, so the force acts as a restoring force and pushes the system back. A...

key terms and concepts

Learn how external force changes kinetic and potential energy, and why friction can turn part of that work into thermal energy in a system.

External Work, Energy, and Thermal Loss | JoVE K12

physics

JoVE Core Physics introduces the theory and application of fundamental physics topics, including kinematics, dynamics, fluid mechanics, statics, waves, and acoustics, with concise and easy-to-understand animated videos. Additionally, the scientist-in-action videos demonstrate the application of related concepts in classical and original research experiments performed in today's laboratories worldwide.

Virginia  Standards of Learning

HIgh School

PH.4

PH.4.b

Minnesota Academic Standards in Science

9-12

2.2.1 9P.2.2.1.1

Arizona Science Standards

Physical Science

HS.P4

HS.P4U1.8

Alabama Course of Study Science

9-12.P.2.3.c

new-york-state-science-learning-standards

New York State Science Learning Standards

HS. Energy

HS-PS3-3.

The universe is composed of matter in different forms, and all forms of matter contain energy.&#160; The different forms of energy on Earth originate from ...

Types of Potential Energy

Potential energy is also known as energy at rest or stored energy. Common types of potential energy include the gravitational potential energy stored in ...

Types of Kinetic Energy

The amount of kinetic energy of an object depends on its mass and speed. Consider two balls of different masses rolling down an inclined plane at the same ...

Kinetic Energy - I

It&#8217;s plausible to suppose that the greater the velocity of a body, the greater effect it could have on other bodies. This does not depend on the ...

Kinetic Energy - II

The kinetic energy of a particle is one-half of the product of the particle&#8217;s mass and the square of its speed. Note that just as Newton&#8217;s ...

Gravitational Potential Energy

Potential energy is not just a property of each object, but also a property of the interactions between objects in a chosen system. For each type of ...

Elastic Potential Energy

Elastic potential energy is the energy stored as a result of the deformation of an elastic object, such as the stretching of a spring. An object is ...

Conservation of Mechanical Energy

The mechanical energy E of a system is the sum of its potential energy U and the kinetic energy K of the objects within it. What happens to this ...

Conservation of Energy

The terms &#39;conserved quantity&#39;&#160;and &#39;conservation law&#39;&#160;have specific scientific meanings in physics, which differ from the ...

Conservation of Energy: Application

When solving problems using the energy conservation law, the object (system) to be studied should first be identified. Often, in applications of energy ...

Mechanisms of Heat Transfer I

Just as interesting as the effects of heat transfer on a system are the methods by which the heat transfer occur. Whenever there is a temperature ...

Mechanisms of Heat Transfer II

In convection, thermal energy is carried by the large-scale flow of matter. Ocean currents and large-scale atmospheric circulation, which result from the ...

conduction-convection-and-radiation-problem-solving

Conduction, Convection and Radiation: Problem Solving

There are three methods by which heat transfer can take place: conduction, convection, and radiation. Each method has unique and interesting ...

Identify and calculate different types of energy and their transformations (thermal, kinetic, potential, including magnetic and electrical potential energies) from one form to another in a system. Identify and calculate different types of energy and their transformations (thermal, kinetic, potential, including magnetic and electrical potential energies) from one form to another in a system. EXPLANATION:  In 6.PS3 students were introduced to the various types of energy and mechanisms for their transformations. Students should now be able to quantify the total energy of a system as well as quantify each different type of energy in a system. Energy is an abstract concept that does not have a physical form. It is a substance-like quantity that is recognized to be conserved as a system changes. Calculations present an opportunity to observe that potential energies are due to the positions of objects within a field, while kinetic energy is based on an object’s mass and motion. Students can evaluate the total energy of a system by imagining that there are different types of energy storage accounts, just as money can be stored in different accounts. Energy can transferred into or out of any of these accounts. Three different processes can account for all energy changes: working, heating, and radiating. In energy storage due to field effects, such as gravitational or electrostatic fields, the field itself stores the potential energy and not the object in the field.

PHYS.PS3.1

What is Energy?

The universe is composed of matter in different forms, and all forms of matter contain energy. &#xA0;The different forms of energy on Earth originate from ...

Heat Flow and Specific Heat

Heat is a type of energy transfer that is caused by a temperature difference, and it can change the temperature of an object. Since heat is a form of ...

Investigate conduction, convection, and radiation as a mechanism for the transfer of thermal energy.Investigate conduction, convection, and radiation as a mechanism for the transfer of thermal energy. EXPLANATION: Thermal energy is the energy of a system due to the motion of the particles in that system. One object can transfer its thermal energy to another object through the processes of heating or radiating. Convection and conduction are processes which require a physical medium to transfer the thermal energy. In the case of conduction, two objects are in direct contact, while convection transfers thermal energy through a liquid or gaseous medium. Radiation is a unique form of energy transfer which can transfer without a medium. One packet of this energy is called a photon. The energy of the photon determines the effect that it will have when it interacts with matter. Low energy photons such a microwaves add to the motion of matter and result in an increase of the thermal energy. Photons carry energy from the sun to Earth.

PHYS.PS3.2

Quantifying Heat

Thermal Energy&#160;

Microscopically, thermal energy is the kinetic energy associated with the random motion of atoms and molecules. Temperature is a ...

Free-falling Bodies: Introduction

All objects, neglecting air resistance, fall with the same acceleration towards the Earth&#39;s center due to the force exerted by the Earth&#39;s ...

Free-falling Bodies: Example

An object falling without any air resistance under the influence of gravitational force is said to be in free-fall. For free-falling bodies, the ...

Force and Potential Energy in One Dimension

Force can be calculated from the expression for potential energy, which is a function of position. The component of a conservative force, in a particular ...

Force and Potential Energy in Three Dimensions

Consider a particle moving under the action of a conservative force that has components along each coordinate axis. Each component of force is a function ...

Energy Diagrams - I

The dynamics of a mechanical system can be easily understood by interpreting a potential energy diagram. Since energy is a scalar quantity, the ...

Energy Diagrams - II

Energy diagrams are important to understand the dynamics of a system. The topology of an energy diagram helps illustrate the equilibrium points of the ...

Use the principle of energy conservation and mathematical representations to quantify the change in energy of one component of a system when the energy that flows in and out of the system and the change in energy of the other components is known.         Use the principle of energy conservation and mathematical representations to quantify the change in energy of one component of a system when the energy that flows in and out of the system and the change in energy of the other components is known.         EXPLANATION:  In PHYS.PS3.1 students quantify the various types of energy and consider methods for energy transfer. If a student is able to evaluate the total energy of a system, such evaluations before and after a change to a system provide a mechanism to show that energy of a system has been conserved. For example, students might use pie charts to show the distribution of the total energy. For an object about to freefall, the pie chart might be 100% gravitational potential energy. Mid-descent, the energy might be half gravitational potential energy and half kinetic energy. After colliding with the ground, the total energy may have decreased, which can be represented as heat energy lost from the pie chart.

PHYS.PS3.3

Linear Momentum

The term momentum is used in various ways in everyday language, most of which are consistent with the precise scientific definition. Generally, momentum ...

Force and Momentum

Force and momentum are intimately related. Force acting over time can change momentum, and Newton&#39;s second law of motion can be stated in its most ...

Impulse

According to Newton&#8217;s second law of motion, the rate of change of the momentum of an object is the net external force acting on it. The total change ...

Impulse-Momentum Theorem

The total change in the motion of an object is proportional to the total force vector acting on it and the time over which it acts. This product is called ...

Conservation of Momentum: Introduction

The total momentum of a system consisting of N interacting objects is constant in time or is conserved. A system must meet two requirements for its ...

Conservation of Momentum: Problem Solving

Solving problems using the conservation of momentum requires four basic steps:

	Identify a closed system, where the total mass is constant, and no net ...

Types Of Collisions - I

When two objects come in direct contact with each other, it is called a collision. During a collision, two or more objects exert forces on each other in a ...

Types of Collisions - II

When two or more objects collide with each other, they can stick together to form one single composite object (after collision). The total mass of the ...

Elastic Collisions: Introduction

An elastic collision is one that conserves both internal kinetic energy and momentum. Internal kinetic energy is the sum of the kinetic energies of the ...

Elastic Collisions: Case Study

Elastic collision of a system demands conservation of both momentum and kinetic energy. To solve problems involving one-dimensional elastic collisions ...

collisions-in-multiple-dimensions-introduction

Collisions in Multiple Dimensions: Introduction

It is far more common for collisions to occur in two dimensions; that is, the initial velocity vectors are neither parallel nor antiparallel to each ...

collisions-in-multiple-dimensions-problem-solving

Collisions in Multiple Dimensions: Problem Solving

In multiple dimensions, the conservation of momentum applies in each direction independently. Hence, to solve collisions in multiple dimensions, we should ...

Assess the validity of the law of conservation of linear momentum (p=mV) by planning and constructing a controlled scientific investigation involving two objects moving in one dimension. Assess the validity of the law of conservation of linear momentum (p=mV) by planning and constructing a controlled scientific investigation involving two objects moving in one dimension. EXPLANATION: Momentum is a useful tool when considering conservation of energy when two objects interact. Attempts to quantify all energy transformation in such a system often fail to account for energies lost due to the production of sound and heat. Collisions where energy is dissipated from the system are known as inelastic collisions. Though system energy may be lost to the surroundings, the conservation of momentum will still be observed. Thus the conservation of momentum can provide a tool to evaluate inelastic collisions.

PHYS.PS3.4

Temperature and Thermal Equilibrium

Heat and temperature are essential concepts for everyone every day. The study of heat and temperature is part of an area of physics known as ...

Heat Capacity: Problem-Solving

The heat capacity of a gas is the amount of heat energy required to raise the temperature of a unit mass of gas by one degree Celsius. It is an important ...

Construct an argument based on qualitative and quantitative evidence that relates the change in temperature of a substance to its mass and heat energy added or removed from a system. Construct an argument based on qualitative and quantitative evidence that relates the change in temperature of a substance to its mass and heat energy added or removed from a system.  EXPLANATION: Two different materials will undergo different degrees of temperature change even with the same amount of energy added to each. Heat capacity is a ratio (the slope of a temperature vs. heat added) that describes the change in temperature of a sample dependent on the amount of heating. Empirical determination of the heat capacity of a substance requires that both phase and mass of the substance are constants. Students can utilize proportional reasoning in the design of a second portion of this experiment to determine the effect of mass on temperature change.

PHYS.PS3.5

Work-energy Theorem

According to Newton&#x2019;s second law of motion, the sum of all the forces acting on a particle (net force) determines the rate of change in the ...

Work and Energy for Variable Forces

When an object is acted upon by a variable force, the amount of work done and the change in energy of the object can be more complex to calculate compared ...

/files/media/science-education/science-education-thumbs/14699.jpg

work-energy-theorem-for-motion-along-a-curve

Work-Energy Theorem for Motion Along a Curve

The work-energy theorem can be generalized to the motion of a particle along any curved path. The simple argument here is that the curved path can be ...

/files/media/science-education/science-education-thumbs/14700.jpg

Work Done Over an Inclined Plane

The center-of-mass framework helps to easily describe the work done on rigid bodies. Since the internal forces in a rigid body do no work, they can be ...

/files/media/science-education/science-education-thumbs/14701.jpg

Work Done by Many Forces

The total work done on an object acted upon by multiple forces can be computed using two methods that give the same result. In one method, the work done ...

/files/media/science-education/science-education-thumbs/14735.jpg

Work Done by Gravity

Gravitation is one of the four fundamental forces in nature. The force between objects on Earth and Earth itself is called gravity.
Like other forces, ...

/files/media/science-education/science-education-thumbs/14750.jpg

Power

The concept of work involves force and displacement; meanwhile, the work-energy theorem relates the net work done on a body to the difference in its ...

Power Expended by a Constant Force

The relationship between work done and the time taken to do it can be explained using the concept of power. For example, several sprinters in a race may ...

Define power and solve problems involving the rate of energy production or consumption (P=∆E/∆t). Explain and predict changes in power consumption based on changes in energy demand or elapsed time. Investigate power consumption and power production systems in common use.  Define power and solve problems involving the rate of energy production or consumption (P=∆E/∆t). Explain and predict changes in power consumption based on changes in energy demand or elapsed time. Investigate power consumption and power production systems in common use. EXPLANATION:  This standard pairs well with PHYS.PS3.6. Students should understand that a given task will require a certain minimum amount of energy. In accordance with the work-energy theorem, this would be described as work done on the system. Power incorporates a rate element into this discussion. An object can be lifted to an identical height by two different mechanisms. The total energy input into the system (the object and Earth’s gravitational field) will be the same in either case. However, if one mechanism for lifting the object does this in a smaller amount of time, it is said to be more powerful. Students may compare two different devices that accomplish the same task, but have different power ratings and explain the impact of the different power ratings on how the devices are used. For example, two microwaves might both pop a bag of popcorn, but a more powerful microwave might do it faster or be more likely to burn the popcorn at recommended time settings.

PHYS.PS3.6

Quantifying Work

As a system undergoes a change, its internal energy can change, and energy can be transferred from the system to the surroundings, or from the ...

Heat and Free Expansion

The work done by a thermodynamic system depends not only on the initial and final states but also on the intermediate states&#8212;that is, on the path. ...

Internal Energy

The internal energy of a thermodynamic system is the sum of the kinetic and potential energies of all the molecules or entities in the system. The kinetic ...

Investigate and evaluate the laws of thermodynamics and use them to describe internal energy, heat, and work. Investigate and evaluate the laws of thermodynamics and use them to describe internal energy, heat, and work. EXPLANATION: Internal energy of a system can be changed by either work or heat. For example: If a system is defined as Earth’s gravitational field, then lifting a lump of clay upwards increases the energy/instability of this system as the field stores gravitational potential energy. It can be said that the person who lifted the clay higher and higher did work on the system. If the person is removed, the clay will fall. As the clay falls and strikes the ground, the internal energy of the gravitational field decreases by heating the surroundings (the clay and surface it falls onto). Systems move towards conditions of stability where their energy is at a minimum. According to the law of conservation of energy, the decrease in the energy of the system must mean that energy is transferred to the surroundings. Some of this energy can be utilized in designed systems to do productive work (e.g., lift something, turn something). In all cases, a portion of this energy will heat the surroundings by releasing photons of varying wavelengths. When a system loses energy and moves towards stability, the entropy of the universe increases. It may be helpful to consider entropy as a

PHYS.PS3.7

External Work, Energy, and Thermal Loss

Description

Transcript

More videos by Standards