Name: beam deflection from central load
Uploaded: 2024-05-23T13:00:13.000Z
Duration: 1 min 14 s
Channel: JoVE

중심에서 점 하중 F를 전달하는 길이 L의 단순하게 지지되는 빔 PQ를 고려하십시오. 빔 중심의 처짐은 무엇입니까?
여기서 빔의 양쪽 끝에서의 반응은 동일하며 각각은 중심 하중의 절반입니다.
세그먼트 PC를 고려하고 끝 P에서 x까지의 거리에 있는 점을 선택합니다. 이 시점에서 점 P에서의 반작용으로 인한 모멘트는 점 P에서의 하중에 거리를 곱한 값입니다. 끝 P의 하중에 대한 모멘트 방정식의 부분 미분은 x의 절반입니다. 
빔의 세그먼트 QC에 대해 유사한 분석을 수행할 수 있습니다.
Castigliano의 정리를 사용하면 점 C의 처짐은 적용된 하중으로 인한 변형 에너지의 편도함수에 의해 결정됩니다.
이 방정식은 빔 PC와 QC의 두 세그먼트를 고려하여 단순화할 수 있습니다.
빔 길이의 절반에 걸쳐 적분을 수행하면 빔 중심의 편향에 대한 표현이 제공됩니다.

카스티글리아노의 정리: 문제 해결

중심점 하중을 전달하는 단순 지지 빔의 처짐은 구조 역학 원리, 특히 카스티글리아노의 정리를 적용하여 분석할 수 있습니다. 이 정리는 하중 적용 지점에서의 변위를 구조의 변형 에너지의 편도함수와 관련시킵니다. 중앙에 점하중이 있는 단순 지지 빔은 지지대에서 대칭 반력을 가지며 각 지지대는 하중의 절반을 지탱합니다. 빔을 따라 있는 임의의 지점에서의 굽힘 모멘트는 가장 가까운 지지점으로부터의 거리에 따라 계산된 이러한 반응에서 파생됩니다.

카스티글리아노의 정리는 하중이 가해지는 지점에서의 처짐은 하중에 대한 빔의 변형 에너지를 차별화하여 결정된다는 것을 나타냅니다. 변형 에너지는 빔을 따른 굽힘 모멘트를 빔 길이에 걸쳐 통합하여 계산합니다. 이 빔의 경우 굽힘으로 인한 변형 에너지는 빔 길이의 절반을 따라 적분된 굽힘 모멘트 표현의 제곱으로 계산됩니다.

<img alt="Equation 1" src="/files/ftp_upload/15689/15689_Equation_1.svg" style="height: 106px;">

빔이 대칭이기 때문에 이 값은 전체 빔을 설명하기 위해 두 배가 되고 빔 중심의 편향이 계산됩니다. 이는 하중 크기, 빔 길이의 세제곱에 따라 달라지며 관성 모멘트와 빔 단면의 탄성 계수의 곱에 반비례합니다.

<img alt="Equation 2" src="/files/ftp_upload/15689/15689_Equation_2.svg" style="height: 42px;">

중심에서 점 하중 F를 전달하는 길이 L의 단순하게 지지되는 빔 PQ를 고려하십시오. 빔 중심의 처짐은 무엇입니까?
여기, ...

Education

교육

JoVE Core

Mechanical Engineering

기계공학

Unit 1

제1단원

Energy Methods

에너지 방법

KEY TERMS AND CONCEPTS

주요 용어 및 개념

Castigliano&#39;s Theorem: Problem Solving

beam deflection from central load

Beam deflection from a central load can be found with Castigliano's theorem. The method applies to a simply supported beam with a point load at the center. It links the deflection at the load point to the strain energy stored in the beam.

For this beam, the supports share the load equally. Each support carries half of the force. The bending moment at any point along the beam comes from these reactions and is written using the distance from the nearest support.

Castigliano's theorem says the displacement at the load point is found by taking the partial derivative of the strain energy with respect to the load. Strain energy is the energy stored by the beam as it bends. It is calculated from the bending moment along the beam and integrated over the beam length.

Because the beam is symmetric, the strain energy is first found over half the beam and then doubled for the full length. The center deflection depends on the load, the cube of the beam length, and the beam's moment of inertia and elastic modulus. It is inversely proportional to the product of those two material and cross-section properties.

Beam Deflection from Central Load

strain energy

Load-Deformation and Stored Strain Energy

Strain energy is the energy stored in a material when it deforms under load. It is a key idea in materials science and structural engineering. A loaded rod fixed at one end shows this clearly. When an axial force pulls on the free end, the rod stretches and stress builds inside it. As the axial force increases, the rod elongates more. This creates a direct link between the applied force and the amount of deformation. Engineers can show this relationship with a load-deformation plot. The plot...

strain-energy density

Energy Stored in Loaded Rods

Energy stored in a rod under axial load helps show how a material will respond to stretching and breaking. When the rod elongates, it stores strain energy as potential energy inside the material. Strain energy density is the amount of that energy per unit volume. In the elastic region, stress and strain have a linear relationship that follows Hooke's Law. The strain energy density in this region is found from the area under the stress-strain curve up to the elastic limit. This recoverable...

elastic strain energy for normal stresses

elastic-strain-energy-for-normal-stresses

Strain Energy in Stressed Materials

Strain energy in stressed materials describes the energy stored when a material deforms under load. It is an important idea in materials science and engineering. For axial loading with a uniform stress distribution, the stress is the internal force divided by the cross-sectional area, and the strain follows from the stress through the modulus of elasticity. When the stress is uniform, the strain energy density can be found from the product of stress and strain. That density is then integrated...

elastic strain energy for shearing stresses

elastic-strain-energy-for-shearing-stresses

Shear Energy Stored in Twisted Shafts

Shear energy stored in twisted shafts depends on elastic strain energy in a material. This energy is stored when a solid is deformed within its elastic limit. It comes from internal work done against the cohesive forces inside the material. When a material carries shearing stress, it also develops shearing strain. The strain energy density is the energy stored per unit volume. Within the elastic limit, stress is proportional to strain through the modulus of rigidity, so the strain energy...

impact loading

Impact Loading on a Fixed Rod

Impact loading on a fixed rod happens when a moving object strikes a stationary rod that has a uniform cross-sectional area and is fixed at one end. The impact makes the rod deform and begin to develop stress. This setup shows how a sudden hit can store energy in a structure. As the rod moves back toward its original shape, the stress rises to a maximum. At that point, the energy from the moving object has changed from kinetic energy into strain energy. Kinetic energy is the energy of motion,...

impact loading on a cantilever beam

Dropped-Weight Bending of a Cantilever Beam

Dropped-weight bending of a cantilever beam shows how impact loading changes a beam’s shape and stress. The beam has a circular cross-section and is fixed at one end. An object is dropped on the free end from a height h, so its potential energy from gravity becomes kinetic energy at impact. After the object hits the beam, the beam bends and develops a bending moment along its length. The bending is not uniform. The fixed end carries the highest strain energy, which is the energy stored in the...

castigliano&#39;s theorem

Using Strain Energy to Find Deflection

Castigliano's theorem uses strain energy to find deflection and rotation in elastic structures. Strain energy is the work done by external loads during elastic deformation. The theorem links that energy to the movement caused by the load. The key idea is simple. The partial derivative of the total strain energy with respect to a specific force gives the displacement at the point where that force acts. The same method also works for a moment, where the derivative gives the rotation at the point...

castigliano&#39;s theorem: problem solving

Beam deflection from a central load can be found with Castigliano's theorem. The method applies to a simply supported beam with a point load at the center. It links the deflection at the load point to the strain energy stored in the beam. For this beam, the supports share the load equally. Each support carries half of the force. The bending moment at any point along the beam comes from these reactions and is written using the distance from the nearest support. Castigliano's theorem says the...

key terms and concepts

Learn how Castigliano's theorem is used to find the center deflection of a simply supported beam with a central point load using strain energy.

Beam Deflection from Central Load | JoVE K12

JoVE Core Mechanical Engineering offers concise, easy-to-understand animated videos covering key topics such as equilibrium, forces, truss analysis, and structural mechanics. Explore their real-world applications, and witness these concepts in action through scientist-led experiments.

mechanical engineering

Beam Deflection from Central Load

Description

Transcript

Tags