Name: three-winding transformer models
Uploaded: 2024-11-21T14:54:19.000Z
Duration: 1 min 19 s
Channel: JoVE

Three identical single-phase transformers form a three-phase connection with high-voltage and low-voltage terminals configured across all four winding types.
Base quantities for a grounded Y-Y transformer&#39;s per-unit equivalent circuit include a common base complex power and a voltage base ratio matching the ratio of rated line-to-line voltages.
Balanced currents in this transformer yield zero neutral currents, making its per-unit equivalent circuit similar to a single-phase ideal transformer.
Extending two-winding transformer equations gives the relations needed for a single-phase three-winding transformer.
These relations, written in actual and per-unit measures, satisfy the per-unit equivalent circuit.
The practical three-winding transformer circuit includes external series impedance and shunt admittance branches evaluated via an open-circuit test.
With one winding open, the three-winding transformer acts like a two-winding one. Standard short-circuit tests evaluate per-unit leakage impedances, further simplified by neglecting the shunt admittance branches.
Finally, per-unit series impedances are derived from the leakage impedances.

drie-wikkelingstransformatoren

Er kunnen drie identieke eenfasetransformatoren kunnen worden geconfigureerd om een ​​driefasetransformatorverbinding te vormen, wat zowel hoogspannings- als laagspanningswikkelingen omvat. De hoogspanningswikkelingen worden aangeduid met hoofdletters A-B-C, terwijl de laagspanningswikkelingen worden gelabeld met kleine letters a-b-c, die zo respectievelijk hun fasen vertegenwoordigen. Deze notatie helpt onderscheid te maken tussen de hoog- en laagspanningszijden van de transformator.

In een per-unit circuit van een geaarde Y-Y driefasentransformator zijn basisgrootheden essentieel voor het vereenvoudigen van de analyse. De base complex power blijft hetzelfde in het systeem en de spanningsbasisverhouding wordt aangegeven door de verhouding van de nominale lijn-tot-lijnspanningen van de transformator. Deze basisgrootheden zorgen voor consistentie en helpen bij het vergelijken van verschillende componenten en systemen.

Voor gebalanceerde stromen in de transformator worden de neutrale stromen op nul gezet. Zo zijn er ook geen spanningsvallen over neutrale impedanties. Dit resulteert in een per-unit equivalent circuit dat lijkt op een eenfase ideale transformator, wat de analyse en het begrip van het driefasensysteem vereenvoudigt.

Om de benodigde relaties voor een eenfase drie-wikkelingstransformator af te leiden, breiden we de vergelijkingen van twee-wikkelingstransformatoren uit. Deze verbanden kunnen worden uitgedrukt in zowel echte als per-unitsmaten, waardoor ze voldoen aan het per-unit equivalent circuitmodel. Deze uitbreiding is cruciaal voor het nauwkeurig weergeven van het praktische gedrag van drie-wikkelingstransformatoren.

In een praktisch drie-wikkelings transformatorcircuit zijn externe serie-impedanties en shunt admittance branches belangrijke factoren. Deze elementen worden doorgaans geëvalueerd via een open-circuittest. Wanneer één wikkeling van de drie-wikkelings transformator open is, gedraagt ​​de transformator zich als een twee-wikkelings transformator. Deze eigenschap, samen met standaard kortsluittests, wordt gebruikt om de lekimpedanties per eenheid van de transformator te bepalen. De shunt admittantietakken worden echter vaak verwaarloosd voor vereenvoudiging.

De resultaten van kortsluittests leveren lekimpedanties per eenheid op, die de serie-impedantie-elementen in het equivalente circuit van de transformator vertegenwoordigen. Door te focussen op deze serie-impedanties per eenheid en shunt-admittantietakken te verwaarlozen, kan het equivalente circuit worden vereenvoudigd, wat een duidelijker inzicht in de prestaties van de transformator oplevert.

Al met al, deze methoden helpen bij het modelleren, analyseren en vereenvoudigingen van het complexe gedrag van drie-wikkelingstransformatoren in driefasensystemen. Deze aanpak zorgt ervoor dat het equivalente circuit nauwkeurig zowel de ideale als praktische kenmerken van de transformator weergeeft, wat efficiënt ontwerp en werking binnen elektrische systemen mogelijk maakt.

Drie-wikkelingstransformatoren

Three identical single-phase transformers form a three-phase connection with high-voltage and low-voltage terminals configured across all four winding ...

Education

JoVE Core

Electrical Engineering

Elektrotechniek

Unit 1

Power Transformers

Vermogenstransformatoren

KEY TERMS AND CONCEPTS

BELANGRIJKSTE TERMEN EN CONCEPTEN

Three-Winding Transformers

three-winding transformer models

Three-winding transformer models show how three identical single-phase transformers can be combined into a three-phase transformer connection. The high-voltage windings are labeled A, B, and C. The low-voltage windings are labeled a, b, and c. This notation separates the high-voltage side from the low-voltage side and matches each phase to its own winding.

For a grounded Y-Y three-phase transformer, the per-unit equivalent circuit uses common base quantities to simplify analysis. The base complex power is the same throughout the system. The voltage base ratio matches the ratio of the rated line-to-line voltages of the transformer. These base values make it easier to compare parts of the system on the same scale.

Balanced currents in the transformer produce zero neutral current. As a result, there is no voltage drop across the neutral impedance. The per-unit circuit then looks like a single-phase ideal transformer, which makes the three-phase system easier to study.

The relations for a single-phase three-winding transformer are built by extending the equations used for two-winding transformers. These relations can be written in actual values or in per-unit form. That approach keeps the equations consistent with the per-unit equivalent circuit and helps describe practical transformer behavior.

In a practical three-winding transformer circuit, external series impedances and shunt admittance branches are important. These elements are usually evaluated with an open-circuit test. When one winding is open, the transformer behaves like a two-winding transformer. Standard short-circuit tests are then used to find the per-unit leakage impedances.

The shunt admittance branches are often ignored to keep the model simpler. The short-circuit test results provide the per-unit leakage impedances, which represent the series impedance part of the equivalent circuit. By focusing on these series impedances, the model gives a clearer picture of transformer performance while still capturing the key ideal and practical features of three-winding transformers in three-phase systems.

Three-Winding Transformer Models

the ideal transformer

Transformer Core Flux and Turn Ratio

Single-phase two-winding transformers use two windings around a magnetic core. The core has a cross-sectional area A and magnetic permeability μ. A phasor current i1 enters the left winding, and i2 exits the right winding. These parts work together to move energy by electromagnetic means. Ampere’s law explains the magnetic field inside the transformer. It says that the closed-path integral of the magnetic field intensity’s tangential component equals the net current enclosed. For a...

equivalent circuits for practical transformers

equivalent-circuits-for-practical-transformers

Modeling Transformer Losses with Equivalent Circuits

Practical transformer equivalent circuits show how winding resistance, leakage reactance, and finite core permeability change transformer behavior. These non-ideal features create real and reactive power losses, so they matter when a transformer is under load. Each winding has resistance and leakage reactance. Winding resistance causes resistive loss, which appears as heat. Leakage reactance comes from leakage flux, and it creates a voltage drop and reactive power loss. In the equivalent...

three-winding transformers

Three-winding transformer models show how three identical single-phase transformers can be combined into a three-phase transformer connection. The high-voltage windings are labeled A, B, and C. The low-voltage windings are labeled a, b, and c. This notation separates the high-voltage side from the low-voltage side and matches each phase to its own winding. For a grounded Y-Y three-phase transformer, the per-unit equivalent circuit uses common base quantities to simplify analysis. The base...

transformers with off-nominal turns ratios

transformers-with-off-nominal-turns-ratios

Modeling Parallel Transformers with Base Mismatch

Parallel transformers can be modeled with per-unit values even when the chosen voltage bases do not match the transformer ratings. This case creates an off-nominal turns ratio, which means the base voltages are not proportional to the rated voltages. To handle that mismatch, the transformer voltage relation is adjusted by using the ratio of the selected bases. One way to represent the transformer is as two series transformers. The first is the standard per-unit model, which includes the...

key terms and concepts

Learn how three-winding transformer models use per-unit base values, neutral currents, and test data to build practical three-phase equivalent circuits.

Three-Winding Transformer Models | JoVE K12

JoVE Core Electrical Engineering offers easy-to-understand animated videos that cover fundamental concepts of electric circuits along with circuit analysis techniques. It incorporates first-order and second-order circuits using operational amplifiers and circuit transformation concepts. The inclusion of practical design examples and real-world applications through scientist-in-action videos adds significant educational value, making complex concepts accessible.

Three-Winding Transformer Models

Description

Transcript

Tags