Name: doppler radar and heart blood flow
Uploaded: 2023-04-30T11:11:59.000Z
Duration: 1 min 5 s
Channel: JoVE

K12 Standards

ohios-learning-standards-and-model-curriculum

Ohio’s Learning Standards and Model Curriculum

9-12

Physical Science

Energy And Waves

Waves

Doppler Effect - II

Efekt Dopplera jest opisywany jako zmiana obserwowanej częstotliwości fal dźwiękowych, gdy źródło fal porusza się względem obserwatora.
Na przykład, gdy wóz strażacki zbliża się do człowieka, emitowane fale dźwiękowe gromadzą się, tworząc przesunięcie częstotliwości w górę, co jest interpretowane jako wysoki ton.
Jednak gdy wóz strażacki oddala się, fale rozchodzą się, a mężczyzna obserwuje pozorne przesunięcie częstotliwości w dół, co jest interpretowane jako niski ton.
W innym przypadku, gdy mężczyzna zbliża się do stojącego wozu strażackiego, uderza w więcej grzbietów fal, co skutkuje dźwiękiem o wysokiej częstotliwości. I odwrotnie, gdy mężczyzna się oddala, uderza w mniej grzbietów fal, co skutkuje niższą częstotliwością dźwięku.
Tak więc efekt Dopplera można zaobserwować w dwóch przypadkach: po pierwsze, gdy źródło zbliża się do stacjonarnego obserwatora lub od niego oddala, a po drugie, gdy obserwator zbliża się do stacjonarnego źródła lub od niego oddala.

efekt dopplera - ii

Efekt Dopplera ma kilka praktycznych zastosowań w świecie rzeczywistym. Na przykład meteorolodzy wykorzystują radary dopplerowskie do interpretacji zdarzeń pogodowych w oparciu o efekt Dopplera. Zazwyczaj nadajnik emituje fale radiowe o określonej częstotliwości w kierunku nieba ze stacji pogodowej. Fale radiowe odbijają się od chmur i opadów i wracają do stacji pogodowej. Częstotliwość radiowa fal odbitych z powrotem do stacji wydaje się zmniejszać, jeśli chmury lub opady oddalają się od stacji, natomiast wzrasta, jeśli zbliżają się do stacji. Technologię tę można również zastosować do określenia prędkości i kierunku wiatru.

Podobnie efekt Dopplera ma zastosowanie w fizyce medycznej. W echokardiogramie dopplerowskim fale dźwiękowe o określonej częstotliwości kierowane są do serca i odbijają się od komórek krwi przemieszczających się przez serce i naczynia krwionośne. Podobnie jak radar dopplerowski, kardiolodzy mogą zrozumieć prędkość i kierunek przepływu krwi w sercu dzięki zmianie częstotliwości odbieranych po odbiciu. Może to pomóc im zidentyfikować obszary niedrożności serca.

Ten tekst jest adaptacją <a href="https://openstax.org/books/university-physics-volume-1/pages/17-7-the-doppler-effect">Openstax, University Physics, tom 1, sekcja 17.7: Efekt Dopplera.</a>

Efekt Dopplera - II

Efekt Dopplera ma kilka praktycznych, rzeczywistych zastosowań. Na przykład meteorolodzy używają radarów dopplerowskich do interpretacji zdarzeń pogodowych na podstawie ...

Education

JoVE Core

Physics

Fizyka

Unit 1

Jednostka 1

Sound

Dźwięk

KEY TERMS AND CONCEPTS

Kluczowe terminy i pojęcia

doppler radar and heart blood flow

Doppler effect applications appear in weather forecasting and medical imaging. In these uses, a change in frequency helps show motion. The reflected signal can reveal whether an object is moving toward or away from the source.

Meteorologists use Doppler radar to study weather events. A transmitter sends radio waves at a set frequency toward the sky from a weather station. The waves bounce off clouds and precipitation and return to the station. If the reflected radio frequency decreases, the clouds or precipitation are moving away. If it increases, they are moving toward the station. This method can also help determine wind speed and wind direction.

The Doppler effect is also useful in medical physics. In a Doppler echocardiogram, sound waves of a chosen frequency are sent into the heart. They reflect off blood cells moving through the heart and blood vessels. The shift in the returned frequency lets cardiologists estimate the speed and direction of blood flow. It can also help them find areas of obstruction in the heart.

Doppler Radar and Heart Blood Flow

sound waves

How Sound Travels Through Matter

Sound travels through matter as pressure changes in a medium. These changes make the particles of the medium move back and forth around their mean position. Sound can also be modeled as particle displacement as the wave passes through air, water, or another material. In most fluids, sound waves are longitudinal waves. That means the particles vibrate in the same direction that the wave moves. Fluids do not support lateral pressure well, so sound in liquids and gases mainly moves this way. <br...

sound as pressure waves

Sound Pressure in Longitudinal Waves

Sound waves are longitudinal waves that create changing pressure in a medium. Their displacement amplitude can be modeled as a function of position and time. As one column of the medium moves, nearby columns also move. The difference between these successive displacements produces a pressure change compared with the surrounding pressure. This pressure change is called gauge pressure. It varies across the medium because the pressure fluctuation depends on how much one point is displaced...

/files/media/science-education/science-education-thumbs/14724.jpg

perception of sound waves

How Ear Sensitivity Shapes Sound

The human ear does not respond the same way to every sound frequency. Sounds with the same pressure can seem louder or softer when their frequencies change. Ear health also affects this perception, and hearing can decline with age. Regular exposure to loud noises may also damage the ears over time. Pitch depends on both frequency and pressure amplitude, which is the size of the sound wave’s pressure change. Two sounds with the same frequency and pressure amplitude have the same pitch. If the...

speed of sound in solids and liquids

Why Sound Moves Faster in Dense Materials

Sound moves faster in solids and liquids because their particles are close together and can pass along disturbances quickly. Most solids and liquids are incompressible, which means their densities stay nearly constant throughout. When an external force acts on them, the molecules try to return to their original positions. That restoring motion happens because the particles interact with one another. These interactions let sound waves carry information through the material. As a result, sound...

speed of sound in gases

What Changes Sound Speed in Gases?

Sound speed in gases depends on gas properties, pressure, volume, and temperature. Gas molecules move freely, so gases are highly compressible. Because of that compressibility, sound waves travel more slowly through gases than through many other media. The speed of sound in an ideal gas can be found using thermodynamics. Thermodynamics links pressure, volume, and temperature, which helps describe how sound moves through a gas. Newton's laws of motion and the continuity equation from fluid...

deriving the speed of sound in a liquid

Sound Speed in Fluids: Bulk Modulus

Sound speed in fluids depends on a fluid’s bulk modulus and density. These two properties describe how stiff the fluid is and how much inertia it has. For mechanical waves in a fluid, that relationship follows the same pattern used for Young’s modulus and density in solids. The speed of sound in a liquid can be derived by treating the wave as a longitudinal wave moving through the medium. The derivation uses the gauge pressure expression and the impulse-momentum theorem. This same result...

/files/media/science-education/science-education-thumbs/14725.jpg

sound intensity

Measuring How Loud Sound Is

Sound intensity helps describe how loud a sound source is. It depends on how energetically the source vibrates, because those vibrations make the molecules in the medium vibrate as well. Intensity is the energy emitted per unit time per unit area. The area must be perpendicular to the direction the sound wave travels. Using time and area makes the measure reflect the source’s own loudness, even when the source vibrates over a longer time or spreads energy over a larger area. A sound source...

sound intensity level

Measuring Sound with Decibels

Sound intensity level helps measure how loud sound is. The human ear sends sound waves to the brain, and the brain turns those waves into hearing. The loudness of the surrounding environment affects whether a person can tell different sound sources apart. The ear can detect a very wide range of sound intensity. Because of that range, scientists use a logarithmic scale to describe intensity level. Intensity level is a ratio of two intensities, so it has no unit. The standard reference is the...

intensity and pressure of sound waves

Sound Intensity from Displacement and Pressure

Sound intensity can be linked to displacement and pressure in a wave. The key idea is to use the wave expressions and the definition of intensity. To do that, the power carried by the particles is written as force times velocity, and the force per unit area is treated as pressure. The particle velocity can be found from the displacement of the medium. A sinusoidal term averages to zero over time because it is positive and negative for equal parts of each cycle. Its square does not average to...

/files/media/science-education/science-education-thumbs/14726.jpg

sound waves: interference

Sound Wave Interference in Speakers

Sound wave interference can change the loudness of sound when two waves meet. Sound waves may be modeled as longitudinal waves, where molecules move around an equilibrium position, or as pressure waves. When two identical waves from the same source overlap, their crests or troughs can add together. This is called constructive interference, and it increases amplitude. If identical waves start in phase but travel different path lengths, they can become out of phase. Then a crest can meet a...

interference: path lengths

Interference from Different Path Lengths

Interference from different path lengths explains how two sound sources can create changing patterns in space. The sources may or may not start in phase, but they emit waves at the same frequency. When they are in phase, they are called coherent sources, and that is easy to arrange by feeding both speakers from the same source, such as a tuning fork. These synchronized sources start with the same frequency and the same phase. As the waves move outward, they travel different distances to reach...

/files/media/science-education/science-education-thumbs/14727.jpg

sound waves: resonance

Sound Waves in Tubes and Strings

Sound waves can form resonance patterns in strings and tubes when the boundary conditions match the wave frequency. On a string under tension, symmetrical boundary conditions create a node at each end. A node is a fixed point where the string does not move. Some frequencies then produce standing waves, while other frequencies interfere destructively. Resonance also appears in a hollow tube. In a tube closed at one end and open at the other, a vibrating tuning fork near the open end sends an...

beats

Sound Interference and Beats

Sound interference creates beats when two or more close frequencies combine. In music, this shows up as a changing loudness that rises and falls. The pattern comes from superposition, the adding together of waves. Constructive interference makes the sound stronger, while destructive interference makes it weaker. Music usually contains many changing frequencies from instruments and voices. A single sound at one frequency for a long time can feel dull or even irritating. It can sound like the...

/files/media/science-education/science-education-thumbs/14728.jpg

doppler effect - i

Doppler Shift in Sound and Light

The Doppler effect describes how the frequency of a wave changes when the source and the observer move relative to each other. It was named after the Austrian physicist and mathematician Christian Johann Doppler in 1842. He studied both moving sources and moving observers. A simple example is an ambulance passing a person standing on a street corner. As the ambulance approaches, the siren seems louder. As it moves away, the sound gets quieter. The pitch also changes. The high siren sound...

doppler effect - ii

Doppler effect applications appear in weather forecasting and medical imaging. In these uses, a change in frequency helps show motion. The reflected signal can reveal whether an object is moving toward or away from the source. Meteorologists use Doppler radar to study weather events. A transmitter sends radio waves at a set frequency toward the sky from a weather station. The waves bounce off clouds and precipitation and return to the station. If the reflected radio frequency decreases, the...

shock waves

Sonic Booms and Supersonic Motion

Sonic booms and supersonic motion happen when a sound source moves as fast as, or faster than, sound in the medium. In the Doppler formula for sound, it is usually assumed that sound travels faster than the source. When that assumption fails, a shock wave can form. As the source gets close to the speed of sound, successive wavefronts build up by constructive interference right behind it. Scientists once thought this pressure buildup would keep an airplane from breaking the sound barrier and...

echo

Echo Sound and Distance Detection

Echo is a reflected sound that returns after the original sound has been heard. The human ear cannot tell two sounds apart if they arrive within about 0.1 seconds of each other. When the reflected sound takes longer than that to return, the ear hears two separate sounds instead of one. This effect is easy to notice when the sound source is close to a surface that sends the sound back. If the sound and its reflection are separated by enough time, the result is an echo. A minimum distance of...

/files/media/science-education/science-education-thumbs/14729.jpg

key terms and concepts

See how the Doppler effect helps meteorologists track weather and cardiologists measure blood flow using radar and echocardiograms.

Doppler Radar and Heart Blood Flow | JoVE K12

physics

JoVE Core Physics introduces the theory and application of fundamental physics topics, including kinematics, dynamics, fluid mechanics, statics, waves, and acoustics, with concise and easy-to-understand animated videos. Additionally, the scientist-in-action videos demonstrate the application of related concepts in classical and original research experiments performed in today's laboratories worldwide.

Alabama Course of Study Science

waves-and-their-applications-in-technologies-for-information-transfer

Waves and Their Applications in Technologies for Information Transfer

9-12.PS.2.2.d

Earth and Space Science

Earth's Place in the Universe

9-12.ESS.1.2.b

9-12.ESS.1.3.a

9-12.P.3.7.b

Next Generation Science Standards

High School

HS-PS4-1

Florida Department of Education

SC.912.P.10

SC.912.P.10.21

Texas Essential Knowledge and Skills

PHYS.8

PHYS.8.D

Georgia Standards of Excellence

SPS9.

changes-in-sound-waves-associated-with-the-doppler-effect

Changes in Sound Waves Associated with the Doppler Effect.

SP4.

Characteristics of Sounds Waves

Energy

The universe is composed of matter in different forms, and all forms of matter contain energy.&#160; The different forms of energy on Earth originate from ...

Types of Potential Energy

Potential energy is also known as energy at rest or stored energy. Common types of potential energy include the gravitational potential energy stored in ...

Types of Kinetic Energy

The amount of kinetic energy of an object depends on its mass and speed. Consider two balls of different masses rolling down an inclined plane at the same ...

Gravitational Potential Energy

Potential energy is not just a property of each object, but also a property of the interactions between objects in a chosen system. For each type of ...

Elastic Potential Energy

Elastic potential energy is the energy stored as a result of the deformation of an elastic object, such as the stretching of a spring. An object is ...

Conservation of Mechanical Energy

The mechanical energy E of a system is the sum of its potential energy U and the kinetic energy K of the objects within it. What happens to this ...

/files/media/science-education/science-education-thumbs/14702.jpg

Conservation of Energy

The terms &#39;conserved quantity&#39;&#160;and &#39;conservation law&#39;&#160;have specific scientific meanings in physics, which differ from the ...

Conservation of Energy: Application

When solving problems using the energy conservation law, the object (system) to be studied should first be identified. Often, in applications of energy ...

• Quantifying kinetic energy 
• Quantifying gravitational potential energy

Content elaboration: Energy content learned in middle school, specifically conservation of energy and the basic differences between kinetic and potential energy, is elaborated on and quantified in this course. Energy has no direction and has units of joules (J). Kinetic energy, Ek, can be mathematically represented by $E_{k}=\frac{1}{2}mv^{2}$. Gravitational potential energy, $E_{g}$, can be mathematically represented by $E_{g}=mgh$. The amount of gravitational potential energy of an object is measured relative to a reference that is considered to be at a point of zero energy. The reference may be changed to help understand different situations. Only the change in the amount of energy can be measured absolutely. The conservation of energy and equations for kinetic and gravitational potential energy can be used to calculate values associated with energy (e.g., height, mass, speed) for situations involving energy transfer and transformation. Opportunities to quantify energy from data collected in experimental situations (e.g., a swinging pendulum, a car traveling down an incline) should be provided.

Conservation of energy

Mechanisms of Heat Transfer I

Just as interesting as the effects of heat transfer on a system are the methods by which the heat transfer occur. Whenever there is a temperature ...

Mechanisms of Heat Transfer II

In convection, thermal energy is carried by the large-scale flow of matter. Ocean currents and large-scale atmospheric circulation, which result from the ...

conduction-convection-and-radiation-problem-solving

Conduction, Convection and Radiation: Problem Solving

There are three methods by which heat transfer can take place: conduction, convection, and radiation. Each method has unique and interesting ...

Work

Work is done when energy is transferred from one object to another. In other words, work is when a force acts on something that undergoes a displacement ...

Quantifying Heat

Thermal Energy&#160;

Microscopically, thermal energy is the kinetic energy associated with the random motion of atoms and molecules. Temperature is a ...

Quantifying Work

As a system undergoes a change, its internal energy can change, and energy can be transferred from the system to the surroundings, or from the ...

Transfer and transformation of energy (including work)

Content elaboration: In middle school, concepts of energy transfer and transformation were addressed. Topics included conservation of energy, conduction, convection and radiation, the transformation of electrical energy, and the dissipation of energy into thermal energy. Work was introduced as a method of energy transfer into or out of the system when an outside force moves an object over a distance. In this course, these concepts are further developed. As long as the force, F, and displacement, $\Delta x$ are in the same or opposite directions, work, W, can be calculated from the equation $W=F\Delta x$. Work can also be quantified as $W=\Delta E$. Energy transformations for a phenomenon can be represented through a series of pie graphs or bar graphs. Equations for work, kinetic energy and potential energy can be combined with the law of conservation of energy to solve problems; conceptual understanding of kinetic energy, potential energy and work should be emphasized. [cite: 218, 219] When energy is transferred from one system to another, some of the energy is transformed to thermal energy. Since thermal energy involves the random movement of many trillions of subatomic particles, it is less able to be organized to bring about further change. Therefore, even though the total amount of energy remains constant, less energy is available for doing useful work.

transfer-and-transformation-of-energy-including-work

Transfer and transformation of energy (including work)

Travelling Waves

A wave is a disturbance that propagates from its source, repeating itself periodically, and is typically associated with simple harmonic motion. ...

Wave Parameters

The simplest mechanical waves are associated with simple harmonic motion and repeat themselves for several cycles. These simple harmonic waves can be ...

Interference and Superposition of Waves

When two waves of the same nature occur in the same region simultaneously, they result in interference. Interference of waves implies that the net effect ...

Reflection of Waves

When a wave travels from one medium to another, it gets reflected at the boundary of the second medium. A common example of this is when a person yells at ...

Propagation of Waves

When a wave propagates from one medium to another, part of it may get reflected in the first medium, and part of it may get transmitted to the second ...

Sound Waves

Sound waves can be thought of as fluctuations in the pressure of a medium through which they propagate. Since the pressure also makes the medium&#39;s ...

Sound Waves: Interference

Sound waves can be modeled either as longitudinal waves, wherein the molecules of the medium oscillate around an equilibrium position, or as pressure ...

Interference: Path Lengths

Consider two sources of sound, that may or may not be in phase, emitting waves at a single frequency, and consider the frequencies to be the same.
Two ...

Sound Waves: Resonance

Resonance is produced depending on the boundary conditions imposed on a wave. Resonance can be produced in a string under tension with symmetrical ...

Electromagnetic Waves

James Clerk Maxwell formulated a single theory combining all the electric and magnetic effects scientists knew during that time, calling the phenomena his ...

The Electromagnetic Spectrum

Electromagnetic waves are categorized according to their wavelengths and frequencies, giving the electromagnetic spectrum. These waves are classified as ...

propagation-speed-of-electromagnetic-waves

Propagation Speed of Electromagnetic Waves

Electromagnetic waves are consistent with Ampere&#39;s law. Assuming there is no conduction current Ampere&#39;s law is given as:


Consider a plane ...

Energy Carried By Electromagnetic Waves

Anyone who has used a microwave oven knows there is energy in electromagnetic waves. Sometimes, this energy is obvious, such as in the summer sun&#39;s ...

Doppler Effect - I

The Doppler effect and Doppler shift were named after the Austrian physicist and mathematician Christian Johann Doppler in 1842, who conducted experiments ...

The Doppler effect has several practical, real-world applications. For instance, meteorologists use Doppler radars to interpret weather events based on ...

• Refraction, reflection, diffraction, absorption, superposition
• Radiant energy and the electromagnetic spectrum
• Doppler shift

Content elaboration: As addressed in middle school, waves transmit energy from one place to another, can transfer energy between objects and can be described by their speed, wavelength, frequency and amplitude. These concepts were applied to seismic waves traveling through different materials. In elementary and middle school, reflection and refraction of light were introduced, as was absorption of radiant energy by transformation into thermal energy. In this course, these processes are conceptually addressed (not mathematically) from the perspective of waves and expanded to include other types of energy that travel in waves. When a wave encounters a new material, the new material may absorb the energy of the wave by transforming it to another form of energy, usually thermal energy. Waves can be reflected off solid barriers or refracted when a wave travels from one medium into another medium. Waves may undergo diffraction around small obstacles or openings. When two waves traveling through the same medium meet, they pass through each other and continue traveling through the medium as before. When the waves meet, they undergo superposition, demonstrating constructive and destructive interference. Sound travels in waves and undergoes reflection, refraction, interference and diffraction. In Physics, many of these wave phenomena will be studied further and quantified. Radiant energy travels in waves and does not require a medium. Sources of light energy (e.g., the sun, a light bulb) radiate energy continuously in all directions. Radiant energy has a wide range of frequencies, wavelengths and energies arranged into the electromagnetic spectrum. The electromagnetic spectrum is divided into bands that have different applications in everyday life: radio (lowest energy), microwaves, infrared, visible light, ultraviolet, X-rays and gamma rays (highest energy). Radiant energy of the entire electromagnetic spectrum travels at the same speed in a vacuum. Specific frequency, energy, or wavelength ranges of the electromagnetic spectrum are not required. However, the relative positions of the different bands, including the colors of visible light, are important (e.g., ultraviolet has more energy than microwaves). Total radiant energy depends on more than just the frequency. Radiant energy exhibits wave behaviors including reflection, refraction, absorption, superposition and diffraction. For opaque objects (e.g., paper, a chair, an apple), little if any radiant energy is transmitted into the new material. However, the radiant energy can be absorbed, usually increasing the thermal energy of the object and/or the radiant energy can be reflected. For rough objects, the reflection in all directions forms a diffuse reflection and for smooth shiny objects, reflections can result in clear images. Transparent materials transmit most of the energy through the material, but smaller amounts of energy may be absorbed or reflected. Changes in the observed frequency and wavelength of a wave can occur if the wave source and the observer are moving relative to each other. When the source and the observer are moving toward each other, the wavelength is shorter and the observed frequency is higher; when the source and the observer are moving away from each other, the wavelength is longer and the observed frequency is lower. [cite: 253, 254] This phenomenon is called the Doppler shift and can be illustrated by listening to an ambulance siren as it travels past. As discussed in the Universe section of this course, this phenomenon is important to current understanding of how the universe is expanding. As a result, the light we receive from distant galaxies has a noticeable shift toward redder wavelengths (the so-called "redshift"). Calculations to measure the apparent change in frequency or wavelength are not appropriate for this course.

Energy Basics

Chemical reactions, such as those that occur when you light a match, involve changes in energy as well as matter.

Chemical changes and their accompanying ...

Absorption of Radiation

The rate of heat transfer by emitted radiation is described by the Stefan-Boltzmann law of radiation:

where &#963; is the Stefan-Boltzmann constant, a ...

Phase Transitions

Whether solid, liquid, or gas, a substance&#39;s state depends on the order and arrangement of its particles (atoms, molecules, or ions). Particles in the ...

Heating and Cooling Curves

When a substance&#8212;isolated from its environment&#8212;is subjected to heat changes, corresponding changes in temperature and phase of the substance ...

Phase Diagrams

A phase diagram combines plots of pressure versus temperature for the liquid-gas, solid-liquid, and solid-gas phase-transition equilibria of a substance. ...

Conductors and Insulators

Some materials may easily let electrical charges pass through them, while others obstruct their flow. The former are called conductors and the latter ...

Temperature and Thermal Equilibrium

Heat and temperature are essential concepts for everyone every day. The study of heat and temperature is part of an area of physics known as ...

Content elaboration: In middle school, thermal energy is introduced as the energy of movement of the particles that make up matter. Processes of heat transfer, including conduction, convection and radiation, were studied. In other sections of this course, the role of thermal energy during heating, cooling and phase changes is explored conceptually and graphically. In this course, rates of thermal energy transfer and thermal equilibrium are introduced. Thermal conductivity depends on the rate at which thermal energy is transferred from one end of a material to another. Thermal conductors have a high rate of thermal energy transfer and thermal insulators have a slow rate of thermal energy transfer. The rate at which thermal radiation is absorbed or emitted by a system depends on its temperature, color, texture and exposed surface area. All other things being equal, in a given amount of time, black rough surfaces absorb more thermal energy than smooth white surfaces. An object or system is continuously absorbing and emitting thermal radiation. If the object or system absorbs more thermal energy than it emits and there is no change in phase, the temperature increases. If the object or system emits more thermal energy than is absorbed and there is no change in phase, the temperature decreases. For an object or system in thermal equilibrium, the amount of thermal energy absorbed is equal to the amount of thermal energy emitted; therefore, the temperature remains constant. [cite: 271, 272] In Chemistry, changes in thermal energy will be quantified for substances that change their temperature.

Thermal energy

Electrical Current

Electrical current is defined as the rate at which charge flows. When there is a large current present, such as that used to run a refrigerator, a large ...

Energy Transfer in Chemical Reactions

Chemical reactions require sufficient energy to cause the matter to collide with enough precision and force that old chemical bonds can be broken and new ...

Resistance

When a current moves through any conductor, the conductor causes some level of difficulty for the current to flow. The measure of that difficulty is known ...

Voltage

The movement of electrons in a conductor requires some form of energy or work, usually provided by an external force, like a battery. This force is called ...

• Movement of electrons 
• Current 
• Electric potential (voltage) 
• Resistors and transfer of energy

Content elaboration: In earlier grades, concepts of electrical conductors and insulators were introduced. A complete loop is needed for an electrical circuit that may be in parallel or in series. In this course, current, voltage and resistance are introduced conceptually to explain what was observed in middle school. The differences between electrical conductors and insulators can be explained by how freely the electrons flow throughout the material due to how firmly electrons are held by the nucleus. By convention, electric current is the rate at which positive charge flows in a circuit. In reality, it is the negatively charged electrons that are actually moving. Current is measured in amperes (A). An ampere is equal to one coulomb of charge per second $(C/s)$. In an electric circuit, the power source supplies the electrons already in the circuit with electric potential energy by doing work to separate opposite charges. For a battery, the energy is provided by a chemical reaction that separates charges on the positive and negative sides of the battery. This separation of charge is what causes the electrons to flow in the circuit. These electrons then transfer energy to other objects and transform electrical energy into other forms (e.g., light, sound, heat) in the resistors. Current continues to flow even after the electrons transfer their energy. Resistors oppose the rate of charge flow in the circuit. The potential difference or voltage across an energy source is a measure of potential energy in joules supplied to each coulomb of charge. The volt (V) is the unit of potential difference and is equal to one joule of energy per coulomb of charge $(J/C)$. Potential difference across the circuit is a property of the energy source and does not depend upon the devices in the circuit. These concepts can be used to explain why current will increase as the potential difference increases and as the resistance decreases. Experiments, investigations and testing (3-D or virtual) are used to construct a variety of circuits and to measure and compare the potential difference (voltage) and current. Circuits are dealt with conceptually in this course. Calculations are reserved for Physics.

Electricity

Doppler Radar and Heart Blood Flow

Description

Transcript

Tags

More videos by Standards