Name: how mass spectrometers sort ions
Uploaded: 2024-04-04T10:51:33.000Z
Duration: 1 min 16 s
Channel: JoVE

Spektrometr mas jonizuje cząsteczki i wytwarza widmo masowe z rozkładu fragmentów.
Pełni trzy funkcje: jonizację cząsteczek lub atomów, separację fragmentów jonów i detekcję jonów.
W jonizacji elektronów, powszechnej metodzie jonizacji, odparowana próbka w komorze jonizacyjnej bombardowana wiązką elektronów o wysokiej energii wytwarza rodnikowe kationy. Kation rodnikowy szybko rozpada się na obojętne cząsteczki, rodniki i kationy.
Kationy są następnie przyspieszane do komory analitycznej przez szereg ujemnie naładowanych płytek akceleratora.
Wiele popularnych analizatorów stosuje pole magnetyczne lub elektryczne do komory analitycznej, które zakrzywia trajektorie jonów w oparciu o ich masę i ładunek.
Tylko jony o określonych wartościach m/z mają dokładną trajektorię przejścia przez wąską szczelinę umieszczoną przed detektorem jonów dla danego pola magnetycznego lub elektrycznego.
Zmieniając pole, analizator masy skanuje szereg mas jonów, z ich obfitością zarejestrowaną w widmie masowym.

spektrometr mas

Mass Spectrometers

W tej lekcji szczegółowo opisano oprzyrządowanie spektrometru mas — fizycznego instrumentu służącego do wykonywania spektrometrii mas na cząsteczkach analitu i rejestrowania charakterystycznych widm masowych. Osiąga się to poprzez trzy główne funkcje:

<ol style="display: flex; flex-direction: column; gap: 10px;">
<li>Konwersja atomów/cząsteczek analitu w fazie gazowej w wiązkę dodatnich lub ujemnie naładowanych jonów poprzez jonizację.</li>
<li>Rozdzielenie naładowanych gatunków na podstawie ich stosunku masy do ładunku.</li>
<li>Rejestrowanie względnej obfitości każdego rodzaju jonów.</li>
</ol>

W komorze jonizacyjnej spektrometru mas odparowany analit w próżni uderzany jest elektronami o wysokiej energii. Energia elektronu wynosi około 70 eV i jest wystarczająca do oderwania elektronu od analitu. Powstały jon molekularny dalej rozpada się na naładowane cząsteczki i cząsteczki obojętne. Spektrometr mas rejestruje jedynie masę naładowanych substancji, ponieważ ładunek umożliwia kontrolę cząsteczek za pomocą pola elektrycznego lub magnetycznego.

Jon molekularny i jego naładowane fragmenty są przyspieszane przez szereg ujemnie naładowanych płytek akceleratora umieszczonych odpowiednio w detektorze w komorze analitycznej. Na ścieżkę pomiędzy płytką akceleratora a detektorem przykładane jest pole magnetyczne, co powoduje zakrzywienie ścieżki naładowanych cząstek. Przy stałym polu magnetycznym promień krzywizny zależy od masy cząsteczkowej naładowanych cząstek. Umieszczenie szczeliny przed detektorem gwarantuje, że do detektora dotrą wyłącznie naładowane cząstki o określonej masie cząsteczkowej.

Zmieniając pole magnetyczne, w detektorze można rejestrować naładowane cząstki o wszystkich masach cząsteczkowych, każdy na raz o unikalnej masie cząsteczkowej. Skanując wszystkie pola magnetyczne, spektrometr mas dostarcza informacji o względnej liczebności wszystkich naładowanych cząstek w postaci widma masowego.

Spektrometr mas

Ta lekcja zawiera szczegółowe informacje na temat oprzyrządowania spektrometru masowego - fizycznego instrumentu do wykonywania spektrometrii mas na cząsteczkach analitu i rejestrowania ...

Education

JoVE Core

Analytical Chemistry

Chemia analityczna

Unit 1

Jednostka 1

Principles of Mass Spectrometry

Zasady spektrometrii mas

KEY TERMS AND CONCEPTS

KLUCZOWE TERMINY I POJĘCIA

how mass spectrometers sort ions

A mass spectrometer sorts charged ions by their mass-to-charge ratio and records their relative abundance. It turns vaporized analyte molecules into ions, separates them, and then measures the signal from each type of ion.

The process begins in the ionization chamber. The analyte is in the gas phase inside a vacuum, and it is struck by high-energy electrons. The electrons have about 70 eV of energy, which is enough to remove an electron from the analyte and form a molecular ion.

After ionization, the molecular ion can break into charged fragments and neutral molecules. The instrument records only the charged species. Their charge allows them to be controlled by electric or magnetic fields.

Next, the molecular ion and its charged fragments are accelerated by a set of negatively charged accelerator plates. These plates move the ions toward the detector in the analyzing chamber. A magnetic field bends the path of the ions as they travel between the accelerator plate and the detector.

At a constant magnetic field, the radius of the curved path depends on the molecular mass of the charged species. A slit placed in front of the detector helps admit only ions with a particular molecular weight. By changing the magnetic field, ions of different molecular weights can reach the detector one at a time.

As the instrument scans through the magnetic fields, it records the relative abundance of the charged species. The result is a mass spectrum. This spectrum shows the ions detected across the range of molecular weights.

How Mass Spectrometers Sort Ions

mass spectrometry: overview

Mass Spectrometry and Molecular Identity

Mass spectrometry helps identify a compound by measuring its molecular mass and molecular formula. It does this by turning the analyte molecule into ions and then comparing ion abundance with mass-to-charge ratio. One common ionization method is electron ionization, or EI. In EI, high-energy electron beams strike analyte molecules in the gas phase. The beam removes an electron and leaves a molecular ion behind. A molecular ion is a radical cation, so it has a positive charge and an unpaired...

mass spectrometry: isotope effect

Isotope Peaks in Mass Spectra

Isotope peaks in mass spectra show how natural isotope mixtures change the signal of a molecule. Most elements occur as a mix of isotopes, which are atoms of the same element with different numbers of neutrons. Because isotopes have different masses, the same fragment can appear at more than one position in a spectrum. The mass of a molecule depends on which isotopes are present in its atoms. The size of each isotope peak also depends on how common those isotopes are in nature. Carbon is a...

mass spectrometry: molecular fragmentation overview

mass-spectrometry-molecular-fragmentation-overview

Mass Spectrometry Fragmentation Patterns

Mass spectrometry fragmentation patterns show how a molecular ion breaks apart after ionization. When a molecule loses an electron inside the mass spectrometer, its structure becomes unstable. The ion then fragments at bonds that often produce the most stable pieces. One common pattern is cleavage of a single bond in the molecular ion. This break forms a radical and a cation. The bond can split in more than one way, but the favored path is the one that gives the more stable carbocation rather...

mass spectrometers

A mass spectrometer sorts charged ions by their mass-to-charge ratio and records their relative abundance. It turns vaporized analyte molecules into ions, separates them, and then measures the signal from each type of ion. The process begins in the ionization chamber. The analyte is in the gas phase inside a vacuum, and it is struck by high-energy electrons. The electrons have about 70 eV of energy, which is enough to remove an electron from the analyte and form a molecular ion. After...

mass spectrum

Reading Peaks in a Mass Spectrum

A mass spectrum shows the charged fragments in an analyte as peaks plotted by mass-to-charge ratio, or m/z. The x-axis gives the mass of each charged fragment divided by the number of charges it carries. The y-axis shows the relative abundance of each charged species based on the signal intensity recorded at the detector. The tallest peak is called the base peak. It is assigned an abundance of 100%, and the other peaks are scaled against it. The peak from the molecular ion is called the parent...

mass spectrum: interpretation

Decoding Molecular Ions in Mass Spectra

Mass spectra help scientists identify an unknown compound by finding the molecular ion peak. The molecular ion peak shows the mass of the intact molecule, but it is often weak or missing because high-energy electron beams cause strong fragmentation. When that happens, a soft-energy electron beam can be used to scan the spectrum and improve the molecular ion signal. Other ionization methods can also give a stronger molecular ion peak. Chemical ionization, field ionization, and desorption...

mass analyzers: overview

Mass Analyzers and Ion Separation

Mass analyzers separate ions by their mass-to-charge ratio, or m/z, in a mass spectrometer. After a sample is vaporized in the ionization chamber, it is hit with a high-energy electron beam. This creates a radical cation and also produces neutral molecules, radicals, and cations. Negatively charged accelerator plates then push the cations into the mass analyzer, where they are sent on to the detector. Several mass analyzer designs are commonly used. These include magnetic sector,...

mass analyzers: common types

Quadrupole, TOF, and Ion Trap Analyzers

Quadrupole, time-of-flight, and ion trap mass analyzers each separate ions in a different way. They are common tools in mass spectrometry and help sort ions by their mass-to-charge ratio, or m/z. A quadrupole mass analyzer uses four cylindrical metal rods arranged in a diamond shape. The rods carry a direct current, or DC, voltage and a radio-frequency AC voltage. Ion motion depends on the field strength, so only ions with a certain m/z resonate and reach the detector at that setting. This...

high-resolution mass spectrometry (hrms)

Mass Accuracy in HRMS Analysis

High-resolution mass spectrometry separates ions by very small differences in mass. This matters because atomic masses are not always exact whole numbers, even though they are often rounded for simple calculations. Atomic mass is usually estimated by adding the masses of protons and neutrons. In reality, the proton and neutron do not have exactly the same mass. That creates small differences when atomic masses are compared to the simplest hydrogen atom. Helium, for example, is made of 2...

mass spectrometry: complex analysis

Hyphenated Mass Spectrometry Methods

Mass spectrometry can be paired with separation methods to study complex mixtures. This combination is called a hyphenated method. It helps when a pure mass spectrum is too hard to read because a mixture causes too much fragmentation and too many overlapping signals. GC-MS is one common hyphenated method. GC stands for gas chromatography, which separates volatile, thermally stable compounds in narrow capillary columns before they enter the mass spectrometer. This approach is widely used in...

tandem mass spectrometry

MS/MS Scan Modes and Fragment Ions

Tandem mass spectrometry uses two or more mass analyzers in series to improve selectivity and lower chemical noise during analyte detection. A set of analyzers separated by an interaction cell lets the instrument break ions apart and study the fragment ions that form. Fragmentation happens in the interaction cell and can be caused in several ways. Collision-induced dissociation, or CID, uses inert gases such as nitrogen, argon, or helium. Other methods include surface-induced dissociation...

gas chromatography&ndash;mass spectrometry (gc&ndash;ms)

How GC-MS Separates and Identifies Compounds

Gas chromatography-mass spectrometry (GC-MS) separates compounds in a mixture and then identifies them. A gas chromatograph first splits the mixture into its parts. A mass spectrometer then analyzes each part on its own to determine molecular masses and molecular structures. The gas chromatograph uses a long, narrow capillary column. The inner wall of the column has a polysiloxane coating. This coating serves as the stationary phase. It has a high boiling point, low viscosity, and low polarity.

inductively coupled plasma&#8211;mass spectrometry (icp&#8211;ms): overview

inductively-coupled-plasmamass-spectrometry-icpms-overview

ICP-MS Sample Ionization and Detection

ICP-MS uses an inductively coupled plasma torch to turn samples into ions for mass analysis. Solid samples are first dissolved and volatilized before they enter the hot argon plasma. Solution samples are nebulized, which means they are converted into a fine spray, and then passed through the same plasma. Inside the plasma, the analytes break apart. Their atoms become positively charged ions, along with some molecular species. These positive ions are sent to the mass spectrometer, where they...

inductively coupled plasma-mass spectrometry (icp-ms): interferences

inductively-coupled-plasma-mass-spectrometry-icp-ms-interferences

ICP-MS Signal Interference Sources and Fixes

Inductively coupled plasma-mass spectrometry (ICP-MS) is a sensitive method for elemental analysis, but its spectra can be affected by interferences. These interferences can make the mass signal less accurate, even when the instrument is working well. Spectroscopic interferences happen when ions in the plasma have the same mass-to-charge ratio, or m/z, as the analyte ion. This group includes isobaric interferences, polyatomic ion interferences, and refractory oxide ion interferences. Isobaric...

key terms and concepts

Learn how a mass spectrometer ionizes analytes, bends charged ions with a magnetic field, and records a mass spectrum for each molecular weight.

How Mass Spectrometers Sort Ions | JoVE K12

analytical chemistry

JoVE Core Analytical Chemistry simplifies complex chemical principles by breaking them down into clear, engaging animations, making topics from SI Units to NMR spectroscopy more accessible and straightforward. Additionally, the scientist-in-action videos highlight the application of these concepts in real-world research conducted in laboratories globally.

How Mass Spectrometers Sort Ions

Description

Transcript

Tags