Name: current flow in simple circuits
Uploaded: 2023-04-30T12:38:29.000Z
Duration: 1 min 10 s
Channel: JoVE

K12 Standards

north-carolina-k-12-science-standard-course-of-study

NC K-12 Science Standard Course of Study

9-12

Physical Science

motion-and-stability-forces-and-interactions

Motion and Stability- Forces and Interactions

PS.PSc.6.2

Electrical Current

A taxa na qual a carga flui é a corrente elétrica. A unidade SI para corrente elétrica é o ampère, que é definido como um coulomb de carga passando por uma área por segundo.
Considere uma lanterna com um interruptor, uma lâmpada, uma bateria e fios. O interruptor controla o circuito, enquanto o fio fornece um caminho de corrente entre os componentes.
As representações esquemáticas de circuitos usam símbolos padronizados e linhas sólidas para representar os componentes individuais do circuito e os fios de conexão.
O blub é representado como um círculo com um laço dentro, que indica o filamento. O interruptor é representado como dois pontos com uma barra condutora e a bateria como uma série de linhas longas e curtas.
Quando o interruptor é fechado, a lanterna acende, pois há um caminho completo para a carga fluir do terminal positivo para o negativo da bateria.
A direção da corrente convencional é sempre do terminal positivo para o negativo, enquanto o fluxo de elétrons é do terminal negativo para o positivo, pois os elétrons são carregados negativamente.

<ol>
	<li>OpenStax. (2019). Física Universitária Vol. 2. [Versão da Web], pág. 94 - 95. Obtido de <a href="https://openstax.org/books/university-physics-volume-2/pages/9-1-electrical-current">https://openstax.org/books/university-physics-volume-2/pages/9-1-electrical-current</a></li>
</ol>

corrente elétrica

A corrente elétrica é definida como a taxa na qual a carga flui. Quando há uma corrente grande presente, como aquela usada para alimentar uma geladeira, uma grande quantidade de carga se move através do fio em um curto período de tempo. Se a corrente for pequena, como aquela usada para operar uma calculadora portátil, uma pequena quantidade de carga se move através do circuito ao longo de um longo período de tempo. A unidade SI para corrente é o ampere (A), em homenagem ao físico francês André-Marie Ampère (1775-1836). Um ampere é o fluxo de um coulomb de carga através de uma área em um segundo. Uma corrente de um ampere resultaria em 6,25 × 1018 elétrons fluindo através da área a cada segundo. A maioria dos aparelhos elétricos possui classificação em amperes (ou ampères) exigidos para um funcionamento adequado, assim como fusíveis e disjuntores.

Considere um circuito simples de uma bateria de carro, um interruptor, uma lâmpada de farol e fios que fornecem um caminho para a corrente circular entre os componentes. Para que a lâmpada acenda, deve haver um caminho completo para o fluxo de corrente. O interruptor está lá para controlar o circuito. Um esquema é uma representação gráfica de um circuito e é muito útil na visualização dos principais recursos de um circuito. Esquemas usam símbolos padronizados para representar os componentes em um circuito e linhas sólidas para representar os fios que conectam os componentes. A bateria é mostrada como uma série de linhas longas e curtas, representando a pilha voltaica histórica. A lâmpada é mostrada como um círculo com um loop dentro, representando o filamento de uma lâmpada incandescente. O interruptor é mostrado como dois pontos com uma barra condutora para conectar os dois pontos, e os fios que conectam os componentes são mostrados como linhas sólidas.

Quando o interruptor está fechado, há um caminho completo para as cargas fluírem, do terminal positivo da bateria, através do interruptor, então através do farol e de volta ao terminal negativo da bateria. A direção da corrente convencional é sempre representada na direção em que a carga positiva fluiria, do terminal positivo ao terminal negativo. Por exemplo, em fios metálicos, a corrente é transportada por elétrons, ou seja, cargas negativas. Em soluções iônicas, como água salgada, tanto cargas positivas quanto negativas se movem.

Corrente elétrica

A corrente elétrica é definida como a taxa na qual a carga flui. Quando há uma grande corrente presente, como a usada para operar uma geladeira, uma grande ...

Education

JoVE Core

Physics

Física

Unit 1

Unidade 1

Current and Resistance

Corrente e Resistência

KEY TERMS AND CONCEPTS

TERMOS-CHAVE E CONCEITOS

current flow in simple circuits

Electrical current is the flow of charge in a circuit. A large current means a large amount of charge moves through a wire in a short time. A small current means only a small amount of charge moves through the circuit over a longer time. Examples include the current needed to run a refrigerator and the smaller current used by a handheld calculator.

The SI unit for current is the ampere, or amp. It is named for the French physicist André-Marie Ampère (1775–1836). One ampere means one coulomb of charge flows through an area in one second. A current of one amp would come from 6.25 × 10^18 electrons passing through that area each second. Most electrical appliances are rated in amperes, and fuses and circuit breakers are rated the same way for proper operation.

A simple circuit needs a complete path for current to flow. In a car battery circuit, the battery, switch, headlight lamp, and wires work together to make that path. The switch controls the circuit. When the switch is closed, charges can move from the positive terminal of the battery, through the switch, through the headlight, and back to the negative terminal.

Schematics help show this path with standard symbols. A battery is drawn as long and short lines, which represent the historic voltaic pile. A lamp is shown as a circle with a loop inside, and a switch is shown as two points with a conducting bar between them. The wires are shown as solid lines. Conventional current is drawn in the direction a positive charge would move, from positive to negative. In metal wires, electrons carry the current, so the moving charges are negative. In ionic solutions such as salt water, both positive and negative charges move.

Current Flow in Simple Circuits

electrical current

Electrical current is the flow of charge in a circuit. A large current means a large amount of charge moves through a wire in a short time. A small current means only a small amount of charge moves through the circuit over a longer time. Examples include the current needed to run a refrigerator and the smaller current used by a handheld calculator. The SI unit for current is the ampere, or amp. It is named for the French physicist André-Marie Ampère (1775–1836). One ampere means one coulomb of...

drift velocity

Electrical Current and Electron Drift

Electrical current in a conductor depends on moving charges and the tiny drift speed of those charges. When a free charge enters a wire, it pushes nearby charges ahead because like charges repel each other. That push spreads through the material very quickly, so the electrical signal moves through the system at nearly the speed of light. This fast signal is not the same as the slow motion of each charge. It is a rapidly spreading change in the electric field, often described as an electrical...

current density

Current Density in Wires and Solutions

Current density describes how much electric current passes through a given cross-sectional area. It helps show not just the size of the current, but also how it is distributed through a conductor. The current density can change from point to point because the local charge flow can vary. If the current flow is uniform, the amount of current is the same at every point along the conductor, even when the conductor’s area changes. Current density is measured in amperes per square meter. Its...

resistivity

Resistivity in Conductors and Insulators

Resistivity describes how much a material opposes electric current. When a voltage is applied to a conductor, an electric field forms. The charges in the conductor feel that force, and a current density develops. In some materials, including metals at a given temperature, the current density is approximately proportional to the electric field. In those cases, current density can be modeled with conductivity, written as sigma. Electrical conductivity is measured in (ohm·m)^−1. It tells how well...

resistance

Factors That Affect Electrical Resistance

Electrical resistance describes how much a conductor opposes the flow of current. It is represented by R. When current passes through a conductor, heat is also produced. Resistance is tied to the material’s resistivity, which is a property of the material used to make an electrical component. Resistance is different from resistivity. Resistivity belongs to the material itself, while resistance belongs to the finished component. To study this relationship, consider a wire with length L,...

ohm's law

Measuring Current, Voltage, and Resistance

Ohm's law describes the relationship between current, voltage, and resistance in many materials. In these cases, the current through a substance is directly proportional to the voltage applied to it. The idea was first shown experimentally by German physicist Georg Simon Ohm, who studied current in a metal wire. A material, component, or device that follows this pattern is called ohmic. An ohmic component has a current that increases in step with voltage. A material or component that does not...

non-ohmic devices

Diode Current and Reverse Bias

A diode is a nonohmic circuit element that makes current and voltage behave differently from Ohm’s law. In most substances, current is proportional to the voltage applied, but a diode does not show a linear current-voltage relationship. A diode is a semiconducting device with two terminals: an anode, which is the positive terminal, and a cathode, which is the negative terminal. It allows current to flow in only one direction. In a simple circuit with a battery, a diode, and a resistor, the...

electrical power

Power Limits in Electrical Circuits

Electrical power in a circuit depends on current and voltage. It is the product of these two values and is measured in watts, or joules per second. That relationship helps explain how much energy a circuit can deliver. A car’s auxiliary power outlet is one real-world example. Some outlets are rated at 20 amps and 12 volts, so they can deliver a maximum of 240 watts. That rating shows the upper limit of power the circuit can provide to devices such as a cell phone charger. Bulb wattage also...

electrical energy

Cutting Electric Bills with Efficient Lighting

Electrical energy is the energy transferred when electrons move from one point to another. The longer an appliance is used, the more electrical energy it consumes. If power stays constant, electrical energy equals the power used by the device times the time it runs. That is why longer use leads to a higher electric bill. Electric bills measure this energy in kilowatt-hours. One kilowatt-hour is equal to 3.6 × 10^6 joules. You can lower electrical energy use by cutting the time an appliance...

continuity equation

Charge Conservation and Current Flow

Charge conservation and current flow are linked through the continuity equation. The current density is the amount of current flowing per unit cross-sectional area. The current through a surface can be written as a surface integral of the current density. The conservation of charge says that the total current leaving a volume equals the rate at which charge inside that volume decreases. The total charge can be written using volume charge density, which is a space function. Because of this, the...

boundary conditions for current density

Current Density at Conductivity Boundaries

Current density at a boundary changes when two conducting materials have different electrical conductivities. The normal component of current density stays continuous across the interface. The tangential component, which runs along the surface, becomes discontinuous across the boundary. Consider two conducting media with conductivities σ1 and σ2 separated by an interface. At point P1 in medium 1, the steady current density makes an angle α1 with the normal. At point P2 in medium 2, the current...

electrical conductivity

Resistance and Ohm's Law in Conductors

Resistance and Ohm's law help explain how electric current moves through a conductor. In a perfect conductor, the electric field inside is zero because free electrons move to cancel it. Any extra charge then stays on the surface. In a practical conductor, an applied electric field can remain in place. That field drives electrons through the material and creates a current. The current density, which is current per unit area, is related to the electric field. More generally, it is related to the...

theory of metallic conduction

Electron Drift in Metallic Conduction

Electron drift in metallic conduction explains how free electrons move through a conductor. A classical model can describe this motion closely, even though quantum mechanics gives the best overall picture. This model is called the theory of metallic conduction. In this theory, Newton's second law is used to find the acceleration of an electron when an electric field is applied. The electron's velocity is then found from that acceleration. The electron travels through a crystal of positive ions...

key terms and concepts

Learn how electrical current flows in simple circuits, why amps matter, and how switches, batteries, and schematics show the path for charge.

Current Flow in Simple Circuits | JoVE K12

physics

JoVE Core - Fisica apresenta a teoria e a aplicação de tópicos fundamentais da física, incluindo cinemática, dinâmica, mecânica dos fluidos, estática, ondas e acústica, com vídeos animados concisos e de fácil compreensão. Além disso, os vídeos de cientistas em ação demonstram a aplicação de conceitos relacionados em experimentos de pesquisa clássica e original realizados nos laboratórios de todo o mundo hoje em dia.

PS.PSc.6.3

PS.Phy.4.3

ohios-learning-standards-and-model-curriculum

Ohio’s Learning Standards and Model Curriculum

Energy And Waves

Electricity

Electricity And Magnetism

DC circuits

Tennessee Academic Standards

High School

Energy

PHYS.PS3.11

Virginia  Standards of Learning

HIgh School

PS.9

PS.9.b

PS.9.c

PH.8

PH.8.b

Arizona Science Standards

HS+Phy.P4

HS+Phy.P4U1.8

Alabama Course of Study Science

waves-and-their-applications-in-technologies-for-information-transfer

Waves and Their Applications in Technologies for Information Transfer

9-12.PS.2.3.c

9-12.PS.2.3.d

9-12.P.2.6.b

9-12.P.2.6.d

Next Generation Science Standards

Motion and Stability: Forces and Interactions

HS-PS2-5

Florida Department of Education

SC.912.P.10

SC.912.P.10.15

Texas Essential Knowledge and Skills

PHYS.6

PHYS.6.D

PHYS.6.E

south-carolina-college-and-career-ready-science-standards

South Carolina College and Career Ready Science Standards

P-PS2-5

new-york-state-science-learning-standards

New York State Science Learning Standards

HS. Energy

HS-PS3-6.

Georgia Standards of Excellence

SPS10.

Understanding Electrical Quantities

SP5.

Ohm’s Law

Position and Displacement

The position of an object defines its location relative to a convenient frame of reference at any particular time. A frame of reference is an arbitrary ...

Average Velocity

To calculate the other physical quantities in kinematics, we must introduce the time variable. The time variable allows us not only to state the position ...

Instantaneous Velocity - I

The average velocity during a time interval cannot tell us how fast or in what direction a particle is moving at any given time during the interval. To ...

Instantaneous Velocity - II

Instantaneous velocity is the quantity that measures how fast an object is moving along its path. In other words, the instantaneous velocity of an object ...

Average Acceleration

The importance of understanding acceleration spans our day-to-day experiences, as well as the vast reaches of outer space and the tiny world of subatomic ...

Instantaneous Acceleration

Acceleration is in the direction of the change in velocity, but it is not always in the direction of motion. When an object slows down, its acceleration ...

Position and Displacement Vectors

To describe the motion of an object, one should first be able to describe its position (where it is at any particular time). More precisely, the position ...

average-and-instantaneous-velocity-vectors

Average and Instantaneous Velocity Vectors

To calculate other physical quantities in kinematics, the time variable must be introduced. The time variable not only allows us to state where an object ...

Acceleration Vectors

In everyday conversation, accelerating means speeding up. Acceleration is a vector in the same direction as the change in velocity, &#916;v, therefore the ...

Direction of Acceleration Vectors

Acceleration occurs when velocity changes in magnitude (an increase or decrease in speed), direction, or both. Although acceleration is in the direction ...

Linear Momentum

The term momentum is used in various ways in everyday language, most of which are consistent with the precise scientific definition. Generally, momentum ...

Force and Momentum

Force and momentum are intimately related. Force acting over time can change momentum, and Newton&#39;s second law of motion can be stated in its most ...

Analyze and interpret data to explain the motion of an object moving with a constant velocity or that is accelerating.

PS.PSc.4.1

Electrical current is defined as the rate at which charge flows. When there is a large current present, such as that used to run a refrigerator, a large ...

Drift Velocity

The high speed of electrical signals results from the fact that the force between charges acts rapidly at a distance. Thus, when a free charge is forced ...

Current Density

The total amount of current flowing through one unit value of a cross-sectional area is referred to as current density. If the current flow is uniform, ...

Resistivity

When a voltage is applied to a conductor, an electrical field is generated, and charges in the conductor feel the force due to the electrical field. The ...

Resistance

When a current moves through any conductor, the conductor causes some level of difficulty for the current to flow. The measure of that difficulty is known ...

Ohm's Law

Many materials exhibit a simple relationship between the values of current, voltage, and resistance, known as Ohm&#8217;s law. The current that flows ...

Non-ohmic Devices

In most substances, the current flow is proportional to the voltage applied to it. A simple relationship between the values of current, voltage, and ...

Construct an explanation to compare simple series and parallel circuits in terms of Ohm's Law.

Continuity Equation

The total amount of current flowing per unit cross-sectional area is called the current density. Hence, the current passing through a cross-sectional area ...

Boundary Conditions for Current Density

Current density becomes discontinuous across an interface of materials with different electrical conductivities. The normal component of the current ...

Electrical Conductivity

In perfect conductors, the electric field inside is always zero due to the abundance of free electrons, which nullify any field by flowing. As a result, ...

Theory of Metallic Conduction

The conduction of free electrons inside a conductor is best described by quantum mechanics. However, a classical model makes predictions close to the ...

Obtain, evaluate, and communicate information to explain how current is affected by changes in composition, length, temperature, and diameter of wire.

Magnetism

Magnets are commonly found in everyday objects, such as toys, hangers, elevators, doorbells, and computer devices. Experimentation on these magnets shows ...

Magnetic Fields

A moving charge or a current creates a magnetic field in the surrounding space, in addition to its electric field. The magnetic field exerts a force on ...

Magnetic Field Lines

The representation of magnetic fields by magnetic field lines is very useful in visualizing the strength and direction of the magnetic field. Each of the ...

Magnetic Flux

The magnetic flux measures the number of magnetic field lines passing through a given surface area. The SI unit for magnetic flux is the weber (Wb). ...

motion-of-a-charged-particle-in-a-magnetic-field

Motion Of A Charged Particle In A Magnetic Field

A charged particle experiences a force when moving through a magnetic field. Consider the field to be uniform and the charged particle to move ...

Magnetic Force

In addition to the electric forces between electric charges, moving electric charges exert magnetic forces on each other. A magnetic field is created by a ...

magnetic-force-on-a-current-carrying-conductor

Magnetic Force On A Current-Carrying Conductor

Moving charges experience a force in a magnetic field. Since the magnetic fields produced by moving charges are proportional to the current, a conductor ...

magnetic-force-on-current-carrying-wires-example

Magnetic Force On Current-Carrying Wires: Example

In a magnetic field, moving charges encounter a force. If a wire contains these moving charges, i.e., if the wire is carrying a current, then a force acts ...

force-on-a-current-loop-in-a-magnetic-field

Force On A Current Loop In A Magnetic Field

Magnetic forces on wires carrying current are most frequently applied in motors. A DC motor is a device that converts electrical energy into mechanical ...

torque-on-a-current-loop-in-a-magnetic-field

Torque On A Current Loop In A Magnetic Field

The most common application of magnetic force on current-carrying wires is in electric motors. These consist of loops of wire, which are placed between ...

The Hall Effect

Edwin H. Hall, in the year 1879, devised an experiment that could be used to identify the polarity of the predominant charge carriers in a conducting ...

Magnetic Field due to Moving Charges

A stationary charge creates and interacts with the electric field, while a moving charge creates a magnetic field.
Consider a point charge moving with a ...

Use models to explain magnetism in terms of domains, interactions of poles, and magnetic fields.

PS.PSc.6.4

Analyze motion in terms of speed, velocity, acceleration, and momentum.

Current Flow in Simple Circuits

Description

Transcript

Tags

More videos by Standards