Name: beam deflection from loads and supports
Uploaded: 2024-05-23T13:00:01.000Z
Duration: 1 min 15 s
Channel: JoVE

Um componente crucial no projeto de vigas é a identificação e medição da deflexão. Uma compreensão abrangente das deflexões é necessária ao lidar com vigas indeterminadas.
Considere uma viga saliente que carrega duas cargas concentradas. As reações nos suportes são calculadas analisando o diagrama de corpo livre da viga.
Com o diagrama de corpo livre e os suportes de reação, é construído um diagrama de momento fletor, que descreve como a viga se curva.
O diagrama de momento fletor mostra que a viga se curva para cima entre o início e um ponto específico devido a um momento fletor positivo, e se curva para baixo desse ponto até o final da viga devido a um momento fletor negativo.
O maior valor da curva ou menor raio de curvatura ocorre no suporte onde o momento fletor está em seu ponto mais alto.
Para uma análise detalhada e projeto de uma viga, é crucial ter dados precisos sobre a deflexão e inclinação da viga em vários pontos, com foco especial na compreensão da deflexão máxima.

deformação de uma viga sob efeito de uma carga transversal

Compreender a deflexão de uma viga, especialmente para vigas indeterminadas com segmentos pendentes e múltiplas cargas concentradas, é crucial para garantir a integridade estrutural e a funcionalidade. O processo começa com a construção de um diagrama de corpo livre preciso, que ajuda a identificar as forças e momentos que atuam na viga. Este diagrama é vital para visualizar como os momentos fletores variam ao longo do comprimento da viga, influenciando sua curvatura.

Os insights do diagrama de momento fletor estendem-se para a análise da curvatura da viga. A curvatura da viga se correlaciona com os momentos fletores ao longo da viga e está inversamente relacionada à rigidez e seção transversal da viga. Maiores momentos fletores resultam em maior curvatura, o que é essencial para a compreensão do perfil de deflexão da viga.

Em particular, o foco se concentra na deflexão máxima, pois a deflexão excessiva pode levar a problemas estruturais, ou até mesmo a falhas. Esta deflexão máxima normalmente ocorre onde a curvatura é maior, muitas vezes perto de apoios ou diretamente sob os pontos onde as cargas são aplicadas. Identificar esta deflexão máxima é crucial para garantir que os projetos de vigas cumpram as normas de segurança e os requisitos funcionais. Ao realizar análises minuciosas usando diagramas de corpo livre e momento fletor, é possível projetar efetivamente estruturas que sejam seguras e adequadas para condições de carga e requisitos arquitetônicos específicos.

Deformação de uma Viga Sob Efeito de uma Carga Transversal

Um componente crucial no projeto de vigas é a identificação e medição da deflexão. Uma compreensão abrangente das deflexões é necessária ...

deformation-of-a-beam-under-transverse-loading

Education

JoVE Core

Mechanical Engineering

Engenharia Mecânica

Unit 1

Unidade 1

Deflection of Beams

Deflexão de Vigas

KEY TERMS AND CONCEPTS

TERMOS-CHAVE E CONCEITOS

Deformation of a Beam under Transverse Loading

beam deflection from loads and supports

Beam deflection depends on the loads on a beam and the support conditions at its ends. For indeterminate beams, especially those with overhanging parts and multiple concentrated loads, careful analysis is needed to predict how the beam will bend.

The first step is to draw an accurate free-body diagram. A free-body diagram shows the forces and moments acting on the beam. It helps reveal how the bending moment changes along the beam length.

The bending moment diagram also shows how the beam will curve. Beam curvature is related to the bending moment and is affected by the beam’s stiffness and cross-section. When the bending moment is higher, the curvature is greater, so the deflection profile becomes easier to evaluate.

The main goal is to find the maximum deflection. Too much deflection can cause structural problems or even failure. This largest deflection often appears where curvature is greatest, such as near supports or directly under applied loads. Using free-body and bending moment diagrams helps engineers design beams that stay safe and meet functional requirements under specific loading conditions.

Beam Deflection from Loads and Supports

deformation of a beam under transverse loading

Beam deflection depends on the loads on a beam and the support conditions at its ends. For indeterminate beams, especially those with overhanging parts and multiple concentrated loads, careful analysis is needed to predict how the beam will bend. The first step is to draw an accurate free-body diagram. A free-body diagram shows the forces and moments acting on the beam. It helps reveal how the bending moment changes along the beam length. The bending moment diagram also shows how the beam...

equation of the elastic curve

Beam Deflection and Boundary Conditions

Beam deflection and boundary conditions help describe how a beam bends under load. In structural engineering, the curvature of a plane curve shows how sharply the beam bends. That curvature is found from the curve’s first and second derivatives. A cantilever beam with a point load at its free end is a common example. A diving board works like this type of beam. When slopes are small, the beam’s elastic curve becomes the main shape used in the analysis. The governing equation connects bending...

elastic curve from the load distribution

Beam Deflection Under Distributed Load

Beam deflection under distributed load is a key part of beam analysis in engineering. It helps predict how a beam bends and reacts when a load is spread along its length. Engineers use this relationship to judge whether a structure will stay safe and functional. The analysis starts with the link between load, shear force, and bending moment. These quantities can be written in differential form. When beam flexibility is treated as constant, further differentiation leads to a higher-order...

deflection of a beam

Beam Slope and Deflection by Singularity

Beam slope and deflection can be found with singularity functions when beam loading is hard to write as one simple equation. This method is useful in structural engineering because it helps describe beams under several loads without breaking the problem into many separate cases. Singularity functions are mathematical tools for showing discontinuities in a load, shear force, or bending moment equation. They are especially helpful when a load acts at a single point or over a set interval. In the...

method of superposition

Beam Deflection Under Combined Loads

Beam deflection under combined loads can be found with the method of superposition. This structural engineering method is used to analyze how multiple loads affect a beam. It works by finding the slope and deflection from each load separately, then adding those results together. The method applies only when the beam stays within its elastic limit. In that range, the material deforms in a linearly elastic way. That makes it valid to combine the effects of separate loads without changing the...

moment-area theorems

Beam Deflection Using Moment-Area Rules

The moment-area theorems help describe beam bending in structural engineering. They are often used for building floor supports and other beams under load. The theorems use the elastic curve, which is the shape a beam takes as it deforms. The first theorem links slope change to area on an M/EI diagram. Here, M is the bending moment, E is the modulus of elasticity, and I is the moment of inertia. When M/EI is plotted along the beam length, the area under the curve gives the total rotation...

beams with symmetric loadings

Moment-Area Method for Cantilever Deflection

The moment-area method is used in structural engineering to find the slope and deflection of a beam under load. It is especially useful for a cantilever beam with a concentrated load and a moment at the free end. The analysis begins with a free-body diagram. This diagram helps calculate the reactions at the fixed end. After that, the bending moment diagram is drawn to show how the bending moment changes along the beam. Points where the bending moment is zero are important in this step. Next,...

beams with unsymmetric loadings

Beam Deflection and Level Points

Beam deflection and level points can be found for a supported beam under unsymmetrical loadings using moment-area theorems. This type of analysis helps show how a beam bends when forces are spread unevenly along it. It is an important part of structural engineering because it links load patterns to beam response. The first moment-area theorem is used to find the slope at any point on the beam. It states that the change in slope between two points equals the area under the moment diagram over...

maximum deflection

Locating the Beam’s Highest Deflection

Maximum deflection in a supported beam depends on where the load is placed. With an unsymmetrical load, such as a train moving across a bridge, the beam may bend most at a point that is not the midpoint. Finding that point is important for judging stress and deflection in the structure. The point of maximum deflection is called point O. At point O, the tangent to the deflection curve is horizontal. That means the slope is zero there. To locate point O, the slope at any point X along the beam...

key terms and concepts

Learn how free-body diagrams and bending moment diagrams help predict beam deflection, identify maximum deflection, and check structural safety under load.

Beam Deflection from Loads and Supports | JoVE K12

O JoVE Core Mechanical Engineering oferece vídeos animados concisos e de fácil compreensão que abrangem tópicos-chave como equilíbrio, forças, análise de treliças e mecânica estrutural. Explore suas aplicações no mundo real e observe esses conceitos em ação por meio de experimentos conduzidos por cientistas.

mechanical engineering

Beam Deflection from Loads and Supports

Description

Transcript

Tags