Name: heat transfer and specific heat
Uploaded: 2025-06-17T07:55:58.000Z
Duration: 2 min 46 s
Channel: JoVE

K12 Standards

north-carolina-k-12-science-standard-course-of-study

North Carolina K-12 Science Standard Course of Study

9-12

Chemistry

Energy

PS.Chm.7.2

Quantifying Heat

Внутренняя энергия определяется взаимным преобразованием тепла и работы. Но как измерить тепло? Каждое вещество обладает тепловой энергией.Когда система испытывает разницу температур с окружающей средой, тепловая энергия перетекает от вещества с более высокой температурой к веществу с более низкой температурой. Эта передача тепловой энергии также называется переносом тепла и измеряется в джоулях. С другой стороны, температура описывает свойство тепловой энергии и измеряется в градусах Цельсия или Кельвинах.Таким образом, температура не зависит от вещества, в отличие от теплоты, которая зависит от количества и типа молекул в системе. Теплота может быть измерена методом калориметрии, который использует соотношение между теплотой и изменением температуры системы. Когда кусок железа с температурой 114 градусов Цельсия помещается в воду комнатной температуры, тепло течет от железа к воде, пока они не достигнут одинаковой температуры.Когда чистый поток тепла отсутствует, они находятся в тепловом равновесии. В изолированной системе вода получает ровно столько тепла, сколько теряет железо. Однако конечная температура всего на один градус выше начальной температуры воды, в то время как железо остыло на 93 градуса Цельсия.Количество переданного тепла пропорционально дельте изменения температуры T.Константа пропорциональности C или теплоемкость"это количество тепла, необходимое для повышения температуры системы на один Кельвин или один градус Цельсия. Теплоемкость зависит от типа вещества:системе с большой теплоемкостью, такой как вода, необходимо поглощать больше тепла для повышения своей температуры, чем системе с меньшей теплоемкостью, такой как железо. Теплоемкость также зависит от массы вещества.Удельная теплоемкость Cs или молярная теплоемкость Cm описывает количество тепла, необходимое для увеличения температуры 1 грамма или 1 моля вещества на 1 градус Цельсия. Таким образом, единица измерения выражается либо в джоулях на грамм градус Цельсия, либо в джоулях на моль градус Цельсия. Так, если известны удельная теплоемкость и изменение температуры системы, теплоту можно рассчитать по их произведению.

Количественная оценка тепла

<h4>Тепловая энергия  </h4>
 
 В микроскопическом режиме тепловая энергия — это кинетическая энергия, связанная с случайным движением атомов и молекул. Температура является количественной мерой “горячей” или “холодной”, которая зависит от количества тепловой энергии. Когда атомы и молекулы в объекте движутся или вибрируют быстро, они обладают более высокой средней кинетической энергией (KE) (или более высокой тепловой энергией), и объект воспринимается как “горячий”, или он описывается как находящийся при более высокой температуре. Когда атомы и молекулы движутся медленно, они имеют более низкую среднюю энергию KE (или более низкую тепловую), и объект воспринимается как “холодный”, или он описывается как находящийся при более низкой температуре.  
 
 Если предположить, что химическая реакция или изменение фазы (например, таяние или испарение) не произойдет, увеличение тепловой энергии в образце вещества приведет к повышению температуры, а уменьшение тепловой энергии в образце вещества приведет к снижению температуры. 
 
 <h4>Тепло </h4>
 
 Тепло (q) — это передача тепловой энергии между двумя телами при различных температурах. Теплопоток увеличивает тепловую энергию одного тела и уменьшает тепловую энергию другого. Тепло спонтанно течет из горячего в холодный (т.е. только в одном направлении) и продолжается до тех пор, пока два вещества не нагреются до одинаковой температуры. Изменения температуры измеряются путем изменения температуры.  
 
 Единица измерения температуры, работы и энергии СИ — джоуль. Джоуль (J) определяется как количество энергии, используемое при перемещении объекта силой 1 ньютон на 1 метр. Назван в честь английского физика Джеймса Прескотта Джоуля. Один джоуль эквивалентен 1 кг м2/с2, что также называется 1 ньютон-метр. Одна киложуле (кДж) — 1000 джоулей. Для стандартизации определения одной калории установлено, что она равна 4.184 джоулей. 
 
 <h4>Передача тепловой энергии </h4>
 
 Теплоемкость (C) тела вещества - это количество тепла (q), которое он поглощает или высвобождает при изменении температуры (ΔT) на 1 градусов C (или эквивалентно 1 кельвинов): 
 
 <img alt=""Eq1"" src=""https://www.jove.com/files/core/CDNSource/lessons/794/794_Equations-01.png"" style=""height: 40px;"" />
 
 Теплоемкость определяется как типом, так и количеством вещества, поглощающего или выделющего тепло. Поэтому теплоемкость является обширным свойством — ее стоимость пропорциональна количеству вещества. Например, учитывайте теплоемкость двух чугунных сковород. Теплоемкость большой сковомоль в пять раз превышает тепловую емкость небольшой сковомоль, поскольку, хотя и обе пэны изготовлены из одного материала, масса большой сковомоль в пять раз превышает массу небольшой сковомоль. Чем больше масса, тем больше атомов присутствует в большом панорамировании, поэтому требуется больше энергии, чтобы все атомы стали вибрировать быстрее. Теплоемкость маленькой чугунной сковородки определяется тем, что для повышения температуры сковомоль на 50.0 °C (ΔT) требуется 18,140 Дж энергии (q): 
 
 <img alt=""Eq1"" src=""https://www.jove.com/files/core/CDNSource/lessons/794/794_Equations-02.png"" style=""height: 40px;"" />
 
 Большая чугунная сковородка, изготовленная из того же вещества, требует 90,700 Дж энергии (q) для повышения температуры на 50.0 °C (ΔT). Более крупный противень обладает (пропорционально) большей теплоемкостью, поскольку для получения такого же изменения температуры требуется (пропорционально) больший объем энергии: 
 
 <img alt=""Eq1"" src=""https://www.jove.com/files/core/CDNSource/lessons/794/794_Equations-03.png"" style=""height: 40px;"" />
 
 Удовая теплоемкость (c) вещества, которое обычно называется «удовым теплом», представляет собой количество тепла, необходимое для повышения температуры 1 грамм вещества на 1 градусов Цельсия (или 1 кельвина):  
 
 <img alt=""Eq1"" src=""https://www.jove.com/files/core/CDNSource/lessons/794/794_Equations-04.png"" style=""height: 40px;"" />
 
 Удовая теплоемкость зависит только от типа вещества, поглощающего или выделящего тепло. Это интенсивное свойство, поэтому оно не зависит от количества вещества. Например, небольшая чугунная сковородка имеет массу 808 г. Удовое тепло железа (материал, используемый для изготовления посуды) составляет, таким образом: 
 
 <img alt=""Eq1"" src=""https://www.jove.com/files/core/CDNSource/lessons/794/794_Equations-05.png"" style=""height: 40px;"" />
 
 Большая сковорода имеет массу 4040 г. Используя данные для этого поддона, мы также можем рассчитать удовую температуру утюга:  
 
 <img alt="Eq1" src="https://www.jove.com/files/core/CDNSource/lessons/794/794_Equations-06.png" style="height: 40px;" />
 
 Несмотря на то, что большая сковороду более массивна, чем маленькая, так как обе сделаны из одного материала, они оба дают одинаковое значение для конкретного тепла (для материала конструкции, железа). Обратите внимание, что удовое тепло измеряется в единицах энергии на температуру на массу и является интенсивным свойством, производным от соотношения двух обширных свойств (тепло и масса). Теплоемкость молярного вещества, также является интенсивным свойством, это теплоемкость на единицу моль конкретного вещества и имеет единицы J/mol⋅°C. 
 
 Вода имеет относительно высокую удельную температуру (около 4.2 Дж/г⋅°C для жидкости и 2.09 Дж/г⋅°C для твердого тела); большинство металлов имеют гораздо более низкие удельные нагреватели (обычно менее 1 Дж/г⋅°C). Зная массу (м) вещества и его удовую температуру (с), можно определить количество тепла, q, введение или выход из вещества путем измерения изменения температуры (ΔT) до и после получения или потери тепла:  
 
 <img alt="Eq7" src="https://www.jove.com/files/core/CDNSource/lessons/794/794_Equations-07v3.png" style="height: 20px;" />
 
 <img alt="Eq8" src="https://www.jove.com/files/core/CDNSource/lessons/794/794_Equations-08v4.png" style="height: 20px;" />
 
 Если вещество получает тепловую энергию, температура повышается, конечная температура превышает начальную температуру, TFinal - Tinitial имеет положительное значение, а значение q положительное. Если вещество теряет тепловую энергию, температура снижается, конечная температура ниже начальной, TFinal - Tinial имеет отрицательное значение, а значение q - отрицательное. 
 
 Обратите внимание, что зависимость между теплом, удельной теплоёмкостью, массой и изменением температуры может быть использована для определения любого из этих величин (не только тепла), если остальные три известны или могут быть выведены. 
 
 Этот текст был адаптирован из <a href="https://openstax.org/books/chemistry-2e/pages/5-1-energy-basics">OpenStax Химия 2е изд., раздел 5.1: Основы энергетики</a> и <a href="https://openstax.org/books/chemistry-2e/pages/5-3-enthalpy">OpenStax Химия 2е изд., раздел 5.3: Энтальпия</a>.

Тепловая энергия 

С микроскопической точки зрения, тепловая энергия — это кинетическая энергия, связанная со случайным движением атомов и молекул. Температура ...

Education

JoVE Core

Химия

Один

Thermochemistry

Термохимия

KEY TERMS AND CONCEPTS

ОСНОВНЫЕ ТЕРМИНЫ И ПОНЯТИЯ

heat transfer and specific heat

Heat transfer and specific heat explain how thermal energy moves and how materials respond to it. Thermal energy is the kinetic energy linked to the random motion of atoms and molecules. Temperature is a measure of how hot or cold a substance is, and it depends on how much thermal energy those particles have.

When atoms and molecules move or vibrate faster, their average kinetic energy is higher. That means the object has more thermal energy and a higher temperature. When they move more slowly, the thermal energy is lower and the temperature drops. If no chemical reaction or phase change, such as melting or vaporizing, occurs, adding thermal energy raises temperature and removing it lowers temperature.

Heat, written as q, is the transfer of thermal energy between two bodies at different temperatures. Heat flow increases the thermal energy of one body and decreases the thermal energy of the other. It moves spontaneously from hot to cold and continues until both substances reach the same temperature. Changes in heat are tracked by changes in temperature.

The SI unit for heat, work, and energy is the joule. One joule is the energy used when a force of 1 newton moves an object 1 meter. It is also equal to 1 kg m^2/s^2, or 1 newton-meter. A kilojoule is 1000 joules, and one calorie is defined as 4.184 joules.

Heat capacity, C, tells how much heat a body absorbs or releases when its temperature changes by 1 degree C, or 1 kelvin. It depends on both the type of substance and the amount present, so it is an extensive property. A large cast iron frying pan has a heat capacity five times greater than a small one because it has five times more mass. More mass means more atoms, so more energy is needed to make all of them vibrate faster.

The small cast iron frying pan in the example takes 18,140 J of energy to rise by 50.0 °C. The larger pan needs 90,700 J to rise by the same amount. Even though both pans are made of the same material, the larger one needs proportionally more energy because it contains more matter.

Specific heat capacity, often called specific heat, is the heat needed to raise 1 gram of a substance by 1 degree Celsius, or 1 kelvin. It depends only on the kind of substance, so it is an intensive property. Using the mass and temperature change of the small pan, the specific heat of iron can be calculated. The large pan gives the same result, even though its mass is greater.

Specific heat is measured in units of energy per temperature per mass. Because it is a ratio of heat and mass, it is intensive even though those two quantities are extensive. The molar heat capacity is another intensive property. It is the heat capacity per mole of a substance and has units of J/mol·°C.

Water has a relatively high specific heat, about 4.2 J/g·°C for liquid water and 2.09 J/g·°C for solid water. Most metals have much lower specific heats, usually less than 1 J/g·°C. If the mass of a substance, its specific heat, and its temperature change are known, the amount of heat entering or leaving it can be found. A positive q means thermal energy is gained and temperature rises. A negative q means thermal energy is lost and temperature falls.

Heat Transfer and Specific Heat

energy basics

How Energy Changes in Chemical Reactions

Chemical reactions change matter and energy at the same time. A match lighting is a simple example. These energy changes are part of everyday life and appear in food, fuels, and industry. Food provides energy through metabolic reactions. The macronutrients in food break down and help keep the body functioning. Fuels such as gasoline, natural gas, and coal are burned to produce energy for transportation, heating, and electricity generation. Industrial chemical reactions also use large amounts...

first law of thermodynamics

Energy Conservation and Internal Energy

Energy conservation describes how energy changes form during chemical and physical changes. Energy can be converted from one form into another, but the energy present before a change still exists in some form after the change is complete. This is the law of conservation of energy. It says energy can neither be created nor destroyed. The law of conservation of matter also applies during chemical change. In most chemical reactions, the total amount of matter does not show a detectable change.

internal energy

Internal Energy, Heat, and Work

Internal energy is the total of all possible kinds of energy in a substance. It is often written as U, and sometimes as E. For a system that changes energy, the important value is the change in internal energy, or ΔU. ΔU is the difference between the final internal energy and the initial internal energy. The exact values of U final and U initial are usually not known, but the first law of thermodynamics only requires ΔU. A positive ΔU means the system gained energy from the surroundings. A...

quantifying heat

Heat transfer and specific heat explain how thermal energy moves and how materials respond to it. Thermal energy is the kinetic energy linked to the random motion of atoms and molecules. Temperature is a measure of how hot or cold a substance is, and it depends on how much thermal energy those particles have. When atoms and molecules move or vibrate faster, their average kinetic energy is higher. That means the object has more thermal energy and a higher temperature. When they move more...

quantifying work

Pressure-Volume Work in Chemistry

Pressure-volume work shows how gas volume changes can transfer energy in chemistry. As a system changes, its internal energy may change too. Energy can move between the system and the surroundings through heat and work. Internal energy, heat, and work are related by an energy equation. Heat depends on a measured temperature change. Work depends on a measured change in volume called pressure-volume work. Work can be defined as a force acting through a distance. Pressure-volume work, also...

enthalpy

Enthalpy and Heat at Constant Pressure

Enthalpy describes heat changes in chemical and physical processes. Chemists use the symbol H for enthalpy. It is defined as a system’s internal energy, E, plus the product of pressure, P, and volume, V. Enthalpy is a state function, so only changes in enthalpy can be measured, not the enthalpy of a substance by itself. For many reactions, the pressure stays constant. Under those conditions, the enthalpy change, ΔH, can be written in a way that includes pressure-volume work. The term PΔV...

thermochemical equations

Heat Changes in Chemical Equations

Heat changes in chemical equations show how much energy a reaction releases or absorbs. At constant pressure, the enthalpy of reaction, or ΔHrxn, is equal to the heat exchanged with the surroundings, qp. Because this value depends on how much reactant takes part, it is an extensive property. The size and sign of ΔHrxn also depend on the reaction itself and on the physical states of the substances involved. An exothermic reaction has a negative ΔHrxn value, while an endothermic reaction has a...

constant pressure calorimetry

Coffee Cup Calorimeter Heat Changes

Coffee cup calorimetry measures heat changes in reactions and physical changes using an insulated calorimeter. The calorimeter is calibrated and designed to limit heat exchange with the outside environment. That makes it possible to measure the heat taken in or released by a substance more accurately, including the energy content of foods. In calorimetry, the system is the substance or substances undergoing change. The surroundings are everything else inside the calorimeter, including the...

constant volume calorimetry

Bomb Calorimeter Heat Measurement

Bomb calorimetry measures the heat released by reactions that produce a lot of energy, especially combustion reactions. A coffee cup calorimeter works at constant pressure and is useful for reactions in solution. A bomb calorimeter works at constant volume and is used for reactions that make large amounts of heat and gaseous products. The word "bomb" refers to the strong, explosive force some reactions can have. In a bomb calorimeter, the volume does not change, so 94V = 0. That means the...

hess's law

Calculating Reaction Heat with Hess's Law

Calculating reaction heat with Hess's law lets chemists find enthalpy changes without measuring every reaction directly. Some reactions are hard or impossible to test in the lab. Even when a reaction can be measured, it is often easier to calculate the heat change from other known enthalpy values. Hess's law says that if a process can be written as the sum of several stepwise processes, the enthalpy change for the total process equals the sum of the enthalpy changes for the steps. This works...

standard enthalpy of formation

Using Standard Enthalpy Values in Chemistry

Enthalpy changes are often listed for reactions that start and end under the same conditions. Chemists use a standard state as a reference set of conditions for comparing properties. In IUPAC terms, the standard state means 1 bar of pressure and 1 M solutions, but it does not set a temperature. Many thermochemical tables still use 1 atm as the reference pressure. Because the difference between 1 bar and 1 atm is very small, enthalpy change usually stays almost the same. A superscripted o in...

enthalpies of reaction

Calculating reaction heat with Hess's law uses standard enthalpies of formation to find the enthalpy change of a reaction. When the formation values for the reactants and products are known, the overall reaction can be broken into simpler stepwise reactions. This approach helps show how the heat change for the full reaction is built from smaller parts. First, the reactants are thought of as being decomposed into their component elements. The enthalpy change for this step is proportional to the...

key terms and concepts

Learn how heat moves between objects, why temperature changes, and how heat capacity and specific heat help measure thermal energy in materials.

Heat Transfer and Specific Heat | JoVE K12

chemistry

JoVE Core Chemistry brings general chemistry concepts to life using concise and easy-to-understand animated video lessons. Plus, in the scientist-in-action videos, we demonstrate classical and original research experiments performed in today's laboratories worldwide.

Matter and its Interactions

PS.Chm.4.1

Louisiana Student Standards for Science

High School

HS-PS3-3

ohios-learning-standards-and-model-curriculum

Ohio’s Learning Standards and Model Curriculum

Physical Science

Energy And Waves

transfer-and-transformation-of-energy-including-work

Transfer and transformation of energy (including work)

Interactions Of Matter

Chemical reactions

Tennessee Academic Standards

Physics

PHYS.PS3.3

PHYS.PS3.7

CHEM1.PS3.1

CHEM1.PS3.2

Virginia  Standards of Learning

HIgh School

CH.7

CH.7.a

Texas Essential Knowledge and Skills

CHEM.13

CHEM.13.A

CHEM.13.C

CHEM.13.D

Alabama Course of Study Science

9-12.PS.1.1.c

Earth and Space Science

Earth's Place in the Universe

9-12.ESS.1.2.e

Earth's Systems

9-12.ESS.2.7.b

south-carolina-college-and-career-ready-science-standards

South Carolina College and Career Ready Science Standards

P-PS3-1

P-PS3-2

P-PS3-3

new-york-state-science-learning-standards

New York State Science Learning Standards

HS. Energy

HS-PS3-3.

Georgia Standards of Excellence

SPS7.

Modes of Heat Transfer

Classifying Matter by State

Chemistry is the study of matter and the changes it undergoes. Matter is anything that has mass and occupies space. Matter is all around us; the air, ...

Classifying Matter by Composition

Matter: Pure Substances and Mixtures
According to its composition, the matter can be classified into two broad categories &mdash; pure substances and ...

physical-and-chemical-properties-of-matter

Physical and Chemical Properties of Matter

The characteristics that enable us to distinguish one substance from another are called properties.

Physical Properties of Matter

A physical property is ...

molecular-comparison-of-gases-liquids-and-solids

Molecular Comparison of Gases, Liquids, and Solids

Particles in a solid are tightly packed together (fixed shape) and often arranged in a regular pattern; in a liquid, they are close together with no ...

Intermolecular vs Intramolecular Forces

Intermolecular forces (IMF) are electrostatic attractions arising from charge-charge interactions between molecules. The strength of the intermolecular ...

Intermolecular Forces

Atoms and molecules interact through bonds (or forces): intramolecular and intermolecular. The forces are electrostatic as they arise from interactions ...

comparing-intermolecular-forces-melting-point-boiling-point

Comparing Intermolecular Forces: Melting Point, Boiling Point, and Miscibility

Intermolecular forces are attractive forces that exist between molecules. They dictate several bulk properties, such as melting points, boiling points, ...

surface-tension-capillary-action-and-viscosity

Surface Tension, Capillary Action, and Viscosity

Surface Tension
The various IMFs between identical molecules of a substance are examples of cohesive forces. The molecules within a liquid are surrounded ...

States of Matter and Phase Changes

The internal energy of a substance&#8212;the total kinetic energy of all its molecules and the potential energy of their associated forces&#8212;depends ...

Phase Transitions

Whether solid, liquid, or gas, a substance&#39;s state depends on the order and arrangement of its particles (atoms, molecules, or ions). Particles in the ...

phase-transitions-vaporization-and-condensation

Phase Transitions: Vaporization and Condensation

The physical form of a substance changes on changing its temperature. For example, raising the temperature of a liquid causes the liquid to vaporize ...

Vapor Pressure

When a liquid vaporizes in a closed container, gas molecules cannot escape. As these gas phase molecules move randomly about, they will occasionally ...

Clausius-Clapeyron Equation

The equilibrium between a liquid and its vapor depends on the temperature of the system; a rise in temperature causes a corresponding rise in the vapor ...

Phase Transitions: Melting and Freezing

Heating a crystalline solid increases the average energy of its atoms, molecules, or ions, and the solid gets hotter. At some point, the added energy ...

phase-transitions-sublimation-and-deposition

Phase Transitions: Sublimation and Deposition

Some solids can transition directly into the gaseous state, bypassing the liquid state, via a process known as sublimation. At room temperature and ...

Heating and Cooling Curves

When a substance&#8212;isolated from its environment&#8212;is subjected to heat changes, corresponding changes in temperature and phase of the substance ...

Phase Diagrams

A phase diagram combines plots of pressure versus temperature for the liquid-gas, solid-liquid, and solid-gas phase-transition equilibria of a substance. ...

Use models to explain how changes in energy affect the arrangement and movement of the particles in solids, liquids, and gases, as well as the relative strengths of their intermolecular forces.

PS.Chm.7.1

Energy Basics

Chemical reactions, such as those that occur when you light a match, involve changes in energy as well as matter.

Chemical changes and their accompanying ...

First Law of Thermodynamics

Energy Conservation

Energy can be converted from one form into another, but all of the energy present before a change occurs always exists in some form ...

Internal Energy

The total of all possible kinds of energy present in a substance is called the internal energy (U), sometimes symbolized as E. Suppose a system with ...

Thermal Energy&#160;

Microscopically, thermal energy is the kinetic energy associated with the random motion of atoms and molecules. Temperature is a ...

Quantifying Work

As a system undergoes a change, its internal energy can change, and energy can be transferred from the system to the surroundings, or from the ...

Enthalpy

Chemists ordinarily use a property known as enthalpy (H) to describe the thermodynamics of chemical and physical processes. Enthalpy is defined as the sum ...

Thermochemical Equations

For a chemical reaction (the system) carried out at constant pressure &ndash; with the only work done caused by expansion or contraction &ndash; the ...

Constant Pressure Calorimetry

Calorimetry is a technique used to measure the amount of heat involved in a chemical or physical process or to measure the heat transferred to or from a ...

Constant Volume Calorimetry

Calorimeters are useful to determine the heat released or absorbed by a chemical reaction. Coffee cup calorimeters are designed to operate at constant ...

using-differential-scanning-calorimetry-to-measure-changes-in-enthalpy

Using Differential Scanning Calorimetry to Measure Changes in Enthalpy

Source: Laboratory of Dr. Terry Tritt &#8212; Clemson University
Differential Scanning Calorimetry (DSC) is a method of thermodynamic analysis based on ...

Hess's Law

There are two ways to determine the amount of heat involved in a chemical change: measure it experimentally, or calculate it from other experimentally ...

Standard Enthalpy of Formation

Enthalpy changes are typically tabulated for reactions in which both the reactants and products are at the same conditions. A standard state is a commonly ...

Enthalpies of Reaction

Hess&rsquo;s law can be used to determine the enthalpy change of any reaction if the corresponding enthalpies of formation of the reactants and products ...

Use mathematics and computational thinking to execute simple calorimetric calculations based on the Law of Conservation of Energy.

definition-measurement-pressure-atmospheric-pressure-barometer

Definition and Measurement of Pressure: Atmospheric Pressure, Barometer, and Manometer

Gas pressure is caused by force exerted by gas molecules colliding with the surfaces of objects. Although the force of each collision is very small, any ...

gas-laws-boyle-s-gay-lussac-charles-avogadro-s-and-ideal-gas-law

Gas Laws: Boyle's, Gay-Lussac, Charles', Avogadro's, and Ideal Gas Law

Through experiments, scientists established the mathematical relationships between pairs of variables, such as pressure and temperature, pressure and ...

applications-of-the-ideal-gas-law-molar-mass-density-and-volume

Applications of the Ideal Gas Law: Molar Mass, Density, and Volume

The volume occupied by one mole of a substance is its molar volume. The ideal gas law, PV = nRT, &nbsp;suggests that the volume of a given quantity of gas ...

mixtures-of-gases-dalton-s-law-of-partial-pressures-and-mole-fractions

Mixtures of Gases: Dalton's Law of Partial Pressures and Mole Fractions

Unless individual gases chemically react with each other, the individual gases in a mixture of gases do not affect each other&rsquo;s pressure. Each gas ...

chemical-stoichiometry-gases-using-ideal-gas-law-to-determine

Chemical Stoichiometry and Gases: Using Ideal Gas Law to Determine Moles

Chemical stoichiometry describes the quantitative relationships between reactants and products in chemical reactions.

In addition to measuring quantities ...

basic-postulates-kinetic-molecular-theory-particle-size-energy

Basic Postulates of Kinetic Molecular Theory: Particle Size, Energy, and Collision

The ideal-gas equation, which is empirical, describes the behavior of gases by establishing relationships between their macroscopic properties. For ...

kinetic-molecular-theory-gas-laws-explain-properties-gas

Kinetic Molecular Theory and Gas Laws Explain Properties of Gas Molecules

The test of the kinetic molecular theory (KMT) and its postulates is its ability to explain and describe the behavior of a gas. The various gas laws ...

kinetic-molecular-theory-molecular-velocities-temperature-kinetic

Kinetic Molecular Theory: Molecular Velocities, Temperature, and Kinetic Energy

The kinetic molecular theory qualitatively explains the behaviors described by the various gas laws. The postulates of this theory may be applied in a ...

Use mathematics and computational thinking to explain the relationships among pressure, temperature, volume, and quantity of gas, both qualitatively and quantitatively.

PS.Chm.7.3

Understand the relationship among pressure, temperature, volume, and phase.

Heat Transfer and Specific Heat

Description

Transcript

More videos by Standards