Name: states of matter and their properties
Uploaded: 2020-09-03T13:38:25.000Z
Duration: 2 min 49 s
Channel: JoVE

K12 Standards

north-carolina-k-12-science-standard-course-of-study

North Carolina K-12 Science Standard Course of Study

9-12

Chemistry

Energy

PS.Chm.7.1

Classifying Matter by State

Matter is anything that has mass and occupies space. Everything around us is matter, including our bodies, the air we breathe, and the ground we walk on.

Matter exists in three main forms &mdash; solid, liquid, and gas. Scientists have also identified a fourth fundamental state of matter &mdash;&nbsp;plasma.&nbsp;

Solids have a definite shape and volume. For example, take ice cubes in a glass. The ice cubes have a rigid shape, do not flow, and cannot be compressed.&nbsp;This rigidity is maintained because the particles in the ice are arranged close to each other, with strong interparticle forces holding them in place. These particles vibrate only slightly at their otherwise fixed positions, giving them fixed shape and volume.&nbsp;

Liquids, on the other hand, have a fixed volume, but no definite shape. If the same amount of water is placed into another container, its shape will vary according to the container, unlike the ice cube. Like solids, liquids too cannot be compressed. Their particles are still close together but the interparticle forces in a liquid are weaker than in solids, meaning the particles are freer to move and slide past over each other. This gives liquids their fluidity.

Gases have no fixed shape or volume. Gases take the shape and volume of their container. For example, imagine air from a cylinder inflating a balloon.&nbsp;In a gas, the particles are very loosely held together, with little to almost no interparticle forces. As a result, they have freedom of shape and volume, can move rapidly, and are less dense than both solids and liquids.

Gases are highly compressible, due to the large empty spaces between their particles, meaning they can be confined inside a tiny balloon, or expanded to occupy a large room.

Plasma is the fourth state of matter &mdash; produced when gas gets heated to very high temperatures. It is comprised of electrically charged particles. Plasmas make up the interior of stars, auroras surrounding the poles, and fluorescent light bulbs.

The different types of matter are also capable of transitioning from one state to another,&nbsp;typically triggered by changes in temperature or pressure or both. For example, upon heating, solid ice melts to become liquid water. With further heating, water changes into a vapor. With cooling, these state changes can be reversed.&nbsp;

classifying matter by state

Chemistry is the study of matter and the changes it undergoes. Matter is anything that has mass and occupies space. Matter is all around us; the air, water, soil, mountains, even our bodies are all examples of matter. Matter is divided into three states &mdash; solid, liquid, and gas &mdash; that are commonly found on earth. The fourth state of matter, plasma, occurs naturally in the interiors of stars.&nbsp;

Solids are characterized by a definite shape and volume. In a solid, the particles (atoms or molecules) pack very closely and are held together tightly by strong forces, with very little freedom of motion. The particles vibrate, only slightly, in their otherwise fixed positions. This makes solids incompressible. Ice, aluminum, and gold are examples of solids.

Liquids have a definite volume but no definite shape; they take the shape of their container. In a liquid, although the particles are closely spaced, the interparticle forces are weaker than solids. The particles vibrate and move past one another. Thus, a liquid, though incompressible, flows and can be poured easily. Water, alcohol, and oil are all liquids.

Gases have no fixed volume or shape. They conform to the volume and shape of their container. In a gas, the particles are widely separated with much weaker (or almost negligible) interparticle forces. The particles are free to move relative to one another, making gases highly compressible. Thus, unlike solids or liquids, a gas can be compressed to occupy a smaller volume, or it can expand to occupy a larger space. Substances that are gases at room temperature include helium, oxygen, nitrogen, and carbon dioxide.

<h4>Plasma&nbsp;</h4>

The fourth state of matter, plasma, has evolved from the gaseous state and contains appreciable numbers of electrically charged particles. &nbsp;Like gases, plasmas have no fixed shape or volume, and they are less dense than solids or liquids. The interiors of the stars, lightning strikes, auroras that surround the poles, the tail of a comet, plasma TV screens, fluorescent light bulbs, and neon signs are all examples of plasmas. &nbsp;

<h4>Physical Changes: Transitioning From One State of Matter Into Another</h4>

Changes in temperature and/or pressure can lead to a conversion from one state of matter to another. This is illustrated by familiar processes such as the melting of ice or evaporation of water. For example, upon heating, solid ice melts to liquid water. Further heating will convert the water into gaseous vapors. Cooling reverses these processes.

This text is adapted from <a href="https://openstax.org/books/chemistry-2e/pages/1-2-phases-and-classification-of-matter">Openstax, Chemistry 2e, Section 1.2: Phases and Classification of Matter.</a>

Chemistry is the study of matter and the changes it undergoes. Matter is anything that has mass and occupies space. Matter is all around us; the air, ...

Education

JoVE Core

Introduction: Matter and Measurement

KEY TERMS AND CONCEPTS

states of matter and their properties

States of matter help describe how matter behaves in chemistry. Matter is anything that has mass and takes up space. It is found everywhere, including air, water, soil, mountains, and even our bodies.

The three common states on Earth are solid, liquid, and gas. A solid has a definite shape and a definite volume. Its particles, such as atoms or molecules, are packed very closely together and held in place by strong forces, so they only vibrate slightly. This tight arrangement makes solids incompressible. Ice, aluminum, and gold are examples of solids.

A liquid has a definite volume but no definite shape. It takes the shape of its container. Its particles are still close together, but the forces between them are weaker than in solids. The particles can move past one another, so liquids flow and can be poured. Water, alcohol, and oil are all liquids.

A gas has no fixed shape or volume. It fills the shape and volume of its container. Gas particles are far apart and experience much weaker, or almost negligible, forces between them. They move freely, which makes gases highly compressible. Unlike solids or liquids, a gas can be compressed into a smaller space or expand to fill a larger one. Helium, oxygen, nitrogen, and carbon dioxide are gases at room temperature.

Plasma is the fourth state of matter. It forms from a gas and contains many electrically charged particles. Like gases, plasmas have no fixed shape or volume, and they are less dense than solids or liquids. Examples include the interiors of stars, lightning strikes, auroras near the poles, comet tails, plasma TV screens, fluorescent light bulbs, and neon signs.

Changes in temperature or pressure can move matter from one state to another. Heating ice can melt it into liquid water. More heating can turn the water into water vapor. Cooling reverses these changes.

States of Matter and Their Properties

scientific laws and theories

How Science Explains Laws and Theories

Scientific laws and scientific theories describe science in two different ways. A law is a concise verbal or mathematical statement that summarizes many experimental observations. It describes or predicts aspects of the natural world that stay the same under the same conditions. A scientific theory is different because it explains why natural events happen. It is a unifying principle that gives a well-supported and testable explanation for a broad set of observations. Strong theories are the...

the scientific method

How Scientists Test a Hypothesis

Chemistry uses the scientific method to turn observations into testable answers. Scientists begin by observing a phenomenon in the physical world and then asking a question about it. This process helps explain everyday chemistry through evidence. A question leads to a hypothesis, which is a tentative explanation for what is being observed. Scientists often use earlier research and published literature to shape that idea. A strong hypothesis must be testable, meaning it can be supported by...

physical and chemical properties of matter

physical-and-chemical-properties-of-matter

Distinguishing Physical and Chemical Changes

Matter can be identified by its properties, which are the features that help us tell one substance from another. These properties fall into two main groups: physical properties and chemical properties. Understanding the difference helps explain how matter changes. A physical property is a feature of matter that is not linked to a change in chemical composition. Examples include density, color, hardness, melting point, boiling point, and electrical conductivity. Some physical properties can be...

States of matter help describe how matter behaves in chemistry. Matter is anything that has mass and takes up space. It is found everywhere, including air, water, soil, mountains, and even our bodies. The three common states on Earth are solid, liquid, and gas. A solid has a definite shape and a definite volume. Its particles, such as atoms or molecules, are packed very closely together and held in place by strong forces, so they only vibrate slightly. This tight arrangement makes solids...

what is energy?

Energy Forms and Conservation

Energy is a property of matter that appears in many forms. On Earth, most energy starts with the Sun. Plants capture light energy from the Sun and use photosynthesis to turn it into chemical energy. That stored energy can then move through living things and materials in several ways. People get energy from plant foods, and wood or coal, which come from fossilized plants, can be burned to produce heat and electricity. Energy is defined as the ability to do work. Work happens when a force moves...

measurement: standard units

Measurement: SI Units and Conversions

Measurement gives three kinds of information: a number, a unit, and an estimate of uncertainty. The number shows size or magnitude. The unit gives a standard for comparison. The uncertainty reflects possible error in the measurement. Numbers can be written in more than one way. A value may appear in decimal form or in scientific notation, which is also called exponential notation. For example, the maximum take-off weight of a Boeing 777-200ER airliner is 298,000 kilograms, or 2.98 × 10^5 kg. <br...

classifying matter by composition

Matter: Elements, Compounds, and Mixtures

Matter can be grouped by composition into pure substances and mixtures. A pure substance has a constant composition throughout and uniform properties. For example, any sample of sucrose has the same composition and the same physical properties, such as melting point, color, and sweetness, no matter where it is isolated from. A mixture contains two or more kinds of matter in varying amounts. Its parts can be separated by physical changes, such as evaporation. The components keep their own...

measurement: derived units

SI Units, Density, and Property Types

SI units and derived units help describe physical properties in chemistry. The International System of Units, or SI system, uses agreed-upon base units for seven fundamental properties: length, mass, time, temperature, electric current, amount of substance, and luminosity. Units made by combining these base units are called SI-derived units. Speed is one example. If distance is measured in meters and time in seconds, the derived unit for speed is meters per second, or m/s. Miles per hour is...

dimensional analysis

Using Conversion Factors to Cancel Units

Dimensional analysis is a method for using conversion factors to cancel units and solve measurement problems. It is also called the factor label method. The main rule is that units must be treated the same way as the numbers attached to them. A conversion factor is a ratio of two equal quantities written in different units. For example, 1 meter is equal to 1.0936 yards. That relationship can be used to build a factor that converts one unit into the other. When a value is multiplied or divided...

uncertainty in measurement: accuracy and precision

uncertainty-in-measurement-accuracy-and-precision

Measurement Error: Reading Results Correctly

Measurement error affects how scientists judge the quality of their results. Repeated measurements help show whether results are precise and accurate. A measurement is precise when repeated values are very similar. A measurement is accurate when it is very close to the true or accepted value. Precise values agree with each other, while accurate values agree with the true value. A pharmaceutical quality control chemist can use this idea to check machines that dispense 500 mL of cough syrup. The...

uncertainty in measurement: reading instruments

uncertainty-in-measurement-reading-instruments

Measurement Uncertainty and Significant Figures

Measurement uncertainty and significant figures show how carefully a value can be read from an instrument. Counting is different. If the number of objects does not change during counting, the result is exact. Defined quantities are exact too. For example, 1 foot is exactly 12 inches, 1 inch is exactly 2.54 centimeters, and 1 gram is exactly 0.001 kilograms. Most other measurements are not exact because the measuring process has limits. The result depends on the device used and on the person...

uncertainty in measurement: significant figures

uncertainty-in-measurement-significant-figures

Significant Figures and Rounding Rules

Significant figures and rounding rules help students report measurements with the right level of certainty. A measurement includes every digit that was actually measured, including the last uncertain digit. That is why a value can look simple but still carry useful information about the tool used to measure it. Zero can also be significant when it is part of a measured value. For example, if a scale reads 140 pounds to the nearest pound, the 1, 4, and 0 are all significant. Reporting...

key terms and concepts

Explore solids, liquids, gases, and plasma. Learn how particle spacing, shape, volume, compressibility, and temperature change matter's state.

States of Matter and Their Properties | JoVE K12

chemistry

JoVE Core Chemistry brings general chemistry concepts to life using concise and easy-to-understand animated video lessons. Plus, in the scientist-in-action videos, we demonstrate classical and original research experiments performed in today's laboratories worldwide.

Matter and its Interactions

PS.Chm.1.1

Physical Science

PS.PSc.1.1

PS.PSc.1.3

Louisiana Student Standards for Science

High School

Earth Science

Earth’s Systems

HS-ESS2-5

ohios-learning-standards-and-model-curriculum

Ohio’s Learning Standards and Model Curriculum

Study Of Matter

Classification of matter

Virginia  Standards of Learning

HIgh School

CH.7

CH.7.a

ES.4

ES.4.a

PS.3

PS.3.a

Arizona Science Standards

Earth and Space Science

HS.E1

HS.E1U1.12

HS.E1U1.13

new-jersey-student-learning-standards-for-science

New Jersey Student Learning Standards for Science

Earth's Place in the Universe

HS-ESS1-2

Texas Essential Knowledge and Skills

CHEM.2

CHEM.2.A

Alabama Course of Study Science

Matter and Its Interactions

9-12.PS.3.5

9-12.PS.3.5.a

Next Generation Science Standards

HS-PS1-4

Florida Department of Education

SC.912.P.8

SC.912.P.8.1

Chemistry and Physics

IPC.7

IPC.7.C

south-carolina-college-and-career-ready-science-standards

South Carolina College and Career Ready Science Standards

C-PS1-1

Earth and Space Science (ESS)

E-ESS2-2.

new-york-state-science-learning-standards

New York State Science Learning Standards

HS. Chemical Reactions

HS-PS1-2.

Georgia Standards of Excellence

SPS5.

States of Matter

Classifying Matter by Composition

Matter: Pure Substances and Mixtures
According to its composition, the matter can be classified into two broad categories &mdash; pure substances and ...

Physical and Chemical Properties of Matter

The characteristics that enable us to distinguish one substance from another are called properties.

Physical Properties of Matter

A physical property is ...

molecular-comparison-of-gases-liquids-and-solids

Molecular Comparison of Gases, Liquids, and Solids

Particles in a solid are tightly packed together (fixed shape) and often arranged in a regular pattern; in a liquid, they are close together with no ...

Intermolecular vs Intramolecular Forces

Intermolecular forces (IMF) are electrostatic attractions arising from charge-charge interactions between molecules. The strength of the intermolecular ...

Intermolecular Forces

Atoms and molecules interact through bonds (or forces): intramolecular and intermolecular. The forces are electrostatic as they arise from interactions ...

comparing-intermolecular-forces-melting-point-boiling-point

Comparing Intermolecular Forces: Melting Point, Boiling Point, and Miscibility

Intermolecular forces are attractive forces that exist between molecules. They dictate several bulk properties, such as melting points, boiling points, ...

surface-tension-capillary-action-and-viscosity

Surface Tension, Capillary Action, and Viscosity

Surface Tension
The various IMFs between identical molecules of a substance are examples of cohesive forces. The molecules within a liquid are surrounded ...

States of Matter and Phase Changes

The internal energy of a substance&#8212;the total kinetic energy of all its molecules and the potential energy of their associated forces&#8212;depends ...

Phase Transitions

Whether solid, liquid, or gas, a substance&#39;s state depends on the order and arrangement of its particles (atoms, molecules, or ions). Particles in the ...

phase-transitions-vaporization-and-condensation

Phase Transitions: Vaporization and Condensation

The physical form of a substance changes on changing its temperature. For example, raising the temperature of a liquid causes the liquid to vaporize ...

Vapor Pressure

When a liquid vaporizes in a closed container, gas molecules cannot escape. As these gas phase molecules move randomly about, they will occasionally ...

Clausius-Clapeyron Equation

The equilibrium between a liquid and its vapor depends on the temperature of the system; a rise in temperature causes a corresponding rise in the vapor ...

Phase Transitions: Melting and Freezing

Heating a crystalline solid increases the average energy of its atoms, molecules, or ions, and the solid gets hotter. At some point, the added energy ...

phase-transitions-sublimation-and-deposition

Phase Transitions: Sublimation and Deposition

Some solids can transition directly into the gaseous state, bypassing the liquid state, via a process known as sublimation. At room temperature and ...

Heating and Cooling Curves

When a substance&#8212;isolated from its environment&#8212;is subjected to heat changes, corresponding changes in temperature and phase of the substance ...

Phase Diagrams

A phase diagram combines plots of pressure versus temperature for the liquid-gas, solid-liquid, and solid-gas phase-transition equilibria of a substance. ...

Use models to explain how changes in energy affect the arrangement and movement of the particles in solids, liquids, and gases, as well as the relative strengths of their intermolecular forces.

Energy Basics

Chemical reactions, such as those that occur when you light a match, involve changes in energy as well as matter.

Chemical changes and their accompanying ...

First Law of Thermodynamics

Energy Conservation

Energy can be converted from one form into another, but all of the energy present before a change occurs always exists in some form ...

Internal Energy

The total of all possible kinds of energy present in a substance is called the internal energy (U), sometimes symbolized as E. Suppose a system with ...

Quantifying Heat

Thermal Energy&#160;

Microscopically, thermal energy is the kinetic energy associated with the random motion of atoms and molecules. Temperature is a ...

Quantifying Work

As a system undergoes a change, its internal energy can change, and energy can be transferred from the system to the surroundings, or from the ...

Enthalpy

Chemists ordinarily use a property known as enthalpy (H) to describe the thermodynamics of chemical and physical processes. Enthalpy is defined as the sum ...

Thermochemical Equations

For a chemical reaction (the system) carried out at constant pressure &ndash; with the only work done caused by expansion or contraction &ndash; the ...

Constant Pressure Calorimetry

Calorimetry is a technique used to measure the amount of heat involved in a chemical or physical process or to measure the heat transferred to or from a ...

Constant Volume Calorimetry

Calorimeters are useful to determine the heat released or absorbed by a chemical reaction. Coffee cup calorimeters are designed to operate at constant ...

using-differential-scanning-calorimetry-to-measure-changes-in-enthalpy

Using Differential Scanning Calorimetry to Measure Changes in Enthalpy

Source: Laboratory of Dr. Terry Tritt &#8212; Clemson University
Differential Scanning Calorimetry (DSC) is a method of thermodynamic analysis based on ...

Hess's Law

There are two ways to determine the amount of heat involved in a chemical change: measure it experimentally, or calculate it from other experimentally ...

Standard Enthalpy of Formation

Enthalpy changes are typically tabulated for reactions in which both the reactants and products are at the same conditions. A standard state is a commonly ...

Enthalpies of Reaction

Hess&rsquo;s law can be used to determine the enthalpy change of any reaction if the corresponding enthalpies of formation of the reactants and products ...

Use mathematics and computational thinking to execute simple calorimetric calculations based on the Law of Conservation of Energy.

PS.Chm.7.2

definition-measurement-pressure-atmospheric-pressure-barometer

Definition and Measurement of Pressure: Atmospheric Pressure, Barometer, and Manometer

Gas pressure is caused by force exerted by gas molecules colliding with the surfaces of objects. Although the force of each collision is very small, any ...

gas-laws-boyle-s-gay-lussac-charles-avogadro-s-and-ideal-gas-law

Gas Laws: Boyle's, Gay-Lussac, Charles', Avogadro's, and Ideal Gas Law

Through experiments, scientists established the mathematical relationships between pairs of variables, such as pressure and temperature, pressure and ...

applications-of-the-ideal-gas-law-molar-mass-density-and-volume

Applications of the Ideal Gas Law: Molar Mass, Density, and Volume

The volume occupied by one mole of a substance is its molar volume. The ideal gas law, PV = nRT, &nbsp;suggests that the volume of a given quantity of gas ...

mixtures-of-gases-dalton-s-law-of-partial-pressures-and-mole-fractions

Mixtures of Gases: Dalton's Law of Partial Pressures and Mole Fractions

Unless individual gases chemically react with each other, the individual gases in a mixture of gases do not affect each other&rsquo;s pressure. Each gas ...

chemical-stoichiometry-gases-using-ideal-gas-law-to-determine

Chemical Stoichiometry and Gases: Using Ideal Gas Law to Determine Moles

Chemical stoichiometry describes the quantitative relationships between reactants and products in chemical reactions.

In addition to measuring quantities ...

Use mathematics and computational thinking to explain the relationships among pressure, temperature, volume, and quantity of gas, both qualitatively and quantitatively.

PS.Chm.7.3

Understand the relationship among pressure, temperature, volume, and phase.

States of Matter and Their Properties

Description

Transcript

Tags

More videos by Standards