Name: critical load and structure stability
Uploaded: 2024-05-23T13:00:07.000Z
Duration: 1 min 14 s
Channel: JoVE

K12 Standards

Arizona Science Standards

High School

Physical Science

HS.P3

HS.P3U2.7

Stability of structures

Consider two rods connected at point O by a pin and a torsional spring of constant k. The ends of both the rods are pin-connected.
If both the rods are perfectly aligned and two loads are along the same line of action, the system stays in equilibrium.
Now, if point O is moved slightly, making a small angle with respect to the vertical position, then two couples act on the rods.
The first one is due to the applied load acting at point O, causing the rod to move away from the vertical.
The second couple is due to the torsional spring constant, which attempts to bring the rod back towards the vertical position.
If the magnitude of the moments of these two couples is the same, a critical load expression is formulated.
The system&#39;s stability depends on the comparison between the applied load and the critical load.
If the applied load surpasses the critical load, the system becomes unstable. Conversely, if the applied load is less than the critical load, then the system is stable.

stability of structures

In mechanical engineering, the stability of systems under various forces is critical for designing durable and efficient structures. One fundamental way to explore these concepts is by analyzing systems like two rods connected at a pivot point, O, with a torsional spring of spring constant k at the pivot point. This system is similar in appearance to a scissor jack used to change tires on a car. In this case, the arms of the linkage (equivalent to the rods in this system) are entirely vertical, corresponding to the case where the vehicle has been lifted as far as possible.
These rods are initially positioned vertically, and they are prevented from pivoting by the spring&#39;s action. If two external loads F and F&#39;, of equal magnitude and opposite direction, are applied to the system in such a way that they share the same line of action along the length of the rods, then the system remains in equilibrium. This alignment ensures that there is no net moment or torque acting to displace the system from its equilibrium state.
However, if the pivot point, O, is moved slightly sideways, this movement results in a small angular deviation of the rods from the vertical. This causes the ends of each rod to rotate relative to their pivot points, introducing couples into the system. The first couple results from the reaction support at point O. This force, now acting at an angle, attempts to further displace the rod from its initial vertical orientation, moving it away from equilibrium. The second couple, resulting from the torsional spring&#39;s resistance, exerts a restoring force to return the rod to its original vertical position. The system reaches a point of critical load Fcr when these two moments are equal. If the applied load exceeds the critical load, the system becomes unstable; if it is less than the critical load, the system remains stable.
This principle is universally applicable in structural systems and is extensively used in mechanical engineering designs, including the stabilization of buildings, vehicles, and machinery.

Consider two rods connected at point O by a pin and a torsional spring of constant k. The ends of both the rods are pin-connected.
If both the rods are ...

Education

JoVE Core

Mechanical Engineering

Unit 1

Columns

KEY TERMS AND CONCEPTS

critical load and structure stability

Structural stability is an important idea in mechanical engineering. It helps engineers design buildings, vehicles, and machines that stay safe and efficient under load. A simple model for studying this behavior uses two rods joined at a pivot point O with a torsional spring, which is a spring that resists twisting, at the pivot.

The setup is similar to a scissor jack used to lift a car. In the example, the linkage arms are vertical, which matches the case where the vehicle has been raised as far as possible. The rods are held in that vertical position by the spring. When two equal and opposite forces, F and F', act along the same line as the rods, the system stays in equilibrium because there is no net moment, or turning effect, to move it away from that state.

If point O shifts slightly sideways, the rods tilt a little from vertical. That small change makes each rod rotate about its pin connection and creates couples, which are pairs of forces that cause rotation. One couple comes from the support reaction at O, and it pushes the rod farther from the original position. The other couple comes from the torsional spring, and it acts as a restoring force that tries to bring the rods back to vertical.

The critical load Fcr is the load at which these two moments are equal. If the applied load is below this value, the system remains stable. If the load rises above it, the system becomes unstable. This idea is useful in many structural systems and helps explain why stability matters in engineering design.

Critical Load and Structure Stability

Structural stability is an important idea in mechanical engineering. It helps engineers design buildings, vehicles, and machines that stay safe and efficient under load. A simple model for studying this behavior uses two rods joined at a pivot point O with a torsional spring, which is a spring that resists twisting, at the pivot. The setup is similar to a scissor jack used to lift a car. In the example, the linkage arms are vertical, which matches the case where the vehicle has been raised as...

euler&#39;s formula for pin-ended columns

Critical Buckling Load in Pin-Ended Columns

Critical buckling load in pin-ended columns is a key idea in structural engineering. It explains when a column under compressive axial load becomes unstable and starts to buckle. A pin-connected column with a centric load F at one end has a reaction force of F' = -F at the other end. When the applied load rises above the critical load, buckling begins. To find the critical load, the column PQ can be treated like a vertical beam. Point O is chosen on the elastic curve of the beam at a distance...

euler&#39;s formula to columns with other end conditions

euler-s-formula-to-columns-with-other-end-conditions

Euler Buckling for Different Column Supports

Euler buckling explains how a column can fail when it is compressed. In structural engineering, it helps predict the critical load, which is the load level where a column is likely to buckle. The formula uses the modulus of elasticity, the moment of inertia of the cross-section, and the column length. The same idea also helps describe critical stress. Critical stress is found by dividing the critical load from Euler's formula by the cross-sectional area of the column. This leads to the...

euler&#39;s formula to columns: problem solving

euler-s-formula-to-columns-problem-solving

Spring-Loaded Column Buckling Analysis

Spring-loaded column buckling analysis uses static equilibrium to find the critical load in a rigid bar system. The setup has two equal-length rigid bars, AB and BC, joined at pivot point B. A tension spring with constant k is attached to B and pulls horizontally. A vertical load F is applied at point A, and the bars rotate around the pivot like a knee joint. As point B moves, the spring stretches by an amount X. The spring then pushes back against the sideways motion of B. To study the...

eccentric loading

Column Bending Under Off-Center Load

Eccentric loading shows how a column bends when a force is applied off-center. In structural engineering, this matters because the load no longer acts along the centroidal axis, so the column sees both direct compression and bending stress. The off-center force can be treated as two parts. One part is a centric load F that acts along the column’s axis. The other part is a couple moment created by the eccentricity, or distance, between the load and the centroidal axis. To study the column...

design of columns under a centric load

Column Buckling and Load Design Basics

Column design under a centric load is a key part of structural engineering. It helps engineers keep buildings and other structures stable and safe. The main tools used here are Euler’s formula and Secant’s formula. Euler’s formula is used when a column is assumed to be perfect, straight, and uniform. It also applies when the material stays within its elastic limit. The critical load from Euler’s formula depends on the material’s modulus of elasticity and the column’s shape. This formula works...

design of columns under an eccentric load

design-of-columns-under-an-eccentric-load

Eccentric Load Stresses in Structural Columns

Structural columns under eccentric load must be designed for both axial force and bending stress. An eccentric load is an off-center load, and it creates a non-uniform stress pattern across the column. Engineers must analyze this stress distribution carefully to reduce the risk of failure. The stress in an eccentrically loaded column can be treated as the sum of two parts. One part comes from an equivalent centric load, which is a load applied through the center of the column. The other part...

key terms and concepts

Learn how a torsional spring, equal forces, and critical load determine whether a rod system stays stable or becomes unstable in engineering.

Critical Load and Structure Stability | JoVE K12

JoVE Core Mechanical Engineering offers concise, easy-to-understand animated videos covering key topics such as equilibrium, forces, truss analysis, and structural mechanics. Explore their real-world applications, and witness these concepts in action through scientist-led experiments.

mechanical engineering

Position and Displacement

The position of an object defines its location relative to a convenient frame of reference at any particular time. A frame of reference is an arbitrary ...

Average Velocity

To calculate the other physical quantities in kinematics, we must introduce the time variable. The time variable allows us not only to state the position ...

Average Acceleration

The importance of understanding acceleration spans our day-to-day experiences, as well as the vast reaches of outer space and the tiny world of subatomic ...

Instantaneous Acceleration

Acceleration is in the direction of the change in velocity, but it is not always in the direction of motion. When an object slows down, its acceleration ...

velocity-and-position-by-graphical-method

Velocity and Position by Graphical Method

Velocity and position can be calculated from the known function of acceleration as a function of time. The total area under the acceleration-time graph ...

Kinematic Equations - I

When an object moves with constant acceleration, the velocity of the object changes at a constant rate throughout the motion. The kinematic equations of ...

Kinematic Equations: Problem Solving

When analyzing one-dimensional motion with constant acceleration, the problem-solving strategy involves identifying the known quantities and choosing the ...

Force

Forces affect every moment of our life. Our bodies are held to the Earth by force, and they are held together by the forces of charged particles. When we ...

Mass and Weight

Mass and weight are often used interchangeably in everyday conversation. For example,&#160; medical records often show our weight in kilograms, but never ...

Newton's Laws of Motion

Source: Andrew Duffy, PhD, Department of Physics, Boston University, Boston, MA
This experiment examines at various situations involving two interacting ...

Newton's First Law: Introduction

Motion draws our attention. Motion itself can be beautiful, causing us to marvel at the forces needed to create spectacular sights, such as that of a ...

first-law-particles-in-one-dimensional-equilibrium

First Law: Particles in One-dimensional Equilibrium

Newton&#39;s first law of motion states that a body at rest remains at rest, or if in motion, remains in motion at constant velocity, unless acted on by a ...

Newton's Second Law

Newton&#39;s second law is closely related to his first law of motion. It mathematically gives the cause-and-effect relationship between force and changes ...

Force and Acceleration

Source: Nicholas Timmons,&#160;Asantha Cooray, PhD, Department of Physics &#38; Astronomy, School of Physical Sciences, University of California, Irvine, ...

Second Law: Motion under Same Force

Newton&#39;s laws can be applied to bodies at rest and bodies in motion. Newton&#39;s first law is applied to bodies in equilibrium, whereas the second ...

Newton's Third Law: Introduction

Whenever one body exerts a force on a second body, the first body experiences a force equal in magnitude and opposite in direction, to the force that it ...

Drawing Free-body Diagrams: Rules

The first step in describing and analyzing most phenomena in physics involves the careful drawing of a free-body diagram. Free-body diagrams are useful in ...

Free Body Diagrams: Examples

Solving problems that involve forces is easy using free-body diagrams. A free-body diagram is a sketch showing all the external forces that are acting on ...

Equilibrium and Free-body Diagrams

Source: Ketron Mitchell-Wynne, PhD, Asantha Cooray, PhD, Department of Physics &#38; Astronomy, School of Physical Sciences, University of California, ...

Collect, analyze and interpret data regarding the change in motion of an object or system in one dimension, to construct an explanation using Newton’s Laws.

HS.P3U1.6

Solving Problems in Physics

Problem-solving is the ability to apply general physical principles to specific situations, usually expressed by equations. It is an essential skill in ...

Problem Solving in Statics

Problem-solving in statics is a crucial aspect of engineering and physics that involves resolving issues associated with bodies in a state of equilibrium. ...

An Introduction to Mechanics

Humans have been making ships, shelters, pyramids, weapons, agricultural equipment, and many more items without recording the process or theory behind ...

Introduction to Structures

A structure is defined as a system of interconnected members designed to support or transfer forces and successfully withstand the loads acting on them. ...

Simple Trusses

A truss is a structural framework consisting of slender members connected at joints, designed to support external loads while minimizing material usage ...

Method of Joints

The method of joints is a commonly used technique to analyze the forces in structural trusses. The method is based on the principle of equilibrium, which ...

Rigid Body Equilibrium Problems - I

A rigid body is said to be in static equilibrium when the net force and the net torque acting on the system is equal to zero. To solve for rigid body ...

Buckling of Steel Columns

Source:&#160;Roberto Leon, Department of Civil and Environmental Engineering, Virginia Tech, Blacksburg, VA
In the design of civil works, it is important ...

Machines

Machines are complex structures consisting of movable, pin-connected multi-force members that work together to transmit forces. One example of a machine ...

DC Motors

Source: Ali Bazzi, Department of Electrical Engineering, University of Connecticut, Storrs, CT. 
The DC machine operates with DC currents and voltages as ...

Rolling Resistance

When a solid cylinder rolls steadily on a rigid surface, the normal force applied by the surface on the cylinder is perpendicular to the tangent at the ...

Propulsion and Thrust

Source: Alexander S Rattner; Department of Mechanical and Nuclear Engineering, The Pennsylvania State University, University Park, PA
Aircraft, rockets, ...

Rocket Propulsion in Empty Space - I

The driving force for the motion of any vehicle is friction, but in the case of rocket propulsion in space, the friction force is not present. The motion ...

aerodynamic-performance-of-a-model-aircraft-the-dc-6b

Aerodynamic Performance of a Model Aircraft: The DC-6B

Source: Jose Roberto Moreto and Xiaofeng Liu, Department of Aerospace Engineering, San Diego State University, San Diego, CA
The low-speed wind tunnel is ...

airfoil-behavior-pressure-distribution-over-a-clark-y-14-wing

Airfoil Behavior: Pressure Distribution over a Clark Y-14 Wing

Source: David Guo, College of Engineering, Technology, and Aeronautics (CETA), Southern New Hampshire University (SNHU), Manchester, New Hampshire
An ...

Use mathematics and computational thinking to explain how Newton’s laws are used in engineering and technologies to create products to serve human ends.

Critical Load and Structure Stability

Description

Transcript

Tags

More videos by Standards