Name: shear energy stored in twisted shafts
Uploaded: 2024-05-23T13:00:12.000Z
Duration: 1 min 20 s
Channel: JoVE

When the material is subjected to a shearing stress, the strain energy density can be expressed in integral form as the product of the shearing stress and the corresponding shearing strain.
Within the elastic limit, shearing stress is proportional to the shearing strain, with a constant of proportionality being the modulus of rigidity.
Performing the integration, the strain energy density is expressed as a product of the modulus of rigidity and shearing strain squared.
The corresponding strain energy can be calculated by integrating the strain energy density over a small volume element. This equation is valid only for elastic deformations.
Consider a shaft subjected to one or more twisting couples. The shearing stress of a cross-sectional area, A, located at a distance x from a fixed end, can be expressed in terms of internal torque and the polar moment of inertia J.
The stored strain energy in such a shaft can be expressed in integral form in terms of twisting torque. Rewriting the volume element in terms of cross-sectional area simplifies the expression.

elastic strain energy for shearing stresses

Elastic Strain Energy for Shearing Stresses

As discussed in previous lessons, strain energy in a material is the energy stored when it is elastically deformed, a concept crucial in materials science and mechanical engineering. This energy results from the internal work done against the cohesive forces within the material. When a material undergoes shearing stress and corresponding shearing strain, the strain energy density, which is the energy stored per unit volume, is calculated. Within the elastic limit, where the stress is proportional to the strain through the modulus of rigidity, this strain energy density is proportional to the square of the shearing strain and the modulus of rigidity.
<img alt="Static equilibrium formula, u=1/2(G)(&#947;^2xy), mathematical equation for educational use." src="/files/ftp_upload/15685/15685_Equation_1.svg" style="text-align: center; height: 36px;" data-altupdatedat="1762173717000" data-alt="Equation 1" />
For practical applications, such as a shaft subjected to twisting from applied torques, calculating the total strain energy becomes essential. The shearing stress in a shaft can be determined by the internal torque and the shaft's polar moment of inertia. When integrated over the shaft's volume, this stress yields the total strain energy. In cylindrical shafts, this integration involves the cross-sectional area and the length of the shaft, reflecting how geometry and material properties like the modulus of rigidity influence the material's ability to resist deformation and store energy. This understanding is vital for designing mechanical structures that are both resilient and capable of efficiently enduring operational stresses.
<img alt="Torsional energy formula; U=T&#178;L/2GJ equation; physics mechanics; formula representation." src="/files/ftp_upload/15685/15685_Equation_2.svg" style="text-align: center; height: 36px;" data-altupdatedat="1762173717000" data-alt="Equation 2" />

When the material is subjected to a shearing stress, the strain energy density can be expressed in integral form as the product of the shearing stress and ...

elastic-strain-energy-for-shearing-stresses

Education

JoVE Core

Mechanical Engineering

Unit 1

Energy Methods

KEY TERMS AND CONCEPTS

shear energy stored in twisted shafts

Shear energy stored in twisted shafts depends on elastic strain energy in a material. This energy is stored when a solid is deformed within its elastic limit. It comes from internal work done against the cohesive forces inside the material.

When a material carries shearing stress, it also develops shearing strain. The strain energy density is the energy stored per unit volume. Within the elastic limit, stress is proportional to strain through the modulus of rigidity, so the strain energy density is proportional to the square of the shearing strain and the modulus of rigidity.

A practical example is a shaft under torsion from an applied torque. In that case, the shearing stress can be found from the internal torque and the shaft's polar moment of inertia. The total strain energy is then obtained by integrating this stress over the shaft volume.

For a cylindrical shaft, this integration uses the cross-sectional area and the length of the shaft. The result shows how both geometry and material properties, especially the modulus of rigidity, affect the material's ability to resist deformation and store energy. This idea is important for designing mechanical structures that can handle operating stresses efficiently.

Shear Energy Stored in Twisted Shafts

strain energy

Load-Deformation and Stored Strain Energy

Strain energy is the energy stored in a material when it deforms under load. It is a key idea in materials science and structural engineering. A loaded rod fixed at one end shows this clearly. When an axial force pulls on the free end, the rod stretches and stress builds inside it. As the axial force increases, the rod elongates more. This creates a direct link between the applied force and the amount of deformation. Engineers can show this relationship with a load-deformation plot. The plot...

strain-energy density

Energy Stored in Loaded Rods

Energy stored in a rod under axial load helps show how a material will respond to stretching and breaking. When the rod elongates, it stores strain energy as potential energy inside the material. Strain energy density is the amount of that energy per unit volume. In the elastic region, stress and strain have a linear relationship that follows Hooke's Law. The strain energy density in this region is found from the area under the stress-strain curve up to the elastic limit. This recoverable...

elastic strain energy for normal stresses

elastic-strain-energy-for-normal-stresses

Strain Energy in Stressed Materials

Strain energy in stressed materials describes the energy stored when a material deforms under load. It is an important idea in materials science and engineering. For axial loading with a uniform stress distribution, the stress is the internal force divided by the cross-sectional area, and the strain follows from the stress through the modulus of elasticity. When the stress is uniform, the strain energy density can be found from the product of stress and strain. That density is then integrated...

Shear energy stored in twisted shafts depends on elastic strain energy in a material. This energy is stored when a solid is deformed within its elastic limit. It comes from internal work done against the cohesive forces inside the material. When a material carries shearing stress, it also develops shearing strain. The strain energy density is the energy stored per unit volume. Within the elastic limit, stress is proportional to strain through the modulus of rigidity, so the strain energy...

impact loading

Impact Loading on a Fixed Rod

Impact loading on a fixed rod happens when a moving object strikes a stationary rod that has a uniform cross-sectional area and is fixed at one end. The impact makes the rod deform and begin to develop stress. This setup shows how a sudden hit can store energy in a structure. As the rod moves back toward its original shape, the stress rises to a maximum. At that point, the energy from the moving object has changed from kinetic energy into strain energy. Kinetic energy is the energy of motion,...

impact loading on a cantilever beam

Dropped-Weight Bending of a Cantilever Beam

Dropped-weight bending of a cantilever beam shows how impact loading changes a beam’s shape and stress. The beam has a circular cross-section and is fixed at one end. An object is dropped on the free end from a height h, so its potential energy from gravity becomes kinetic energy at impact. After the object hits the beam, the beam bends and develops a bending moment along its length. The bending is not uniform. The fixed end carries the highest strain energy, which is the energy stored in the...

castigliano&#39;s theorem

Using Strain Energy to Find Deflection

Castigliano's theorem uses strain energy to find deflection and rotation in elastic structures. Strain energy is the work done by external loads during elastic deformation. The theorem links that energy to the movement caused by the load. The key idea is simple. The partial derivative of the total strain energy with respect to a specific force gives the displacement at the point where that force acts. The same method also works for a moment, where the derivative gives the rotation at the point...

castigliano&#39;s theorem: problem solving

Beam Deflection from Central Load

Beam deflection from a central load can be found with Castigliano's theorem. The method applies to a simply supported beam with a point load at the center. It links the deflection at the load point to the strain energy stored in the beam. For this beam, the supports share the load equally. Each support carries half of the force. The bending moment at any point along the beam comes from these reactions and is written using the distance from the nearest support. Castigliano's theorem says the...

key terms and concepts

Learn how shear strain energy is stored in elastic materials and how torque, polar moment of inertia, and shaft geometry are used to calculate it.

Shear Energy Stored in Twisted Shafts | JoVE K12

JoVE Core Mechanical Engineering offers concise, easy-to-understand animated videos covering key topics such as equilibrium, forces, truss analysis, and structural mechanics. Explore their real-world applications, and witness these concepts in action through scientist-led experiments.

mechanical engineering

Shear Energy Stored in Twisted Shafts

Description

Transcript

Tags