Name: how measurement errors affect results
Uploaded: 2023-04-30T12:12:04.000Z
Duration: 1 min 20 s
Channel: JoVE

K12 Standards

Florida Department of Education

High School

Nature of Science

SC.912.N.1

SC.912.N.1.4

Random and Systematic Errors

Ölçüm sürecindeki hatalar yaygın bir sorundur. Bu tür hatalar iki kategoriye ayrılabilir: Rastgele ve Sistematik.
Rastgele hatalar, ölçüm sürecindeki tutarsızlığın veya ölçülen miktardaki değişikliklerin sonucudur. Bunlar, gerçek değer etrafında çok yüksek veya çok düşük dalgalanmalara neden olur.
Bir kumpas kullanarak bir solucanın uzunluğunu ölçen bir bilim adamını düşünün. Bilim adamının ölçekleri doğru okumadaki tutarsızlığı veya ölçüm sırasında solucanın sürekli vücut hareketi, yanlış uzunluk ölçümlerine neden olabilir.
Rastgele hatadan kaçınılamaz, ancak tekrarlanan denemelerle ortalaması alınabilir.
Sistematik hatalar, kalıcı bir sorunun sonuçlarıdır ve ölçümde tutarlı bir tutarsızlığa yol açar. Bu hatalar, gerçek değere kıyasla ya çok yüksek ya da çok düşük olma eğilimindedir. Örneğin, yanlış kalibre edilmiş bir tartım terazisi kullanılarak ölçülen ağırlıklar.
Bunlar tahmin edilebilir ve çoğunlukla enstrümanla ilgilidir. Bununla birlikte, rastgele hatadan farklı olarak, tekrarlanan ölçümle ortalaması alınamaz.

rastgele ve sistematik hatalar

Bilim insanları her zaman ölçümleri en yüksek doğruluk ve hassasiyetle kaydetmeye çalışır. Ancak, bazen hatalar meydana gelir. Bu hatalar rastgele veya sistemsel olabilir. Rastgele hatalar, ölçüm sürecindeki tutarsızlık veya dalgalanma veya ölçülen miktarın kendisinin farklılıkları nedeniyle gözlemlenir. Bu hatalar, tekrarlanan ölçümlerde gerçek değerden daha büyük veya daha küçük olma eğilimindedir. Ruple bir solucanın uzunluğunu ölçen bir bilim insanını düşünün. Bu ölçme sürecinde rastgele hata, bilim insanının ölçüm cihazındaki ölçekleri nasıl okuduğu konusundaki tutarsız yöntemden veya solucanın hareket etmesinden kaynaklanabilir. Rastgele hata kaçınılamaz; ancak, tekrarlanan denemelerle ortalamaya alınabilir.

Sistemsel hatalar, sürekli bir sorundan kaynaklanır ve ölçümde sürekli bir tutarsızlık meydana getirir. Bu hatalar genellikle gerçek değerden sürekli olarak daha büyük veya daha küçüktür. Bunlar öngörülebilir ve çoğunlukla enstrümantaldir. Örneğin, yanlış kalibre edilmiş bir tartı terazisi, nesneleri gerçek değerlerinden sürekli olarak daha ağır tartabilir. Rastgele hata gibi sistemsel hatalar, tekrarlanan ölçümlerle ortalama alınamaz.

Bu metin, <a href="https://openstax.org/books/chemistry-2e/pages/1-5-measurement-uncertainty-accuracy-and-precision">Openstax, Chemistry 2e, Section 1.5: Measurement Uncertainty, Accuracy, and Precision sayfasından uyarlanmıştır.</a>

Rastgele ve Sistematik Hatalar

Bilim adamları, ölçümleri en yüksek doğruluk ve hassasiyetle kaydetmek için her zaman ellerinden gelenin en iyisini yaparlar. Ancak, bazen hatalar meydana gelir. Bu hatalar olabilir ...

Education

JoVE Core

Physics

Fizik

Unit 1

Ünite 1

Units, Dimensions, and Measurements

Birimler, Boyutlar ve Ölçümler

KEY TERMS AND CONCEPTS

TEMEL TERİMLER VE KAVRAMLAR

how measurement errors affect results

Measurement errors can change how accurate and precise a result appears. Scientists try to record measurements as carefully as possible, but errors can still happen. These errors are usually random or systematic.

Random errors come from inconsistency or fluctuation in the measuring process. They can also come from changes in the quantity being measured. In repeated measurements, random error may make a value appear greater than the true value one time and less than it the next.

A simple example is measuring the length of an earthworm with a ruler. The error could come from reading the scale differently each time. It could also happen if the earthworm moves during the measurement. Random error cannot be avoided, but repeated trials can help average it out.

Systematic errors come from a persistent problem that causes a steady measurement shift. They usually make results consistently greater than the true value or consistently less than it. These errors are predictable and are often instrumental in nature.

An improperly calibrated weighing balance is one example of systematic error. It may keep weighing objects heavier than they really are. Unlike random error, systematic error cannot be averaged out by repeating the measurement.

How Measurement Errors Affect Results

the scope of physics

How Physics Shapes Science and Technology

Physics studies the interactions of energy, matter, space, and time. It looks for the basic mechanisms that explain natural phenomena. The word physics comes from the Greek word physis, which means nature. Physics helps us understand the natural world at its most fundamental level. It relies on quantitative laws, or rules written in numbers and measurements, to describe how things behave. That approach can also help other fields improve the limits of current technology. Physics matters in...

orders of magnitude

Estimating Scale with Powers of 10

Orders of magnitude help estimate the scale of a number using powers of 10. It is a simple way to round values to the nearest power of 10. This makes it easier to compare very large and very small numbers. To find the order of magnitude of a number, take its base-10 logarithm and round to the nearest integer. The result gives the power of 10 that most closely matches the original value. This method gives a consistent estimate of size without using exact digits. Orders of magnitude are useful...

/files/media/science-education/science-education-thumbs/12596.jpg

models, theories, and laws

Scientific Models, Theories, and Laws

Scientific models, theories, and laws help physicists describe natural phenomena. A model is a simplified version of a physical system that is too complex to study in full. It acts as a rough mental or visual picture of what may be happening. Good models keep the important parts and simplify the rest so the problem becomes workable. The light wave model is one example. Light waves are usually invisible, so they cannot be seen in the same way as water waves. Even so, it is useful to think of...

/files/media/science-education/science-education-thumbs/14686.jpg

units and standards of measurement

SI Units for Physical Quantities

SI units give a standard way to measure physical quantities. A physical quantity can be defined by how it is measured or by how it is calculated from other measurements. For example, the mass and dimensions of a metallic cube can be found with a weighing machine and a meter scale. Some quantities are built from others. The volume of a cube is the cube of its side length. The density of the cube is then found by dividing mass by volume. Measurements are written in units, which are standardized...

estimation of the physical quantities

Fermi Estimation for Physical Quantities

Fermi estimation helps physicists, scientists, and engineers make rough calculations for physical quantities. These estimates are also called guesstimates, order-of-magnitude approximations, back-of-the-envelope calculations, or Fermi calculations. Enrico Fermi was known for making these kinds of estimates with surprising precision. Estimation is not random guessing. It uses prior experience and sound physical reasoning to get a rough value for a quantity. This kind of reasoning helps build...

/files/media/science-education/science-education-thumbs/14734.jpg

base quantities and derived quantities

SI Base Units Behind Measured Quantities

SI base units are the starting point for measuring physical quantities. In any system of units, some quantities must be defined through direct measurement. These are called base quantities, and their units are base units. Other physical quantities are built from these base values by algebraic combinations. These are called derived quantities, and their units are derived units. For example, area comes from two lengths multiplied together. It is a derived quantity and is written in SI base units...

conversion of units

Unit Conversion Steps and Real-World Errors

Unit conversion lets you change a measurement from one unit to another. It is useful in everyday life, such as when a cookbook gives amounts in liters or ounces and you need cups instead. It also helps when directions use feet or meters, but you want to know the distance in miles. The first step is to list the given unit and the unit you need. The second step is to choose a conversion factor, which is a ratio that shows how many of one unit equal another unit. For example, 1,000 meters equal 1...

accuracy and precision

Repeated Measurements in Science

Repeated measurements help scientists check the quality of their results. They are used to judge both precision and accuracy. These two ideas are related, but they do not mean the same thing. Measurements are precise when repeated trials give very similar results. Precision shows how closely the values agree with one another. Measurements are accurate when the result is very close to the true value or the accepted value. Accuracy shows how closely the values agree with the real target. High...

random and systematic errors

Measurement errors can change how accurate and precise a result appears. Scientists try to record measurements as carefully as possible, but errors can still happen. These errors are usually random or systematic. Random errors come from inconsistency or fluctuation in the measuring process. They can also come from changes in the quantity being measured. In repeated measurements, random error may make a value appear greater than the true value one time and less than it the next. A simple...

rules for significant figures

Measurement Precision and Significant Figures

Measurement precision depends on the tool used, and significant figures show that precision. A ruler can measure length to the closest millimeter. A caliper can measure length to the nearest 0.01 mm, so it gives a more precise measurement because it can detect very small changes in length. When a value is written from a measurement, the last digit is not exact. The person making the measurement must estimate that digit. For example, a stick that seems to fall between 13.2 cm and 13.3 cm must...

significant figures in calculations

Rounding Rules for Significant Figures

Rounding rules for significant figures help show the right level of certainty in measured results. When a calculation is reported with the correct number of significant figures, it better matches the uncertainty in the measurements. The rounding rule depends on the type of math being done. For addition and subtraction, the result should have the same number of decimal places as the number with the fewest decimal places. For multiplication and division, the result should have the same number of...

dimensional analysis

Dimensional Checks in Physics Equations

Dimensional consistency is a key check in physics equations. It means the dimensions on both sides of an equation must match. The idea helps show whether an equation can represent a real physical law. The first rule is simple: expressions on each side of the equal sign must have the same dimensions. That makes sense because you can only add or subtract quantities of the same type. The second rule says that the input to a standard mathematical function, such as a trigonometric function, a...

problem solving: dimensional analysis

Dimensional Checks for Physics Equations

Dimensional analysis helps check whether physics equations make sense. It compares the dimensions on each side of an equation and shows whether the units are consistent. This method is useful for spotting algebra errors, typos, and for remembering physical laws. A valid equation must follow two rules. First, both sides of an equality must have the same dimension, so only quantities with matching dimensions can be added or subtracted. Second, common math functions such as exponential,...

/files/media/science-education/science-education-thumbs/14687.jpg

solving problems in physics

Physics Problem Solving: Strategy to Check

Physics problem solving uses general physical principles to work out specific situations. It is a key skill in physics, and it can also help with everyday life. The same analytical skills can be used in new situations, while a list of facts can never cover every possible case. Solving physics problems also takes creativity and insight. These skills grow with experience and practice. There is no simple step-by-step method that works for every problem, but a three-stage process can guide the...

key terms and concepts

Learn how random and systematic errors affect scientific measurements, with clear examples like a moving earthworm and an uncalibrated balance.

How Measurement Errors Affect Results | JoVE K12

physics

JoVE Temel Fizik, kinematik, dinamik, akışkanlar mekaniği, statik, dalgalar ve akustik dahil olmak üzere temel fizik konularının teorisini ve uygulamasını kısa ve anlaşılması kolay animasyonlu videolarla tanıtıyor. Ek olarak, sektör içindeki bilim insanı videoları, dünya çapındaki günümüz laboratuvarlarında gerçekleştirilen klasik ve orijinal araştırma deneylerinde ilgili kavramların uygulanmasını göstermektedir.

The Scientific Method

The scientific method is a detailed, empirical problem-solving process used by biologists and other scientists. This iterative approach involves ...

Scientific Method

The scientific method is used to solve problems and explain phenomena. The development of the scientific method coincided with changes in philosophy ...

Chemistry is an empirical science. Scientists often pose questions to understand the chemistry in everyday life and seek answers to these questions. To ...

Psychology as a Science

In psychology, researchers use scientific methods to understand the mind and behavior, focusing on evidence-based research as the foundation of 
...

Research is what makes the difference between facts and opinions. Facts are observable realities, and opinions are personal judgments, conclusions, or ...

Define a problem based on a specific  body of knowledge, for example: biology, chemistry, physics, and earth/space science, and do the following:  
Pose questions about the natural world, (Articulate the purpose of the investigation and identify the relevant scientific concepts). 
Conduct systematic observations, (Write procedures that are clear and replicable. Identify observables and examine relationships between test (independent) variable and outcome (dependent) variable. Employ appropriate methods for accurate and consistent observations; conduct and record measurements at appropriate levels of precision. Follow safety guidelines). 
Examine books and other sources of information to see what is already known, 
Review what is known in light of empirical evidence, (Examine whether available empirical evidence can be interpreted in terms of existing knowledge and models, and if not, modify or develop new models). 
Plan investigations, (Design and evaluate a scientific investigation). 
Use tools to gather, analyze, and interpret data (this includes the use of measurement in metric and other systems, and also the generation and interpretation of graphical representations of data, including data tables and graphs), (Collect data or evidence in an organized way. Properly use instruments, equipment, and materials (e.g., scales, probeware, meter sticks, microscopes, computers) including set-up, calibration, technique, maintenance, and storage). 
Pose answers, explanations, or descriptions of events, 
Generate explanations that explicate or describe natural phenomena (inferences), 
Use appropriate evidence and reasoning to justify these explanations to others, 
Communicate results of scientific investigations, and 
Evaluate the merits of the explanations produced by others.

SC.912.N.1.1

Describe and explain what characterizes science and its methods.

SC.912.N.1.2

Inductive Reasoning

Inductive reasoning is a form of logical thinking that uses related observations to arrive at a general conclusion. It is uncertain and operates in ...

Deductive Reasoning

Deductive reasoning, or deduction, is the type of logic used in hypothesis-based science. In deductive reasoning, the pattern of thinking moves in the ...

Correlation and Causation

Correlation and CausationStatistical tests can calculate whether there is a relationship, or correlation, between independent and dependent variables. A ...

Recognize that the strength or usefulness of a scientific claim is evaluated through scientific argumentation, which depends on  critical and logical thinking, and the active consideration of alternative scientific explanations to explain the data presented.

SC.912.N.1.3

Scientific Laws and Theories

Scientific Laws

In science, a law is defined as a concise, verbal or mathematical, statement that summarizes a vast number of experimental observations. ...

Reliability in Psychology Experiments

Source: Laboratories of Gary Lewandowski, Dave Strohmetz, and Natalie Ciarocco&#8212;Monmouth University

In order to study something scientifically, a ...

Scientists always try their best to record measurements with the utmost accuracy and precision. However, sometimes errors do occur. These errors can be ...

uncertainty-in-measurement-accuracy-and-precision

Uncertainty in Measurement: Accuracy and Precision

Scientists typically make repeated measurements of a quantity to ensure the quality of their findings and to evaluate both the precision and the accuracy ...

systematic-error-methodological-and-sampling-errors

Systematic Error: Methodological and Sampling Errors

Systematic errors, depending on their source, are of four types &#8211; sampling, instrumental, method, and personal errors.
Sampling errors occur due to ...

Realism in Experimentation

Source: Laboratories of Gary Lewandowski, Dave Strohmetz, and Natalie Ciarocco&#8212;Monmouth University

In an ideal world researchers would conduct ...

Accuracy and Precision

Data Validation

Method validation is a crucial process in analytical chemistry designed to confirm that a given method consistently produces reliable and high-quality ...

Identify sources of information and assess their reliability according to the strict standards of scientific investigation.

Describe and provide examples of how similar investigations conducted in many parts of the world result in the same outcome.

SC.912.N.1.5.

Describe how scientific inferences are drawn from scientific observations and provide examples from the content being studied.

SC.912.N.1.6

from-theory-to-design-the-role-of-creativity-in-designing-experiments

From Theory to Design: The Role of Creativity in Designing Experiments

Source: Laboratories of Gary Lewandowski, Dave Strohmetz, and Natalie Ciarocco&#8212;Monmouth University

Research studies come into being when a ...

Recognize the role of creativity in constructing scientific questions, methods and explanations.

SC.912.N.1.7

How Measurement Errors Affect Results

Description

Transcript

Tags

More videos by Standards