Name: beam forces: tension, shear, and bending
Uploaded: 2025-05-22T09:06:03.000Z
Duration: 1 min 30 s
Channel: JoVE

Bir kiriş bir yüke maruz kaldığında, normal, kesme ve eğilme momentleri olarak kategorize edilebilecek iç kuvvetlere maruz kalır.
İç kuvvetler, kesitler yöntemi kullanılarak belirlenebilir. Çiftler halinde meydana geldikleri için özel bir işaret kuralı uygulanır ve yönleri, bölümün hangi tarafının analiz edileceğine bağlıdır.
Normal kuvvet, gerilim oluşturuyorsa pozitif olarak kabul edilirken, cisimde sıkıştırma oluşturuyorsa negatif olarak kabul edilir.
Enine kesite teğet olarak etki eden kuvvetlerin, kesitin sol ve sağ taraflarında sırasıyla aşağı ve yukarı doğru yönlendirildiğini varsayalım. Bu durumda, kesme kuvveti pozitif olarak kabul edilir ve saat yönünde bir dönüş ile sonuçlanır.
Benzer şekilde, her iki taraftaki kuvvetlerin yönü tersine çevrilirse, negatif bir kesme üretilir ve bu da saat yönünün tersine bir dönüşle sonuçlanır.
Kirişe bir dış kuvvet etki ettiğinde, yukarı veya aşağı içbükey bir eğrilik oluşturan bir eğilme momenti yaşar. Eğilme momenti yukarı doğru eğrilik için pozitif, aşağı doğru eğrilik için negatiftir.

<ol>
	<li>Ferdinand Beer, E. Johnston, David Mazurek, Phillip Cornwell ve Brian Self (2019). Mühendisler için Vektör Mekaniği: Statik ve Dinamiks. McGraw Hill. Sayfa 380–391.</li>
	<li>Russell C. Hibbeler. (2016). Mühendislik Mekaniği: Statik ve Dinamik. Pearson. sayfa 343-345.</li>
</ol>

İşaret düzeni

Sign Convention

Birçok yüke maruz kalan bir kirişi analiz ederken, yapının içinde oluşan iç kuvvetleri ve momentleri anlamak son derece önemlidir. Bu iç kuvvetler genellikle normal kuvvetler, kesme kuvvetleri ve bükülme momentleri olarak genel olarak sınıflandırılabilir. Bu kuvvetleri ve momentleri belirlemek için kesitler metodu kullanılır ve analiz edilen kesimin yönüne ve tarafına bağlı olarak belirli bir işaret düzeni uygulanır.

Normal kuvvet, kirişin kesitine dik olarak etki eder ve nesne içinde gerilme veya basınç oluşturabilir. Normal kuvvet gerilme oluşturduğunda pozitif olarak kabul edilirken, basınç oluşturduğunda negatif olarak kabul edilir.

Kesme kuvveti, kirişin kesitine teğet olarak etki eden kuvvetlere atıfta bulunur. Bu kuvvetler genellikle bir çift halinde ortaya çıkar, bir kuvvet kesitin sol tarafında etki ederken diğeri sağ tarafında etki eder. Sol taraftaki kuvvet aşağı yönlüyse ve sağ taraftaki kuvvet yukarı yönlüyse, kesme kuvveti pozitif kabul edilir ve saat yönünde bir dönme meydana gelir. Bunun tersine, her iki tarafındaki kuvvetlerin yönü değişirse, negatif bir kesme kuvveti üretilir ve saat yönünün tersine bir dönme olur.

Bükülme momenti, kirişe etki eden dış bir kuvvetin neden olduğu dönme etkisidir. Böyle bir kuvvete maruz kaldığında, kiriş bir eğriliğe sahip olur, bu eğriliğin ya yukarıya (konkav) veya aşağıya (konveks) yönlü olması mümkündür. Bükülme momenti için işaret düzeni, pozitif bir bükülme momentinin yukarıya (konkav) bir eğriliğe, negatif bir bükülme momentinin ise aşağıya (konveks) bir eğriliğe karşılık geldiğini belirtir. Bu düzen, kirişin deformasyon modelini anlamak ve bükülmeye karşı dirençli ve verimli yapısal elementler tasarlamak için önemli bir rol oynar.

Özetlemek gerekirse, normal kuvvet, kesme kuvveti ve bükülme momenti için işaret düzenleri yapısal analizde temel araçlardır. Mühendislerin ve tasarımcıların çeşitli yüklere maruz kalan yapıların davranışını anlamalarına, muhtemel hata modellerini tahmin etmelerine ve sağlam ve verimli yapısal elemanları tasarlamalarına yardımcı olurlar.

İşaret Düzeni

Çeşitli yüklere maruz kalan bir kirişi analiz ederken, yapı içinde oluşan iç kuvvetleri ve momentleri anlamak çok önemlidir. Bunlar...

Education

JoVE Core

Mechanical Engineering

Makine Mühendisliği

Unit 1

Ünite 1

Internal Forces

İç Kuvvetler

KEY TERMS AND CONCEPTS

TEMEL TERİMLER VE KAVRAMLAR

beam forces: tension, shear, and bending

Beam analysis depends on the internal forces and moments inside a structure. These include normal force, shear force, and bending moment. Engineers use the method of sections to cut the beam and find these values. A sign convention helps show whether each result is positive or negative.

Normal force acts perpendicular to the beam’s cross-section. It can pull the material in tension or push it in compression. Tension is taken as positive, while compression is taken as negative. This makes it easier to read and compare force results during structural analysis.

Shear force acts tangentially along the cross-section of the beam. It often appears as a pair of forces, with one side of the cut carrying the left-side force and the other side carrying the right-side force. A downward force on the left side and an upward force on the right side represent positive shear and a clockwise rotation. If the directions are reversed, the shear force is negative and the rotation is counterclockwise.

Bending moment describes the turning effect created by an external force on a beam. It changes the beam’s shape into either an upward, concave curve or a downward, convex curve. A positive bending moment gives upward, concave curvature. A negative bending moment gives downward, convex curvature. These conventions help predict how beams deform under load and support better structural design.

Beam Forces: Tension, Shear, and Bending

sign convention

Beam analysis depends on the internal forces and moments inside a structure. These include normal force, shear force, and bending moment. Engineers use the method of sections to cut the beam and find these values. A sign convention helps show whether each result is positive or negative. Normal force acts perpendicular to the beam’s cross-section. It can pull the material in tension or push it in compression. Tension is taken as positive, while compression is taken as negative. This makes it...

normal and shear force

Beam Loads and Internal Forces

Beam loads create internal forces inside a structure. Weight, pressure, and other external forces can all act on a beam. These internal forces affect the beam’s stability and strength. Engineers study these forces to find their size and direction. A common approach is the method of sections. In this method, an imaginary cut is made at a chosen point on the beam, and the forces at that section are analyzed. One internal force is the normal force, also called the axial force. It acts...

bending and torsional moments

Forces That Bend and Twist Materials

Bending and torsional moments describe how materials respond to force. These ideas are important in structural engineering because they help explain how beams, rulers, and screws change shape under load. A moment depends on both the size of the force and the distance from the point of interest to the force’s line of action. A bending moment forms when an external force makes a structural element bend. If the element bends upward, the top side is in compression and the bottom side is in tension.

internal loadings in structural members: problem solving

internal-loadings-in-structural-members-problem-solving

Beam Internal Force Analysis at Point A

Beam internal force analysis shows how normal force, shear force, and bending moment act inside a structural member. These internal loadings help engineers check whether a beam can support the external forces applied to it. The example uses a beam OC that weighs 5 kN and is inclined at 53.13° with the horizontal. The beam is supported at both ends. The goal is to find the internal loadings at point A. The first step is to find the reaction force at point C. This is done by taking the moment...

beams

Beam Types and Support Conditions

Beams are key parts of structural engineering and construction. They support loads that act at different points along their length. Engineers use beam shape and support conditions to understand how a beam will perform. Beams can be classified by geometry. Straight beams are the most common and have a constant cross-section along their length. Tapered beams change in cross-section from one end to the other, while curved beams have a curved shape. Beam cross-section also matters. Common shapes...

shear diagram

Beam Shear Force Diagram

Beam shear force diagrams show how shear changes along the length of a supported beam. In beam mechanics, they help students track the internal shear force caused by perpendicular loads. The beam AB in this example is supported at both ends, so the first step is to draw a free-body diagram that shows the external forces and internal reactions. The reaction forces at supports A and B are found with equilibrium equations for force and moment. For the beam shown, the vertical reaction at A is 24...

bending moment diagram

Beam Load Analysis with Moment Diagrams

Beam load analysis uses a bending moment diagram to show how bending changes along the length of a beam. This diagram helps engineers and designers check whether a structure can handle applied forces. It is also useful for parts such as shelving arms, which must resist forces and moments from a load. To build the diagram, start by finding the reactive forces and any couple moments on the beam. In some cases, especially when a beam is inclined, these forces must be resolved into components that...

relation between the distributed load and shear

relation-between-the-distributed-load-and-shear

Shear Change Under Distributed Loading

Shear force changes along a beam under a distributed load. In structural analysis, this relationship helps explain how beams respond to loading conditions that also include concentrated loads and a couple moment. To study the link, consider a small beam section that has no concentrated load or couple moment on it. Draw a free-body diagram for that elemental section. It includes the distributed load along the beam, the shear force V(x) on the right-hand side of the cut, and a small added shear...

relation between the shear and bending moment

relation-between-the-shear-and-bending-moment

Shear and Moment Diagrams in Beam Loads

Shear and moment diagrams help show how a beam responds to loads. A beam can carry a distributed load, concentrated loads, and a couple moment. These loads create internal shear forces and bending moments. The beam is examined by isolating a small elemental section and drawing a free-body diagram. For that section to stay in equilibrium, the moment on the right side must be slightly larger than the moment on the left side. The distributed load also has a resultant force that acts at a...

shear and bending moment diagram: problem solving

shear-and-bending-moment-diagram-problem-solving

Beam Load Analysis with Shear Diagrams

Beam load analysis uses shear and bending moment diagrams to track the internal forces in a beam. These diagrams are important when a beam carries concentrated loads and a distributed load. They help show how the beam responds so structures can be designed safely and efficiently. The first step is to draw a free-body diagram of the whole beam. A free-body diagram shows the concentrated loads, the distributed load, and the reaction forces at the supports. Use the equilibrium equations, where...

cable subjected to concentrated loads

Finding Tension in a Loaded Cable

Flexible cables can carry vertical point loads between two fixed supports. The cable is treated as flexible, inextensible, and nearly weightless. Under these conditions, it changes shape to form straight-line segments, and each segment carries a constant tensile force. To analyze the cable, a free-body diagram is drawn for the whole cable. This helps identify the reaction forces at the supports. In many cases, the number of unknown reaction components is greater than the available equilibrium...

cable subjected to a distributed load

Finding Cable Shape Under Distributed Load

Cable shape under a distributed load is found by analyzing the forces along a small piece of the cable. This method is important in suspension bridge design because the main cables must carry changing loads safely. The load causes the tensile force in the cable to change, and it also creates cable deformation. The analysis starts with a free-body diagram of a short cable segment. The diagram shows the distributed load and the change in tensile force across that segment. Equilibrium equations...

cable subjected to its own weight

Cable Sag Under Its Own Weight

Overhead power transmission cables sag under their own weight, and that shape affects how they carry electricity across long distances. To study this behavior, the cable is analyzed with a generalized loading function. This function treats the load along the cable's arc length instead of its projected length, which gives a more accurate picture of the cable's response. The analysis then focuses on a small cable segment. A free-body diagram is drawn to show the forces acting on that segment.

cable: problem solving

Cable Tension Under Uniform Loading

Cable tension under uniform loading is found by analyzing a cable fixed between two supports. The problem starts with the support conditions and the load on the cable. From there, the cable’s shape must be described with an equation that matches the curve formed by the load. The next step is to integrate the shape equation to get the cable’s shape function. This makes it possible to solve for constants in the equation. The boundary condition at the origin gives one constant. The slope, which...

key terms and concepts

Learn how normal force, shear force, and bending moment use sign conventions in beam analysis, and how tension, compression, and curvature are labeled.

Beam Forces: Tension, Shear, and Bending | JoVE K12

JoVE Core Makine Mühendisliği, denge, kuvvetler, kafes kiriş analizi ve yapısal mekanik gibi temel konuları kapsayan kısa, anlaşılması kolay animasyonlu videolar sunar. Gerçek dünyadaki uygulamalarını keşfedin ve bilim insanlarının önderlik ettiği deneylerle bu kavramların uygulanmasına tanık olun.

mechanical engineering

Beam Forces: Tension, Shear, and Bending

Description

Transcript

Tags