Name: mass analyzers and ion separation
Uploaded: 2024-04-04T10:51:34.000Z
Duration: 1 min 13 s
Channel: JoVE

Yaygın kütle analizörleri arasında manyetik sektör, çift odaklamalı, dört kutuplu, uçuş süresi ve iyon tuzağı analizörleri bulunur.
Herhangi bir kütle analizörünün kapasitesi, benzer kütle-yük oranlarına sahip iyonları ayırt etme yeteneğini tanımlayan çözünürlüğü ile değerlendirilebilir.
Çözünürlük, bir tepe noktasının nominal m/z değerinin, onunla bitişik bir tepe noktası arasındaki en küçük çözülebilir farka oranı olarak ifade edilir. Analizör çözünürlüğü için sınırlayıcı faktörler, analizörün tipine bağlıdır.
Örneğin, basit bir manyetik sektör analizörü, iyonların manyetik alana girdiklerinde yaklaşık olarak aynı kinetik enerjiye sahip olmalarına ihtiyaç duyar, böylece farklı m/z değerlerine sahip iyonlar farklı yörüngelere güvenilir bir şekilde saptırılır.
Bu nedenle, parçalanma ve hızlanma sırasında ortaya çıkan küçük kinetik enerji değişimleri bile bu ayrımı daha az etkili hale getirir.
Bununla birlikte, çift odaklı bir analizör, kinetik enerji farklılıklarını düzeltmek için ek bir uygulamalı elektrik alanı sektörü kullanır ve bu da çözünürlükte on kata kadar bir artış sağlayabilir.

kütle analizörleri: genel bakış

Mass Analyzers: Overview

Kütle analizörü, kütle spektrometresinin önemli bir bileşenidir. İyonizasyon odasında, buharlaşan numune, radikal bir katyon oluşturmak ve ayrıca nötr moleküllere, radikallere ve katyonlara parçalanmak üzere yüksek enerjili bir elektron ışınıyla bombardımana tabi tutulur. Bir dizi negatif yüklü hızlandırıcı plaka, katyonları kütle analizörüne doğru hızlandırır. Kütle analizörü iyonları kütle-yük (m/z) oranlarına göre ayırır ve daha sonra onları dedektöre yönlendirir. Yaygın kütle analizörleri arasında manyetik sektör, çift odaklı, dört kutuplu, uçuş süresi ve iyon tuzağı bulunur.

Manyetik sektör analizöründe bir manyetik alan uygulanır ve mobil yükler kavisli bir yola sapar. Belirli bir manyetik alan için eğrilik yarıçapı m/z değerine bağlıdır ve belirli bir m/z değerine sahip iyonlar dedektöre geçer. Sonuç olarak, cihazın manyetik alanı, daha geniş bir m/z aralığındaki iyonları dedektöre sırayla geçirmek için sürekli olarak değiştirilir.

Çift odaklı bir kütle analizörü, elektrostatik sektör ile manyetik sektörün bir kombinasyonunu kullanır. İyonlar kaynaktan çıktıkça, elektrostatik alan kinetik enerji yayılımını en aza indirmek için iyon ışınını odaklar ve ardından iyonları manyetik sektöre yönlendirir. Manyetik sektör iyonları sapmaya göre sıralar. Işının bu çift odaklılığı, yüksek çözünürlüğün elde edilmesine yardımcı olur.

Kütle spektrometresinin çözünürlüğü, birbirine yakın iki kütle spektrumunu ayırt etme yeteneği olarak tanımlanır. Birim çözünürlük, cihazın kütleleri bir tam sayı birimi farkla ayırt etme yeteneğini gösterir. Örneğin birim çözünürlüğe sahip bir cihaz m/z 50'yi m/z 51'den, m/z 100'ü m/z 101'den veya m/z 500'ü m/z 501'den ayırt edebilir. Genel olarak ticari spektrometrelerin çözünürlüğü şu şekildedir: 500 ila 500.000 aralığında.

Kütle Analizörleri: Genel Bakış

Yaygın kütle analizörleri arasında manyetik sektör, çift odaklamalı, dört kutuplu, uçuş süresi ve iyon tuzağı analizörleri bulunur.
Herhangi bir kütle analizörünün kabiliyeti ...

Education

JoVE Core

Analytical Chemistry

Analitik Kimya

Unit 1

Ünite 1

Principles of Mass Spectrometry

Kütle Spektrometrisi İlkeleri

KEY TERMS AND CONCEPTS

TEMEL TERİMLER VE KAVRAMLAR

mass analyzers and ion separation

Mass analyzers separate ions by their mass-to-charge ratio, or m/z, in a mass spectrometer. After a sample is vaporized in the ionization chamber, it is hit with a high-energy electron beam. This creates a radical cation and also produces neutral molecules, radicals, and cations. Negatively charged accelerator plates then push the cations into the mass analyzer, where they are sent on to the detector.

Several mass analyzer designs are commonly used. These include magnetic sector, double-focusing, quadrupole, time-of-flight, and ion trap analyzers. In a magnetic sector analyzer, a magnetic field bends the moving ions into a curved path. The radius of that curve depends on the ion's m/z value. By changing the magnetic field, the instrument can pass ions with different m/z values to the detector one after another.

A double-focusing mass analyzer combines an electrostatic sector and a magnetic sector. As ions leave the source, the electrostatic field focuses the beam and reduces the spread in kinetic energy. The beam then enters the magnetic sector, which separates the ions by deflection. This double-focusing design helps the instrument achieve high resolution.

Resolution describes how well a mass spectrometer can tell apart two closely spaced mass spectra. Unit resolution means the instrument can distinguish masses that differ by one integer unit, such as m/z 50 and 51, or 100 and 101, or 500 and 501. In commercial spectrometers, resolution is generally in the range of 500 to 500,000.

Mass Analyzers and Ion Separation

mass spectrometry: overview

Mass Spectrometry and Molecular Identity

Mass spectrometry helps identify a compound by measuring its molecular mass and molecular formula. It does this by turning the analyte molecule into ions and then comparing ion abundance with mass-to-charge ratio. One common ionization method is electron ionization, or EI. In EI, high-energy electron beams strike analyte molecules in the gas phase. The beam removes an electron and leaves a molecular ion behind. A molecular ion is a radical cation, so it has a positive charge and an unpaired...

mass spectrometry: isotope effect

Isotope Peaks in Mass Spectra

Isotope peaks in mass spectra show how natural isotope mixtures change the signal of a molecule. Most elements occur as a mix of isotopes, which are atoms of the same element with different numbers of neutrons. Because isotopes have different masses, the same fragment can appear at more than one position in a spectrum. The mass of a molecule depends on which isotopes are present in its atoms. The size of each isotope peak also depends on how common those isotopes are in nature. Carbon is a...

mass spectrometry: molecular fragmentation overview

mass-spectrometry-molecular-fragmentation-overview

Mass Spectrometry Fragmentation Patterns

Mass spectrometry fragmentation patterns show how a molecular ion breaks apart after ionization. When a molecule loses an electron inside the mass spectrometer, its structure becomes unstable. The ion then fragments at bonds that often produce the most stable pieces. One common pattern is cleavage of a single bond in the molecular ion. This break forms a radical and a cation. The bond can split in more than one way, but the favored path is the one that gives the more stable carbocation rather...

mass spectrometers

How Mass Spectrometers Sort Ions

A mass spectrometer sorts charged ions by their mass-to-charge ratio and records their relative abundance. It turns vaporized analyte molecules into ions, separates them, and then measures the signal from each type of ion. The process begins in the ionization chamber. The analyte is in the gas phase inside a vacuum, and it is struck by high-energy electrons. The electrons have about 70 eV of energy, which is enough to remove an electron from the analyte and form a molecular ion. After...

mass spectrum

Reading Peaks in a Mass Spectrum

A mass spectrum shows the charged fragments in an analyte as peaks plotted by mass-to-charge ratio, or m/z. The x-axis gives the mass of each charged fragment divided by the number of charges it carries. The y-axis shows the relative abundance of each charged species based on the signal intensity recorded at the detector. The tallest peak is called the base peak. It is assigned an abundance of 100%, and the other peaks are scaled against it. The peak from the molecular ion is called the parent...

mass spectrum: interpretation

Decoding Molecular Ions in Mass Spectra

Mass spectra help scientists identify an unknown compound by finding the molecular ion peak. The molecular ion peak shows the mass of the intact molecule, but it is often weak or missing because high-energy electron beams cause strong fragmentation. When that happens, a soft-energy electron beam can be used to scan the spectrum and improve the molecular ion signal. Other ionization methods can also give a stronger molecular ion peak. Chemical ionization, field ionization, and desorption...

mass analyzers: overview

Mass analyzers separate ions by their mass-to-charge ratio, or m/z, in a mass spectrometer. After a sample is vaporized in the ionization chamber, it is hit with a high-energy electron beam. This creates a radical cation and also produces neutral molecules, radicals, and cations. Negatively charged accelerator plates then push the cations into the mass analyzer, where they are sent on to the detector. Several mass analyzer designs are commonly used. These include magnetic sector,...

mass analyzers: common types

Quadrupole, TOF, and Ion Trap Analyzers

Quadrupole, time-of-flight, and ion trap mass analyzers each separate ions in a different way. They are common tools in mass spectrometry and help sort ions by their mass-to-charge ratio, or m/z. A quadrupole mass analyzer uses four cylindrical metal rods arranged in a diamond shape. The rods carry a direct current, or DC, voltage and a radio-frequency AC voltage. Ion motion depends on the field strength, so only ions with a certain m/z resonate and reach the detector at that setting. This...

high-resolution mass spectrometry (hrms)

Mass Accuracy in HRMS Analysis

High-resolution mass spectrometry separates ions by very small differences in mass. This matters because atomic masses are not always exact whole numbers, even though they are often rounded for simple calculations. Atomic mass is usually estimated by adding the masses of protons and neutrons. In reality, the proton and neutron do not have exactly the same mass. That creates small differences when atomic masses are compared to the simplest hydrogen atom. Helium, for example, is made of 2...

mass spectrometry: complex analysis

Hyphenated Mass Spectrometry Methods

Mass spectrometry can be paired with separation methods to study complex mixtures. This combination is called a hyphenated method. It helps when a pure mass spectrum is too hard to read because a mixture causes too much fragmentation and too many overlapping signals. GC-MS is one common hyphenated method. GC stands for gas chromatography, which separates volatile, thermally stable compounds in narrow capillary columns before they enter the mass spectrometer. This approach is widely used in...

tandem mass spectrometry

MS/MS Scan Modes and Fragment Ions

Tandem mass spectrometry uses two or more mass analyzers in series to improve selectivity and lower chemical noise during analyte detection. A set of analyzers separated by an interaction cell lets the instrument break ions apart and study the fragment ions that form. Fragmentation happens in the interaction cell and can be caused in several ways. Collision-induced dissociation, or CID, uses inert gases such as nitrogen, argon, or helium. Other methods include surface-induced dissociation...

gas chromatography&ndash;mass spectrometry (gc&ndash;ms)

How GC-MS Separates and Identifies Compounds

Gas chromatography-mass spectrometry (GC-MS) separates compounds in a mixture and then identifies them. A gas chromatograph first splits the mixture into its parts. A mass spectrometer then analyzes each part on its own to determine molecular masses and molecular structures. The gas chromatograph uses a long, narrow capillary column. The inner wall of the column has a polysiloxane coating. This coating serves as the stationary phase. It has a high boiling point, low viscosity, and low polarity.

inductively coupled plasma&#8211;mass spectrometry (icp&#8211;ms): overview

inductively-coupled-plasmamass-spectrometry-icpms-overview

ICP-MS Sample Ionization and Detection

ICP-MS uses an inductively coupled plasma torch to turn samples into ions for mass analysis. Solid samples are first dissolved and volatilized before they enter the hot argon plasma. Solution samples are nebulized, which means they are converted into a fine spray, and then passed through the same plasma. Inside the plasma, the analytes break apart. Their atoms become positively charged ions, along with some molecular species. These positive ions are sent to the mass spectrometer, where they...

inductively coupled plasma-mass spectrometry (icp-ms): interferences

inductively-coupled-plasma-mass-spectrometry-icp-ms-interferences

ICP-MS Signal Interference Sources and Fixes

Inductively coupled plasma-mass spectrometry (ICP-MS) is a sensitive method for elemental analysis, but its spectra can be affected by interferences. These interferences can make the mass signal less accurate, even when the instrument is working well. Spectroscopic interferences happen when ions in the plasma have the same mass-to-charge ratio, or m/z, as the analyte ion. This group includes isobaric interferences, polyatomic ion interferences, and refractory oxide ion interferences. Isobaric...

key terms and concepts

See how mass analyzers separate ions by m/z, how magnetic sector and double-focusing designs work, and what resolution means in mass spectrometry.

Mass Analyzers and Ion Separation | JoVE K12

JoVE Core Analitik Kimya, karmaşık kimyasal prensiplerini anlaşılır, ilgi çekici animasyonlara dönüştürerek basitleştirir ve SI Birimlerinden NMR spektroskopisine kadar konuları daha erişilebilir ve anlaşılır hale getirir. Buna ek olarak, bilim insanlarının yer aldığı videolar, bu kavramların dünya çapındaki laboratuvarlarda yürütülen gerçek dünya araştırmalarındaki uygulamalarını gösterir.

analytical chemistry

Mass Analyzers and Ion Separation

Description

Transcript

Tags