Name: circuit source symbols and controls
Uploaded: 2024-04-11T12:48:28.000Z
Duration: 1 min 18 s
Channel: JoVE

Bir devredeki kaynaklar bağımsız veya bağımlı olabilir.
Bağımsız gerilim veya akım kaynakları, diğer devre elemanlarından etkilenmeyen gerilim ve akımı sağlar.
Bağımsız voltaj kaynaklarının sembolleri kutuplara sahipken, bağımsız akım kaynakları akım yönünü belirtmek için oklar kullanır.
Kısa devre, sıfır voltajlı bağımsız bir voltaj kaynağıdır, açık devre ise sıfır akımlı bağımsız bir akım kaynağıdır.
Bağımlı kaynaklar, diğer devre elemanları tarafından kontrol edilen gerilim veya akım jeneratörleridir. Elmas şekli ile temsil edilirler.
Kontrol ve kontrol edilen parçalarına dayanarak, bağımlı kaynaklar dört kategoriye ayrılır.
Bağımlı kaynağın voltajının dirençten geçen akım tarafından kontrol edildiği bir devre düşünün.
Direnç ile seri olarak bir kısa devre eklenirse, kontrol akımı kısa devredeki akıma eşdeğerdir.
Akım oranını kontrol etmek için kaynak voltajı, bağımlı kaynağın kazancını temsil eder.
Benzer şekilde, kontrol voltajı açık devre voltajı olarak düşünülebilir.
Bu nedenle, bağımlı kaynakların voltajı veya akımı, kontrol voltajı veya akımı ile orantılıdır.

bağımsız ve bağımlı kaynaklar

Elektrik devrelerinde kaynaklar, devrenin çalışması için güç sağlamada çok önemli bir rol oynar. Bu kaynaklar genel olarak iki türe ayrılabilir: bağımsız ve bağımlı.

Bağımsız gerilim veya akım kaynakları, devre içindeki diğer elemanlardan etkilenmeyen, sırasıyla sabit miktarda gerilim veya akım sağlar. Bunlar belirli semboller kullanılarak temsil edilir. Bağımsız gerilim kaynakları, potansiyel farkın yönünü gösteren polaritelerle (+ ve -) sembolize edilirken, bağımsız akım kaynakları, akım akışının yönünü belirtmek için oklar kullanır.

Bağımsız kaynakların ilginç bir yönü, kısa devrenin sıfır gerilimden bağımsız bir gerilim kaynağı olarak kabul edilebilmesidir çünkü akımın gerilim düşüşü olmadan serbestçe akmasına izin verir. Tersine, açık devre, uygulanan gerilimden bağımsız olarak herhangi bir akım akışını önlediği göz önüne alındığında, sıfır akımdan bağımsız bir akım kaynağı olarak düşünülebilir.

Bağımlı kaynaklar ise değerleri aynı devre içindeki diğer elemanlar tarafından kontrol edilen gerilim veya akım üreteçleridir. Devre şemalarında elmas şekli ile gösterilirler.

Bu bağımlı kaynaklar ayrıca kontrol etme kabiliyetlerine ve kontrol edilen kısımlarına göre dört kategoriye ayrılır: gerilim kontrollü gerilim kaynakları (VCVS), akım kontrollü gerilim kaynakları (CCVS), gerilim kontrollü akım kaynakları (VCCS) ve akım kontrollü akım kaynakları (CCCS).

Örneğin, bağımlı bir kaynağın gerilim çıkışının, bir dirençten geçen akım tarafından kontrol edildiği bir devrede, bu dirençle seri olarak bir kısa devre eklenirse, kontrol akımı kısa devredeki akıma eşdeğer hale gelir. Kaynak geriliminin kontrol akımına oranı, bağımlı kaynağın kazancını temsil eder.

Benzer şekilde kontrol gerilimi de açık devre gerilimi olarak düşünülebilir. Bu, bağımlı kaynakların gerilimini veya akımının kontrol gerilimi veya akımıyla orantılı olduğu anlamına gelir.

Bağımsız ve Bağımlı Kaynaklar

Bir devredeki kaynaklar bağımsız veya bağımlı olabilir.
Bağımsız voltaj veya akım kaynakları, diğer devrelerden etkilenmeyen besleme voltajı ve akımı...

Education

JoVE Core

Electrical Engineering

Elektrik Mühendisliği

Unit 1

Ünite 1

Basics of Electric Circuits

Elektrik Devrelerinin Temelleri

KEY TERMS AND CONCEPTS

TEMEL TERİMLER VE KAVRAMLAR

Independent and Dependent Sources

circuit source symbols and controls

Circuit sources in electrical circuits can be independent or dependent. They provide the power a circuit needs to operate. Independent voltage sources supply a fixed voltage, and independent current sources supply a fixed current. Their output does not change because of other parts in the circuit.

These sources use standard symbols in circuit diagrams. An independent voltage source is shown with + and - signs to mark the potential difference. An independent current source is shown with an arrow to show the direction of current flow. A short circuit can be treated as a zero-voltage independent voltage source because it allows current to flow with no voltage drop. An open circuit can be treated as a zero-current independent current source because it blocks current flow even when voltage is applied.

Dependent sources work differently. Their voltage or current is controlled by another element in the same circuit. They are drawn with a diamond shape. There are four types: voltage-controlled voltage sources, current-controlled voltage sources, voltage-controlled current sources, and current-controlled current sources.

The controlling part can be tied to a resistor or another circuit element. For example, if the output voltage of a dependent source is controlled by the current through a resistor, adding a short circuit in series with that resistor makes the controlling current the same as the current in the short circuit. The ratio of the source voltage to the controlling current gives the gain of the dependent source. In a similar way, the controlling voltage can be treated as an open-circuit voltage. This means the voltage or current from a dependent source is proportional to the controlling voltage or current.

Circuit Source Symbols and Controls

charge and current

Electric Charge in Circuits

Electric charge in circuits explains how charged particles behave in matter and how current is produced. Everyday static effects, like a wool sweater sticking to the body or a shock from a carpet, show charge in action. Charge is an inherent property of atomic particles and is measured in coulombs (C). Matter is made of atoms with electrons, protons, and neutrons. Electrons carry a negative charge (-e), and protons carry a positive charge (+e). These two charges have the same magnitude. An...

voltage

Voltage in Electric Circuits

Voltage in electric circuits is the energy needed to move electric charge between two points. It is also called electromotive force, or EMF. In most circuits, an external force such as a battery provides this energy for electron movement in a conductor. The voltage between points a and b is written as v_ab. It is defined as the work, or energy, needed to move a unit charge from point a to point b. In the equation, w is the energy in joules and q is the charge in coulombs. Voltage is measured...

power and energy

Circuit Power, Absorption, and Supply

Circuit power, absorption, and supply explain how much energy an element uses or delivers in an electric circuit. These ideas matter in electrical engineering because power and energy calculations help describe circuit behavior. A 100-watt light bulb, for example, emits more light than a 60-watt bulb, so wattage is a useful measure in real devices. Power is the time rate of expending or absorbing energy. It is measured in watts, written as W. The relation between power and energy uses the...

electric circuit elements

Circuit Elements: Passive, Active, and Linear

Circuit elements are the building blocks of an electric circuit. An electric circuit is the connection of these elements. In this context, circuit elements are often grouped by how they behave and whether they supply energy. One major group is passive elements. These elements do not generate energy. Common passive elements include resistors, capacitors, and inductors. The other group is active elements, which can generate energy. Generators, batteries, and operational amplifiers are typical...

circuit terminology

Circuit Parts: Branches, Nodes, and Loops

Circuit parts like branches, nodes, loops, and meshes help describe how electrical networks work. An electrical network is a system of connected elements, such as resistors, capacitors, inductors, and voltage or current sources. Unlike a circuit, a network does not have to form a closed path. A circuit is also made of connected electrical elements, but it must include one or more closed paths. These loops let current flow continuously, which is what makes the circuit operate. Because of this,...

independent and dependent sources

Circuit sources in electrical circuits can be independent or dependent. They provide the power a circuit needs to operate. Independent voltage sources supply a fixed voltage, and independent current sources supply a fixed current. Their output does not change because of other parts in the circuit. These sources use standard symbols in circuit diagrams. An independent voltage source is shown with + and - signs to mark the potential difference. An independent current source is shown with an...

ohm's law

Resistance and Conductance in Circuits

Resistance and conductance help explain how electric current moves through a circuit. Resistors are basic circuit parts made from metallic alloys or carbon compounds. They are used to model how a material resists current and to control and regulate electrical power in a circuit. Ohm's law describes the link between voltage and current across a resistor. The voltage across a resistor is directly proportional to the current through it. The constant that sets this relationship is resistance.

kirchhoff's current law

Kirchhoff's Current Law at Circuit Nodes

Kirchhoff's Current Law explains how current behaves at a circuit node. A node is the point where two or more circuit elements meet. The law says the current entering a node equals the current leaving it. That balance follows the rule of charge conservation, which means electric charge is not lost at the junction. When applying KCL, currents entering the node are treated as positive and currents leaving the node are treated as negative. The currents can be added algebraically at the node, and...

kirchhoff's voltage law

Voltage Balance in Closed Circuit Loops

Kirchhoff's Voltage Law explains how voltage is balanced in a closed circuit loop. It is a basic rule in electrical engineering and comes from the idea of energy conservation. Energy can change form, but it cannot be created or destroyed. KVL states that the algebraic sum of all voltages around a closed path, or loop, is zero. In other words, the total voltage supplied in a loop equals the total voltage drop across the components in that loop. A loop can be traced clockwise or anticlockwise,...

voltage dividers

Series Resistors and Voltage Split

Series resistors split voltage across a circuit. In a series setup, resistors are linked one after another. The same current flows through each resistor in the chain. To analyze this behavior, Ohm's law is used to relate voltage, current, and resistance. Kirchhoff's voltage law says the voltages around a series loop add up to the source voltage. That means the current in the circuit equals the source voltage divided by the total resistance in series. The current value can then be used in Ohm's...

current dividers

Parallel Resistors and Current Division

Parallel resistors share the same two nodes, so each resistor has the same voltage across it. In this circuit setup, Kirchhoff's current law applies. The source current equals the sum of the currents through each branch. Ohm's law helps find the branch currents from the source voltage and the resistor values. The source current is equal to the source voltage times the sum of the reciprocals of the resistances. This makes it easier to calculate how current divides in the circuit. The current...

equivalent resistance

Delta-Wye Network Conversion

Delta-wye network conversion helps analyze resistor circuits that are not arranged in simple series or parallel paths. These three-terminal equivalent networks use the wye (Y), also called tee (T), and the delta (Δ), also called pi (π), as practical circuit models. These networks are useful in many circuit settings. They appear in three-phase electrical systems, electrical filters, and matching networks. They can also be used on their own or combined with more complex circuits. A delta...

design example: resistive touchscreen

Resistive Touchscreen Voltage Mapping

A resistive touchscreen uses voltage mapping to locate a finger touch on a mobile device. It is built from two metallic layers. The top layer is flexible, and the bottom layer is rigid. A narrow gap separates them, and the high resistance between the layers is an important part of the design. When a user touches the screen, the two layers meet at one point. That contact point is called the touchpoint. The touch lowers the resistance between the layers at that spot and changes the electrical...

key terms and concepts

Learn how independent and dependent sources work in circuits, how they are drawn, and how control by voltage or current determines dependent source gain.

Circuit Source Symbols and Controls | JoVE K12

JoVE Core Elektrik Mühendisliği, devre analizi teknikleriyle birlikte elektrik devrelerinin temel kavramlarını kapsayan, anlaşılması kolay animasyonlu videolar sunar. Operasyonel amplifikatörler ve devre dönüşümü kavramlarını kullanarak birinci dereceden ve ikinci dereceden devreleri içerir. Pratik tasarım örneklerinin ve gerçek dünya uygulamalarının bilim insanlarınca hazırlanan videolar aracılığıyla dahil edilmesi, karmaşık kavramları erişilebilir hale getirerek önemli bir eğitim değeri katmaktadır.

electrical engineering

Circuit Source Symbols and Controls

Description

Transcript

Tags