Name: how gravity acts between objects
Uploaded: 2025-05-22T09:06:17.000Z
Duration: 1 min 16 s
Channel: JoVE

Ay'ın Dünya etrafındaki dönüşü, onu yörüngenin merkezine doğru çeken bir kuvvetin varlığını gösterir.
Issac Newton, bu çekici kuvvetin bir elmayı yere doğru çeken kuvvetle aynı olduğunu öne sürdü.
Bu devrim niteliğinde bir fikirdi, çünkü Dünya'daki gök cisimlerinin ve nesnelerin farklı kurallara uyduğuna inanılıyordu.
Ay'ın Dünya'nın yörüngesinde dönmesi 27.3 gün sürer. Ay'a olan ortalama mesafe göz önüne alındığında, ivmesi tahmin edilebilir. 
Ay ivmesinin Dünya'ya düşen bir cismin ivmesine oranı, ivmenin mesafenin karesi ile ters orantılı olduğunu gösterir.
Kuvvet kütle çarpı ivme olduğundan, yerçekimi kuvveti kütle ile doğru orantılıdır ve mesafenin karesi ile ters orantılıdır.
Gezegenlerin ivmelerinin Güneş'e olan uzaklıkları ile ters orantılı olarak azaldığını gözlemleyen Newton, yerçekimi kuvvetinin Güneş, gezegenler ve uyduları arasında hareket ettiğini tahmin etti.
Bu argümanı evrendeki tüm nesnelere genişleten Newton, evrensel yerçekimi yasasını formüle etti.

<ol>
	<li>Verma, H.C. (2008). Fizik kavramları. Cilt 1, Bharati Bhawan Pub. & Dis.: bölüm 11.1 ve 11.2; sayfa 203–204.</li>
</ol>

yerçekimi kuvveti

Newton'dan önce, gökteki nesnelerin yeryüzündeki nesnelerden farklı kurallara tabi olduğuna dair genel bir inanış vardı. Kepler gezegenlerin Güneş etrafındaki yörüngelerinin geometrik özelliklerini ayrıntılı olarak açıklayarak üç gezegen hareketi yasası yazdığında, onların daha temel kurallarla ilişkisini anlamak için hemen bir fikir yoktu. İsaac Newton 1665-1666 yıllarında gezegen hareketi ile ayın yeryüzü etrafındaki hareketi ve nesnelerin yeryüzüne düşmesi gibi günlük fenomen arasındaki bağlantıyı çözen kişi oldu. Bu evrensel fenomen bugün gravitasyon olarak bilinmektedir.

Bugün yaygın bir kavram olmasına rağmen, aynı fenomenin hem yeryüzündeki nesnelerin hareketini hem de ayın yeryüzü etrafındaki hareketini yönettiği ifadesi Newton'un zamanında devrim niteliğindeydi. Ay'ın merkezcil ivmesinin ve yerçekimi ivmesinin, ilgili nesnenin yeryüzünden olan mesafesinin karesine ters orantılı bir orana sahip olduğunu ortaya koydu. Hareketin kütleyle bağımsız olduğuna göre, kuvvet kütleye orantılı olmalıdır, Newton'un hareket kanunlarına göre. Bu fikir onu kendi adını taşıyan gravitasyon yasası formüle etmeye yönlendirdi.

Newton'un gravitasyon yasası tamamlamak için gereken başka bir bilgi, deneysel olarak elde edilen kütleçekim sabittir. Sabitin değeri bilindiğinde, Newton'un hareket kanunlarıyla birlikte Kepler'in gezegen hareketi kanunları türetilebilir.

Yerçekimi kuvveti

Newton'dan önceki yıllarda, gökyüzündeki nesneleri Dünya'daki nesnelerden farklı yasaların yönettiğine dair genel bir inanç hakimdi. Kepler yazdığında ...

/files/media/science-education/science-education-thumbs/14716.jpg

Education

JoVE Core

Mechanical Engineering

Makine Mühendisliği

Unit 1

Ünite 1

Physics Basics

Fiziğin Temelleri

KEY TERMS AND CONCEPTS

TEMEL TERİMLER VE KAVRAMLAR

Gravitational Force

how gravity acts between objects

Gravity is a force that pulls objects toward one another. On Earth, this force gives objects weight and keeps people, water, and other materials from drifting away. It also helps explain why planets and moons stay in motion around larger bodies.

The strength of gravitational force depends on the masses of the objects involved. Larger masses create a stronger pull, while smaller masses create a weaker one. The distance between objects also matters, because gravity becomes weaker as objects move farther apart.

Students can use this relationship to understand motion in space and on Earth. Gravity acts between all objects with mass, even when the effect is hard to notice. That makes it an important force in both everyday life and the study of the solar system.

How Gravity Acts Between Objects

introduction to scalers

Scalar Quantities in Physics

Scalar quantities in physics have size only. They do not include direction. This makes them different from vector quantities. Common scalar examples include mass, temperature, time, and energy. Each one can be described with a number and a unit. Because direction is not part of the value, scalars are often easier to compare and measure.

vector or cross product

Cross Product of Two Vectors

The cross product of two vectors gives a new vector that is related to both original vectors. It is also called the vector product. In many physics problems, this operation helps describe quantities that depend on direction as well as size. The result of a cross product has a direction set by the two input vectors. It is not the same as ordinary multiplication. The transcript focuses on the vector or cross product as a core vector operation students use when working with vectors in science.

introduction to vectors

Vectors in Motion and Direction

Vectors describe quantities that have both size and direction. They are used in physics to show how motion, force, and other quantities act in space. A vector can be represented with an arrow. The length of the arrow shows the size, and the arrowhead shows the direction. This makes vectors useful for comparing how one quantity points relative to another. Scalars are different because they have size only and no direction. Understanding the difference between vectors and scalars is an important...

units and standards of measurement

Measurement Units, Standards, and SI Basics

Measurement units, standards, and SI basics help scientists describe physical quantities clearly. A unit gives a number meaning, while a standard provides a fixed reference for that measurement. Together, they make results easier to compare and understand. The International System of Units, or SI, is the most common measurement system in science. It uses agreed-upon base units for common quantities. These standards reduce confusion when measurements are shared across labs, classrooms, and...

accuracy and precision

Measurement Errors, Accuracy, and Precision

Measurement errors can affect how close a result is to the true value and how consistent repeated results are. Accuracy describes how close a measurement is to the accepted or true value. Precision describes how close repeated measurements are to one another. A result can be accurate, precise, both, or neither. A set of measurements may cluster tightly together and still be far from the true value. Another set may include values spread out from one another, even if one of them is close to the...

rules of significant figures

Counting Significant Figures in Measurements

Significant figures help students record measurements with the correct level of precision. They show which digits in a number are meaningful and which only help place the decimal point. In science class, this idea matters when writing and comparing measured values. The rules for significant figures explain how to count these digits in different numbers. Some digits are always counted, while others depend on where they appear in the number. Learning the rules makes it easier to report answers...

random and systematic errors

Measuring Error in Scientific Data

Random and systematic errors affect scientific measurements. Random errors cause values to spread around the true value. They make repeated measurements less consistent. Systematic errors shift measurements in the same direction each time. Understanding both kinds of error helps students judge data quality. Random error can come from small changes during measurement. Systematic error can come from a biased tool or method. Scientists look for these patterns so they can improve results and...

position and displacement

Tracking Motion with Position and Displacement

Position and displacement are key ideas in straight-line motion. Position tells where an object is located compared with a chosen starting point, called the origin. Displacement describes how far and in what direction the object has moved from its starting position. These ideas help describe motion clearly. Position can change as an object moves. Displacement focuses on the change in position, not just the path taken. That makes it useful for comparing motion in a simple and precise way.

position and displacement vectors

Using Vectors to Describe Motion

Position and displacement vectors describe motion in physics. A position vector shows where an object is located relative to a chosen origin. A displacement vector shows how far and in what direction the object moves from one point to another. These vectors are useful because they give a clear way to track movement in space. The video connects position and displacement to the idea of a reference point and shows how direction matters as much as distance. That makes them important for describing...

mass and weight

How Mass Differs from Weight

Mass and weight are related, but they are not the same. Mass is the amount of matter in an object. Weight is the force of gravity acting on that object. This difference matters because mass stays the same even when gravity changes. Weight can change if the gravitational pull changes. A person or object therefore has the same mass, but not always the same weight. The terms are often used in everyday speech as if they mean the same thing. In physics, they describe two different ideas.

acceleration due to gravity on earth

Free-Fall Acceleration on Earth

Free-fall acceleration on Earth describes how fast an object speeds up when gravity is the only force acting on it. Near Earth’s surface, this acceleration is nearly constant for many everyday situations. Gravity pulls objects toward Earth and gives them downward acceleration. This motion is often written as g, and it helps explain why falling objects gain speed as they move downward. The value of g is commonly used in physics to predict the motion of objects dropped or released near the...

tension

Tension in Ropes and Strings

Tension is the pulling force carried by a rope, string, or cable when it is stretched by a load. In physics, this force acts along the length of the object and pulls away from the objects at each end. A stretched rope can support a hanging mass because the tension in the rope balances the weight of the load. The same idea appears in many everyday situations, such as a cable holding a sign or a string lifting an object. Understanding tension helps students connect force diagrams to real motion.

gravitational force

Gravity is a force that pulls objects toward one another. On Earth, this force gives objects weight and keeps people, water, and other materials from drifting away. It also helps explain why planets and moons stay in motion around larger bodies. The strength of gravitational force depends on the masses of the objects involved. Larger masses create a stronger pull, while smaller masses create a weaker one. The distance between objects also matters, because gravity becomes weaker as objects move...

key terms and concepts

Learn how gravitational force depends on mass and distance, and how gravity affects weight, motion on Earth, and the movement of planets and moons.

How Gravity Acts Between Objects | JoVE K12

JoVE Core Makine Mühendisliği, denge, kuvvetler, kafes kiriş analizi ve yapısal mekanik gibi temel konuları kapsayan kısa, anlaşılması kolay animasyonlu videolar sunar. Gerçek dünyadaki uygulamalarını keşfedin ve bilim insanlarının önderlik ettiği deneylerle bu kavramların uygulanmasına tanık olun.

mechanical engineering

How Gravity Acts Between Objects

Description

Transcript

Tags