Name: beam deflection using moment-area rules
Uploaded: 2024-05-23T13:00:02.000Z
Duration: 1 min 17 s
Channel: JoVE

Moment-alan teoremi, bir bina zeminini destekleyen kiriş üzerindeki herhangi bir noktada sapma ve eğimi belirlemek için elastik bir eğrinin geometrik özelliklerini sağlar.
Kirişin uzunluğu boyunca çizildiğinde, M/EI oranı eğilme momenti diyagramına benzer bir diyagram oluşturur.
Moment-alan teoremi, eğim ve teğetsel sapma denklemini kiriş diyagramından türetir. İlk moment-alan teoremi, P ve Q noktalarındaki teğetler arasındaki açıyı, M/EI diyagramı altında bu noktalar arasındaki alana eşitler.
İkinci moment-alan teoremi, P noktasının Q'dan teğetsel sapmasını, P üzerinden dikey eksen ile ilgili aynı alanın ilk momentine bağlar.
Bu teorem aynı zamanda alanın çarpımı ve alanın merkezinden P üzerinden dikey eksene olan mesafe cinsinden de ifade edilebilir.
Teğetsel sapma, Q'dan P'deki teğete olan dikey mesafedir. M/EI diyagramının altındaki alanın, merkez noktasından Q aracılığıyla dikey eksene olan mesafe ile çarpılmasıyla hesaplanır.

moment-alan teoremleri

Moment-Alan Teoremi, yapı mühendisliğinde, özellikle bina zemin destekleri gibi uygulamalarda kiriş bükülmesini analiz etmek için çok önemlidir. Bu teorem, sapma ve eğim hesaplamalarını basitleştirmek için bir kirişin yük altında nasıl deforme olduğunu gösteren elastik eğrinin geometrik özelliklerinden yararlanır.

Teorem iki bölüme ayrılmıştır. İlk kısım, kirişin elastik eğrisi üzerindeki herhangi iki noktadaki teğetler arasındaki açıyı, M/EI miktarının grafiğini çizerek elde edilen eğri altındaki alana (burada M bükülme momentidir, E esneklik modülüdür ve I atalet momentidir) kirişin uzunluğu boyunca sapmasına karşı bağlar. Bu eğrinin altındaki alan doğrudan bu iki nokta arasında meydana gelen toplam dönmeye karşılık gelir.

Teoremin ikinci kısmı, kirişin bükülmesinden kaynaklanan herhangi iki nokta arasındaki teğetsel sapmayı veya dikey yer değiştirmeyi ele alır. Bu sapmanın, bu noktalardan biri boyunca dikey bir eksen etrafında M/EI eğrisi altındaki alanın ilk momentine eşdeğer olduğunu belirtir ve kiriş bölümünün orijinal konumundan yer değiştirmesinin bir ölçüsünü sağlar. Bu teoremler, yapısal güvenliği ve yük altında performansı sağlamak için gerekli olan, kiriş boyunca çeşitli noktalardaki eğimi ve sapmayı etkin bir şekilde belirler.

Moment-Alan Teoremleri

Moment-alan teoremi, kiriş üzerindeki herhangi bir noktada sapma ve eğimi belirlemek için elastik bir eğrinin geometrik özelliklerini sağlar.

Education

JoVE Core

Mechanical Engineering

Makine Mühendisliği

Unit 1

Ünite 1

Deflection of Beams

Kirişlerin Sehimleri

KEY TERMS AND CONCEPTS

TEMEL TERİMLER VE KAVRAMLAR

Moment-Area Theorems

beam deflection using moment-area rules

The moment-area theorems help describe beam bending in structural engineering. They are often used for building floor supports and other beams under load. The theorems use the elastic curve, which is the shape a beam takes as it deforms.

The first theorem links slope change to area on an M/EI diagram. Here, M is the bending moment, E is the modulus of elasticity, and I is the moment of inertia. When M/EI is plotted along the beam length, the area under the curve gives the total rotation between two points on the elastic curve.

The second theorem deals with tangential deviation, or vertical displacement, between two points. It says this distance equals the first moment of the area under the M/EI curve about a vertical axis through one of the points. Together, the two theorems make it easier to find slope and deflection at different points along a beam. That information helps engineers check structural safety and performance under load.

Beam Deflection Using Moment-Area Rules

deformation of a beam under transverse loading

deformation-of-a-beam-under-transverse-loading

Beam Deflection from Loads and Supports

Beam deflection depends on the loads on a beam and the support conditions at its ends. For indeterminate beams, especially those with overhanging parts and multiple concentrated loads, careful analysis is needed to predict how the beam will bend. The first step is to draw an accurate free-body diagram. A free-body diagram shows the forces and moments acting on the beam. It helps reveal how the bending moment changes along the beam length. The bending moment diagram also shows how the beam...

equation of the elastic curve

Beam Deflection and Boundary Conditions

Beam deflection and boundary conditions help describe how a beam bends under load. In structural engineering, the curvature of a plane curve shows how sharply the beam bends. That curvature is found from the curve’s first and second derivatives. A cantilever beam with a point load at its free end is a common example. A diving board works like this type of beam. When slopes are small, the beam’s elastic curve becomes the main shape used in the analysis. The governing equation connects bending...

elastic curve from the load distribution

Beam Deflection Under Distributed Load

Beam deflection under distributed load is a key part of beam analysis in engineering. It helps predict how a beam bends and reacts when a load is spread along its length. Engineers use this relationship to judge whether a structure will stay safe and functional. The analysis starts with the link between load, shear force, and bending moment. These quantities can be written in differential form. When beam flexibility is treated as constant, further differentiation leads to a higher-order...

deflection of a beam

Beam Slope and Deflection by Singularity

Beam slope and deflection can be found with singularity functions when beam loading is hard to write as one simple equation. This method is useful in structural engineering because it helps describe beams under several loads without breaking the problem into many separate cases. Singularity functions are mathematical tools for showing discontinuities in a load, shear force, or bending moment equation. They are especially helpful when a load acts at a single point or over a set interval. In the...

method of superposition

Beam Deflection Under Combined Loads

Beam deflection under combined loads can be found with the method of superposition. This structural engineering method is used to analyze how multiple loads affect a beam. It works by finding the slope and deflection from each load separately, then adding those results together. The method applies only when the beam stays within its elastic limit. In that range, the material deforms in a linearly elastic way. That makes it valid to combine the effects of separate loads without changing the...

moment-area theorems

The moment-area theorems help describe beam bending in structural engineering. They are often used for building floor supports and other beams under load. The theorems use the elastic curve, which is the shape a beam takes as it deforms. The first theorem links slope change to area on an M/EI diagram. Here, M is the bending moment, E is the modulus of elasticity, and I is the moment of inertia. When M/EI is plotted along the beam length, the area under the curve gives the total rotation...

beams with symmetric loadings

Moment-Area Method for Cantilever Deflection

The moment-area method is used in structural engineering to find the slope and deflection of a beam under load. It is especially useful for a cantilever beam with a concentrated load and a moment at the free end. The analysis begins with a free-body diagram. This diagram helps calculate the reactions at the fixed end. After that, the bending moment diagram is drawn to show how the bending moment changes along the beam. Points where the bending moment is zero are important in this step. Next,...

beams with unsymmetric loadings

Beam Deflection and Level Points

Beam deflection and level points can be found for a supported beam under unsymmetrical loadings using moment-area theorems. This type of analysis helps show how a beam bends when forces are spread unevenly along it. It is an important part of structural engineering because it links load patterns to beam response. The first moment-area theorem is used to find the slope at any point on the beam. It states that the change in slope between two points equals the area under the moment diagram over...

maximum deflection

Locating the Beam’s Highest Deflection

Maximum deflection in a supported beam depends on where the load is placed. With an unsymmetrical load, such as a train moving across a bridge, the beam may bend most at a point that is not the midpoint. Finding that point is important for judging stress and deflection in the structure. The point of maximum deflection is called point O. At point O, the tangent to the deflection curve is horizontal. That means the slope is zero there. To locate point O, the slope at any point X along the beam...

key terms and concepts

Learn how the moment-area theorems use the elastic curve and M/EI diagram to find beam slope, rotation, and deflection in structural engineering.

Beam Deflection Using Moment-Area Rules | JoVE K12

JoVE Core Makine Mühendisliği, denge, kuvvetler, kafes kiriş analizi ve yapısal mekanik gibi temel konuları kapsayan kısa, anlaşılması kolay animasyonlu videolar sunar. Gerçek dünyadaki uygulamalarını keşfedin ve bilim insanlarının önderlik ettiği deneylerle bu kavramların uygulanmasına tanık olun.

mechanical engineering

Beam Deflection Using Moment-Area Rules

Description

Transcript

Tags