Biosensing Techniques:
Any of a variety of procedures which use biomolecular probes to measure the presence or concentration of biological molecules, biological structures, microorganisms, etc., by translating a biochemical interaction at the probe surface into a quantifiable physical signal.
JoVE Bioengineering
Biosensor for Detection of Antibiotic Resistant Staphylococcus Bacteria
1Department of Anatomy, Physiology and Pharmacology, College of Veterinary Medicine, Auburn University, 2Clinical Research Laboratory, 81st Medical Group, Keesler Air Force Base
Lytic phage biosensors and antibody beads are able to discriminate between methicillin resistant (MRSA) and sensitive staphylococcus bacteria. The phages were immobilized by a Langmuir-Blodgett method onto a surface of a quartz crystal microbalance sensor and worked as broad range staphylococcus probes. Antibody beads recognize MRSA.
JoVE Neuroscience
Simultaneous Electroencephalography, Real-time Measurement of Lactate Concentration and Optogenetic Manipulation of Neuronal Activity in the Rodent Cerebral Cortex
A procedure is described for manipulating the activity of cerebral cortical pyramidal neurons optogenetically while the electroencephalogram, electromyogram, and cerebral lactate concentration are monitored. Experimental recordings are performed on cable-tethered mice while they undergo spontaneous sleep/wake cycles. Optogenetic equipment is assembled in our laboratory; recording equipment is commercially available.
JoVE Bioengineering
Bacterial Detection & Identification Using Electrochemical Sensors
1Research Service, Veterans Affairs Greater Los Angeles Healthcare System, 2Department of Urology, The David Geffen School of Medicine, University of California, Los Angeles, 3GeneFluidics, 4Division of Infectious Diseases, Veterans Affairs Greater Los Angeles Healthcare System, 5Department of Microbiology, Immunology & Molecular Genetics, University of California, Los Angeles
We describe an electrochemical sensor assay method for rapid bacterial detection and identification. The assay involves a sensor array functionalized with DNA oligonucleotide capture probes for ribosomal RNA (rRNA) species-specific sequences. Sandwich hybridization of target rRNA with the capture probe and a horseradish peroxidase-linked DNA oligonucleotide detector probe produces a measurable amperometric current.
JoVE General
FRET Microscopy for Real-time Monitoring of Signaling Events in Live Cells Using Unimolecular Biosensors
Förster resonance energy transfer (FRET) microscopy is a powerful technique for real-time monitoring of signaling events in live cells using various biosensors as reporters. Here we describe how to build a customized epifluorescence FRET imaging system from commercially available components and how to use it for FRET experiments.
JoVE Bioengineering
Fabrication of Electrochemical-DNA Biosensors for the Reagentless Detection of Nucleic Acids, Proteins and Small Molecules
1Department of Chemistry and Biochemistry, University Of California Santa Barbara, 2Department of Chemistry and Biochemistry, Program in BioMolecular Science and Engineering, University Of California Santa Barbara
"E-DNA" sensors, reagentless, electrochemical biosensors that perform well even when challenged directly in blood and other complex matrices, have been adapted to the detection of a wide range of nucleic acid, protein and small molecule analytes. Here we present a general procedure for the fabrication and use of such sensors.
JoVE Bioengineering
Biomolecular Detection employing the Interferometric Reflectance Imaging Sensor (IRIS)
1Department of Electrical and Computer Engineering, Boston University, 2Department of Biomedical Engineering, Boston University, 3Center for Advanced Genomics Technology, Boston University, 4Department of Medicine, Section of Infectious Diseases, Boston University School of Medicine, 5Department of Microbiology, Boston University School of Medicine, 6CNR (National Research Council), Istituto di Chimica del Riconoscimento Molecolare
Quantitative, high-throughput, real-time, and label-free biomolecular detection (DNA, protein, etc.) on SiO2 surfaces can be achieved using a simple interferometric technique which relies on LED illumination, minimal optical components, and a camera. The Interferometric Reflectance Imaging Sensor (IRIS) is inexpensive, simple to use, and amenable to microarray formats.
JoVE General
Live Imaging of Cell Motility and Actin Cytoskeleton of Individual Neurons and Neural Crest Cells in Zebrafish Embryos
1Genetics Training Program, University of Wisconsin-Madison, 2Department of Anatomy, University of Wisconsin-Madison, 3Department of Zoology, University of Wisconsin-Madison, 4Cell and Molecular Biology Training Program, University of Wisconsin-Madison
This protocol describes imaging of individual neurons or neural crest cells in living zebrafish embryos. This method is used to examine cellular behaviors and actin localization using fluorescence confocal time-lapse microscopy.
JoVE Bioengineering
Hollow Microneedle-based Sensor for Multiplexed Transdermal Electrochemical Sensing
1Joint Department of Biomedical Engineering, University of North Carolina and North Carolina State University, 2Department of Biosensors and Nanomaterials, Sandia National Laboratories
This article details the construction of a multiplexed microneedle-based sensor. The device is being developed for in situ sampling and electrochemical analysis of multiple analytes in a rapid and selective manner. We envision clinical medicine and biomedical research uses for these microneedle-based sensors.
JoVE General
The Importance of Correct Protein Concentration for Kinetics and Affinity Determination in Structure-function Analysis
We apply label-free protein interaction analysis using Biacore X100 for structure-function analysis of the binding of several cystatin B mutants to papain through kinetic characterization. Calibration-free concentration analysis (CFCA) measures the concentration of protein with retained binding activity without the need for a standard curve. We show that confirmation of concentrations using CFCA increases the reliability of the kinetic analysis and that kinetic constants can reliably be determined even if the activity of a recombinant protein is reduced.
JoVE Bioengineering
Synthesis, Assembly, and Characterization of Monolayer Protected Gold Nanoparticle Films for Protein Monolayer Electrochemistry
1Department of Chemistry, Gottwald Center for the Sciences, University of Richmond, 2Department of Biochemistry and Molecular Biology, Gottwald Center for the Sciences, University of Richmond
Alkanethiolate stabilized gold colloids known as monolayer protected clusters (MPCs) are synthesized, characterized, and assembled into thin films as an adsorption interface for protein monolayer electrochemistry of simple redox protein like Pseudomonas aeruginosa azurin (AZ) and cytochrome c (cyt c).
JoVE Applied Physics
Synthesis and Operation of Fluorescent-core Microcavities for Refractometric Sensing
Department of Physics, University of Alberta
Fluorescent-core microcavity sensors employ a high-index quantum-dot coating in the channel of silica microcapillaries. Changes in the refractive index of fluids pumped into the capillary channel cause shifts in the microcavity fluorescence spectrum that can be used to analyze the channel medium.
JoVE Applied Physics
Hyperpolarized Xenon for NMR and MRI Applications
ERC Project BiosensorImaging, Leibniz-Institut für Molekulare Pharmakologie
The production of hyperpolarized xenon by means of spin exchange optical pumping (SEOP) is described. This method yields a ~10000-fold enhancement of the nuclear spin polarization of Xe-129 and has applications in nuclear magnetic resonance spectroscopy and imaging. Examples of gas phase and solution state experiments are given.
JoVE Immunology and Infection
Detection of Bacteria Using Fluorogenic DNAzymes
1Department of Biochemistry and Biomedical Sciences, McMaster University, 2Department of Chemistry and Chemical Biology, McMaster University
We have recently reported a novel approach for generating fluorogenic DNAzyme probes that can be applied to set up a simple, "mix-and-read" fluorescent assay for bacterial detection. These special DNA probes catalyze the cleavage of a chromophore-modified DNA-RNA chimeric substrate in the presence of crude extracellular mixture (CEM) produced by a specific bacterium, thereby translating bacterial detection into fluorescence signal generation. In this report we will describe key experimental procedures where a specific DNAzyme probe denoted "RFD-EC1" is employed for the detection of the model bacterium, Escherichia coli (E. coli).
JoVE Bioengineering
Attaching Biological Probes to Silica Optical Biosensors Using Silane Coupling Agents
Department of Biological Engineering, University of Missouri
Biosensors interface with complex, biological environments and perform targeted detection by combining highly sensitive sensors with highly specific probes attached to the sensor via surface modification. Here, we demonstrate the surface functionalization of silica optical sensors with biotin using silane coupling agents to bridge the sensor and the biological environment.
JoVE General
Procedure for Fabricating Biofunctional Nanofibers
1Department of Chemistry, Clark Atlanta University, 2Department of Physics, Clark Atlanta University, 3Department of Chemistry and Chemical Biology, Cornell University
An efficient approach for preparing nanofibers decorated with functional groups capable of specifically interacting with proteins is described. The approach first requires the preparation of a polymer functionalized with the appropriate functional group. The functional polymer is fabricated into nanofibers by electrospinning. The effectiveness of the binding of the nanofibers with a protein is studied by confocal microscopy.
JoVE General
Real-time Monitoring of Ligand-receptor Interactions with Fluorescence Resonance Energy Transfer
Department of Chemistry and Biochemistry, Southern Illinois University
We demonstrate FRET between conjugated polymer polydiacetylene (PDA) and fluorophore attached to the surface of PDA liposomes for the sensing of biomolecules. PDA liposomes also contained receptor molecules on their surfaces for biomolecules to be used as probes. Ligand-receptor interactions lead to changes in the FRET efficiency between the fluorophore and PDA which is the basis of the sensing mechanism.
JoVE General
A Fluorescence Microscopy Assay for Monitoring Mitophagy in the Yeast Saccharomyces cerevisiae
Department of Biochemistry and Molecular Biology, School of Biomedical Sciences, Monash University
A robust approach to monitor the delivery of organelles to the acidic lumen of the yeast vacuole for degradation and recycling is described. The method relies on the specific labeling of target organelles with a genetically encoded dual-emission fluorescence pH-biosensor, and visualization of individual cells using fluorescence microscopy.
JoVE General
Fluorescent Labeling of COS-7 Expressing SNAP-tag Fusion Proteins for Live Cell Imaging
Division of Chemical Biology, New England Biolabs
SNAP-tag and CLIP-tag protein labeling systems enable the specific, covalent attachment of molecules, including fluorescent dyes, to a protein of interest in live cells. Once cloned and expressed, the tagged protein can be used with a variety of substrates for numerous downstream applications without having to clone again.
JoVE General
High-throughput Screening and Biosensing with Fluorescent C. elegans Strains
1Department of Biology, University of Florida, 2Mount Desert Island Biological Laboratory
A procedure for liquid-based culturing and dispensing of C. elegans strains expressing fluorescent reporter proteins is described that does not require expensive sorting equipment. This approach can be applied to numerous inducible C. elegans genes for drug discovery or biosensing of contaminants.
JoVE Bioengineering
Multi-analyte Biochip (MAB) Based on All-solid-state Ion-selective Electrodes (ASSISE) for Physiological Research
1Department of Agricultural and Biological Engineering, Birck-Bindley Physiological Sensing Facility, Purdue University, 2NASA Ames Research Center, 3Department of Chemistry, Pennsylvania State University Hazleton, 4Cooley LLP, 5NASA Life and Physical Sciences, Human Exploration and Operations Mission Directorate, NASA Headquarters
All-solid-state ion-selective electrodes (ASSISEs) constructed from a conductive polymer (CP) transducer provide several months of functional lifetime in liquid media. Here, we describe the fabrication and calibration process of ASSISEs in a lab-on-a-chip format. The ASSISE is demonstrated to have maintained a near-Nernstian slope profile after prolonged storage in complex biological media.
JoVE General
A High-content Imaging Workflow to Study Grb2 Signaling Complexes by Expression Cloning
1MRC LMCB, University College London, 2Center for Computational and Integrative Biology, Massachusetts General Hospital
A high-content screening method for the identification of novel signaling competent transmembrane receptors is described. This method is amenable to large-scale automation and allows predictions about in vivo protein binding and the sub-cellular localization of protein complexes in mammalian cells.
JoVE Applied Physics
Fabrication of Silica Ultra High Quality Factor Microresonators
1Department of Chemical Engineering and Materials Science, University of Southern California, 2Department of Electrical Engineering-Electrophysics, University of Southern California
We describe the use of a carbon dioxide laser reflow technique to fabricate silica resonant cavities, including free-standing microspheres and on-chip microtoroids. The reflow method removes surface imperfections, allowing long photon lifetimes within both devices. The resulting devices have ultra high quality factors, enabling applications ranging from telecommunications to biodetection.
JoVE General
Antifouling Self-assembled Monolayers on Microelectrodes for Patterning Biomolecules
1Department of Physics, Texas A&M University (TAMU), 2Department of Biomedical Engineering, Texas A&M University (TAMU)
We present a procedure for forming a poly(ethylene glycol) self-assembled monolayer (PEG-SAM) on a silicon substrate with gold microelectrodes. The PEG-SAM is formed in a single step and prevents biofouling on silicon and gold surfaces. Electrophoresis is then used for patterning biomolecules down to the nanoscale.
JoVE Applied Physics
Optical Trapping of Nanoparticles
Electrical and Computer Engineering, University of Victoria
The following setup approach details low power optical trapping of dielectric nanoparticles using a double-nanohole in metal film.
JoVE Bioengineering
Creating Transient Cell Membrane Pores Using a Standard Inkjet Printer
Department of Bioengineering, Clemson University
A description of the methods used to convert an HP DeskJet 500 printer into a bioprinter. The printer is capable of processing living cells, which causes transient pores in the membrane. These pores can be utilized to incorporate small molecules, including fluorescent G-actin, into the printed cells.
JoVE General
Measurement of Cellular Chemotaxis with ECIS/Taxis
1Molecular and Cell Biology, University of Connecticut, 2University of Connecticut
The ECIS/Taxis system is an automated, real-time assay that measures cellular chemotaxis. In this assay, cells move beneath a layer of agarose to arrive at a target electrode. Cellular movement is measured by the onset of resistance to AC current 0.
JoVE General
Monitoring Kinase and Phosphatase Activities Through the Cell Cycle by Ratiometric FRET
Department of Cell and Molecular Biology, Karolinska Institutet
FRET-based reporters are increasingly used to monitor kinase and phosphatase activities in live cells. Here we describe a method on how to use FRET-based reporters to assess cell cycle-dependent changes in target phosphorylation.
JoVE Bioengineering
Bridging the Bio-Electronic Interface with Biofabrication
1Fischell Department of Bioengineering, University of Maryland, 2Institute for Bioscience and Biotechnology Research, University of Maryland, 3Department of Materials Science and Engineering, University of Maryland
This article describes a biofabrication approach: deposition of stimuli-responsive polysaccharides in the presence of biased electrodes to create biocompatible films which can be functionalized with cells or proteins. We demonstrate a bench-top strategy for the generation of the films as well as their basic uses for creating interactive biofunctionalized surfaces for lab-on-a-chip applications.
JoVE Bioengineering
Developing Custom Chinese Hamster Ovary-host Cell Protein Assays using Acoustic Membrane Microparticle Technology
1Biomarker Division, BioScale, Inc., 2Bioprocessing Division, BioScale, Inc.
Development of custom assays on the ViBE platform for more sensitive, reproducible, automated results in complex matrices is described. The universal cartridge allows assays to be easily adapted for use with custom assays. This versatility enables rapid development and validation of novel assays or automated versions of existing manual assays, exemplified in this video.
JoVE General
The use of Biofeedback in Clinical Virtual Reality: The INTREPID Project
1Applied Technology for Neuro-Psychology Lab, Istituto Auxologico Italiano, 2Psychology Department, Università Cattolica del Sacro Cuore
The Project on Virtual Reality Intelligent Multi-sensor System for the Treatment of Anxiety-related Disorders (INTREPID) is aimed at developing a multi-sensor context-aware virtual reality system for the treatment of anxiety-related disorders.
JoVE General
Rapid Homogeneous Detection of Biological Assays Using Magnetic Modulation Biosensing System
1Department of Physical Electronics, Faculty of Engineering, Tel Aviv University, 2Department of Biomedical Engineering, Washington University in St. Louis, 3Department of Biological Sciences, University of Illinois, 4Department of Cell Research and Immunology, Tel Aviv University
Magnetic modulation biosensing system is utilized to rapidly, sensitively and simply detect biological assays, such as DNA molecules and proteins.
JoVE Bioengineering
Time-lapse Fluorescence Imaging of Arabidopsis Root Growth with Rapid Manipulation of The Root Environment Using The RootChip
1Department of Plant Biology, Carnegie Institution for Science, 2Howard Hughes Medical Institute, 3Departments of Applied Physics and Bioengineering, Stanford University, 4Department of Microsystems Engineering (IMTEK) and Center for Biological Signaling Studies (BIOSS), University of Freiburg
This article provides a protocol for cultivation of Arabidopsis seedlings in the RootChip, a microfluidic imaging platform that combines automated control of growth conditions with microscopic root monitoring and FRET-based measurement of intracellular metabolite levels.
JoVE Chemistry
Template Directed Synthesis of Plasmonic Gold Nanotubes with Tunable IR Absorbance
Department of Chemistry, University of Toronto
Solution-suspendable gold nanotubes with controlled dimensions can be synthesized by electrochemical deposition in porous anodic aluminum oxide (AAO) membranes using a hydrophobic polymer core. Gold nanotubes and nanotube arrays hold promise for applications in plasmonic biosensing, surface-enhanced Raman spectroscopy, photo-thermal heating, ionic and molecular transport, microfluidics, catalysis and electrochemical sensing.
JoVE Bioengineering
Hydrophobic Salt-modified Nafion for Enzyme Immobilization and Stabilization
Departments of Chemistry and Materials Science and Engineering, University of Utah
This article will describe the procedure for synthesizing a hydrophobically modified Nafion enzyme immobilization membrane and how to immobilize proteins and/or enzymes within the membrane and test their specific activity.
JoVE General
Isolation and Genetic Manipulation of Adult Cardiac Myocytes for Confocal Imaging
Institute for Molecular Cell Biology, Universty of Saarland
Adult cardiac myocytes are primary cells that can be isolated from animal hearts and cultured for several days. Within this culture period adenoviral gene transfer can be used to express genetically encoded biosensors (GEBs) or fluorescent fusion proteins. Both approaches allow cellular investigations by means of confocal microscopy.
JoVE Bioengineering
Monitoring Protein Adsorption with Solid-state Nanopores
Department of Physics, Syracuse University
A method of using solid-state nanopores to monitor the non-specific adsorption of proteins onto an inorganic surface is described. The method employs the resistive-pulse principle, allowing for the adsorption to be probed in real-time and at the single-molecule level. Because the process of single protein adsorption is far from equilibrium, we propose the employment of parallel arrays of synthetic nanopores, enabling for the quantitative determination of the apparent first-order reaction rate constant of protein adsorption as well as and the Langmuir adsorption constant.
JoVE Bioengineering
High efficiency, Site-specific Transfection of Adherent Cells with siRNA Using Microelectrode Arrays (MEA)
School of Biological and Health Systems Engineering, Arizona State University
The article details the protocol for site-specific transfection of scrambled sequence of siRNA in an adherent mammalian cell culture using a microelectrode array (MEA).
JoVE General
Tangential Flow Ultrafiltration: A “Green” Method for the Size Selection and Concentration of Colloidal Silver Nanoparticles
1Department of Chemistry, Wright State University, 2Department of Neuroscience, Cell Biology, and Physiology, Wright State University
Tangential flow ultrafiltration (TFU) is a recirculation method used for the weight-based separation of biosamples. TFU was adapted to size-select (1-20 nm diameter) and highly concentrate a large volume of polydisperse silver nanoparticles (4 L of 15.2 μg ml-1 down to 4 ml of 8,539.9 μg ml-1) with minimal aggregation.
JoVE General
Chemically-blocked Antibody Microarray for Multiplexed High-throughput Profiling of Specific Protein Glycosylation in Complex Samples
1Institute for Hepatitis and Virus Research, 2Department of Microbiology and Immunology, Thomas Jefferson University, 3Drexel University College of Medicine, 4Van Andel Research Institute, 5Institute for Hepatitis and Virus Research, Serome Biosciences Inc.
In this study, we describe an improved protocol for a multiplexed high-throughput antibody microarray with lectin detection method that can be used in glycosylation profiling of specific proteins. This protocol features new reliable reagents and significantly reduces the time, cost, and lab equipment requirements as compared to the previous procedure.
JoVE Immunology and Infection
Detection of Toxin Translocation into the Host Cytosol by Surface Plasmon Resonance
Department of Molecular Biology and Microbiology, University of Central Florida
In this report, we describe how surface plasmon resonance is used to detect toxin entry into the host cytosol. This highly sensitive method can provide quantitative data on the amount of cytosolic toxin, and it can be applied to a range of toxins.
More Results...
