JoVE Bioengineering
High-throughput Protein Expression Generator Using a Microfluidic Platform
We present a microfluidic approach for the expression of protein arrays. The device consists of thousands of reaction chambers controlled by micro-mechanical valves. The microfluidic device is mated to a microarray-printed gene library. These genes are then transcribed and translated on-chip, resulting in a protein array ready for experimental use.
JoVE General
A Multi-compartment CNS Neuron-glia Co-culture Microfluidic Platform
1Department of Electrical and Computer Engineering, Texas A&M University (TAMU), 2Department of Veterinary Integrative Biosciences, Texas A&M University (TAMU)
We developed a novel multi-compartment neuron co-culture microsystem platform for in vitro CNS axon-glia interaction research. The platform is capable of conducting up to six independent experiments in parallel and was fabricated using a newly developed macro/micro hybrid fabrication method.
JoVE Bioengineering
Hollow Microneedle-based Sensor for Multiplexed Transdermal Electrochemical Sensing
1Joint Department of Biomedical Engineering, University of North Carolina and North Carolina State University, 2Department of Biosensors and Nanomaterials, Sandia National Laboratories
This article details the construction of a multiplexed microneedle-based sensor. The device is being developed for in situ sampling and electrochemical analysis of multiple analytes in a rapid and selective manner. We envision clinical medicine and biomedical research uses for these microneedle-based sensors.
JoVE Bioengineering
Microfabricated Platforms for Mechanically Dynamic Cell Culture
1Department of Mechanical and Industrial Engineering, University of Toronto, 2Institute of Biomaterials and Biomedical Engineering, University of Toronto, 3Faculty of Dentistry, University of Toronto
In this protocol, we demonstrate the fabrication of a microactuator array of vertically displaced posts on which the technology is based, and how this base technology can be modified to conduct high-throughput mechanically dynamic cell culture in both two-dimensional and three-dimensional culture paradigms.
JoVE General
Window on a Microworld: Simple Microfluidic Systems for Studying Microbial Transport in Porous Media
1Vanderbilt Institute for Integrative Biosystems Research and Education, Vanderbilt University, 2Department of Biomedical Engineering, Vanderbilt University, 3Department of Molecular Physiology and Biophysics, Vanderbilt University, 4Department of Physics and Astronomy, Vanderbilt University, 5Department of Chemical, Materials and Biomolecular Engineering, University of Connecticut, 6Center for Environmental Sciences and Engineering, University of Connecticut
Microfluidic devices can be used to visualize complex natural processes in real time and at the appropriate physical scales. We have developed a simple microfluidic device that mimics key features of natural porous media for studying growth and transport of bacteria in the subsurface.
JoVE General
Digital Microfluidics for Automated Proteomic Processing
1Department of Chemistry, University of Toronto, 2Donnelly Centre for Cellular and Biomolecular Research, 3Institute for Biomaterials and Biomedical Engineering, University of Toronto
Digital Microfluidics is a technique characterized by the manipulation of discrete droplets (~nL - mL) on an array of electrodes by the application of electrical fields. It is well-suited for carrying out rapid, sequential, miniaturized automated biochemical assays. Here, we report a platform capable of automating several proteomic processing steps.
JoVE Bioengineering
Simple Microfluidic Devices for in vivo Imaging of C. elegans, Drosophila and Zebrafish
1Neurobiology, NCBS-TIFR, 2Department of Biological Sciences, TIFR
A simple microfluidic device has been developed to perform anesthetic free in vivo imaging of C. elegans, intact Drosophila larvae and zebrafish larvae. The device utilizes a deformable PDMS membrane to immobilize these model organisms in order to perform time lapse imaging of numerous processes such as heart beat, cell division and sub-cellular neuronal transport. We demonstrate the use of this device and show examples of different types of data collected from different model systems.
JoVE Bioengineering
A Microfluidic-based Hydrodynamic Trap for Single Particles
1Center for Biophysics and Computational Biology, University of Illinois at Urbana-Champaign, 2Department of Chemical and Biomolecular Engineering, University of Illinois at Urbana-Champaign
In this article, we present a microfluidic-based method for particle confinement based on hydrodynamic flow. We demonstrate stable particle trapping at a fluid stagnation point using a feedback control mechanism, thereby enabling confinement and micromanipulation of arbitrary particles in an integrated microdevice.
JoVE General
Fabrication and Operation of an Oxygen Insert for Adherent Cellular Cultures
Bioengineering, University of Illinois
Fabrication and validation of an add-on platform that offers enhanced control over the spatial and temporal oxygenation in a 6-well plate. The device is adaptable to a number of culture systems and can be used to investigate the effects of oxygen on wound healing.
JoVE General
Automated Microfluidic Blood Lysis Protocol for Enrichment of Circulating Nucleated Cells
1Department of Mechanical Engineering, University of Louisville, 2Department of Bioengineering, University of Louisville
An automated microfluidic device was developed for circulating nucleated cell enrichment from peripheral blood via erythrocyte lysis that ensures isolation of high quality sample without cell loss.
JoVE Bioengineering
Microfluidic Device for Recreating a Tumor Microenvironment in Vitro
Department of Chemical Engineering, University Of Massachusetts Amherst
We present the procedure for fabrication and operation of a microfluidic device that recreates heterogeneous tumor microenvironments in vitro. The variability in apoptosis within tumor tissue was quantified using fluorescent stains and the effective diffusion coefficient of the chemotherapeutic drug doxorubicin into tumor tissue was evaluated.
JoVE Bioengineering
High Throughput Single-cell and Multiple-cell Micro-encapsulation
Department of Mechanical Engineering, Vanderbilt University
Combining monodisperse drop generation with inertial ordering of cells and particles, we describe a method to encapsulate a desired number of cells or particles in a single drop at kHz rates. We demonstrate efficiencies twice exceeding those of unordered encapsulation for single- and double-particle drops.
JoVE Clinical and Translational Medicine
Evaluation of Cancer Stem Cell Migration Using Compartmentalizing Microfluidic Devices and Live Cell Imaging
1Department of Biomedical Engineering, University of Wisconsin-Madison, 2Materials Science Program, University of Wisconsin-Madison, 3Department of Neurological Surgery, University of Wisconsin-Madison, 4Carbone Comprehensive Cancer Center and Center for Stem Cell and Regenerative Medicine, University of Wisconsin-Madison
A compartmentalizing microfluidic device for investigating cancer stem cell migration is described. This novel platform creates a viable cellular microenvironment and enables microscopic visualization of live cell locomotion. Highly motile cancer cells are isolated to study molecular mechanisms of aggressive infiltration, potentially leading to more effective future therapies.
JoVE Applied Physics
Fabrication of Silica Ultra High Quality Factor Microresonators
1Department of Chemical Engineering and Materials Science, University of Southern California, 2Department of Electrical Engineering-Electrophysics, University of Southern California
We describe the use of a carbon dioxide laser reflow technique to fabricate silica resonant cavities, including free-standing microspheres and on-chip microtoroids. The reflow method removes surface imperfections, allowing long photon lifetimes within both devices. The resulting devices have ultra high quality factors, enabling applications ranging from telecommunications to biodetection.
JoVE Bioengineering
Solid-phase Submonomer Synthesis of Peptoid Polymers and their Self-Assembly into Highly-Ordered Nanosheets
Molecular Foundry, Lawrence Berkeley National Laboratory
A simple and general manual peptoid synthesis method involving basic equipment and commercially available reagents is outlined, enabling peptoids to be easily synthesized in most laboratories. The synthesis, purification and characterization of an amphiphilic peptoid 36mer is described, as well as its self-assembly into highly-ordered nanosheets.
JoVE General
PDMS Device Fabrication and Surface Modification
Havard Medical School, MGH - Massachusetts General Hospital
JoVE Neuroscience
Lateral Fluid Percussion: Model of Traumatic Brain Injury in Mice
1Department of Neuroscience and Cell Biology, University of Medicine and Dentistry of New Jersey-Robert Wood Johnson Medical School, 2Spinal Cord and Brain Injury Research Center, 3Department of Anatomy and Neurobiology, Department of Physical Medicine and Rehabilitation, University of Kentucky Chandler Medical Center
Lateral fluid percussion (LFP), an established model of traumatic brain injury in mice, is demonstrated. LFP fulfills three major criteria for animal models: validity, reliability and clinical relevance. The procedure, consisting of surgical craniotomy, fixation of hub followed by induction of injury, resulting in focal and diffuse injuries, is described.
JoVE Editorial
October 2012: This Month in JoVE
1Department of Ophthalmology, Massachusetts Eye and Ear, 2JoVE Content Production
Here are some highlights from the October 2012 Issue of Journal of Visualized Experiments (JoVE).
JoVE General
Brain Slice Stimulation Using a Microfluidic Network and Standard Perfusion Chamber
1Dept. of Bioengineering, University of Illinois, Chicago, 2Department of Anatomy and Cell Biology, University of Illinois, Chicago
We demonstrate fabrication of a simple microfluidic device that can be integrated with standard electrophysiology setups to expose microscale surfaces of a brain slice in a well controlled manner to different neurotransmitters.
JoVE General
Microfluidic Chips Controlled with Elastomeric Microvalve Arrays
Dept. of Bioengineering, University of Washington
We demonstrate protocols for manufacturing and automating elastomeric polydimethylsiloxane (PDMS)-based microvalve arrays that need no extra energy to close and feature photolithographically defined precise volumes. A parallel subnanoliter-volume mixer and an integrated microfluidic perfusion system are presented.
JoVE Editorial
JoVE 7th Issue
JoVE General
Micro-drive Array for Chronic in vivo Recording: Drive Fabrication
1Picower Institute for Learning and Memory, MIT - Massachusetts Institute of Technology, 2Department of Brain and Cognitive Science, MIT - Massachusetts Institute of Technology
In this protocol we demonstrate how to fabricate a micro-drive array for chronic electrophysiological recordings in rats.
JoVE General
Fabrication of the Thermoplastic Microfluidic Channels
Department of Biomedical Engineering, Boston University
Here we demonstrate how to fabricate thermoplastic microfluidic chips using hot embossing and heat sealing. Then we demonstrate how to use in situ light directed surface grafting and polymerization through the sealed chip to form the composite solid phase columns.
JoVE Applied Physics
Simulation, Fabrication and Characterization of THz Metamaterial Absorbers
School of Engineering, University of Glasgow
This protocol outlines the simulation, fabrication and characterization of THz metamaterial absorbers. Such absorbers, when coupled with an appropriate sensor, have applications in THz imaging and spectroscopy.
JoVE Chemistry
Origami Inspired Self-assembly of Patterned and Reconfigurable Particles
1Department of Chemical and Biomolecular Engineering, The Johns Hopkins University, 2Department of Chemistry, The Johns Hopkins University
We describe experimental details of the synthesis of patterned and reconfigurable particles from two dimensional (2D) precursors. This methodology can be used to create particles in a variety of shapes including polyhedra and grasping devices at length scales ranging from the micro to centimeter scale.
JoVE Bioengineering
Microfluidic Chip Fabrication and Method to Detect Influenza
1Department of Mechanical Engineering, Boston University, 2Department of Biomedical Engineering, Boston University
An integrated microfluidic thermoplastic chip has been developed for use as a molecular diagnostic. The chip performs nucleic acid extraction, reverse transcriptase, and PCR. Methods for fabricating and running the chip are described.
JoVE General
A Gradient-generating Microfluidic Device for Cell Biology
We describe a protocol for the microfabrication of the gradient-generating microfluidic device that can generate spatial and temporal gradients in well-defined microenvironment. In this approach, the gradient-generating microfluidic device can be used to study directed cell migration, embryogenesis, wound healing, and cancer metastasis.
JoVE Bioengineering
Separating Beads and Cells in Multi-channel Microfluidic Devices Using Dielectrophoresis and Laminar Flow
1Electrical and Computer Engineering, University of Illinois at Urbana-Champaign, 2Micro and Nanotechnology Lab, University of Illinois at Urbana-Champaign, 3Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, 4Bioengineering, University of Illinois at Urbana-Champaign
Dielectrophoresis (DEP) is an effective method to manipulate cells. Printed circuit boards (PCB) can provide inexpensive, reusable and effective electrodes for contact-free cell manipulation within microfluidic devices. By combining PDMS-based microfluidic channels with coverslips on PCBs, we demonstrate bead and cell manipulation and separation within multichannel microfluidic devices.
JoVE General
AC Electrokinetic Phenomena Generated by Microelectrode Structures
1Biomedical Engineering, Science and Health Systems, Drexel University, 2Mechanical Engineering and Mechanics, Drexel University
Manipulating fluids and suspended particles in the micro- and nano-scale is becoming more of a reality as enabling technologies, like AC electrokinetics, continue to develop. Here, we discuss the physics behind AC electrokinetics, how to fabricate these devices and how to interpret the experimental observations.
JoVE Applied Physics
Micropunching Lithography for Generating Micro- and Submicron-patterns on Polymer Substrates
Mechanical and Aerospace Engineering, University of Texas at Arlington
A micropunching lithography approach is developed to generate micro- and submicron-patterns on top, sidewall and bottom surfaces of polymer substrates. It overcomes the obstacles of patterning conducting polymers and generating sidewall patterns. This method allows rapid fabrication of multiple features and is free of aggressive chemistry.
JoVE General
BioMEMS: Forging New Collaborations Between Biologists and Engineers
Department of Biomedical Engineering, University of California, Irvine (UCI)
JoVE General
Microfluidic Co-culture of Epithelial Cells and Bacteria for Investigating Soluble Signal-mediated Interactions
1McFerrin Department of Chemical Engineering, Texas A&M University, 2Department of Biomedical Engineering, Texas A&M University
This protocol describes a microfluidic co-culture model for simultaneous and localized culture of epithelial cells and bacteria. This model can be used for investigating the role of different soluble molecular signals on pathogenesis as well as screen the effectiveness of putative probiotic bacterial strains.
JoVE Applied Physics
Ultrahigh Density Array of Vertically Aligned Small-molecular Organic Nanowires on Arbitrary Substrates
Electrical and Computer Engineering, University of Alberta
We report a simple method for fabricating an ultrahigh density array of vertically ordered small-molecular organic nanowires. This method allows for synthesis of complex heterostructured hybrid nanowire geometries, which can be inexpensively grown on arbitrary substrates. These structures have potential applications in organic electronics, optoelectronics, chemical sensing, photovoltaics and spintronics.
JoVE Editorial
JoVE 8th Issue
JoVE Bioengineering
Fabrication of Micro-tissues using Modules of Collagen Gel Containing Cells
1Institute of Biomaterials and Biomedical Engineering / Department of Chemical Engineering and Applied Chemistry, University of Toronto, 2Institute of Biomaterials and Biomedical Engineering, University of Toronto
Creation of micro-tissues using cylindrical collagen gels, called modules, that contain embedded cells and which surface is coated with endothelial cells.
JoVE Neuroscience
Design and Construction of a Cost Effective Headstage for Simultaneous Neural Stimulation and Recording in the Water Maze
Department of Neuroscience, Friedman Brain Institute, Mount Sinai School of Medicine
We present a low-cost method to design and construct a light headstage pre-amplifier system with simultaneous neural recording and stimulation capability. This device can be waterproofed for use in swimming animals.
JoVE Applied Physics
Synthesis and Operation of Fluorescent-core Microcavities for Refractometric Sensing
Department of Physics, University of Alberta
Fluorescent-core microcavity sensors employ a high-index quantum-dot coating in the channel of silica microcapillaries. Changes in the refractive index of fluids pumped into the capillary channel cause shifts in the microcavity fluorescence spectrum that can be used to analyze the channel medium.
JoVE General
A Multi-Parametric Islet Perifusion System within a Microfluidic Perifusion Device
1Department of Surgery, University of Illinois, Chicago, 2Department of Bioengineering, University of Illinois, Chicago
A microfluidic islet perifusion device was developed for the assessment of dynamic insulin secretion of multiple islets and simultaneous fluorescence imaging of calcium influx and mitochondrial potential changes.
JoVE Bioengineering
Fluorescence detection methods for microfluidic droplet platforms
1Department of Chemistry, Imperial College London, 2Department of Biochemistry, Protein Chip Research Center, Chungbuk National University, 3Department of Chemistry and Applied Biosciences, Institute for Chemical and Bioengineering, ETH Zurich
Droplet-based microfluidic platforms are promising candidates for high throughput experimentation since they are able to generate picoliter, self-compartmentalized vessels inexpensively at kHz rates. Through integration with fast, sensitive and high resolution fluorescence spectroscopic methods, the large amounts of information generated within these systems can be efficiently extracted, harnessed and utilized.
JoVE Bioengineering
Creating Adhesive and Soluble Gradients for Imaging Cell Migration with Fluorescence Microscopy
1Centre for Vascular Research and Australian Centre for Nanomedicine, The University of New South Wales, 2School of Chemistry and Australian Centre for Nanomedicine, The University of New South Wales
A method for the assembly of adhesive and soluble gradients in a microscopy chamber for live cell migration studies is described. The engineered environment combines antifouling surfaces and adhesive tracks with solution gradients and therefore allows one to determine the relative importance of guidance cues.
JoVE Applied Physics
Fabrication And Characterization Of Photonic Crystal Slow Light Waveguides And Cavities
School of Physics & Astronomy, University of St Andrews
Use of photonic crystal slow light waveguides and cavities has been widely adopted by the photonics community in many differing applications. Therefore fabrication and characterization of these devices are of great interest. This paper outlines our fabrication technique and two optical characterization methods, namely: interferometric (waveguides) and resonant scattering (cavities).
JoVE Bioengineering
Microfluidic-based Electrotaxis for On-demand Quantitative Analysis of Caenorhabditis elegans' Locomotion
1Department of Biology, McMaster University, 2Department of Mechanical Engineering, McMaster University
A semi-automated micro-electro-fluidic method to induce on-demand locomotion in Caenorhabditis elegans is described. This method is based on the neurophysiologic phenomenon of worms responding to mild electric fields (“electrotaxis”) inside microfluidic channels. Microfluidic electrotaxis serves as a rapid, sensitive, low-cost, and scalable technique to screen for factors affecting neuronal health.
JoVE Clinical and Translational Medicine
Method to Measure Tone of Axial and Proximal Muscle
1Department of Biomedical Engineering, Oregon Health and Science University, 2UCL Institute of Neurology, Queen Square, 3Department of Neurology, Oregon Health and Science University
We have developed a device (Twister) to study the regulation of tonic muscle activity during active postural maintenance. Twister measures torsional resistance and muscular responses in standing subjects during twisting of the body axis. The device can be flexibly configured to study various aspects of tonic control across the neck, trunk, and/or hips.
JoVE General
Micro-drive Array for Chronic in vivo Recording: Tetrode Assembly
1Department of Brain and Cognitive Science, MIT - Massachusetts Institute of Technology, 2Picower Institute for Learning and Memory, MIT - Massachusetts Institute of Technology
In this protocol we demonstrate how to fabricate and condition tetrodes for use with a micro-drive array, which was designed for chronic electrophysiological recordings in rats. In addition, we illustrate the final stages of micro-drive array construction, which includes installing ground wires and a protective cone.
JoVE Bioengineering
Fabrication of Micropatterned Hydrogels for Neural Culture Systems using Dynamic Mask Projection Photolithography
Biomedical Engineering, Tulane University
Simple techniques are described for the rapid production of microfabricated neural culture systems using a digital micromirror device for dynamic mask projection lithography on regular cell culture substrates. These culture systems may be more representative of natural biological architecture, and the techniques described could be adapted for numerous applications.
JoVE Bioengineering
Endothelialized Microfluidics for Studying Microvascular Interactions in Hematologic Diseases
1Department of Pediatrics, Emory University School of Medicine, 2Wallace H. Coulter Department of Biomedical Engineering, Georgia Institute of Technology and Emory University, 3Aflac Cancer Center and Blood Disorders Service of Children's Healthcare of Atlanta, 4Winship Cancer Institute of Emory University
A method to culture an endothelial cell monolayer throughout the entire inner 3D surface of a microfluidic device with microvascular-sized channels (<30 μm) is described. This in vitro microvasculature model enables the study of biophysical interactions between blood cells, endothelial cells, and soluble factors in hematologic diseases.
JoVE Bioengineering
High-throughput Synthesis of Carbohydrates and Functionalization of Polyanhydride Nanoparticles
1Department of Chemical and Biological Engineering, Iowa State University, 2Department of Chemistry, Iowa State University
In this article, a high throughput method is presented for the synthesis of oligosaccharides and their attachment to the surface of polyanhydride nanoparticles for further use in targeting specific receptors on antigen presenting cells.
JoVE Applied Physics
Harvesting Solar Energy by Means of Charge-Separating Nanocrystals and Their Solids
1Department of Physics, Bowling Green State University, 2The Center for Photochemical Sciences, Bowling Green State University, 3Department of Chemistry, Bowling Green State University
A general strategy for the development of charge-separating semiconductor nanocrystal composites deployable for solar energy production is presented. We show that assembly of donor-acceptor nanocrystal domains in a single nanoparticle geometry gives rise to a photocatalytic function, while bulk-heterojunctions of donor-acceptor nanocrystal films can be used for photovoltaic energy conversion.
JoVE General
Combining QD-FRET and Microfluidics to Monitor DNA Nanocomplex Self-Assembly in Real-Time
1Mechanical Engineering, Johns Hopkins University, 2Biomedical Engineering, Duke University, 3Biomedical Engineering, Johns Hopkins University
We present a novel and powerful integration of nanophotonics (QD-FRET) and microfluidics to investigate the formation of polyelectrolyte polyplexes, which is expected to provide better control and synthesis of uniform and customizable polyplexes for future nucleic acid-based therapeutics.
JoVE Bioengineering
Magnetically-Assisted Remote Controlled Microcatheter Tip Deflection under Magnetic Resonance Imaging
1Department of Radiology and Biomedical Imaging, University of California, San Francisco, 2School of Medicine, University of California, San Francisco, 3Department of Radiology and Biomedical Imaging, UCSF Medical Center, 4University of California, San Francisco, 5Hansen Medical, Mountain View, CA
Current applied to an endovascular microcatheter with microcoil tip made by laser lathe lithography can achieve controllable deflections under magnetic resonance (MR) guidance, which may improve speed and efficacy of navigation of vasculature during various endovascular procedures.
More Results...
