A Method for Ovarian Follicle Encapsulation and Culture in a Proteolytically Degradable 3 Dimensional System
1Institute for BioNanotechnology in Advanced Medicine, Northwestern University, 2Department of Obstetrics and Gynecology, Northwestern University, Feinberg School of Medicine, 3Center for Reproductive Research, Northwestern University, 4The Robert H. Lurie Comprehensive Cancer Center, Northwestern University, 5Department of Chemical and Biological Engineering, Northwestern University
A new method for ovarian follicle encapsulation in a 3D fibrin-alginate interpenetrating network is described. This system combines structural support with proteolytic degradation to support the development of immature follicles to produce mature oocytes. This method may be applied to culture cell aggregates to maintain cell-cell contacts without limiting expansion.
Culture of normal cells in their three-dimensional context represents an alternative method to study early events required for cellular transformation and tumorigenesis. This method is used to grow normal ovarian and oviductal cells to study early events in ovarian cancer formation.
1Department of Chemical and Biological Engineering, Illinois Institute of Technology, 2Department of Biomedical Engineering, Illinois Institute of Technology, 3Department of Biomedical Engineering, University of California at Irvine, 4Wake Forest Institute for Regenerative Medicine and Department of Biomedical Engineering, Wake Forest University Health Sciences, 5Research Service, Hines Veterans Administration Hospital
In the following sections, we outline procedures for the preparation of alginate microspheres for use in biomedical applications. We specifically illustrate a technique for creating multilayered alginate microspheres for the dual purpose of cell and protein encapsulation as a potential treatment for type 1 diabetes.
A 3D system of culturing human articular chondrocytes in high levels of synovial fluid is described. Synovial fluid reflects the most natural microenvironment for articular cartilage, and can be easily obtained and stored. This system thus can be used for studying cartilage regeneration and for screening therapeutics for treating arthritis.
1Fischell Department of Bioengineering, University of Maryland, 2Institute for Bioscience and Biotechnology Research, University of Maryland, 3Department of Materials Science and Engineering, University of Maryland
This article describes a biofabrication approach: deposition of stimuli-responsive polysaccharides in the presence of biased electrodes to create biocompatible films which can be functionalized with cells or proteins. We demonstrate a bench-top strategy for the generation of the films as well as their basic uses for creating interactive biofunctionalized surfaces for lab-on-a-chip applications.
Alginate Microcapsule as a 3D Platform for Propagation and Differentiation of Human Embryonic Stem Cells (hESC) to Different Lineages
1Stem Cell Lab, School of Psychiatry, Faculty of Medicine, The University of New South Wales, 2Siriraj Center of Excellence for Stem cell Research, Faculty of Medicine Siriraj Hospital, Mahidol University, 3Neuropsychiatric Institute, Prince of Wales Hospital
We have optimized a microencapsulation technique as an effective 3D platform for propagation and differentiation of embryonic stem cells to endoderm and dopaminergic (DA) neurons. It also provides an opportunity for immune-isolation of cells from the host during transplantation. This platform can be adapted for other cell types.
Reduction in Left Ventricular Wall Stress and Improvement in Function in Failing Hearts using Algisyl-LVR
This article describes procedures for implanting a novel hydrogel in failing hearts and quantifying its effect on left ventricular wall stress and function. These procedures have been successfully applied in dogs and humans.
This work details the preparation of 3D fibrin scaffolds for culturing and differentiating plutipotent stem cells. Such scaffolds can be used to screen the effects of various biological compounds on stem cell behavior as well as modified to contain drug delivery systems.
This protocol focuses on utilizing the inherent ability of stem cells to take cue from their surrounding extracellular matrix and be induced to differentiate into multiple phenotypes. This methods manuscript extends our description and characterization of a model utilizing a bilayered hydrogel, composed of PEG-fibrin and collagen, to simultaneously co-differentiate adipose-derived stem cells1.
We describe the isolation of neonatal cardiomyocytes and the preparation of the cells for encapsulation in fibrin hydrogel constructs for tissue engineering. We describe methods for analyzing the tissue engineered myocardium after the culture period including active force generated upon electrical stimulation and cell viability and immunohistological staining.
1Applied Bioscience Program, Faculty of Science, University of Ontario Institute of Technology, 2Nursing Program, Faculty of Health Sciences, University of Ontario Institute of Technology, 3Medical Laboratory Science Program, Faculty of Health Sciences, University of Ontario Institute of Technology
This study describes a novel microplate assay that measures FV coagulation activity during fibrin clot formation in human plasma which has not been reported previously. The method uses a kinetic microplate reader to continuously measure the change in absorbance at 405nm during fibrin clot formation in human plasma.
This video demonstrates the protocol of an in vitro angiogenesis assay that recapitulates several stages of angiogenesis. Time-lapse images of sprouting, lumen formation, branching and anastomosis - key features of angiogenesis - are shown.
Methods for preparing an injectable matrix gel from decellularized tissue and injecting it into rat myocardium in vivo are described.
A Chitosan Based, Laser Activated Thin Film Surgical Adhesive, 'SurgiLux': Preparation and Demonstration
The fabrication of a novel, flexible thin film surgical adhesive from FDA approved ingredients, chitosan and indocyanine green is described. Bonding of this adhesive to collagenous tissue through a simple activation process with a low-powered infra-red laser is demonstrated.
Bioluminescence Imaging for Assessment of Immune Responses Following Implantation of Engineered Heart Tissue (EHT)
1Transplant and Stem Cell Immunobiology Lab (TSI) and CVRC, University Hospital Hamburg, University Heart Center Hamburg, 2Department of Experimental and Clinical Pharmacology and Toxicology, University Heart Center Hamburg, 3CT Surgery, Stanford University School of Medicine
This video demonstrates the use of in vivo bioluminescence imaging to study immune responses after implantation of Engineered Heart Tissue (EHT) in rats.
1Institute for Molecular Cardiovascular Research, RWTH Aachen University, 2Institute for Textile Technology and Mechanical Engineering, RWTH Aachen University, 3Institute for Applied Medical Engineering, Helmholtz-Institute of RWTH Aachen University, 4Department of Experimental Molecular Imaging, RWTH Aachen University, 5Department of Oral and Maxillofacila Surgery, RWTH Aachen University
A model of stent implantation in mouse carotid artery is described. Compared to other similar methods, this procedure is very rapid, simple and accessible, offering the possibility to study in a convenient way the vascular wall reaction to different drug-eluting stents and the molecular mechanisms of restenosis.
1Department of Neurosurgery, Hospital Rudolfstiftung, 2Department of Neurosurgery, Kantonsspital Aarau, 3Cerebrovascular Research Group, Department of Biomedical Research, Medical University of Vienna, 4Cerebrovascular Research Group, Department of Intensive Care Medicine, University of Berne, 5Centre for Anatomy and Cell Biology, Department of Systematic Anatomy, Medical University of Vienna, 6Department of Neurology, Paracelsus University Salzburg
An optimized technique for the microsurgical creation of arterial bifurcation aneurysms mimicking bifurcation human cerebral aneurysms is described. A venous pouch is sutured into an artificially created true bifurcation of both common carotid arteries. Facilitated microsurgical techniques and aggressive postoperative anticoagulation and analgesia lead to minimized morbidity rates and high aneurysm patency rates.
1Department of Microbiology and Immunology, Tulane University Medical School, 2Physician/Scientist Program, Tulane University Medical School, 3Department of Molecular and Cellular Biology, Baylor College of Medicine
Traditional, two dimensional cell culture techniques often result in altered characteristics with respect to differentiation markers, cytokines and growth factors. Three-dimensional cell culture in the rotating cell culture system (RCCS) reestablishes expression of many of these factors as shown here with an extravillous trophoblast cell line.
This video presents a case of laparoscopic left liver sectoriectomy perfomed in a 53 year old man suffering from Caroli's disease limited to segment II and III of the liver.
PRP as a New Approach to Prevent Infection: Preparation and In vitro Antimicrobial Properties of PRP
1Department of Orthopaedics, School of Medicine, West Virginia University, 2Department of Orthopaedics, Stem Cell Research Center, University of Pittsburgh, 3WVNano Initiative, 4Mary Babb Randolph Cancer Center
Implant-associated infection is a significant clinical complication. This study describes an approach using platelet-rich plasma (PRP) to prevent implant-associated infections, presents the protocol for preparing PRP with constant platelet concentration, and reports the newly identified antimicrobial properties of PRP and related protocols for examining such antimicrobial properties in vitro.
A major hurdle in current stem cell therapies is determining the most effective method to deliver these cells to host tissues. Here, we describe a chitosan-based delivery method that is efficient and simple in approach, while allowing adipose-derived stem cells to maintain their multipotency.
1Bioelectronics and Neuroscience (BENS) research group, University of Western Sydney, NSW Australia, 2Australian School of Advanced Medicine, Macquarie University, NSW Australia, 3School of Medicine, University of Siena, Italy
Sutures are usually needed to repair tissue during surgical procedures. However, their application can be problematic as they are invasive and may damage tissue. The fabrication and application methods of a novel tissue adhesive are here reported. This adhesive film is laser-activated and does not require the use of sutures.
Engineering Skeletal Muscle Tissues from Murine Myoblast Progenitor Cells and Application of Electrical Stimulation
Engineered muscle tissue has great potential in regenerative medicine, as disease model and also as an alternative source for meat. Here we describe the engineering of a muscle construct, in this case from mouse myoblast progenitor cells, and the stimulation by electrical pulses.
Here, we describe a methodology to deliver human cord blood-derived endothelial colony-forming cells (ECFCs) and bone marrow-derived mesenchymal stem cells (MSCs), embedded in a collagen/fibronectin gel, subcutaneously into immunodeficient mice. This cell/gel combination generates a human vascular network that connects with the mouse vasculature.
Directed Cellular Self-Assembly to Fabricate Cell-Derived Tissue Rings for Biomechanical Analysis and Tissue Engineering
This article outlines a versatile method to create cell-derived tissue rings by cellular self-assembly. Smooth muscle cells seeded into ring-shaped agarose wells aggregate and contract to form robust three-dimensional (3D) tissues within 7 days. Millimeter-scale tissue rings are conducive to mechanical testing and serve as building blocks for tissue assembly.
This protocol describes an activity-based assay for detecting matrix metalloproteinases in culture supernatants or body fluids.
Christopher C.W. Hughes describes the utility of his culture system for studying angiogenesis in vitro. He explains the importance of fibroblasts that secrete a critical, yet unidentified, soluble factor that allow endothelial cells to form vessels in culture that branch, form proper lumens, and undergo anastamosis.
Protocols for utilizing open system flow biofilms with drip flow reactors and rotating disk reactors are presented in detail.
A method for photo-encapsulation of cells in a crosslinked PEG hydrogel is described. Hypoxic signaling within encapsulated murine insulinoma (MIN6) aggregates is tracked using a fluorescent marker system. This system allows serial examination of cells within a hydrogel scaffold and correlation of hypoxic signaling with changes in cell phenotype.
Density Gradient Multilayered Polymerization (DGMP): A Novel Technique for Creating Multi-compartment, Customizable Scaffolds for Tissue Engineering
1Skaggs School of Pharmacy and Pharmaceutical Sciences, University of California, San Diego, 2Biomedical Sciences Program, University of California, San Diego, 3Department of Bioengineering, University of California, San Diego
Here we describe a unique strategy for creating biocompatible, layered matrices with continuous interfaces between distinct layers for tissue engineering. Such a scaffold could provide an ideal customizable environment to modulate cell behavior by various biological, chemical or mechanical cues
1Department of poverty related diseases, Barcelona Centre for International Health Research, 2Confocal Microscopy Unit, University of Barcelona- Scientific and Technological Centers, 3Institució Catalana de Recerca i Estudis Avançats (ICREA)
We show the method for performing intravital microscopy of the spleen using GFP transgenic malaria parasites and the quantification of parasite mobility and blood flow within this organ.
The biosynthesis of cartilaginous extracellular matrix by chondrocytes can be affected by application of mechanical stimuli. This method describes the technique of applying dynamic compressive strains to chondrocytes encapsulated in 3D constructs and the evaluation of induced changes in chondrocyte metabolism.
Zebrafish represents a valuable model to study the mechanisms of heart regeneration in vertebrates. Here, we present a protocol for induction of a heart infarct in adult zebrafish using cryoinjury. This method results in massive cell death within 20% of the ventricular wall, similar to that observed in mammalian infarcts.
Real-time Imaging of Heterotypic Platelet-neutrophil Interactions on the Activated Endothelium During Vascular Inflammation and Thrombus Formation in Live Mice
Here we report an experimental technique of fluorescence intravital microscopy to visualize heterotypic platelet-neutrophil interactions on the activated endothelium during vascular inflammation and thrombus formation in live mice. This microscopic technology will be valuable to study the molecular mechanism of vascular disease and to test pharmacologic agents under pathophysiological conditions.
1Department of Physics, Clemson University, 2Department of Pharmacology and Toxicology, East Carolina University, 3Department of Bioengineering, Clemson University, 4Center for Optical Materials Science and Engineering Technologies, Clemson University
Graphene offers potential as a coating material for biomedical implants. In this study we demonstrate a method for coating nitinol alloys with nanometer thick layers of graphene and determine how graphene may influence implant response.
A rotating cell culture system that allows epithelial cells to grow under physiological conditions resulting in 3-D cellular aggregate formation is described. The aggregates generated display in vivo-like characteristics not observed in conventional culture models and serve as a more accurate organotypic model system for a multitude of scientific investigations.
1Department of Ophthalmology, Massachusetts Eye and Ear, 2JoVE Content Production
Here are some highlights from the March 2013 issue of Journal of Visualized Experiments (JoVE).
The generation of aligned myocardial tissue is a key requirement for adapting the recent advances in stem cell biology to clinically useful purposes. Herein we describe a microcontact printing approach for the precise control of cell shape and function. Using highly purified populations of embryonic stem cell derived cardiac progenitors, we then generate anisotropic functional myocardial tissue.
In this article we describe the use of magnetic tweezers to study the effect of force on enzymatic proteolysis at the single molecule level in a highly parallelizable manner.
Preparation of Pooled Human Platelet Lysate (pHPL) as an Efficient Supplement for Animal Serum-Free Human Stem Cell Cultures
Human platelet lysate is a rich source of growth factors and a potent supplement in cell culture. This protocol presents the process of preparing a large pool of human platelet lysate by starting from platelet rich plasma, performing several freeze-thaw cycles and depleting the platelet fragments.
This video protocol illustrates the isolation and culture of human umbilical vein endothelial cells (HUVEC) from human umbilical cord. Once isolated these cells can be used for in vitro angiogenesis assays like the Optimized Fibrin Gel Bead Assay also demonstrated by the Hughes lab.
Microbial biofilms are generally constituted by distinct subpopulations of specialized cells. Single-cell analysis of these subpopulations requires the use of fluorescent reporters. Here we describe a protocol to visualize and monitor several subpopulationswithin B. subtilis biofilms using fluorescence microscopy and flow cytometry.