JoVE Immunology and Infection
Generation of Multivirus-specific T Cells to Prevent/treat Viral Infections after Allogeneic Hematopoietic Stem Cell Transplant
Center for Cell and Gene Therapy, Baylor College of Medicine
A rapid, simple and cost-effective protocol for the generation of donor-derived multivirus-specific CTLs (rCTL) for infusion to allogeneic hematopoietic stem cell transplant (HSCT) recipients at risk of developing CMV, Adv or EBV infections. This manufacturing process is GMP-compliant and should ensure the broader implementation of T-cell immunotherapy beyond specialized centers.
JoVE General
Generation of Stable Human Cell Lines with Tetracycline-inducible (Tet-on) shRNA or cDNA Expression
1UCL Cancer Institute, 2Friedrich Miescher Institute for Biomedical Research
A rapid and simple way to generate human cell lines with inducible and reversible cDNA overexpression or shRNA-mediated knock-down of the gene of interest. This method enables researchers to reliably and highly reproducibly manipulate cell lines that are difficult to alter by transient transfection methods or conventional knockdown/knockout strategies.
JoVE General
Design and Use of Multiplexed Chemostat Arrays
Department of Genome Sciences, University of Washington
We developed and validated a small-footprint array of miniature chemostats built from readily available parts for low cost. Physiological and experimental evolution results were similar to larger volume chemostats. The ministat array provides a compact, inexpensive, and accessible platform for traditional chemostat experiments, functional genomics, and chemical screening applications.
JoVE General
Preparation of Cell-lines for Conditional Knockdown of Gene Expression and Measurement of the Knockdown Effects on E4orf4-Induced Cell Death
Department of Molecular Microbiology, Faculty of Medicine, Technion - Israel Institute of Technology
Contribution of the ACF chromatin remodeling factor to E4orf4-induced cell death was measured. The protocol includes selection of cell clones in which doxycycline treatment induces conditional knockdown of the ACF subunits Acf1 and SNF2h, and use of the DAPI assay to measure E4orf4-induced cell death in the inducible cell lines.
JoVE Neuroscience
Intact Histological Characterization of Brain-implanted Microdevices and Surrounding Tissue
1Weldon School of Biomedical Engineering, Purdue University, 2Department of Biological Sciences, Purdue University
Here we present a histological method for capturing, labeling, optically clearing, and imaging the intact brain tissue interface around chronically implanted microdevices in rodent brain tissue. Results from the techniques comprising this method are useful for understanding the impact of various penetrating brain-implants on their surrounding tissue.
JoVE Bioengineering
A Microfluidic Device for Studying Multiple Distinct Strains
We present a simple method to produce microfluidic devices capable of applying similar dynamic conditions to multiple distinct strains, without the need for a clean room or soft lithography.
JoVE Bioengineering
Design of a Biaxial Mechanical Loading Bioreactor for Tissue Engineering
1Department of Orthopaedics, The Warren Alpert Brown Medical School of Brown University and the Rhode Island Hospital, 2Center for Restorative and Regenerative Medicine, VA Medical Center, Providence, RI, 3University of Texas Southwestern Medical Center
We designed a novel mechanical loading bioreactor that can apply uniaxial or biaxial mechanical strain to a cartilage biocomposite prior to transplantation into an articular cartilage defect.
JoVE General
High-throughput Screening for Small-molecule Modulators of Inward Rectifier Potassium Channels
1Department of Pharmacology, Vanderbilt University School of Medicine, 2Department of Anesthesiology, Vanderbilt University School of Medicine, 3Vanderbilt Institute of Chemical Biology, Vanderbilt University School of Medicine
Methods for developing and validating a quantitative fluorescence assay for measuring the activity of inward rectifier potassium (Kir) channels for high-throughput compound screening is presented.
JoVE Bioengineering
Microfluidic Chip Fabrication and Method to Detect Influenza
1Department of Mechanical Engineering, Boston University, 2Department of Biomedical Engineering, Boston University
An integrated microfluidic thermoplastic chip has been developed for use as a molecular diagnostic. The chip performs nucleic acid extraction, reverse transcriptase, and PCR. Methods for fabricating and running the chip are described.
JoVE Bioengineering
Impulsive Pressurization of Neuronal Cells for Traumatic Brain Injury Study
Department of Engineering Mechanics, University of Nebraska-Lincoln
A novel impulsive cell pressurization experiment has been developed using a Kolsky bar device to investigate the molecular/cellular mechanisms of blast-induced traumatic brain injury.
JoVE Clinical and Translational Medicine
Evaluation of Cancer Stem Cell Migration Using Compartmentalizing Microfluidic Devices and Live Cell Imaging
1Department of Biomedical Engineering, University of Wisconsin-Madison, 2Materials Science Program, University of Wisconsin-Madison, 3Department of Neurological Surgery, University of Wisconsin-Madison, 4Carbone Comprehensive Cancer Center and Center for Stem Cell and Regenerative Medicine, University of Wisconsin-Madison
A compartmentalizing microfluidic device for investigating cancer stem cell migration is described. This novel platform creates a viable cellular microenvironment and enables microscopic visualization of live cell locomotion. Highly motile cancer cells are isolated to study molecular mechanisms of aggressive infiltration, potentially leading to more effective future therapies.
JoVE General
A Gradient-generating Microfluidic Device for Cell Biology
We describe a protocol for the microfabrication of the gradient-generating microfluidic device that can generate spatial and temporal gradients in well-defined microenvironment. In this approach, the gradient-generating microfluidic device can be used to study directed cell migration, embryogenesis, wound healing, and cancer metastasis.
JoVE Bioengineering
Fabrication of Micropatterned Hydrogels for Neural Culture Systems using Dynamic Mask Projection Photolithography
Biomedical Engineering, Tulane University
Simple techniques are described for the rapid production of microfabricated neural culture systems using a digital micromirror device for dynamic mask projection lithography on regular cell culture substrates. These culture systems may be more representative of natural biological architecture, and the techniques described could be adapted for numerous applications.
JoVE Clinical and Translational Medicine
Catheter Ablation in Combination With Left Atrial Appendage Closure for Atrial Fibrillation
Department of Cardiology, St. Antonius Hospital, The Netherlands
Catheter ablation is combined with placement of the WATCHMAN Left Atrial Appendage Closure Device to prevent ischemic stroke in a patient with non-valvular atrial fibrillation.
JoVE General
A Microfluidic Device with Groove Patterns for Studying Cellular Behavior
We describe a protocol for the fabrication of microfluidic devices that can enable cell capture and culture. In this approach patterned microstructures such as grooves within microfluidic channels are used to create low shear stress regions within which cell can dock.
JoVE Bioengineering
Simple Microfluidic Devices for in vivo Imaging of C. elegans, Drosophila and Zebrafish
1Neurobiology, NCBS-TIFR, 2Department of Biological Sciences, TIFR
A simple microfluidic device has been developed to perform anesthetic free in vivo imaging of C. elegans, intact Drosophila larvae and zebrafish larvae. The device utilizes a deformable PDMS membrane to immobilize these model organisms in order to perform time lapse imaging of numerous processes such as heart beat, cell division and sub-cellular neuronal transport. We demonstrate the use of this device and show examples of different types of data collected from different model systems.
JoVE General
In vivo Imaging of Intact Drosophila Larvae at Sub-cellular Resolution
1Junior Research Group Synaptic Plasticity, Hertie Institute for Clinical Brain Research, University of Tübingen, 2Graduate School of Cellular and Molecular Neuroscience, University of Tübingen
This protocol describes a reliable method for anesthetization and imaging of intact Drosophila melanogaster larvae. We have utilized the volatile anesthetic desflurane to allow for repetitive imaging at sub-cellular resolution and re-identification of structures for up to a few days1.
JoVE Bioengineering
Creating Adhesive and Soluble Gradients for Imaging Cell Migration with Fluorescence Microscopy
1Centre for Vascular Research and Australian Centre for Nanomedicine, The University of New South Wales, 2School of Chemistry and Australian Centre for Nanomedicine, The University of New South Wales
A method for the assembly of adhesive and soluble gradients in a microscopy chamber for live cell migration studies is described. The engineered environment combines antifouling surfaces and adhesive tracks with solution gradients and therefore allows one to determine the relative importance of guidance cues.
JoVE Bioengineering
Biosensor for Detection of Antibiotic Resistant Staphylococcus Bacteria
1Department of Anatomy, Physiology and Pharmacology, College of Veterinary Medicine, Auburn University, 2Clinical Research Laboratory, 81st Medical Group, Keesler Air Force Base
Lytic phage biosensors and antibody beads are able to discriminate between methicillin resistant (MRSA) and sensitive staphylococcus bacteria. The phages were immobilized by a Langmuir-Blodgett method onto a surface of a quartz crystal microbalance sensor and worked as broad range staphylococcus probes. Antibody beads recognize MRSA.
JoVE General
Non-plasma Bonding of PDMS for Inexpensive Fabrication of Microfluidic Devices
1Department of Biomedical Engineering, University of California, Irvine (UCI), 2Stem Cell Research Center, University of California, Irvine (UCI), 3Institute for Brain Aging and Dementia, University of California, Irvine (UCI)
In this video we demonstrate how to use the neuron microfluidic device without plasma bonding.
JoVE General
Microfluidic Applications for Disposable Diagnostics
Department of Biomedical Engineering, Boston University
In this interview, Dr. Klapperich discusses the fabrication of thermoplastic microfluidic devices and their application for development of new diagnostics.
JoVE General
A Microfluidic Device for Quantifying Bacterial Chemotaxis in Stable Concentration Gradients
1McFerrin Department of Chemical Engineering, Texas A&M University, 2Department of Biology, Texas A&M University, 3Department of Biomedical Engineering, Texas A&M University
This protocol describes the development of a microfluidic device for investigating bacterial chemotaxis in stable concentration gradients of chemoeffectors.
JoVE Neuroscience
The NeuroStar TMS Device: Conducting the FDA Approved Protocol for Treatment of Depression
1Berenson-Allen Center for Noninvasive Brain Stimulation, Beth Israel Deaconess Medical Center, 2Neuronetics, Inc.
In this article, we examine the methodology and considerations relevant to the FDA approved depression treatment protocol using the Neuronetics NeuroStar TMS device.
JoVE General
Fabrication of a Microfluidic Device for the Compartmentalization of Neuron Soma and Axons
1Department of Biomedical Engineering, University of California, Irvine (UCI), 2Stem Cell Research Center, University of California, Irvine (UCI), 3Institute for Brain Aging and Dementia, University of California, Irvine (UCI)
In this video we demonstrate the technique of soft lithography with polydimethyl siloxane (PDMS) which we use to farbricate a microfluidic device for culturing neurons.
JoVE General
Microfluidic Co-culture of Epithelial Cells and Bacteria for Investigating Soluble Signal-mediated Interactions
1McFerrin Department of Chemical Engineering, Texas A&M University, 2Department of Biomedical Engineering, Texas A&M University
This protocol describes a microfluidic co-culture model for simultaneous and localized culture of epithelial cells and bacteria. This model can be used for investigating the role of different soluble molecular signals on pathogenesis as well as screen the effectiveness of putative probiotic bacterial strains.
JoVE General
BioMEMS: Forging New Collaborations Between Biologists and Engineers
Department of Biomedical Engineering, University of California, Irvine (UCI)
JoVE General
Identifying Targets of Human microRNAs with the LightSwitch Luciferase Assay System using 3'UTR-reporter Constructs and a microRNA Mimic in Adherent Cells
MicroRNAs (miRNAs) are important regulators of gene expression and have been shown to play a role in numerous biological processes. To better understand miRNA-UTR interactions, we have created a genome-wide collection of 3 UTR luciferase reporters paired with a novel luciferase gene and assay reagent, the LightSwitch system.
JoVE General
Fabrication and Operation of an Oxygen Insert for Adherent Cellular Cultures
Bioengineering, University of Illinois
Fabrication and validation of an add-on platform that offers enhanced control over the spatial and temporal oxygenation in a 6-well plate. The device is adaptable to a number of culture systems and can be used to investigate the effects of oxygen on wound healing.
JoVE General
Optical Scatter Microscopy Based on Two-Dimensional Gabor Filters
Department of Biomedical Engineering, Rutgers University
We demonstrate a dark-field microscopy method based on Gabor-like filtering to measure subcellular dynamics within single living cells. The technique is sensitive to alterations in the structure of organelles, such as mitochondrial fragmentation.
JoVE Clinical and Translational Medicine
Non-invasive Optical Measurement of Cerebral Metabolism and Hemodynamics in Infants
1Athinoula A. Martinos Center for Biomedical Imaging, Massachusetts General Hospital, Harvard Medical School, 2Lab. PALM, Université de Caen Basse-Normandie, 3Fetal-Neonatal Neuroimaging and Developmental Science Center, Boston Children's Hospital, Harvard Medical School, 4ISS, INC.
We combined frequency-domain near-infrared spectroscopy measures of cerebral hemoglobin oxygenation with diffuse correlation spectroscopy measures of cerebral blood flow index to estimate an index of oxygen metabolism. We tested the utility of this measure as a bedside screening tool to evaluate the health and development of the newborn brain.
JoVE Bioengineering
Graphene Coatings for Biomedical Implants
1Department of Physics, Clemson University, 2Department of Pharmacology and Toxicology, East Carolina University, 3Department of Bioengineering, Clemson University, 4Center for Optical Materials Science and Engineering Technologies, Clemson University
Graphene offers potential as a coating material for biomedical implants. In this study we demonstrate a method for coating nitinol alloys with nanometer thick layers of graphene and determine how graphene may influence implant response.
JoVE Bioengineering
Wide-field Fluorescent Microscopy and Fluorescent Imaging Flow Cytometry on a Cell-phone
1Electrical Engineering Department, University of California, Los Angeles, 2Bioengineering Department, University of California, Los Angeles, 3California NanoSystems Institute (CNSI), University of California, Los Angeles
We review our recent results on the integration of fluorescent microscopy and imaging flow cytometry tools on a cell-phone using compact and cost-effective opto-fluidic attachments. These cell-phone based micro-analysis devices might be useful for cytometric analysis, such as performing various cell counting tasks as well as for high-throughput screening of e.g., water samples in resource limited settings.
JoVE Immunology and Infection
Expanding Cytotoxic T Lymphocytes from Umbilical Cord Blood that Target Cytomegalovirus, Epstein-Barr Virus, and Adenovirus
1Center for Cell and Gene Therapy, Baylor College of Medicine, 2Pathology and Immunology, Baylor College of Medicine, 3Department of Stem Cell Transplantation and Cellular Therapy, University of Texas M.D. Anderson Cancer Center, 4Medicine, Baylor College of Medicine, 5Department of Pediatrics, Baylor College of Medicine
Here we describe the first good manufacturing practice (GMP)-compliant method of producing virus-specific cytotoxic T lymphocytes (CTL) from umbilical cord blood, a source of predominantly naîve T cells.
JoVE Immunology and Infection
piggyBac Transposon System Modification of Primary Human T Cells
1Program in Translational Biology and Molecular Medicine, Baylor College of Medicine, 2Department of Medicine, Division of Nephrology, Baylor College of Medicine, 3Department of Immunology and Pathology, Shinshu University School of Medicine, 4Center for Cell and Gene Therapy, Baylor College of Medicine, 5Department of Pediatrics, Baylor College of Medicine, 6Program in Cell and Molecular Biology, Baylor College of Medicine, 7Department of Molecular Virology and Microbiology, Baylor College of Medicine, 8Michael E. DeBakey VA Medical Center
We describe a method to genetically modify primary human T cells with a transgene using the non-viral piggyBac transposon system. T cells modified to using the piggyBac transposon system exhibit stable transgene expression.
JoVE Neuroscience
Laser Capture Microdissection of Drosophila Peripheral Neurons
1Department of Molecular and Microbiology, George Mason University, 2Krasnow Institute for Advanced Study, George Mason University
In this video-article we present a method for isolating single or multiple Drosophila da neurons from third instar larvae using the infrared capture (IR) class of Laser Capture Microdissection (LCM). RNA obtained from the isolated neurons can be readily used for downstream applications including qRT-PCR or microarray analyses.
JoVE Applied Physics
Simulation, Fabrication and Characterization of THz Metamaterial Absorbers
School of Engineering, University of Glasgow
This protocol outlines the simulation, fabrication and characterization of THz metamaterial absorbers. Such absorbers, when coupled with an appropriate sensor, have applications in THz imaging and spectroscopy.
JoVE General
Recapitulation of an Ion Channel IV Curve Using Frequency Components
Bioengineering, University of Utah
There are technical obstacles to measuring current flux through multiple ion channels simultaneously, and later discerning what portion of the transmembrane current is due to each channel type. To address this need, this method presents a way to generate the IV curve of individual channel types using specific frequency components.
JoVE General
Preparation of Aplysia Sensory-motor Neuronal Cell Cultures
1Dept. of Psychiatry and Biobehavioral Sciences, University of California, Los Angeles, 2Dept. of Biological Chemistry, University of California, Los Angeles, 3Semel Institute for Neuroscience and Human Behavior, University of California, Los Angeles
Primary cultures of Aplysia sensory-motor neurons provide a model preparation for studying synapse formation and synaptic plasticity in vitro. This video demonstrates the identification and microdissection of sensory and motor neurons from Aplysia ganglia as well as the methods for establishing and maintaining sensory-motor neurons in culture.
JoVE General
Cryopreservation of Mouse Embryos by Ethylene Glycol-Based Vitrification
An ethylene glycol-based vitrification method for mouse embryos is described. It is advantageous to other methods in its simplicity and low embryonic toxicity, and therefore can be broadly applicable to many strains of mice, including inbred and gene-modified mice.
JoVE Bioengineering
Endothelialized Microfluidics for Studying Microvascular Interactions in Hematologic Diseases
1Department of Pediatrics, Emory University School of Medicine, 2Wallace H. Coulter Department of Biomedical Engineering, Georgia Institute of Technology and Emory University, 3Aflac Cancer Center and Blood Disorders Service of Children's Healthcare of Atlanta, 4Winship Cancer Institute of Emory University
A method to culture an endothelial cell monolayer throughout the entire inner 3D surface of a microfluidic device with microvascular-sized channels (<30 μm) is described. This in vitro microvasculature model enables the study of biophysical interactions between blood cells, endothelial cells, and soluble factors in hematologic diseases.
JoVE Bioengineering
Autologous Endothelial Progenitor Cell-Seeding Technology and Biocompatibility Testing For Cardiovascular Devices in Large Animal Model
1Department of Biomedical Engineering, Duke University, 2School of Medicine, Duke University, 3Department of Surgery, Duke University Medical Center, 4School of Medicine, University of Pennsylvania
A method for seeding titanium blood-contacting biomaterials with autologous cells and testing biocompatibility is described. This method uses endothelial progenitor cells and titanium tubes, seeded within minutes of surgical implantation into porcine venae cavae. This technique is adaptable to many other implantable biomedical devices.
JoVE General
High Speed Droplet-based Delivery System for Passive Pumping in Microfluidic Devices
1Materials Science Program, University of Wisconsin-Madison, 2Department of Biomedical Engineering, University of Wisconsin-Madison
A novel microfluidic system has been developed using the phenomenon of passive pumping and a user controlled fluid delivery system. This microfluidic system has the potential to be used in a wide variety of biological applications given its low cost, ease of use, volumetric precision, high speed, repeatability and automation.
JoVE Bioengineering
Rapid Isolation of Viable Circulating Tumor Cells from Patient Blood Samples
1Department of Biomedical Engineering, Cornell University, 2BioCytics, Inc., 3Carolina BioOncology Institute, PLLC
Circulating tumor cells are isolated from the blood of cancer patients without inflicting cellular damage. Isolation of tumor cells is accomplished using a bimolecular surface of E-selectin in addition to antibodies against epithelial markers. A nanotube coating specifically promotes cancer cell adhesion resulting in high capture purities.
JoVE Clinical and Translational Medicine
Live Imaging of Drug Responses in the Tumor Microenvironment in Mouse Models of Breast Cancer
1Watson School of Biological Sciences, 2Cold Spring Harbor Laboratory, 3Departments of Medical Genetics, University of Oslo and Oslo University Hospital
We describe a method for imaging response to anti-cancer treatment in vivo and at single cell resolution.
JoVE General
Silicon Microchips for Manipulating Cell-cell Interaction
Laboratory for Multiscale Regenerative Technologies, MIT - Massachusetts Institute of Technology
This article describes an experimental approach for dynamic regulation of cell-cell interactions between adherent cells on a micrometer scale. Manipulation of intercellular communication between hepatocytes and stromal cell is demonstrated. The developed platform enables investigation of cell-cell interactions in a variety of biological processes, including development and pathogenesis.
JoVE Bioengineering
Microfabricated Platforms for Mechanically Dynamic Cell Culture
1Department of Mechanical and Industrial Engineering, University of Toronto, 2Institute of Biomaterials and Biomedical Engineering, University of Toronto, 3Faculty of Dentistry, University of Toronto
In this protocol, we demonstrate the fabrication of a microactuator array of vertically displaced posts on which the technology is based, and how this base technology can be modified to conduct high-throughput mechanically dynamic cell culture in both two-dimensional and three-dimensional culture paradigms.
JoVE General
A Multi-compartment CNS Neuron-glia Co-culture Microfluidic Platform
1Department of Electrical and Computer Engineering, Texas A&M University (TAMU), 2Department of Veterinary Integrative Biosciences, Texas A&M University (TAMU)
We developed a novel multi-compartment neuron co-culture microsystem platform for in vitro CNS axon-glia interaction research. The platform is capable of conducting up to six independent experiments in parallel and was fabricated using a newly developed macro/micro hybrid fabrication method.
JoVE Neuroscience
Investigations on Alterations of Hippocampal Circuit Function Following Mild Traumatic Brain Injury
1Division of Neurology, Children's Hospital of Philadelphia, 2Neuroscience Graduate Group, Perelman School of Medicine at the University of Pennsylvania, 3Department of Pediatrics, Perelman School of Medicine at the University of Pennsylvania
A multi-faceted approach to investigating functional changes to hippocampal circuitry is explained. Electrophysiological techniques are described along with the injury protocol, behavioral testing and regional dissection method. The combination of these techniques can be applied in similar fashion for other brain regions and scientific questions.
JoVE General
Window on a Microworld: Simple Microfluidic Systems for Studying Microbial Transport in Porous Media
1Vanderbilt Institute for Integrative Biosystems Research and Education, Vanderbilt University, 2Department of Biomedical Engineering, Vanderbilt University, 3Department of Molecular Physiology and Biophysics, Vanderbilt University, 4Department of Physics and Astronomy, Vanderbilt University, 5Department of Chemical, Materials and Biomolecular Engineering, University of Connecticut, 6Center for Environmental Sciences and Engineering, University of Connecticut
Microfluidic devices can be used to visualize complex natural processes in real time and at the appropriate physical scales. We have developed a simple microfluidic device that mimics key features of natural porous media for studying growth and transport of bacteria in the subsurface.
JoVE Bioengineering
Separating Beads and Cells in Multi-channel Microfluidic Devices Using Dielectrophoresis and Laminar Flow
1Electrical and Computer Engineering, University of Illinois at Urbana-Champaign, 2Micro and Nanotechnology Lab, University of Illinois at Urbana-Champaign, 3Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, 4Bioengineering, University of Illinois at Urbana-Champaign
Dielectrophoresis (DEP) is an effective method to manipulate cells. Printed circuit boards (PCB) can provide inexpensive, reusable and effective electrodes for contact-free cell manipulation within microfluidic devices. By combining PDMS-based microfluidic channels with coverslips on PCBs, we demonstrate bead and cell manipulation and separation within multichannel microfluidic devices.
More Results...
