Name: Quantitative Optical Microscopy: Measurement of Cellular Biophysical Features with a Standard Optical Microscope (Video) | JoVE Journal
Uploaded: 2014-04-07T14:45:00.000+00:00
Duration: 14 min 9 s
Description: Learn to quantify cellular mass, volume, and density using a standard optical microscope with bright field and differential interference contrast imaging. This non-invasive method enables live cell analysis without fixation or staining.

ai_agent_IP

ai_agent

maintenance

instantTrialDurationMinutes

isBiopharma

enableNewMyJoveSectionDesign

educationFeatures

seoMetaApi

ai_copilot_institution_blacklist

ai_chat_institution_blacklist

freeAccessWindow

ssoRoleCapture

scheduledMaintenanceBanner

joveLabsFeatures

disable_autoplay_for_bots

extended_trial_duration

5 minutes

This work was supported by grants from the National Institutes of Health (U54CA143906 to K.G.P., O.J.T.M and R01HL101972 to O.J.T.M.) and an Oregon Medical Research Foundation Early Clinical Investigator Award (K.G.P.). O.J.T.M. is an American Heart Association Established Investigator (13EIA12630000). We thank Dr. Eric Anderson of the Knight Cancer Institute for preparing cell samples used in this work.

1. Microscope Specifications
To carry out imaging in the correct fashion the microscope should have the following specifications:
<ol>
	<li>Possess both differential interference contrast (DIC) and brightfield (BF) contrast.</li>
	<li>Have computer-controlled z-axis movement.</li>
	<li>Have an adjustable aperture stop to vary the condenser lens numerical aperture. An aperture with a graded rule or electronic readout is required to know the value of the numerical aperture. The numerical aperture should range from 0.1 for NIQPM up to 0.9 (or higher) for HTDIC.</li>
	<li>The microscope should have a narrow band color filter to be utilized for bright field imaging. This filter is required to fix the refractive increment, a wavelength-dependent facture used to convert phase to mass density for NIQP.</li>
</ol>
2. Differential Interference Contrast (DIC) Z-stack Acquisition
<ol>
	<li>Open the SlideBook software and create a new slide for image collection.</li>
	<li>Next, open the Focus Window. Under the Filter Set section, select DIC. On the Scope tab, under the Condenser section, adjust the Aperture slide bar to the furthest right position (open all the way). This provides high numerical aperture illumination and enhances optical sectioning of the specimen.</li>
	<li>Focus on the sample using a DIC objective. Adjust the halogen lamp intensity until the sample is easily visible. To ensure the camera is not being saturated, select the Camera tab in the Focus Window and check that the histogram of pixel intensities is within the dynamic range of the camera.</li>
	<li>Open the Image Capture window. In the Capture Type section, check the 3D box. In the 3D Capture section, select the Range around center and Return to current location boxes and specify the Z-direction range, number of planes, and step size. The Z-direction range should incorporate the entire sample.</li>
	<li>In the Filter Set section of the Image Capture window, check the DIC box and specify exposure time. In the Image Information section, name the image (optional), and select Start to initiate the imaging.</li>
</ol>
3. Bright Field (BF) Z-stack Acquisition
<ol>
	<li>Once the microscope has finished collecting the DIC Z-stack of the sample, open the Focus Window and select Open under the Filter Set section. Adjust the Aperture slide bar to the furthest left position (closed all the way) to provide low NA illumination.</li>
	<li>Change the microscope light-path filter to green. Adjust the halogen lamp intensity until the sample is visible. Ensure there is no saturation of the camera by selecting the Camera tab in the Focus Window and checking that the histogram of pixel intensities is within the specified range.</li>
	<li>Open the Image Capture window. The 3D Capture settings from the DIC Z-stack acquisition will be displayed.</li>
	<li>In the Filter Set section of the Image Capture window, check the OPEN box and specify exposure time. In the Image Information section, name the image (optional), and select Start to initiate Z-stack image acquisition.</li>
</ol>
4. Exporting Z-stack Images
<ol>
	<li>Open a Z-stack capture. Change the view to 100%. Adjust the histogram of the pixel values to be displayed between 0 and the maximum pixel value of the camera (4,095 for 12 bit cameras, 65,535 for 16 bit.).</li>
	<li>Select View &#62; Export &#62; TIFF Series. This will export the Z-stack as a series of TIFF images (one for each Z plane). Save the TIFF series in a separate folder with a name that has an underscore at the end (i.e.&#160;"DIC Stack 1_"). Repeat this with each DIC or BF Z-stack.</li>
</ol>
5. Volume Measurements
<ol>
	<li>Open the HTDIC MATLAB program entitled "JoVE_HTDIC_v1.m".</li>
	<li>Under Section 0 of the HTDIC program, update the dependencies directory variable. Copy and paste the directory containing the hilbert_transform_dic.m and sobel_edge_detect.m files from explorer (PC) in between the single quotes following "dependencies_directory =". ExecuteSection 0 of the JoVE_HTDIC_v1.m program.</li>
	<li>In Section 1, update the "images_directory". Again, copy and paste the directory containing the through-focus images in .tif form in between the single quotes. ONLY RUN SECTION 1 ONCE.</li>
	<li>Alignment and rotation of images for Hilbert transform Run Section 2 of the code. A dialog box titled "Define HTDIC Parameters" will appear. Five numbers are required from the user: the focal plane number where the DIC image of the sample is in focus, lateral resolution (&#956;m/pixel in the image), the axial resolution (this is 0.1 for image acquisition in 0.1 &#956;m axial steps), the rotation angle of the DIC image needed to perform the Hilbert transform, typical values are 45 and -135. Lastly, enter the region of interest size, this parameter defines the length of a side of a box that will subsequently appear - typical value is 400. Click Ok.</li>
	<li>An image of the DIC focal plane specified by the focal plane number will appear with a blue box. Position the box over the feature of interest, e.g. a cell. The box need not be square. Once the box has been positioned over the desired region, double click inside the box.</li>
	<li>Another figure will now appear: this figure contains a cropped and rotated image of the region of interest selected in the previous step. The contrast of the image should be such that dark features appear on the left while bright features appear on the right. Drag the blue box over the region of interest, reshape as necessary.</li>
	<li>Section 3 generates a mask for the z-stack cube. There are two types of masks available: a rectangular mask to create a rectangle around the cell and a free-hand tool to outline the cell of interest by hand.</li>
	<li>To generate a rectangular mask, uncomment line 167 and comment line 170 (comment a line out by placing a "%" at the beginning of that line). Execute Section 3 of the program. Click in the image and drag the mouse to begin defining the rectangular mask. Double click on the box to accept it.</li>
	<li>To generate a hand-drawn mask, comment line 167 and uncomment line 170 and execute Section 3. Click and draw the desired mask with the mouse. Double click on the mask to accept it.</li>
	<li>Run Section 4to construct the Hilbert transformed DIC image stack and the corresponding DIC image stack of the area of interest. The mask constructed in Section 3 will be applied to the Hilbert transform DIC stack and the regular DIC stack when "maskON" is set to 1 at line 179. Setting "maskON" to 0 will construct image stacks without applying the mask.</li>
	<li>Run Section 5 to optimize the image segmentation of the xz cross sectional images of the region of interest. Figure 500, produced by the program, appears displaying three different types of contrast. The success of the algorithm to find the borders of the cell is reliant on a combination of the mask used and the value of "threshold" at line 229 of the program. Begin with a value of 0.5. Adjust the value of threshold and rerun this section of the program until the proper outlining is achieved in one of the columns.</li>
	<li>If the outlining was best in column 1, use Section 6 to determine the volume using DIC image segmentation. If column 2 gave optimal results, run Section 7 to determine cell volume from Hilbert-transformed DIC imagery. If column 3 gave the optimal results, run Section 8 to determine volume using Fourier-filtered Hilbert-transformed DIC imagery.</li>
	<li>The measured volume of the sample, reported in cubic &#956;m (fl) is presented in the title of Figure 600, 700, or 800 produced by the program depending on which volume measurement is chosen.</li>
</ol>
6. Mass Measurements
<ol>
	<li>Open the NIQPM MATLAB program entitled "JoVE_NIQPM_v1.m".</li>
	<li>Under Section 0 of the NIQPM program, update the location of three directories needed to run the program. These are the "dependencies_directory," the "brightfield_directory," and the "dic_directory."</li>
	<li>Next, run Section 1. This section of code generates a bright field image cube of the full field of the entire set of images. ONLY RUN SECTION 1 ONCE.</li>
	<li>Next, run Section 2. A dialog box titled "Define NIQPM Parameters" will appear. Four numbers are required from the user: the focal plane number where the bright field image of the sample is in focus, lateral resolution (&#956;m/pixel in the image), the axial resolution (this is 0.1 for image acquisition in 0.1 &#956;m axial steps), and the region of interest size, this parameter defines the length of a side of a box that will subsequently appear - a typical value is 200. Click Ok.</li>
	<li>An image of the bright field focal plane specified by the focal plane number will appear with a blue box.
	<ol>
		<li>If the image is not in focus, double click in the blue box and rerun Section 2, be sure to adjust the focal plane number in the dialog box.</li>
		<li>If the image is in focus, drag the blue box around the image and resize it by selecting the nodes of the box and dragging them as necessary. Position the box around the feature of interest, e.g. a cell. The box need not be square. Double click inside the box to accept it.</li>
	</ol>
	</li>
	<li>Next, run Section 3 to construct a stack of bright field images cropped to the region of interest.</li>
	<li>To generate the phase map, pseudo DIC image, and comparisons to bright field imagery and the true DIC image, run Section 4.</li>
	<li>With the pseudo DIC and true DIC images as similar as possible the mass density map, total mass, and histogram of the cell density can be determined by running Section 5a or 5b. Section 5a carries out automated boarder detection of the field - optimize "threshold" at line 300 - typical values vary between 0.1-1. Rerun this section as needed to optimize the value of threshold. Section 5b carries out mass determination, etc. after the user outlines the cell of interest.</li>
</ol>

<ol><li>Zernike, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Das+Phasenkontrastverfahren+bei+der+mikroskopischen+Beobachtung%5BTitle%5D)+AND+%22Z.+Technische+Physik%22%5BJournal%5D)">Das Phasenkontrastverfahren bei der mikroskopischen Beobachtung.</a> Z. Technische Physik. 16, 454-457 (1935).</li>
<li>Zernike, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Phase+contrast%2C+a+new+method+for+the+microscopic+observation+of+transparent+objects%5BTitle%5D)+AND+%22Physica%22%5BJournal%5D)">Phase contrast, a new method for the microscopic observation of transparent objects.</a> Physica. 9 (42), 974-986 (1942).</li>
<li>Blow, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Finding+Phase%5BTitle%5D)+AND+%22Nat.+Cell+Biol%22%5BJournal%5D)">Finding Phase.</a> Nat. Cell Biol. 11, (2009).</li>
<li>Smith, F. H. Microscopic interferometry, Research. 8, 385-395 (1955).</li>
<li>Nomarski, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Microinterf%C3%A9rom%C3%A8tre+diff%C3%A9rentiel+%C3%A0+ondes+polaris%C3%A9es%5BTitle%5D)+AND+%22J.+Phys.+Radium%22%5BJournal%5D)">Microinterféromètre différentiel à ondes polarisées.</a> J. Phys. Radium. 16, (1955).</li>
<li>Lang, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Nomarski+differential-interference+contrast+microscopy%5BTitle%5D)+AND+%22Zeiss+Inform%22%5BJournal%5D)">Nomarski differential-interference contrast microscopy.</a> Zeiss Inform. 70, 114-120 (1968).</li>
<li>Allen, R. D., Allen, N. S., Travis, J. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Video-enhanced+contrast%2C+differential+interference+contrast+%28VEC-DIC%29+microscopy%3A+a+new+method+capable+of+analyzing+microtubule-related+motility+in+the+reticulopodial+network+of+Allogromia+laticollaris%5BTitle%5D)+AND+%22Cell+Motil.+Cytoskel%22%5BJournal%5D)">Video-enhanced contrast, differential interference contrast (VEC-DIC) microscopy: a new method capable of analyzing microtubule-related motility in the reticulopodial network of Allogromia laticollaris.</a> Cell Motil. Cytoskel. 1, 291-302 (1981).</li>
<li>Inoué, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Video+image+processing+greatly+enhances+contrast%2C+quality%2C+and+speed+in+polarization-based+microscopy%5BTitle%5D)+AND+%22J.+Cell+Biol%22%5BJournal%5D)">Video image processing greatly enhances contrast, quality, and speed in polarization-based microscopy.</a> J. Cell Biol. 89, 346-356 (1981).</li>
<li>Aslan, J. E., Itakura, A., Gertz, J. M., McCarty, O. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Platelet+shape+change+and+spreading%5BTitle%5D)+AND+%22Methods+Mol.+Biol%22%5BJournal%5D)">Platelet shape change and spreading.</a> Methods Mol. Biol. , 10-1007 (2012).</li>
<li>Barer, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Interference+microscopy+and+mass+determination%5BTitle%5D)+AND+%22Nature%22%5BJournal%5D)">Interference microscopy and mass determination.</a> Nature. 169, 366-367 (1038).</li>
<li>Ross Barer, R., Tkaczyk, K. F. A., S, <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Refractometry+of+living+cells%5BTitle%5D)+AND+%22Nature%22%5BJournal%5D)">Refractometry of living cells.</a> Nature. 171, 720-724 (1953).</li>
<li>Preza, C., Snyder, D. L., Conchello, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Theoretical+development+and+experimental+evaluation+of+imaging+models+for+differential+interference+contrast+microscopy%5BTitle%5D)+AND+%22J.+Opt.+Soc.+Am.+A%22%5BJournal%5D)">Theoretical development and experimental evaluation of imaging models for differential interference contrast microscopy.</a> J. Opt. Soc. Am. A. 16, 2185-2199 (1999).</li>
<li>Arnison, M. R., Larkin, K. G., Sheppard, C. J., Smith, N. I., Cogswell, C. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Linear+phase+imaging+using+differential+interference+contrast+microscopy%5BTitle%5D)+AND+%22J.+Microsc%22%5BJournal%5D)">Linear phase imaging using differential interference contrast microscopy.</a> J. Microsc. 214, 7-12 (2004).</li>
<li>Van Munster, E. B., Van Vliet, L. J., Aten, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Reconstruction+of+optical+pathlength+distributions+from+images+obtained+by+a+wide%E2%80%90field+differential+interference+contrast+microscope%5BTitle%5D)+AND+%22J.+Microsc%22%5BJournal%5D)">Reconstruction of optical pathlength distributions from images obtained by a wide‐field differential interference contrast microscope.</a> J. Microsc. 188, 149-157 (1997).</li>
<li>Kou, S. S., Waller, L., Barbastathis, G., Sheppard, C. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Transport-of-intensity+approach+to+differential+interference+contrast+%28TI-DIC%29+microscopy+for+quantitative+phase+imaging%5BTitle%5D)+AND+%22Opt.+Lett%22%5BJournal%5D)">Transport-of-intensity approach to differential interference contrast (TI-DIC) microscopy for quantitative phase imaging.</a> Opt. Lett. 35, 447-449 (2010).</li>
<li>Xu, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Scattering-phase+theorem%3A+anomalous+diffraction+by+forward-peaked+scattering+media%5BTitle%5D)+AND+%22Opt.+Exp%22%5BJournal%5D)">Scattering-phase theorem: anomalous diffraction by forward-peaked scattering media.</a> Opt. Exp. 19, 21643-21651 (2011).</li>
<li>Duncan, D. D., Fischer, D. G., Dayton, A., Prahl, S. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Quantitative+Carr%C3%A9+differential+interference+contrast+microscopy+to+assess+phase+and+amplitude%5BTitle%5D)+AND+%22J.+Opt.+Soc.+Am.+A%22%5BJournal%5D)">Quantitative Carré differential interference contrast microscopy to assess phase and amplitude.</a> J. Opt. Soc. Am. A. 28, 1297-1306 (2011).</li>
<li>Barty, A., Nugent, K. A., Paganin, D., Roberts, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Quantitative+optical+phase+microscopy%5BTitle%5D)+AND+%22Opt.+Lett%22%5BJournal%5D)">Quantitative optical phase microscopy.</a> Opt. Lett. 23, 817-819 (1998).</li>
<li>Paganin, D., Nugent, K. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Non-interferometric+phase+imaging+with+partially+coherent+light%5BTitle%5D)+AND+%22Phys.+Rev.+Lett%22%5BJournal%5D)">Non-interferometric phase imaging with partially coherent light.</a> Phys. Rev. Lett. 80, 2586-2589 (1998).</li>
<li>Frank, J., Altmeyer, S., Wernicke, G. N. on-interferometric <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((non-iterative+phase+retrieval+by+Green%E2%80%99s+functions%5BTitle%5D)+AND+%22J.+Opt.+Soc.+Am.+A%22%5BJournal%5D)">non-iterative phase retrieval by Green’s functions.</a> J. Opt. Soc. Am. A. 27, 2244-2251 (2010).</li>
<li>Phillips, K. G., Velasco, C. R., Li, J., Kolatkar, A., Luttgen, M., Bethel, K., Duggan, B., Kuhn, P., McCarty, O. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Optical+quantification+of+cellular+mass%2C+volume%2C+and+density+of+circulating+tumor+cells+identified+in+an+ovarian+cancer+patient%5BTitle%5D)+AND+%22Front.+Oncol%22%5BJournal%5D)">Optical quantification of cellular mass, volume, and density of circulating tumor cells identified in an ovarian cancer patient.</a> Front. Oncol. 2, 1-8 (2012).</li>
<li>Phillips, K. G., Jacques, S. L., McCarty, O. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Measurement+of+single+cell+refractive+index%2C+dry+mass%2C+volume%2C+and+density+using+a+transillumination+microscope%5BTitle%5D)+AND+%22Phys.+Rev.+Lett%22%5BJournal%5D)">Measurement of single cell refractive index, dry mass, volume, and density using a transillumination microscope.</a> Phys. Rev. Lett. 109, 1-5 (2012).</li>
<li>Park, Y. K., Diez-Silva, M., Popescu, G., Lykotrafitis, G., Choi, W., Feld, M. S., Suresh, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Refractive+index+maps+and+membrane+dynamics+of+human+red+blood+cells+parasitized+by+Plasmodium+falciparum%5BTitle%5D)+AND+%22%22%5BJournal%5D)">Refractive index maps and membrane dynamics of human red blood cells parasitized by Plasmodium falciparum.</a> , 105-13730 (2008).</li>
<li>Mir, M., Wang, Z., Shen, Z., Bednarz, M., Bashir, R., Golding, I., Popescu, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Optical+measurement+of+cycle-dependent+cell+growth%5BTitle%5D)+AND+%22Proc.+Natl.+Acad.+Sci.+U.S.A%22%5BJournal%5D)">Optical measurement of cycle-dependent cell growth.</a> Proc. Natl. Acad. Sci. U.S.A. 108, 13124-13129 (2011).</li>
<li>Popescu, G., Ikeda, T., Goda, K., Best-Popescu, C. A., Laposata, M., Manley, S., Feld, M. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Optical+measurement+of+cell+membrane+tension%5BTitle%5D)+AND+%22Phys.+Rev.+Lett%22%5BJournal%5D)">Optical measurement of cell membrane tension.</a> Phys. Rev. Lett. 97, 1-4 (2006).</li>
<li>Popescu, G., Ikeda, T., Dasari, R. R., Feld, M. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Diffraction+phase+microscopy+for+quantifying+cell+structure+and+dynamics%5BTitle%5D)+AND+%22Opt.+Lett%22%5BJournal%5D)">Diffraction phase microscopy for quantifying cell structure and dynamics.</a> Opt. Lett. 31, 775-777 (2006).</li>
<li>Choi, W., Fang-Yen, C., Badizadegan, K., Oh, S., Lue, N., Dasari, R. R., Feld, M. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Tomographic+phase+microscopy%5BTitle%5D)+AND+%22Nat.+Methods%22%5BJournal%5D)">Tomographic phase microscopy.</a> Nat. Methods. 4 (9), 717-719 (2007).</li>
<li>Charrière, F., Marian, A., Montfort, F., Kuehn, J., Colomb, T., Cuche, E., Depeursinge, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Cell+refractive+index+tomography+by+digital+holographic+microscopy%5BTitle%5D)+AND+%22Opt.+Lett%22%5BJournal%5D)">Cell refractive index tomography by digital holographic microscopy.</a> Opt. Lett. 31, 178-180 (2006).</li>
<li>Joo, C., Akkin, T., Cense, B., Park, B. H., de Boer, J. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Spectral-domain+optical+coherence+phase+microscopy+for+quantitative+phase-contrast+imaging%5BTitle%5D)+AND+%22Opt.+Lett%22%5BJournal%5D)">Spectral-domain optical coherence phase microscopy for quantitative phase-contrast imaging.</a> Opt. Lett. 30, 2131-2133 (2005).</li>
<li>Wang, Z., Millet, L., Mir, M., Ding, H., Unarunotai, S., Rogers, J., Popescu, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Spatial+light+interference+microscopy%5BTitle%5D)+AND+%22SLIM%29.+Opt.+Exp%22%5BJournal%5D)">Spatial light interference microscopy.</a> SLIM). Opt. Exp. 19, 1016-1026 (2011).</li>
<li>Ikeda, T., Popescu, G., Dasari, R. R., Feld, M. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Hilbert+phase+microscopy+for+investigating+fast+dynamics+in+transparent+systems%5BTitle%5D)+AND+%22Opt.+Lett%22%5BJournal%5D)">Hilbert phase microscopy for investigating fast dynamics in transparent systems.</a> Opt. Lett. 30, 1165-1167 (2005).</li>
<li>Shaked, N. T., Rinehart, M. T., Wax, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Dual-interference-channel+quantitative-phase+microscopy+of+live+cell+dynamics%5BTitle%5D)+AND+%22Opt.+Lett%22%5BJournal%5D)">Dual-interference-channel quantitative-phase microscopy of live cell dynamics.</a> Opt. Lett. 34, 767-769 (2009).</li>
<li>Popescu, G., Park, Y., Lue, N., Best-Popescu, C., Deflores, L., Dasari, R. R., Badizadegan, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Optical+imaging+of+cell+mass+and+growth+dynamics%5BTitle%5D)+AND+%22Am.+J.+Physiol.+Cell+Physiol%22%5BJournal%5D)">Optical imaging of cell mass and growth dynamics.</a> Am. J. Physiol. Cell Physiol. 295, (2008).</li>
<li>Arnison, M. R., Cogswell, C. J., Smith, N. I., Fekete, P. W., Larkin, K. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Using+the+Hilbert+transform+for+3D+visualization+of+differential+interference+contrast+microscope+images%5BTitle%5D)+AND+%22J.+Microsc%22%5BJournal%5D)">Using the Hilbert transform for 3D visualization of differential interference contrast microscope images.</a> J. Microsc. 199, 79-84 (2001).</li>
<li>Baker, S. M., Phillips, K. G., McCarty, O. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Development+of+a+label-free+imaging+technique+for+the+quantification+of+thrombus+formation%5BTitle%5D)+AND+%22Cell.+Mol.+Bioeng%22%5BJournal%5D)">Development of a label-free imaging technique for the quantification of thrombus formation.</a> Cell. Mol. Bioeng. 5, 488-492 (2012).</li>
</ol>

The authors have no financial interests in the work presented.

In general, NIQPM is a diffraction-limited technique validated on optical path-lengths ranging from 0.25-44.7. Validation was performed on n = 1.596 polystyrene spheres ranging in diameter from 0.11-9.8 &#956;m suspended in Fluoromount&#160;G (data not shown). Cells possess optical path-lengths that range from nearly 0-7.
When measuring the density distribution of a specimen one may find that the pseudo DIC image looks fine while the density map possesses unwanted background contributions. Thi...

The use of optical microscopy is now ubiquitous in the investigation of cellular organisms. Due to their low endogenous absorbance and weak scattering properties over the visible optical spectrum, cells do not strongly affect the amplitude of optical waves traversing them and thus appear semitransparent when imaged with standard bright field microscopes. Cellular specimens do, however, slow down optical waves traveling through them in a manner that is linearly related to the amount of local mass density in a particular region of space through which the light travels. Utilization of this heterogeneous time lag or &#8220;phase&#8221; profile of optical waves transmitted through microscopic specimens was first described in 1935 by Frits Zernike1 and experimentally realized by Zernikein 19422. Zernike was awarded the Nobel prize in 1953 for this achievement. Zeiss commercialized this modality in 19453.&#160;In 1955, Smith and Nomarski would present their initial work on the use4 and theory5 of differential interference contrast (DIC) microscopy, a modality that uses the spatial gradient of phase as a contrast mechanism. DIC was commercialized by Zeiss in 1965in close collaboration with Nomarski6. In 1981, two laboratories demonstrated the first recorded live cell DIC imagery with the incorporation of video cameras into the optics train of the DIC microscope7,8. The era of live cell imaging was born.
Since this time, the execution of both phase contrast and DIC on commercial microscopes has largely been unchanged. These methods are principally utilized by biologists to produce images of cells for qualitative purposes: monitoring of morphology, tracking of subcellular structures, and investigations of membrane dynamics9. These techniques are qualitative in their &#8220;off-the-shelf&#8221; configuration as both phase and DIC images are arbitrary functions of the light source intensity, the illumination optics settings, and CCD camera gain, gamma, and exposure settings.
A small legion of physicists and optical engineers has endeavored to make commercial imaging modalities quantitative. Among the first efforts were two letters to Nature in 1952 and 1953 in which the physician-turned-biophysicist Robert Barer demonstrated the use of phase microscopy to determine cellular dry mass of cells by estimating phase shifts through these cell types using a commercially available phase microscope10,11.&#160;The field has developed a multitude of techniques over the ensuing years based around three basic label-free contrast mechanisms: phase microscopy10,11, DIC microscopy12-17, and bright field18-22 to determine optical path-length, phase, mass density, refractive index, and cellular volume.
In parallel, a large collection of custom optical instruments have also been developed since the 1950s, and have made far-reaching optical measurements ranging from applications in parasite growth23, to documenting the cell cycle24 to investigating membrane dynamics of red blood cells25.&#160;In particular, the past ten years has seen a wealth of label-free quantitative microscopy in the form of diffraction phase microscopy26, tomographic phase microscopy27, digital holographic microscopy28, phase sensitive optical coherence microscopy29, spatial light interference microscopy30, Hilbert phase microscopy31, and quantitative phase microscopy32. Despite their collective successes, these instruments have not been disseminated to the larger field of biological researchers owing, mostly, to their complex instrumentation and computational requirements.
Herein we describe the use of a standard optical microscope to perform quantitative measurements of mass, volume, and density on cellular specimens through a combination of bright field and DIC imagery. Two primary approaches are presented: noninterferometric quantitative phase microscopy (NIQPM), to perform measurements of total cell mass and subcellular density distribution, and Hilbert transform differential interference contrast microscopy (HTDIC), to determine volume. The primary advantages of NIQPM and HTDIC lay in their technological accessibility. The imaging conditions required for their successful execution are within the scope of normal operation of most commercially available microscopes. Additionally, the post-processing algorithms are stable, quick, and robust &#8211; having been implemented in MATLAB using fast Fourier transform (FFT) based algorithms whenever possible.
NIQPM is a method to reconstruct phase and the axially integrated mass density of cellular specimens from bright field imagery. Summation of this axially integrated mass density over the area of the specimen gives the total dry mass content of the specimen. The NIQPM protocol is based on the experimental foundations laid by Paganin and Nugent18,19 &#8211; in which it was demonstrated that the phase profile of a cell could be reconstructed from through-focus bright field imagery of the sample &#8211; and the theoretical work of Frank, Altmeyer, and Wernicke20 &#8211; on solving the paraxial wave models in an efficient FFT-based manner. The connection of phase to the dry mass density is based upon the work by Barer10,11 and Popescu33.
Volumetric information can be obtained from through-focus DIC imagery under high NA illumination conditions that enable optical sectioning of the specimen along the optical axis. Hilbert transform processing on the DIC image stacks greatly enhances edge detection algorithms for localization of the specimen borders in three dimensions by separating the gray values of the specimen intensity from those of the background. This work originates with Arinson&#160;et al.34 although we have introduced both Fourier filtering methods to enhance contrast and a Sobel-based edge detection method for automated volumetric analysis of the sample. We have also validated HTDIC previously on polystyrene spheres ranging in size from the diffraction limit up to 20 &#956;m in diameter36.
While both NIQPM and HTDIC are technologically accessible owing to their development on commercial microscopes, the methods are fundamentally limited by the hardware configuration of the microscopes themselves. The primary limitations of these techniques are two-fold: slow z-stack acquisition time on commercial scopes, due to translation of the entire sample stage as opposed to just the objective lens, currently limits the investigation of phenomena faster than roughly 1 frame/minute, and secondly, diffraction effects restrict the utility of NIQPM and HTDIC to objects ranging in size from 0.2 up to 10 and 20 &#956;m in diameter, respectively. Hence, the specimen and its associated time dynamics of interest must meet certain size and temporal constraints to enable the use of these methods on typical &#8220;off-the-shelf&#8221; instruments. Excitingly, most fixed cellular specimens are readily investigated with these methods.
An overview of the NIQPM and HTDIC protocols are given in Figure 1. In Figure 2 we illustrate optimal and suboptimal through-focus imaging under both low and high NA illumination conditions for both bright field and DIC imagery. Figures 3 and 4 demonstrate the parameter dependence of the NIQPM algorithm highlighting successful and unsuccessful implementations. Figure 5 illustrates the steps involved in the HTDIC image-processing algorithm and demonstrates the optimal implementation of the algorithm to determine cellular volume.

<table><tbody><tr><td>Zeiss Axio Imager 2 microscope</td><td>Carl Zeiss MicroImaging GmbH, Germany</td><td>Axio Imager D2</td><td>Microscope</td></tr><tr><td>Green filter (&amp;lambda; = 540 &amp;plusmn; 25 nm)</td><td>Chroma Technology Corp., Bellows Falls, Vermont</td><td>D540/25x</td><td>Green filter</td></tr><tr><td>SlideBook 5.5 software</td><td>Intelligent Imaging Innovations, Denver, Colorado</td><td></td><td>Image acquistion software</td></tr><tr><td>Polystyrene microspheres</td><td>Bangs Laboratory, Inc., Fishers, IN</td><td>PS06N</td><td>Polystyrene spheres</td></tr><tr><td>Fluoromount-G</td><td>SouthernBiotech, Birmingham, Alabama</td><td>0100-01</td><td>Mounting media</td></tr></tbody></table>

quantitative optical microscopy: measurement of cellular biophysical features with a standard optical microscope

Quantitative Optical Microscopy: Measurement of Cellular Biophysical Features with a Standard Optical Microscope

We describe the use of a standard optical microscope to perform quantitative measurements of mass, volume, and density on cellular specimens through a combination of bright field and differential interference contrast imagery. Two primary approaches are presented: noninterferometric quantitative phase microscopy (NIQPM), to perform measurements of total cell mass and subcellular density distribution, and Hilbert transform differential interference contrast microscopy (HTDIC)&#160;to determine volume. NIQPM is based on a simplified model of wave propagation, termed the paraxial approximation, with three underlying assumptions: low numerical aperture (NA) illumination, weak scattering, and weak absorption of light by the specimen. Fortunately, unstained cellular specimens satisfy these assumptions and low NA illumination is easily achieved on commercial microscopes. HTDIC is used to obtain volumetric information from through-focus DIC imagery under high NA illumination conditions. High NA illumination enables enhanced sectioning of the specimen along the optical axis. Hilbert transform processing on the DIC image stacks greatly enhances edge detection algorithms for localization of the specimen borders in three dimensions by separating the gray values of the specimen intensity from those of the background. The primary advantages of NIQPM and HTDIC lay in their technological accessibility using &#8220;off-the-shelf&#8221; microscopes. There are two basic limitations of these methods: slow z-stack acquisition time on commercial scopes currently abrogates the investigation of phenomena faster than 1 frame/minute, and secondly, diffraction effects restrict the utility of NIQPM and HTDIC to objects from 0.2 up to 10 (NIQPM) and 20 (HTDIC) &#956;m in diameter, respectively. Hence, the specimen and its associated time dynamics of interest must meet certain size and temporal constraints to enable the use of these methods. Excitingly, most fixed cellular specimens are readily investigated with these methods.

Correct sample illumination during through-focus image acquisition is critical to the successful implementation of the NIQPM and HTDIC algorithms. In Figure 2 we illustrate low and high NA illumination under both DIC and bright field contrast for a polystyrene sphere and the human colorectal adenocarcinoma cell line SW620. Figures 2A, 2C, 2I, and 2K demonstrate optimal imaging for NIQPM. Figures 2F, 2H, 2N, and 2P demons...

We describe the use of a standard optical microscope to perform quantitative measurements of cellular mass, volume, and density through a combination of bright field and differential interference contrast imagery.

We describe the use of a standard optical microscope to perform quantitative measurements of mass, volume, and density on cellular specimens through a ...

The overall goal of this procedure is to quantify basic physical features of cellular specimens, including mass and volume, with a standard optical microscope and image processing. This is accomplished by first mounting cellular specimens grown on glass cover slips on microscope slides. Next through focus brightfield and differential interference contrast images are obtained.Then each Z stack of images is input into separate MATLAB image processing programs that extract the physical data. Ultimately, the basic physical properties of cellular specimens are obtained using through focus intensity measurements, under brightfield contrast and differential interference contrast microscopy. The main advantage of this technique over existing methods like fluorescence microscopy, is that cellular specimens need not be fixed, permeated, or stained.This method can help answer key questions in the cell biology field, such as how is subcellular density organized during the cell cycle or among different cell populations contributing to a disease state Using a microscope with both DIC and brightfield capabilities and additional specifications according to the text protocol begin by opening slide book software and creating a new slide for image collection. Next, open the focus window and under the filter set section select DIC On the scope tab under the condenser section, adjust the aperture slide bar to the furthest right position. This provides high numerical aperture illumination and enhances optical sectioning of the specimen.After capturing a DIC stack of the sample, open the focus window and select open. Under the filter set section, adjust the aperture slide bar to the furthest left position closed all the way to provide low NA illumination. Following adjustment of the signal intensity, open the image capture window.The 3D capture settings from the DICZ stack acquisition will be displayed in the filter set section of the image capture window. Check the open box and specify exposure time. In the image information section, name the image and select start to initiate Zack image acquisition.Then export the Z stacks according to the text protocol to carry out volume measurements once in the H-T-D-I-C MATLAB program entitled JoVE HT DCO V one M Under section zero, update the dependencies directory variable by copying and pasting the directory containing the hilbert. Transform DM and sobel edge Detect M files from explorer. In between the single quotes following dependencies directory equals execute section zero of the joco HT DCO V one M program.In section one, update the images directory by copying and pasting the directory containing the through focus images in dot TIF form. In between the single quotes only run this section once to align and rotate images. For hilbert transform run section two of the code A dialogue box titled Define HT DIC parameters will appear.Then enter the focal plane number where the DIC image of the sample is in focus, the lateral resolution, the axial resolution, the rotation angle of the DIC image needed to perform the hilbert transform, and lastly, the region of interest size. Then click Okay. An image of the DIC focal plane specified by the focal plane number will appear with a blue box.Position the box over the feature of interest such as a cell. Once the box has been positioned over the desired region, double click inside the B.The contrast of the image should be such that dark features appear on the left while bright features appear on the right. Drag the blue box over the region of interest and reshape as necessary.Next, under section three, to generate a rectangular mask, un comment line 1 6 7 and comment line 1 7 0 execute section three of program by clicking in the image and dragging the mouse to begin defining the rectangular mask. Then double click on the box to accept it. To generate a hand drawn mask, comment line 1 6 7 and un comment line 1 7 0 before executing section three By clicking and drawing the desired mask with the mouse, double click on the mask to accept it after running Section four, to construct hilbert transformed image stacks according to the text protocol runs section five.To optimize the image segmentation of the xz cross-sectional images of the region of interest. Figure 500 produced by the program appears displaying three different types of contrast. The success of the algorithm to find the borders of the cell is reliant on a combination of the mask used and the value of threshold at line 2, 2, 9 of the program begin with a value of 0.5 and adjust the value of the threshold and rerun this section of the program until the proper outlining is achieved in one of the columns.If the outlining was best in column one, in DIC segmentation, use section six to determine the volume. If column two gave optimal results, run section seven to determine cell volume from hilbert, transform DIC imagery IF column three gave the optimal results, use forer filtered hilbert transform DIC imagery while running section eight to determine volume for taking mass measurements in the NIQ PM MATLAB program and titled JO VCO NI qpm V1 M Under section zero. Update the location of the three directories dependencies, BRIGHTFIELD and DIC directory after running section one, run section two in the dialogue box titled define N-I-Q-P-M parameters enter the focal plane number where the bright field image of the sample is in focus, the lateral resolution, the axial resolution, and the region of interest size.Then click Okay. An image of the brightfield focal plane specified by the focal plane number will appear with a blue box. After adjusting the focus if necessary by rerunning section two, drag the box around the image and select the nodes of the box and drag it to resize it before double clicking inside the box to accept it.Once a stack of brightfield images have been constructed by running section three, run section four to generate the phase map, pseudo DIC images and comparisons to brightfield imagery and the true DIC image when the pseudo DIC and true DIC images are as similar as possible, run section five A or five B that allows the user to outline the cell to generate the mass density map, the total mass and the histogram of the cell density correct. Sample illumination during through focus image acquisition is critical to the successful implementation of the N-I-Q-P-M and H-T-D-I-C algorithm. This figure illustrates low and high NA illumination under both DIC and brightfield contrast for a polystyrene sphere and the human colorectal adenocarcinoma cell line SW six 20.These panels demonstrate optimal imaging for N-I-Q-P-M and these display optimal imaging for HT DIC. These images demonstrate the parameter dependence of the NIQ PM algorithm highlighting both successful and unsuccessful implementations. Here we explore the phase profile of a 4.8 micrometer diameter polystyrene sphere.The expected profile is known theoretically and can thus be compared directly to the NIQ PM reconstruction. These panels present the best reconstruction obtainable for the sphere diffraction effects at both the boundaries of the sphere and inside prevent stable reconstruction at all points on the sphere. The central region of the sphere can be captured with N-I-Q-P-M with a percent error of one to 5%as seen in Panel L cellular specimens whose phase properties are not known.A priori can be reconstructed using NIQ PMM in conjunction with a procedure to compare a pseudo DIC image to an actual DIC image. N-I-Q-P-M has one free parameter. The plane in the right field image stack at which the calculation is centered.This central focal plane should be adjusted until the pseudo DIC and true DIC images look as similar as possible. Presented here are an out of focus pseudo DIC image, an optimal pseudo DIC image and the corresponding DIC image of the cell taken with an illumination NA of 0.9. Interestingly, the best phase map and corresponding pseudo DIC image do not necessarily correspond to an in-focus bright field image as shown in these panels.Lastly, shown here are the steps involved in the H-T-D-I-C image processing algorithm from the DIC through focus imagery under NA equals 0.9 illumination, the hilbert transform is performed to remove the base relief of the DIC images. This comes with some blurring along the optical axis that can be removed from high pass forer filtering. These final images are easily segmented to determine the area in each cross-sectional plane of the specimen to infer the total cellular volume.While attempting this procedure, it's important to remember the correct illumination for brightfield ore differential contrast imaging following this procedure. Other methods like fluorescence microscopy can be performed in order to answer additional questions using colocalization of floor force with density maps of the specimen.

quantitative-optical-microscopy-measurement-cellular-biophysical

Research

JoVE Journal

Bioengineering

We demonstrate a dark-field microscopy method based on Gabor-like filtering to measure subcellular dynamics within single living cells. The technique is sensitive to alterations in the structure of organelles, such as mitochondrial fragmentation.

Optical Scatter Microscopy Based on Two-Dimensional Gabor Filters

We developed a software platform that utilizes Imaris Neuroscience, ImarisXT and MATLAB to measure the changes in morphology of an undefined shape taken from three-dimensional confocal fluorescence of single cells. This novel approach can be used to quantify changes in cell shape following receptor activation and therefore represents a possible additional tool for drug discovery.

An Analytical Tool that Quantifies Cellular Morphology Changes from Three-dimensional Fluorescence Images

This manuscript describes a method to visualize and quantify localized translation events in subcellular compartments. The approach proposed in this manuscript requires a basic confocal imaging system and reagents and is rapid and cost-effective.

Quantitative Immunofluorescence to Measure Global Localized Translation

Lens-free video microscopy enables us to monitor cell cultures directly inside the incubator. Here we describe the full protocol used to acquire and analyze a 2.7 day long acquisition of cultured HeLa cells, leading to a dataset of 2.2 x 106 measurements of individual cell morphology and 10584 cell cycle tracks.

Lens-free Video Microscopy for the Dynamic and Quantitative Analysis of Adherent Cell Culture

Here we describe optical acquisition and characterization of action potentials from induced pluripotent stem cell derived cardiomyocytes using a high-speed modular photometry system.

Single-Cell Optical Action Potential Measurement in Human Induced Pluripotent Stem Cell-Derived Cardiomyocytes

Here, we present a protocol to investigate the intracellular mechanical properties of isolated embryonic zebrafish cells in three-dimensional confinement with direct force measurement by an optical trap.

Direct Force Measurements of Subcellular Mechanics in Confinement using Optical Tweezers

Here, an integrated protocol based on optical tweezers and defocusing microscopy is described to measure the rheological properties of cells. This protocol has wide applicability in studying the viscoelastic properties of erythrocytes under variable physio-pathological conditions.

Quantitative Analysis of Viscoelastic Properties of Red Blood Cells Using Optical Tweezers and Defocusing Microscopy

Utilizing a multimodal platform combining label-free optical imaging modalities, we have developed a protocol for visualizing and quantifying cellular dynamics and metabolism. Through imaging via multiphoton fluorescence, second harmonic generation, and stimulated Raman scattering microscopy, we can generate a holistic overview of the cellular and molecular environment.

Multimodal Optical Imaging Platform for Studying Cellular Metabolism

Optical-resolution photoacoustic microscopy (OR-PAM) is an emerging technology capable of imaging optical absorption contrasts in vivo with cellular resolution and sensitivity. Here, we provide a visualized instruction on the experimental protocols of OR-PAM, including system configuration, system alignment, typical in vivo experimental procedures, and functional imaging schemes.

Three-dimensional Optical-resolution Photoacoustic Microscopy

A method to track cell fusion in living organisms over time is described.  The approach utilizes Cre-LoxP recombination to induce luciferase expression upon cell fusion.  The luminescent signal generated can be detected in living organisms using biophotonic imaging systems with a sensitivity of detection of ˜1,000 cells in peripheral tissues.

A Cre-Lox P Recombination Approach for the Detection of Cell Fusion In Vivo

Learn to quantify cellular mass, volume, and density using a standard optical microscope with bright field and differential interference contrast imaging. This non-invasive method enables live cell analysis without fixation or staining.

Quantitative Optical Microscopy: Measurement of Cellular Biophysical Features with a Standard Optical Microscope

Explore More Videos