13.1
عندما يمر الإشعاع الكهرومغناطيسي عبر مادة، تنتقل الذرات أو الجزيئات من حالة طاقة أقل إلى حالة طاقة أعلى عن طريق امتصاص الإشعاع الذي يتوافق مع فرق الطا…
عند تمرير إشعاع الأشعة تحت الحمراء عبر الجزيئات ، تمتص ذراتها المترابطة تساهمية الإشعاع يتراوح طوله الموجي بين 2.5 إلى 25 ميكرومتر أثناء انتقالها من مستويات طاقة اهتزازية منخفضة إلى أعلى.
تسمىالاهتزازات الجزيئية التي تنتج تغييرا جوهريا في عزم ثنائي القطب الرابطة بالأشعة تحت الحمراء النشطة.
يتم التعبير عن إشعاع الأشعة تحت الحمراء بالسنتيمترات العكسية التي تمثل الرقم الموجي الطيفي المحسوب على أنه مقلوب الطول الموجي بالسنتيمتر.
باستخدام صيغة سرعة الضوء، الطول الموجي، λ، يساوي سرعة الضوء، c مقسوما على تردده، v.
يوضحاستبدال الطول الموجي λ أن إشعاع الأشعة تحت الحمراء يتناسب مع التردد مقسوما على سرعة الضوء في هذا الوسط.
تتوافق الترددات من 4000 إلى 400 سم −1 مع المنطقة الاهتزازية للطيف الأشعة تحت الحمراء.
يستخدم التحليل الطيفي بالأشعة تحت الحمراء لتحديد المجموعات الوظيفية الموجودة في الجزيء.
View the full transcript and gain access to JoVE Core videos
Q1: What wavelength range does IR spectroscopy cover?
Infrared spectroscopy operates in the 2.5 to 25 micrometer wavelength range, which corresponds to the vibrational region of the IR spectrum expressed as 4000 to 400 cm⁻¹ in wavenumber units. This range captures the frequencies at which molecular vibrations absorb IR radiation and transition between vibrational energy levels.
Q2: What does it mean for a molecule to be IR active?
A molecule is IR active when its vibrations produce a substantial change in bond dipole moment during absorption of IR radiation. For effective IR absorption, molecular vibrations must fluctuate the dipole moments, allowing the molecule to interact with the electromagnetic field of IR light and transition to higher vibrational energy levels.
Q3: How is IR radiation expressed in spectroscopy units?
IR radiation is expressed in inverse centimeters, representing the spectroscopic wavenumber calculated as the reciprocal of wavelength in centimeters. Using the relationship between wavelength, frequency, and the speed of light, IR radiation wavenumber is proportional to frequency divided by the speed of light in that medium.
Q4: Why is IR spectroscopy useful for identifying functional groups?
Different functional groups absorb IR radiation at varying frequencies, making the IR spectrum similar to a molecular fingerprint. Since each compound displays unique vibrational frequencies based on its functional groups, IR spectroscopy enables qualitative analysis by comparing an unknown compound's vibrational frequencies with known reference compounds.
Q5: How does IR spectroscopy determine molecular structure?
When electromagnetic radiation passes through a molecule, atoms absorb IR radiation corresponding to the energy difference between lower and higher vibrational energy states. By analyzing which frequencies are absorbed and their intensities, IR spectroscopy reveals the functional groups present and their arrangement, allowing determination of molecular structure.
Q6: Can IR spectroscopy measure the concentration of a substance?
Yes, IR spectroscopy can determine substance concentration through quantitative analysis using the Beer-Lambert law, which states that absorbance is proportional to concentration. This quantitative application complements IR's primary use in qualitative functional group identification for both organic and inorganic compounds.
Q7: What happens when IR radiation passes through a molecule?
When IR radiation passes through a molecule, covalently bonded atoms absorb radiation between 2.5 to 25 micrometers in wavelength, causing transitions from lower to higher vibrational energy levels. Only IR-active vibrations that change the bond dipole moment produce observable absorption peaks in the IR spectrum.