مقياس فرق الجهد

A potentiometer is a null measurement device that balances voltages without allowing current to flow through the measuring device, eliminating circuit alterations. In contrast, voltmeters draw small currents to operate, which affects the circuit and introduces measurement errors. By achieving zero deflection on a galvanometer, the potentiometer measures the true electromotive force without distorting the circuit.

A potentiometer consists of a voltage source connected to a long, uniform resistive wire of constantan or magnum, a rheostat to regulate current flow, a galvanometer to detect balance, and a jockey to adjust the contact point. The voltage source maintains a constant current and uniform potential gradient across the wire, while the galvanometer indicates when the unknown emf equals the potential drop.

The potentiometer balances the unknown emf against a known potential drop across a wire segment. When the contact point is adjusted so that these voltages are equal, the galvanometer shows zero deflection, indicating no current flows through the measuring circuit. This null measurement condition ensures the circuit remains unaltered during the measurement process.

First, connect the unknown emf source with a galvanometer and jockey, then adjust the contact point until the galvanometer shows zero deflection and record this balanced length. Next, replace the unknown source with a standard emf source and adjust the contact point again for zero deflection. The ratio of the two balanced lengths gives the unknown emf in terms of the wire segment resistances.

A uniform potential gradient ensures that the potential drop across any segment of wire is directly proportional to its length and resistance. This linear relationship allows the potentiometer to accurately calculate unknown emf values from the balanced lengths, making the measurement reliable and independent of absolute resistance values.

A potentiometer can measure the internal resistance of a cell by comparing the terminal voltage under load with the open-circuit emf. It can also compare the electromotive force of two voltage sources by balancing each against the same standard reference, providing accurate relative measurements without drawing significant current.

Standard voltmeters measure only terminal voltage and require knowledge of internal resistance for accurate emf determination. The potentiometer eliminates this requirement by achieving zero current flow, making the internal resistance irrelevant. This null measurement approach provides direct emf measurement without needing to account for voltage drops caused by the measuring device itself.