Plexiglass Manifold Seal
Plexiglass Manifold Seal - Related Videos
04:41
Optimized Sealing Process and Real-Time Monitoring of Glass-to-Metal Seal Structures
0 Views •
Cited by 7 •
2019
Key procedures to optimize the sealing process and achieve real-time monitoring of the metal-to-glass seal (MTGS) structure are described in detail. The embedded fiber Bragg grating (FBG) sensor is designed to achieve online monitoring of temperature and high-level residual stress in the MTGS with simultaneous environmental pressure monitoring.
07:51
The C-seal: A Biofragmentable Drain Protecting the Stapled Colorectal Anastomosis from Leakage
0 Views •
Cited by 8 •
2010
The C-seal is a biofragmentable drain protecting the stapled colorectal anastomosis. In this video, details of the manufacturing, deployment and use are shown.
06:10
Accessible Silicone Chip-to-Membrane Sealing Procedure for Flexible, Reliable Bonding
0 Views •
2026
A novel sealing protocol to produce water-tight silicone-based seals for membranes of Polydimethylsiloxane (PDMS) chip devices. Intended for labs setting-up chip models and small-scale chip platform development. We demonstrate the protocol using plastic and native tissue membranes. This procedure only requires PDMS, toluene, mold, membrane, and a vacuum chamber.
06:26
Achieving Moderate Pressures in Sealed Vessels Using Dry Ice As a Solid CO2 Source
0 Views •
Cited by 11 •
2018
Here we present a protocol for performing reactions in simple reaction vessels under low-to-moderate pressures of CO2. The reactions can be performed in a variety of vessels simply by administering the carbon dioxide in the form of dry ice, without the need for costly or elaborate equipment or set-ups.
04:36
Vacuum-Sealed Hot Water Bath Immersion for the Preparation of Anatomical and Surgical Cadaveric Bone Models
0 Views •
Cited by 1 •
2022
The present protocol describes the maceration and cleaning of cadaveric bone with a vacuum-sealed, hot water bath immersion technique. This is a low-cost, safe, and effective method to produce anatomical specimens for surgical planning and medical education as an alternative to three-dimensional (3D) printed models.
FAQs
The seal forms when a gasket or other sealing material is compressed between matching manifold surfaces. Compression closes small gaps around joints, ports, or chamber interfaces, reducing pathways through which fluid or gas could escape. Consistent contact is important because incomplete compression can permit leakage or unwanted exchange, affecting pressure, flow, and the separation of connected biological environments.
Preventing unintended exchange helps preserve the planned movement of fluids or gases through connected channels. This supports stable experimental conditions and reduces the chance that adjacent pathways will influence one another. In biological systems, maintaining separation also helps protect samples from contamination and improves consistency when researchers monitor cell culture, perfusion, filtration, or environmental-control processes.
A properly compressed sealing interface supports more stable pressure and flow by limiting leakage at connections and chamber boundaries. If the interface does not close effectively, fluid or gas can escape or move between unintended regions, changing the conditions experienced by samples. The resulting instability can make flow routes harder to interpret and reduce experimental consistency.
Assembly should bring the gasket or sealing material into even contact with the mating surfaces around the relevant joints, ports, or chamber interfaces. The manifold must remain assembled so compression is maintained across those boundaries. Correct positioning helps preserve the intended pathways, while poor contact can compromise leak prevention and allow unwanted exchange during biological operation.
The transparent acrylic manifold allows researchers to observe samples and follow visible flow routes while the sealing component maintains closed interfaces. This combination is useful when experimental interpretation depends on seeing where material moves through the system. It supports biological setups involving cell culture, perfusion, filtration, or environmental control without sacrificing the need for contained pathways.
This approach is relevant to manifold systems used for cell culture, perfusion, filtration, and environmental control. In each case, the seal helps maintain the intended fluid or gas pathways while supporting controlled experimental conditions. Reliable closure can protect samples from contamination, preserve stable pressure and flow, and make observed behavior easier to relate to the planned system configuration.