fabrication-visualization-capillary-bridges-slit-pore

Fabrication and Visualization of Capillary Bridges in Slit Pore Geometry

A procedure for creating and imaging capillary bridges in slit-pore geometry is presented. High aspect ratio hydrophobic pillars are fabricated and ...

Johns Hopkins University

We investigate the morphological evolution of nonaxisymmetric capillary bridges in slit-pore geometry as the height of the pore and aspect ratio of the bridge are varied. The liquid bridges are formed between two hydrophobic surfaces patterned with hydrophilic strips. The aspect ratio of the capillary bridges (length/width) is varied from 2.5 to 120 by changing the separation between the surfaces, the width of the strips, or the fluid volume. As the bridge height is increased, the aspect ratio decreases and we observe a large increase in the mean curvature of the bridge. More specifically, the following counterintuitive result is observed: the mean curvature of the bridges changes sign and goes from negative (concave bridge) to positive (convex bridge) when the height is increased at constant volume. These experimental observations are in quantitative agreement with Surface Evolver simulations. Scaling shows a collapse of the data indicating that this transition in the sign of the Laplace pressure is universal for capillary bridges with high aspect ratios. Finally, we show that the morphology diagrams obtained from our 3D analysis are considerably different from those expected from a 2D analysis.

From concave to convex: capillary bridges in slit pore geometry.

We consider the shape evolution of non-axisymmetric capillary bridges in slit pore geometry as the pore height is increased at constant volume. Experiments and finite element simulations using Surface Evolver have shown that as the height of the pore is increased the mean curvature of the bridge, and hence Laplace pressure, changes its sign from negative to positive. Here we propose an intuitive explanation of this surprising phenomenon. We suggest that it is the balance between the confinement and the wetting properties of the supporting strips that causes the change in sign of the Laplace pressure. The theory proposed relies on three simple approximations, which are tested individually, and is in good agreement with experiments and simulations in the regime where the curvature transition from negative to positive takes place. Theoretical arguments take into account only the wetting properties and geometry of the system (the width and height of the pore). Along with the formula for the curvature, we derive also a relation for the pinning angle of the capillary bridge, which is also verified experimentally.

Article	Year
From concave to convex: capillary bridges in slit pore geometry. Langmuir : the ACS journal of surfaces and colloids\| PubMed ID: 23061424	2012
Curvature of Capillary Bridges as a Competition between Wetting and Confinement. Langmuir : the ACS journal of surfaces and colloids\| PubMed ID: 24274673	2013

David J. Broesch

Biography

JoVE Journal Publications

Other Publications