bioprinting-cellularized-constructs-using-tissue-specific-hydrogel

Bioprinting Cellularized Constructs Using a Tissue-specific Hydrogel Bioink

Bioprinting has emerged as a versatile biofabrication approach for creating tissue engineered organ constructs. These constructs have potential use as ...

Wake Forest Univeristy Health Sciences

Poly(propylene fumarate) (PPF) is an ultraviolet-curable and biodegradable polymer with potential applications for bone regeneration. In this study, we designed and fabricated three-dimensional (3D) porous scaffolds based on a PPF polymer network using micro-stereolithography (MSTL). The 3D scaffold was well fabricated with a highly interconnected porous structure and porosity of 65%. These results provide a new scaffold fabrication method for tissue engineering. Surface modification is a commonly used and effective method for improving the surface characteristics of biomaterials without altering their bulk properties that avoids the expense and long time associated with the development of new biomaterials. Therefore, we examined surface modification of 3D scaffolds by applying accelerated biomimetic apatite and arginine-glycine-aspartic acid (RGD) peptide coating to promote cell behavior. The apatite coating uniformly covered the scaffold surface after immersion for 24 h in 5-fold simulated body fluid (5SBF) and then the RGD peptide was applied. Finally, the coated 3D scaffolds were seeded with MC3T3-E1 pre-osteoblasts and their biologic properties were evaluated using an MTS assay and histologic staining. We found that 3D PPF/diethyl fumarate (DEF) scaffolds fabricated with MSTL and biomimetic apatite coating can be potentially used in bone tissue engineering.

Development of 3D PPF/DEF scaffolds using micro-stereolithography and surface modification.

Fabrication of three-dimensional (3D) scaffolds with appropriate mechanical properties and desired architecture for promoting cell growth and new tissue formation is one of the most important efforts in tissue engineering field. Scaffolds fabricated from bioactive ceramic materials such as hydroxyapatite and tricalcium phosphate show promise because of their biological ability to support bone tissue regeneration. However, the use of ceramics as scaffold materials is limited because of their inherent brittleness and difficult processability. The aim of this study was to create robust ceramic scaffolds, which have a desired architecture. Such scaffolds were successfully fabricated by projection-based microstereolithography, and dilatometric analysis was conducted to study the sintering behavior of the ceramic materials. The mechanical properties of the scaffolds were improved by infiltrating them with a polycaprolactone solution. The toughness and compressive strength of these ceramic/polymer scaffolds were about twice those of ceramic scaffolds. Furthermore, the osteogenic gene expression on ceramic/polymer scaffolds was better than that on ceramic scaffolds. Through this study, we overcame the limitations of previous research on fabricating ceramic scaffolds and these new robust ceramic scaffolds may provide a much improved 3D substrate for bone tissue regeneration.

A new method of fabricating robust freeform 3D ceramic scaffolds for bone tissue regeneration.

An electromagnetic field is an effective stimulation tool because it promotes bone defect healing, albeit in an unknown way. Although electromagnetic fields are used for treatment after surgery, many patients prefer cell-based tissue regeneration procedures that do not require daily treatments. This study addressed the effects of an electromagnetic field on adipose-derived stem cells (ASCs) to investigate the feasibility of pretreatment to accelerate bone regeneration. After identifying a uniform electromagnetic field inside a solenoid coil, we observed that a 45 Hz electromagnetic field induced osteogenic marker expression via bone morphogenetic protein, transforming growth factor β, and Wnt signalling pathways based on microarray analyses. This electromagnetic field increased osteogenic gene expression, alkaline phosphate activity and nodule formation in vitro within 2 weeks, indicating that this pretreatment may provide osteogenic potential to ASCs on three-dimensional (3D) ceramic scaffolds. This pretreatment effect of an electromagnetic field resulted in significantly better bone regeneration in a mouse calvarial defect model over 4 weeks compared to that in the untreated group. This short-term evaluation showed that the electromagnetic field pretreatment may be a future therapeutic option for bone defect treatment.

Short-term evaluation of electromagnetic field pretreatment of adipose-derived stem cells to improve bone healing.

Pretreatment using various types of biophysical stimuli could provide appropriate potential to cells during construction of the engineered tissue in vitro. We hypothesized that multiple combinations of these biophysical stimuli could enhance osteogenic differentiation in vitro and bone formation in vivo. Cyclic strain, an electromagnetic field, and ultrasound were selected and combined as effective stimuli for osteogenic differentiation using a developed bioreactor. Here we report the experimental evaluation of the osteogenic effects of various combinations of three different biophysical stimuli in vitro and in vivo using human adipose-derived stem cells (ASCs). Osteogenic differentiation of ASCs was accelerated by multiple-combination biophysical stimulation in vitro. However, both single stimulation and double-combination stimulation were sufficient to accelerate bone regeneration in vivo, while the osteogenic marker expression of those groups was not as high as that of triple-combination stimulation in vitro. We inferred from these data that ASCs appropriately differentiated into the osteogenic lineage by biophysical stimulation could be a better option for accelerating bone formation in vivo than relatively undifferentiated or completely differentiated ASCs. Although many questions remain about the mechanisms of combined effects of various biophysical stimuli, this approach could be a more powerful tool for bone tissue regeneration.

Combined effect of three types of biophysical stimuli for bone regeneration.

The regeneration of articular cartilage consisting of hyaline cartilage and hydrogel scaffolds has been generally used in tissue engineering. However, success in in vivo studies has been rarely reported. The hydrogel scaffolds implanted into articular cartilage defects are mechanically unstable and it is difficult for them to integrate with the surrounding native cartilage tissue. Therefore, it is needed to regenerate cartilage and bone tissue simultaneously. We developed hybrid scaffolds with hydrogel scaffolds for cartilage tissue and with ceramic scaffolds for bone tissue. For in vivo study, hybrid scaffolds were press-fitted into osteochondral tissue defects in a rabbit knee joints and the cartilage tissue regeneration in blank, hydrogel scaffolds, and hybrid scaffolds was compared. In 12th week after implantation, the histological and immunohistochemical analyses were conducted to evaluate the cartilage tissue regeneration. In the blank and hydrogel scaffold groups, the defects were filled with fibrous tissues and the implanted hydrogel scaffolds could not maintain their initial position; in the hybrid scaffold group, newly generated cartilage tissues were morphologically similar to native cartilage tissues and were smoothly connected to the surrounding native tissues. This study demonstrates hybrid scaffolds containing hydrogel and ceramic scaffolds can provide mechanical stability to hydrogel scaffolds and enhance cartilage tissue regeneration at the defect site.

Development of hybrid scaffolds using ceramic and hydrogel for articular cartilage tissue regeneration.

Bioprinting technology has emerged as a powerful tool for building tissue and organ structures in the field of tissue engineering. This technology allows precise placement of cells, biomaterials and biomolecules in spatially predefined locations within confined three-dimensional (3D) structures. Various bioprinting technologies have been developed and utilized for applications in life sciences, ranging from studying cellular mechanisms to constructing tissues and organs for implantation, including heart valve, myocardial tissue, trachea and blood vessels. In this article, we introduce the general principles and limitations of the most widely used bioprinting technologies, including jetting- and extrusion-based systems. Application-based research focused on tissue regeneration is presented, as well as the current challenges that hamper clinical utility of bioprinting technology.

Article	Year
Development of 3D PPF/DEF scaffolds using micro-stereolithography and surface modification. Journal of materials science. Materials in medicine\| PubMed ID: 18763023	2009
A new method of fabricating robust freeform 3D ceramic scaffolds for bone tissue regeneration. Biotechnology and bioengineering\| PubMed ID: 23192318	2013
Short-term evaluation of electromagnetic field pretreatment of adipose-derived stem cells to improve bone healing. Journal of tissue engineering and regenerative medicine\| PubMed ID: 23281198	2015
Combined effect of three types of biophysical stimuli for bone regeneration. Tissue engineering. Part A\| PubMed ID: 24446961	2014
Development of hybrid scaffolds using ceramic and hydrogel for articular cartilage tissue regeneration. Journal of biomedical materials research. Part A\| PubMed ID: 25044835	2015
Bioprinting technology and its applications. European journal of cardio-thoracic surgery : official journal of the European Association for Cardio-thoracic Surgery\| PubMed ID: 25061217	2014

Young-Joon Seol

Biography

JoVE Journal Publications

Other Publications