transport-properties-ibuprofen-encapsulated-cyclodextrin-nanosponge

Transport Properties of Ibuprofen Encapsulated in Cyclodextrin Nanosponge Hydrogels: A Proton HR-MAS NMR Spectroscopy Study

The chemical cross-linking of &#946;-cyclodextrin (&#946;-CD) with ethylenediaminetetraacetic dianhydride (EDTA) led to branched polymers referred to as ...

Politecnico di Milano

Università degli studi e-Campus

Cellulose material C1 was prepared by grafting of glycidyl methacrylate (GMA) in the presence of Fenton-type reagent. This one-pot procedure provided C1 with glycidyl isobutyrate branches. Glycidyl epoxide ring opening with water turned C1-C2 material branched with glycerol isobutyrate. So, C1 surface bears hydrophobic branches ending with the glycidyl group, while C2 surface presents hydrophilic branches ending with the glycerol group. The adsorption of aromatic polluting substances like phenol (Ph), 4-nitrophenol (pNPh), 2,4-dinitrophenol (dNPh), 2,4,6-trinitrophenol (picric acid, tNPh) and 2-naphtol (BN) from their water solutions was tested with C1, C2 and with the untreated cellulose material C0. Phenol adsorption did not occur. All the other aromatic molecules were removed in different amount both by C1 and C2. C1 and C2 showed different affinities towards nitrophenols and 2-naphtol. While C1 was much more effective for removing the hydrophobic 2-naphtol, C2 had higher adsorption capacity towards the hydrophilic nitrophenols, in agreement with their branches polarity, respectively.

Surface functionalization of cotton cellulose with glycidyl methacrylate and its application for the adsorption of aromatic pollutants from wastewaters.

Titanium oxide is a heterogeneous catalyst whose efficient photoinduced activity, related to some of its allotropic forms, paved the way for its widespread technological use. Here, we offer a comparative analysis of the use of titanium oxide as coating for materials in biomedical devices. First, we introduce the photoinduced catalytic mechanisms of TiO2 and their action on biological environment and bacteria. Second, we overview the main physical and chemical technologies for structuring suitable TiO2 coatings on biomedical devices. We then present the approaches for in vitro characterization of these surfaces. Finally, we discuss the main aspects of TiO2 photoactivated antimicrobial activity on medical devices and limitations for these types of applications.

Titanium oxide antibacterial surfaces in biomedical devices.

Since the beginning of the century, N-hydroxyphthalimide and related compounds have been revealed to be efficient organocatalysts for free-radical processes and have found ample application in promoting the aerobic oxidation of a wide range of organic substrates. When combined with different co-catalysts, they are activated to the corresponding N-oxyl radical species and become able to promote radical chains, involving molecular oxygen, directly or indirectly. Most of the examples reported in the literature describe the use of these N-hydroxy derivatives in the presence of transition-metal complexes. However, eco-friendly standards, including the demand for highly selective transformations, impose the development of metal-free processes, especially for large-scale productions, as in the case of the oxygenation of hydrocarbons. For this reason, many efforts have been devoted in the past decade to the design of new protocols for the activation of N-hydroxy imides in the presence of nonmetal initiators. Herein we provide a concise overview of the most significant and successful examples in this field, with the final aim to furnish a useful instrument for all scientists actively involved in the O2-mediated selective oxidation of organic compounds and looking for environmentally safe alternatives to metal catalysis.

Metal-free aerobic oxidations mediated by N-hydroxyphthalimide. A concise review.

Using Molecular Mechanics and Molecular Dynamics methods, we investigated at the atomistic level the topography effects both on physisorption on different crystalline planes of TiO2 anatase and on the competitive adsorption when three different crystallographic faces were simultaneously present in an idealized nanosized crystal interacting with a simple heteroaromatic molecule experimentally used in sunlight-induced photosynthetic reaction.

Understanding the topography effects on competitive adsorption on a nanosized anatase crystal: a molecular dynamics study.

The phase transition from gel to liquid suspension in cyclodextrin (CD)-based hydrogels is in depth monitored by using Fourier transform infrared spectroscopy in attenuated total reflectance geometry. Cyclodextrin nanosponges (CDNS) synthesized by polymerization of CD with the cross-linking agent ethylenediaminetetraacetic dianhydride at different cross-linking agent/CD molar ratios have been left to evolve from gel phase into liquid suspension upon gradual increase of the hydration level. Measurements of the changes occurring in the vibrational dynamics of the system during this transition provide direct evidence of the gel-sol progress of the CNDS hydrogel, by accounting for the connectivity pattern of water molecules concurring to the gelation process. The experimental results clearly indicate that the increase of the hydration level is accompanied by the corresponding increase of the population of H2O molecules engaged in high-connectivity hydrogen-bond networks. The water tetrahedral arrangement is thus dominant above a characteristic cross-over hydration level, experimentally determined for all the investigated samples. The observation of this characteristic cross-over point for the CDNS hydrogel and its correlation with other parameters of the system (e.g. the absorption ability of CDNS and elasticity of the polymer matrix) is, once again, modulated by the cross-linking agent/CD molar ratio. The latter seems indeed to play a key role in defining the nano- and microscopic properties of nanosponge hydrogels.

Direct evidence of gel-sol transition in cyclodextrin-based hydrogels as revealed by FTIR-ATR spectroscopy.

4,4'-(4,4'-Isopropylidenediphenoxy)bis(N-hydroxyphthalimide), which is a new lipophilic analogue of N-hydroxyphthalimide, can act as an effective catalyst in the aerobic oxidation of alkylaromatics under reduced amounts of polar cosolvent. The catalyst was selected on the basis of an in-depth study of the influence that substituents on the aromatic ring of N-hydroxyphthalimide exert on determining the NO-H bond dissociation energy (BDE). BDE values for a range of model molecules are calculated by DFT and measured by EPR spectroscopy. The new catalyst can be successfully employed in the aerobic oxidation of cumene, ethylbenzene, and cyclohexylbenzene, affording, in all cases, good conversions and high selectivity for the corresponding hydroperoxide. The effect of solvent, catalyst, and temperature has also been investigated.

Aerobic oxidation of alkylaromatics using a lipophilic N-hydroxyphthalimide: overcoming the industrial limit of catalyst solubility.

A new hyper-branched water-soluble polymer was synthesized by reacting β-cyclodextrin with pyromellitic dianhydride beyond the critical conditions that allow the phenomenon of gelation to occur. The molar ratio between the monomers is a crucial parameter that rules the gelation process. Nevertheless, the concentration of monomers in the solvent phase plays a key role as well. Hyper-branched β-cyclodextrin-based polymers were obtained performing the syntheses with excess of solvent and cross-linking agent, and the conditions for critical dilution were determined experimentally. A hyper-branched polymer with very high water solubility was obtained and fully characterized both as for its chemical structure and for its capability to encapsulate substances. Fluorescein was used as probe molecule to test the complexation properties of the new material.

Synthesis and characterization of a hyper-branched water-soluble β-cyclodextrin polymer.

Ibuprofen sodium salt (IP) was encapsulated in cyclodextrin nanosponges (CDNS) obtained by cross-linking of β-cyclodextrin with ethylenediaminetetraacetic acid dianhydride (EDTAn) in two different preparations: CDNSEDTA 1:4 and 1:8, where the 1:n notation indicates the CD to EDTAn molar ratio. The entrapment of IP was achieved by swelling the two polymers with a 0.27 M solution of IP in D2O, leading to colourless, homogeneous hydrogels loaded with IP. The molecular environment and the transport properties of IP in the hydrogels were studied by high resolution magic angle spinning (HRMAS) NMR spectroscopy. The mean square displacement (MSD) of IP in the gels was obtained by a pulsed field gradient spin echo (PGSE) NMR pulse sequence at different observation times t d. The MSD is proportional to the observation time elevated to a scaling factor α. The α values define the normal Gaussian random motion (α = 1), or the anomalous diffusion (α < 1, subdiffusion, α > 1 superdiffusion). The experimental data here reported point out that IP undergoes subdiffusive regime in CDNSEDTA 1:4, while a slightly superdiffusive behaviour is observed in CDNSEDTA 1:8. The transition between the two dynamic regimes is triggered by the polymer structure. CDNSEDTA 1:4 is characterized by a nanoporous structure able to induce confinement effects on IP, thus causing subdiffusive random motion. CDNSEDTA 1:8 is characterized not only by nanopores, but also by dangling EDTA groups ending with ionized COO(-) groups. The negative potential provided by such groups to the polymer backbone is responsible for the acceleration effects on the IP anion thus leading to the superdiffusive behaviour observed. These results point out that HRMAS NMR spectroscopy is a powerful direct method for the assessment of the transport properties of a drug encapsulated in polymeric scaffolds. The diffusion properties of IP in CDNS can be modulated by suitable polymer synthesis; this finding opens the possibility to design suitable systems for drug delivery with predictable and desired drug release properties.

Anomalous diffusion of Ibuprofen in cyclodextrin nanosponge hydrogels: an HRMAS NMR study.

The molecular mechanism responsible for the thermosensitive behaviour exhibited by pH-responsive cyclodextrin-based hydrogels is explored here with the twofold aim of clarifying some basic aspects of H-bond interactions in hydrogel phases and contributing to a future engineering of cyclodextrin hydrogels for targeted delivery and release of bioactive agents. The degree of H-bond association of water molecules entrapped in the gel network and the extent of intermolecular interactions involving the hydrophobic/hydrophilic moieties of the polymer matrix are probed by UV Raman and IR experiments, in order to address the question of how these different and complementary aspects combine to determine the pH-dependent thermal activation exhibited by these hydrogels. Complementary vibrational spectroscopies are conveniently employed in this study with the aim of safely disentangling the spectral response arising from the two main components of the hydrogel systems, i.e. the polymer matrix and water solvent. The experimental evidence suggests that the dominant effects in the mechanism of solvation of cyclodextrin-based hydrogels are due to the changes occurring, upon increasing of temperature, in the hydrophobicity character of specific chemical moieties of the polymer, as triggered by pH variations. The achievements of this work corroborate the potentiality of the UV Raman scattering technique, in combination with more conventional IR experiments, to provide a "molecular view" of complex macroscopic phenomena exhibited in hydrogel phases.

Toward an understanding of the thermosensitive behaviour of pH-responsive hydrogels based on cyclodextrins.

N-hydroxyphthalimide (NHPI) is an organocatalyst for free-radical processes able to promote the aerobic oxidation of a wide range of organic substrates. In particular, NHPI can catalyze the hydroperoxidation of polyunsaturated fatty acids (PUFA). This property could be of interest for biological applications. This work reports the synthesis of two β-cyclodextrin derivatives (CD5 and CD6) having a different degree of methylation and bearing a NHPI moiety. These compounds, having different solubility in water, have been successfully tested for the hydroperoxidation of methyl linoleate, chosen as the PUFA model molecule.

Functionalization of Cyclodextrins with N-Hydroxyphthalimide Moiety: A New Class of Supramolecular Pro-Oxidant Organocatalysts.

Bioinspired aerogel functionalization by surface modification and coating is in high demand for biomedical and technological applications. In this paper, we report an expedient three-step entry to all-natural surface-functionalized nanostructured aerogels based on (a) TEMPO/NaClO promoted synthesis of cellulose nanofibers (TOCNF); (b) freeze-drying for aerogel preparation; and (c) surface coating with a eumelanin thin film by ammonia-induced solid state polymerization (AISSP) of 5,6-dihydroxyindole (DHI) or 5,6-dihydroxyindole-2-carboxylic acid (DHICA) previously deposited from an organic solution. Scanning electron microscopy showed uniform deposition of the dark eumelanin coating on the template surface without affecting porosity, whereas solid state (13)C NMR and electron paramagnetic resonance (EPR) spectroscopy confirmed the eumelanin-type character of the coatings. DHI melanin coating was found to confer to TOCNF templates a potent antioxidant activity, as tested by the 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) assays as well as strong dye adsorption capacity, as tested on methylene blue. The unprecedented combination of nanostructured cellulose and eumelanin thin films disclosed herein implements an original all-natural multifunctional aerogel biomaterial realized via an innovative coating methodology.

Surface-Functionalization of Nanostructured Cellulose Aerogels by Solid State Eumelanin Coating.

We describe a new aerogel obtained from laccase-oxidized galactomannans of the leguminous plant fenugreek (Trigonella foenum-graecum) and suggest its potential practical use. Laccase/TEMPO oxidation of fenugreek in aqueous solution caused a viscosity increase of over 15-fold. A structured, elastic, stable hydrogel was generated, due to formation of carbonyl groups from primary OH of galactose side units and subsequent establishment of hemiacetalic bonds with available free hydroxyl groups. Upon lyophilization of this hydrogel, a water-insoluble aerogel was obtained (EOLFG), capable of uptaking aqueous or organic solvents over 20 times its own weight. The material was characterized by scanning electron microscopy, FT-IR, elemental analysis and (13)C CP-MAS NMR spectroscopy and its mechanical properties were investigated. To test the EOLFG as a delivery system, the anti-microbial enzyme lysozyme was used as model active principle. Lysozyme was added before or after formation of the aerogel, entrapped or absorbed in the gel, retained and released in active form, as proven by its hydrolytic glycosidase activity on lyophilized Micrococcus lysodeikticus cells wall peptidoglycans. This new biomaterial, composed of a chemo-enzymatically modified plant polysaccharide, might represent a versatile, biocompatible "delivery system" of active principles in food and non-food products.

An aerogel obtained from chemo-enzymatically oxidized fenugreek galactomannans as a versatile delivery system.

In light of the recent development of new soft materials, nanostructured self-assembled systems have attracted attention in a variety of technological fields of high social impact. Cyclodextrin nanosponges (CDNS) represent a new and highly versatile class of cross-linked cyclodextrin (CD)-based nanoporous polymers. Their intriguing properties, including safety, biodegradability, negligible toxicity, marked swelling behavior, superior inclusion capability with respect to native CD, are the bases for potential for applications in drug delivery, tissue engineering and regenerative medicine.

Article	Year
Surface functionalization of cotton cellulose with glycidyl methacrylate and its application for the adsorption of aromatic pollutants from wastewaters. Journal of hazardous materials\| PubMed ID: 19520503	2009
Titanium oxide antibacterial surfaces in biomedical devices. The International journal of artificial organs\| PubMed ID: 22094576	2011
Metal-free aerobic oxidations mediated by N-hydroxyphthalimide. A concise review. Beilstein journal of organic chemistry\| PubMed ID: 23843925	2013
Understanding the topography effects on competitive adsorption on a nanosized anatase crystal: a molecular dynamics study. Chemical communications (Cambridge, England)\| PubMed ID: 23862182	2013
Direct evidence of gel-sol transition in cyclodextrin-based hydrogels as revealed by FTIR-ATR spectroscopy. Soft matter\| PubMed ID: 24652067	2014
Aerobic oxidation of alkylaromatics using a lipophilic N-hydroxyphthalimide: overcoming the industrial limit of catalyst solubility. ChemSusChem\| PubMed ID: 25044330	2014
Synthesis and characterization of a hyper-branched water-soluble β-cyclodextrin polymer. Beilstein journal of organic chemistry\| PubMed ID: 25550720	2014
Anomalous diffusion of Ibuprofen in cyclodextrin nanosponge hydrogels: an HRMAS NMR study. Beilstein journal of organic chemistry\| PubMed ID: 25550735	2014
Toward an understanding of the thermosensitive behaviour of pH-responsive hydrogels based on cyclodextrins. Soft matter\| PubMed ID: 26107102	2015
Functionalization of Cyclodextrins with N-Hydroxyphthalimide Moiety: A New Class of Supramolecular Pro-Oxidant Organocatalysts. Molecules (Basel, Switzerland)\| PubMed ID: 26334267	2015
Surface-Functionalization of Nanostructured Cellulose Aerogels by Solid State Eumelanin Coating. Biomacromolecules\| PubMed ID: 26734842	2016
An aerogel obtained from chemo-enzymatically oxidized fenugreek galactomannans as a versatile delivery system. Carbohydrate polymers\| PubMed ID: 27083827	2016
Tuning structural parameters for the optimization of drug delivery performance of cyclodextrin-based nanosponges. Expert opinion on drug delivery\| PubMed ID: 27449474	2016

Lucio Melone

Biography

JoVE Journal Publications

Other Publications