testing-nanoparticle-release-from-composite-containing-nanomaterial

Testing of Nanoparticle Release from a Composite Containing Nanomaterial Using a Chamber System

With the rapid development of nanotechnology as one of the most important technologies in the 21st century, interest in the safety of consumer products ...

Hanyang University

Single-particle characterization of summertime Arctic aerosols is useful to understand the impact of air pollutants on the polar atmosphere. In the present study, a quantitative single particle analytical technique, low-Z particle electron probe X-ray microanalysis, was used to characterize 8100 individual particles overall in 16 sets of aerosol samples collected at Ny-Alesund, Svalbard, Norway on 25-31 July, 2007. Based on their X-ray spectral and secondary electron image data of individual particles, 13 particle types were identified, in which particles of marine origin were the most abundant, followed by carbonaceous and mineral dust particles. A number of aged (reacted) sea salt (and mixture) particles produced by the atmospheric reaction of genuine sea-salts, especially with NO(x) or HNO(3), were significantly encountered in almost all the aerosol samples. They greatly outnumbered genuine sea salt particles, implying that the summertime Arctic atmosphere, generally regarded as a clean background environment, is disturbed by anthropogenic air pollutants. The main sources of airborne NO(x) (or HNO(3)) are probably ship emissions around the Arctic Ocean, industry emission from northern Europe and northwestern Siberia, and renoxification of NO(3)(-) within or on the melting snow/ice surface.

Single-particle characterization of summertime arctic aerosols collected at Ny-Alesund, Svalbard.

In this work, an analytical method for the characterization of the hygroscopic property, chemical composition, and morphology of individual aerosol particles is introduced. The method, which is based on the combined use of optical and electron microscopic techniques, is simple and easy to apply. An optical microscopic technique was used to perform the visual observation of the phase transformation and hygroscopic growth of aerosol particles on a single particle level. A quantitative energy-dispersive electron probe X-ray microanalysis, named low-Z particle EPMA, was used to perform a quantitative chemical speciation of the same individual particles after the measurement of the hygroscopic property. To validate the analytical methodology, the hygroscopic properties of artificially generated NaCl, KCl, (NH(4))(2)SO(4), and Na(2)SO(4) aerosol particles of micrometer size were investigated. The practical applicability of the analytical method for studying the hygroscopic property, chemical composition, and morphology of ambient aerosol particles is demonstrated.

Combined use of optical and electron microscopic techniques for the measurement of hygroscopic property, chemical composition, and morphology of individual aerosol particles.

Carbon nanotubes (CNT) are known to have widespread industrial applications; however, several reports indicated that these compounds may be associated with adverse effects in humans. In this study, multiwalled carbon nanotubes were administered to murine lungs intratracheally to determine whether acute and chronic pulmonary toxicity occurred. In particular, pristine multiwalled carbon nanotubes (PMWCNT) and acid-treated multiwalled carbon nanotubes (TMWCNT) were used in this study. In broncheoalveolar lavage fluid (BALF) cell analysis, PMWCNT induced more severe acute inflammatory cell recruitment than TMWCNT. Histopathologically, both PMWCNT and TMWCNT induced multifocal inflammatory granulomas in a dose-dependent manner. The observed granulomas were reversible, with TMWCNT-induced granulomas diminishing faster than PMWCNT-induced granulomas. Although the area of granuloma reduced with time, hyperplasia and dysplastic characteristics such as mitotic figures, anisokaryosis, and anisocytosis were still observed. These findings demonstrate that MWCNT induces granulomatous inflammation, and the duration and pattern of inflammation seem to vary depending upon the types of MWCNT to which mice are exposed. Therefore, toxicity studies on various types of CNT are needed as the responsiveness to these compounds differs.

Toxicity and clearance of intratracheally administered multiwalled carbon nanotubes from murine lung.

With the increased production and widespread use of nanomaterials, human and environmental exposure to nanomaterials is inevitably increasing. Therefore, this study monitored the possible exposure to nanoparticles at workplaces that manufacture nano-TiO(2) and nano-silver. To estimate the potential exposure of workers, personal sampling, area monitoring, and real-time monitoring using a scanning mobility particle sizer (SMPS) and dust monitor were conducted at workplaces where the workers handle nanomaterials. The gravimetric concentrations of TiO(2) ranged from 0.10 to 4.99 mg/m(3), which were lower than the occupational exposure limit 10 mg/m(3) set by the Korean Ministry of Labor or American Conference of Governmental Industrial Hygienists (ACGIH). Meanwhile, the silver metal concentrations ranged from 0.00002 to 0.00118 mg/m(3), which were also lower than the silver dust 0.1 mg/m(3) and silver soluble compound 0.01 mg/m(3) occupational exposure limits set by the ACGIH. The particle number concentrations at the nano-TiO(2) manufacturing workplaces ranged from 11,418 to 45,889 particles/cm(3) with a size range of 15-710.5 nm during the reaction, although the concentration decreased to 14,000 particles/cm(3) when the reaction was stopped. The particle concentrations at the TiO(2) manufacturing workplaces increased during the reactor and vacuum pump operations, and during the collection of the synthesized TiO(2) particles. Similarly, the particle concentrations at the silver nanoparticle manufacturing workplaces increased when the sodium citrates were weighed or reacted with the silver nitrates, and during the cleaning of the workplace. The number of silver nanoparticles in the samples obtained from the workplace manufacturing silver nanoparticles using induced coupled plasma ranged from 57,789 to 2,373,309 particles/cm(3) inside the reactor with an average size of 20-30 nm and 535-25,022 particles/cm(3) with a wide range of particle sizes due to agglomeration or aggregation after the release of nanoparticles into the workplace air. In contrast, the silver nanoparticles manufactured by the wet method ranged from 393 to 3526 particle/cm(3) with an average size of 50 nm. Thus, when taken together, the TiO(2) and silver nanoparticle concentrations were relatively lower than existing occupational exposure limits.

Exposure assessment of workplaces manufacturing nanosized TiO2 and silver.

Single-particle characterization of Antarctic aerosols was performed to investigate the impact of marine biogenic sulfur species on the chemical compositions of sea-salt aerosols in the polar atmosphere. Quantitative energy-dispersive electron probe X-ray microanalysis was used to characterize 2900 individual particles in 10 sets of aerosol samples collected between March 12 and 16, 2009 at King Sejong Station, a Korean scientific research station located at King George Island in the Antarctic. Two size modes of particles, i.e., PM(2.5-10) and PM(1.0-2.5), were analyzed, and four types of particles were identified, with sulfur-containing sea-salt particles being the most abundant, followed by genuine sea-salt particles without sulfur species, iron-containing particles, and other species including CaCO(3)/CaMg(CO(3))(2), organic carbon, and aluminosilicates. When a sulfur-containing sea-salt particle showed an atomic concentration ratio of sulfur to sodium of >0.083 (seawater ratio), it is regarded as containing nonsea-salt sulfate (nss-SO(4)(2-)) and/or methanesulfonate (CH(3)SO(3)(-)), which was supported by attenuated total reflection Fourier transform-infrared imaging measurements. These internal mixture particles of sea-salt/CH(3)SO(3)(-)/SO(4)(2-) were very frequently encountered. As nitrate-containing particles were not encountered, and the air-masses for all of the samples originated from the Pacific Ocean (based on 5-day backward trajectories), the oxidation of dimethylsulfide (DMS) emitted from phytoplanktons in the ocean is most likely to be responsible for the formation of the mixed sea-salt/CH(3)SO(3)(-)/SO(4)(2-) particles.

Single-particle characterization of summertime Antarctic aerosols collected at King George Island using quantitative energy-dispersive electron probe X-ray microanalysis and attenuated total reflection Fourier transform-infrared imaging techniques.

Carbon nanotubes (CNTs) have specific physico-chemical properties that are useful for the electronics, automotive, and construction industries. Yet, despite their many advantages, there is a current lack of available information on the human health and environmental hazards of CNTs. For this reason, the current study investigated the inhalation toxicity potential of multiwall CNTs (MWCNTs). Eight-week-old rats were divided into four groups (10 rats in each group), the fresh-air control (0mg/m(3)), low-concentration group (0.16mg/m(3)), middle-concentration group (0.34mg/m(3)), and high-concentration group (0.94mg/m(3)), and the whole body was exposed to MWCNTs for 5 days (6h/day). Lung cells were then isolated from five rats in each group on day 0 and 1 month after the 5-day exposure, respectively. The MWCNTs were generated by a newly designed generation system, and the MWCNT concentrations in the exposure chambers monitored in accordance with National Institute for Occupational Safety and Health (NIOSH) 0500 using a membrane filter. The MWCNTs were also sampled for an elemental carbon concentration analysis using a glass filter. The animals exhibited no significant body weight changes, abnormal clinical signs, or mortality during the experiment. A single-cell gel electrophoresis assay (Comet assay) was conducted to determine the DNA damage in lung cells obtained from the right lung. As a result, the Olive tail moments were 23.00±1.76, 30.39±1.96, 22.96±1.26, and 33.98±2.21 for the control, low-, middle-, and high-concentration groups, respectively, on day 0 postexposure. Meanwhile, 1 month postexposure, the Olive tail moments were 25.00±2.71, 28.39±3.55, 22.56±1.36, and 31.97±3.16 for the control, low-, middle-, and high-concentration groups, respectively. Thus, the MWCNTs caused a statistically significant increase in lung DNA damage at high concentration (0.94mg/m(3)) when compared with the negative control group on day 0 and 1 month postexposure.

Persistent DNA damage measured by comet assay of Sprague Dawley rat lung cells after five days of inhalation exposure and 1 month post-exposure to dispersed multi-wall carbon nanotubes (MWCNTs) generated by new MWCNT aerosol generation system.

In this study, a direct-flow-type nose-only exposure chamber developed for inhalation toxicity experiments using a numerical analysis and experiments is evaluated. Maintaining a uniform flow rate and test article concentration are the critical factors when designing an inhalation exposure chamber. Therefore, this study evaluated whether the flow rate and particle size distribution at the injection nozzles at each port could be maintained with a deviation below 10%. To achieve this requirement, a nose-only exposure chamber flow field was simulated using a numerical analysis method, i.e. computational fluid dynamics (CFD) code FLUENT 6.3.26. Based on the simulation results, a test chamber was built and tested. The flow velocity was measured at the injection nozzle of the chamber and the aerosol particle size distribution was also measured at each port while inserting the test material into the exposure chamber. The results indicated that a uniform flow field distribution at each stage and port, the deviation of the flow velocity, and particle size distribution were all within 10%. Thus, the resulting nose-only exposure chamber could be described as well-designed.

Evaluation of newly developed nose-only inhalation exposure chamber for nanoparticles.

Carbon nanotubes are an important new class of technological materials that have numerous novel and useful properties. Multi-walled carbon nanotubes (MWCNTs), which is a nanomaterial, is now in mass production because of its excellent mechanical and electrical properties. Although MWCNTs appear to have great industrial and medical potential, there is little information regarding their toxicological effects on researchers and workers who could be exposed to them by inhalation during the handling of MWCNTs.

Multi-Walled Carbon Nanotube (MWCNT) Dispersion and Aerosolization with Hot Water Atomization without Addition of Any Surfactant.

The effect of continuous humidifier use on the bioaerosol concentration in an indoor environment was investigated. An ultrasonic humidifier was operated for 10 hr per day for 15 days in an apartment room. During this time period, viable bioaerosol samples were taken using a single-stage Andersen sampler containing culture media plates for bacteria and fungi. The culture plates were then incubated at room temperature for 2~7 days depending on the media. The counts for the air sample plates were corrected for multiple impactions using the positive hole conversion method and are reported as the colony forming units per cubic meter of air (CFU/m(3)). While the bacterial concentration measured using the tryptic soy agar (TSA) did not show any significant change during the first 3 days, the concentration increased from the 6(th) day (6979 CFU/m(3)) and reached a maximum on the 9(th) day (46431 CFU/m(3)). The concentration then decreased to 2470 CFU/m(3) on the 12(th) day, at which point the fungal concentration increased rapidly to 14424~16038 CFU/m(3). Also, while the fungal concentration showed a significant change until the 9(th) day of humidifier use, fungal growth was observed on the wallpaper and increased rapidly from the 12(th) day. However, the bacterial concentration increased rapidly after the fungi were removed by remediation. The major fungal species identified in the samples were Penicillium representing 34%, Aspergillus representing 31%, Cladosporium representing 24%, and Alternaria representing 1%. The results also indicated that a relative humidity over 80% was easily achieved with continuous humidifier use. Yet, maintaining a high humidity in a room can cause a rapid outbreak of microbial growth.

Outbreak of bioaerosols with continuous use of humidifier in apartment room.

Despite their useful physico-chemical properties, carbon nanotubes (CNTs) continue to cause concern over occupational and human health due to their structural similarity to asbestos. Thus, to evaluate the toxic and genotoxic effect of multi-wall carbon nanotubes (MWCNTs) on lung cells in vivo, eight-week-old rats were divided into four groups (each group = 25 animals), a fresh air control (0 mg/m(3)), low (0.17 mg/m(3)), middle (0.49 mg/m(3)), and high (0.96 mg/m(3)) dose group, and exposed to MWCNTs via nose-only inhalation 6 h per day, 5 days per week for 28 days. The count median length and geometric standard deviation for the MWCNTs determined by TEM were 330.18 and 1.72 nm, respectively, and the MWCNT diameters ranged from 10 to 15 nm. Lung cells were isolated from five male and five female rats in each group on day 0, day 28 (only from males) and day 90 following the 28-day exposure. The total number of animals used was 15 male and 10 female rats for each concentration group. To determine the genotoxicity of the MWCNTs, a single cell gel electrophoresis assay (Comet assay) was conducted on the rat lung cells. As a result of the exposure, the olive tail moments were found to be significantly higher (p < 0.05) in the male and female rats from all the exposed groups when compared with the fresh air control. In addition, the high-dose exposed male and middle and high-dose exposed female rats retained DNA damage, even 90 days post-exposure (p < 0.05). To investigate the mode of genotoxicity, the intracellular reactive oxygen species (ROS) levels and inflammatory cytokine levels (TNF-α, TGF- β, IL-1, IL-2, IL-4, IL-5, IL-10, IL-12 and IFN-γ) were also measured. For the male rats, the H2O2 levels were significantly higher in the middle (0 days post-exposure) and high- (0 days and 28 days post-exposure) dose groups (p < 0.05). Conversely, the female rats showed no changes in the H2O2 levels. The inflammatory cytokine levels in the bronchoalveolar lavage (BAL) fluid did not show any statistically significant difference. Interestingly, the short-length MWCNTs deposited in the lung cells were persistent at 90 days post-exposure. Thus, exposing lung cells to MWCNTs with a short tube length may induce genotoxicity.

In vivo genotoxicity evaluation of lung cells from Fischer 344 rats following 28 days of inhalation exposure to MWCNTs, plus 28 days and 90 days post-exposure.

Continuous monitoring for possible exposure to carbon nanotubes was conducted over a period of 2 to 3 days at workplaces that manufacture multiwall carbon nanotubes (MWCNTs) and single wall carbon nanotubes (SWCNTs). To estimate the potential emission of carbon nanotubes (CNTs) and potential exposure of workers, personal sampling, area monitoring, and real-time monitoring using an scanning mobility particle sizer (SMPS) and dust monitor were conducted at workplaces where the workers manufactured CNTs. The personal and area sampling of the total suspended particulate (TSP) at the MWCNT manufacturing facilities ranged from 0.031 to 0.254 and from N.D (not detected) to 0.253 mg/m(3), respectively. This 2- to 3-day monitoring study found that nanoparticles were released when opening the chemical vapor deposit (CVD) reactor door after the synthesis of MWCNTs, when transferring the MWCNTs to containers and during blending and grinding. However, distinguishing the background concentration from the work process particle emission was complicated due to sustained and even increased particle concentrations after the work processes were terminated. The MWCNTs sampled for transmission electron microscopy (TEM) observation exhibited a tangled shape with no individual dispersed CNT structures.

Article	Year
Single-particle characterization of summertime arctic aerosols collected at Ny-Alesund, Svalbard. Environmental science & technology\| PubMed ID: 20199069	2010
Combined use of optical and electron microscopic techniques for the measurement of hygroscopic property, chemical composition, and morphology of individual aerosol particles. Analytical chemistry\| PubMed ID: 20698495	2010
Toxicity and clearance of intratracheally administered multiwalled carbon nanotubes from murine lung. Journal of toxicology and environmental health. Part A\| PubMed ID: 20954079	2010
Exposure assessment of workplaces manufacturing nanosized TiO2 and silver. Inhalation toxicology\| PubMed ID: 21456955	2011
Single-particle characterization of summertime Antarctic aerosols collected at King George Island using quantitative energy-dispersive electron probe X-ray microanalysis and attenuated total... Environmental science & technology\| PubMed ID: 21675791	2011
Persistent DNA damage measured by comet assay of Sprague Dawley rat lung cells after five days of inhalation exposure and 1 month post-exposure to dispersed multi-wall carbon nanotubes (MWCN... Toxicological sciences : an official journal of the Society of Toxicology\| PubMed ID: 22543278	2012
Evaluation of newly developed nose-only inhalation exposure chamber for nanoparticles. Inhalation toxicology\| PubMed ID: 22809169	2012
Multi-Walled Carbon Nanotube (MWCNT) Dispersion and Aerosolization with Hot Water Atomization without Addition of Any Surfactant. Safety and health at work\| PubMed ID: 22953189	2011
Outbreak of bioaerosols with continuous use of humidifier in apartment room. Toxicological research\| PubMed ID: 24278596	2012
In vivo genotoxicity evaluation of lung cells from Fischer 344 rats following 28 days of inhalation exposure to MWCNTs, plus 28 days and 90 days post-exposure. Inhalation toxicology\| PubMed ID: 24568578	2014
Three-Day Continuous Exposure Monitoring of CNT Manufacturing Workplaces. BioMed research international\| PubMed ID: 26125022	2015

Kang-Ho Ahn

Biography

JoVE Journal Publications

Other Publications