antibody-labeling-with-fluorescent-dyes-using-magnetic-protein

Antibody Labeling with Fluorescent Dyes Using Magnetic Protein A and Protein G Beads

Antibodies labeled with small molecules like fluorescent dyes, cytotoxic drugs, and radioactive tracers are essential tools in biomedical research, ...

Promega Corporation

This paper presents a new label-free optical method to study biomolecular interactions in real time at the surface of an optically transparent substrate. The method relies on the change in the absorbance spectrum of a self-assembled monolayer of colloidal gold on glass, as a function of biomolecular binding to the surface of the immobilized colloids. Using this approach, we demonstrate proof of principle of a label-free optical biosensor to quantify biomolecular interactions in real time on a surface in a commercially available UV-visible spectrophotometer and of a colorimetric end-point assay using an optical scanner. The spectrophotometric sensor shows concentration-dependent binding and a detection limit of 16 nM for streptavidin. The sensor is easy to fabricate, is reproducible in its performance, has minimal technological requirements, namely, the availability of an UV-visible spectrophotometer or an optical scanner, and will enable high-throughput screening of biomolecular interactions in real time in an array-based format.

A colorimetric gold nanoparticle sensor to interrogate biomolecular interactions in real time on a surface.

We report a new method to reversibly bind proteins to a surface in a functionally active orientation directly from cell lysate by exploiting a thermodynamically reversible hydrophilic-hydrophobic lower critical solution temperature (LCST) transition exhibited by a recombinant, stimuli-responsive elastin-like polypeptide (ELP). An ELP is covalently micropatterned on a glass surface against an inert BSA background. The ELP-patterned surface is incubated with the soluble fraction of E. coli lysate containing an expressed ELP fusion protein, which is appended with the same ELP as on the surface. The LCST transition of the grafted ELP and the ELP fusion protein is simultaneously triggered by an external stimulus. The LCST transition results in capture of the ELP fusion protein from solution onto the immobilized ELP by hydrophobic interactions between the grafted ELP and the ELP fusion protein. The captured ELP fusion protein is oriented such that the fusion partner is accessible to binding of its target from solution. We also demonstrate that TRAP is reversible; the bound protein-ligand complex is released from the surface by reversing the LCST transition. The triggered control of interfacial properties provided by an immobilized stimuli-responsive polypeptide at the solid-water interface is an enabling technology that allows reversible and functional presentation of ELP fusion proteins on a surface directly from cell lysate without the necessity of intermediate purification steps and subsequent recovery of the protein-ligand complex for downstream analysis by other analytical techniques. TRAP has application in lab-on-a-chip bioanalytical devices as well as in the fabrication of peptide and protein arrays.

Fabrication of a reversible protein array directly from cell lysate using a stimuli-responsive polypeptide.

This article describes the fabrication and characterization of stimulus-responsive elastin-like polypeptide (ELP) nanostructures grafted onto omega-substituted thiolates that were patterned onto gold surfaces by dip-pen nanolithography (DPN). In response to external stimuli such as changes in temperature or ionic strength, ELPs undergo a switchable and reversible, hydrophilic-hydrophobic phase transition at a lower critical solution temperature (LCST). We exploited this phase transition behavior to reversibly immobilize a thioredoxin-ELP (Trx-ELP) fusion protein onto the ELP nanopattern above the LCST. Subsequent binding of an anti-thioredoxin monoclonal antibody (anti-Trx) to the surface-captured thioredoxin showed the presentation of the immobilized protein in a sterically accessible orientation in the nanoarray. We also showed that the resulting Trx-ELP/anti-Trx complex formed above the LCST could be reversibly dissociated below the LCST. These results demonstrate the intriguing potential of ELP nanostructures as generic, reversible, biomolecular switches for on-chip capture and release of a small number (order 100-200) of protein molecules in integrated, nanoscale bioanalytical devices. We also investigated the molecular mechanism underlying this switch by measuring the height changes that accompany the binding and desorption steps and by adhesion force spectroscopy using atomic force microscopy.

Capture and release of proteins on the nanoscale by stimuli-responsive elastin-like polypeptide "switches".

The unique optical properties of noble metal nanoparticles have been used to design a label-free biosensor in a chip format. In this paper, we demonstrate that the size of gold nanoparticles significantly affects the sensitivity of the biosensor. Gold nanoparticles with diameters in the range of 12-48 nm were synthesized in solution and sensor chips were fabricated by chemisorption of these nanoparticles on amine-functionalized glass. Sensors fabricated from 39-nm-diameter gold nanoparticles exhibited maximum sensitivity to the change of the bulk refractive index and the largest "analytical volume", defined as the region around the nanoparticle within which a change in refractive index causes a change in the optical properties of the immobilized nanoparticles. The detection limit for streptavidin-biotin binding of a sensor fabricated from 39-nm-diameter nanoparticles was 20-fold better than a previously reported sensor fabricated from 13-nm-diameter gold nanoparticles. We also discuss several other factors that could improve the performance of the next generation of these immobilized metal nanoparticle sensors.

Label-free biosensing by surface plasmon resonance of nanoparticles on glass: optimization of nanoparticle size.

In this review article, we discuss a class of biosensors that exploit the change in the colorimetric properties of noble metal nanoparticles in response to biomolecular binding at their surface. Several sensor fabrication techniques as well as sensor configurations are discussed with an emphasis on their strengths and limitations. We conclude by presenting the future prospects and challenges for the successful transition of this technology from the laboratory to a commercial product.

Label free colorimetric biosensing using nanoparticles.

For protein microarrays, maintaining protein stability during the slide processing steps of washing, drying, and storage is of major concern. Although several studies have focused on the stability of immobilized antibodies in antibody microarrays, studies on protein-protein interaction arrays and enzyme arrays are lacking. In this paper we used five bait-prey protein interaction pairs and three enzymes to optimize the washing, drying, and storage conditions for protein arrays. The protein arrays for the study were fabricated by combining HaloTag technology and cell-free protein expression. The HaloTag technology, in combination with cell-free expression, allowed rapid expression and immobilization of fusion proteins on hydrogel-coated glass slides directly from cell extracts without any prior purification. Experimental results indicate enzyme captured on glass slides undergoes significant loss of activity when washed and spin-dried using only phosphate buffer, as is typically done with antibody arrays. The impact of washing and spin-drying in phosphate buffer on protein-protein interaction arrays was minimal. However, addition of 5% glycerol to the wash buffer helps retain enzyme activity during washing and drying. We observed significant loss of enzyme activity when slides were stored dry at 4 degrees C, however immobilized enzymes remained active for 30 days when stored at -20 degrees C in 50% glycerol. We also found that cell-free extract containing HaloTag-fused enzymes could undergo multiple freeze/thaw cycles without any adverse impact on enzyme activity. The findings indicate that for large ongoing studies, proteins of interest expressed in cell-free extract can be stored at -70 degrees C and repeatedly used to print small batches of protein array slides to be used over a few weeks.

Improving protein array performance: focus on washing and storage conditions.

Protein arrays hold great promise for proteome-scale analysis of protein-protein interaction networks, but the technical challenges have hindered their adoption by proteomics researchers. The crucial issue of design and fabrication of protein arrays have been addressed in several studies, but the detection strategies used for identifying protein-protein interactions have received little attention. In this study, we evaluated six different detection strategies to identify four different protein-protein interaction pairs. We discuss each detection approach in terms of signal-to-background (S/B) ratio, ease of use, and adaptability to high-throughput format. Protein arrays for this study were made by expressing both the bait proteins (proteins captured at the surface) and prey proteins (probes) in cell-free rabbit reticulocyte lysate (RRL) systems. Bait proteins were expressed as HaloTag fusions that allow covalent capture on a HaloTag ligand-coated glass without any prior protein purification step. Prey proteins were expressed and modified with either tags (protein or peptides) or labels (fluorescent or radiometric) for detection. This simple method for creating protein arrays in combination with our analyses of several detection strategies should increase the usefulness of protein array technologies.

Protein-protein interaction studies on protein arrays: effect of detection strategies on signal-to-background ratios.

A number of histone-binding domains are implicated in cancer through improper binding of chromatin. In a clinically reported case of acute myeloid leukemia (AML), a genetic fusion protein between nucleoporin 98 and the third plant homeodomain (PHD) finger of JARID1A drives an oncogenic transcriptional program that is dependent on histone binding by the PHD finger. By exploiting the requirement for chromatin binding in oncogenesis, therapeutics targeting histone readers may represent a new paradigm in drug development. In this study, we developed a novel small molecule screening strategy that utilizes HaloTag technology to identify several small molecules that disrupt binding of the JARID1A PHD finger to histone peptides. Small molecule inhibitors were validated biochemically through affinity pull downs, fluorescence polarization, and histone reader specificity studies. One compound was modified through medicinal chemistry to improve its potency while retaining histone reader selectivity. Molecular modeling and site-directed mutagenesis of JARID1A PHD3 provided insights into the biochemical basis of competitive inhibition.

Identification and characterization of small molecule inhibitors of a plant homeodomain finger.

Antibodies labeled with small molecules such as fluorophore, biotin or drugs play an important role in various areas of biological research, drug discovery and diagnostics. However, the majority of current methods for labeling antibodies is solution-based and has several limitations including the need for purified antibodies at high concentrations and multiple buffer exchange steps. In this study, a method (on-bead conjugation) is described that addresses these limitations by combining antibody purification and conjugation in a single workflow. This method uses high capacity-magnetic Protein A or Protein G beads to capture antibodies directly from cell media followed by conjugation with small molecules and elution of conjugated antibodies from the beads. High-capacity magnetic antibody capture beads are key to this method and were developed by combining porous and hydrophilic cellulose beads with oriented immobilization of Protein A and Protein G using HaloTag technology. With a variety of fluorophores it is shown that the on-bead conjugation method is compatible with both thiol- and amine-based chemistry. This method enables simple and rapid processing of multiple samples in parallel with high-efficiency antibody recovery. It is further shown that recovered antibodies are functional and compatible with downstream applications.

On-bead antibody-small molecule conjugation using high-capacity magnetic beads.

Receptor-mediated antibody internalization is a key mechanism underlying several anti-cancer antibody therapeutics. Delivering highly toxic drugs to cancer cells, as in the case of antibody drug conjugates (ADCs), efficient removal of surface receptors from cancer cells and changing the pharmacokinetics profile of the antibody drugs are some of key ways that internalization impacts the therapeutic efficacy of the antibodies. Over the years, several techniques have been used to study antibody internalization including radiolabels, fluorescent microscopy, flow cytometry and cellular toxicity assays. While these methods allow analysis of internalization, they have limitations including a multistep process and limited throughput and are generally endpoint assays. Here, we present a new homogeneous method that enables time and concentration dependent measurements of antibody internalization. The method uses a new hydrophilic and bright pH sensor dye (pHAb dye), which is not fluorescent at neutral pH but becomes highly fluorescent at acidic pH. For receptor mediated antibody internalization studies, antibodies against receptors are conjugated with the pHAb dye and incubated with the cells expressing the receptors. Upon binding to the receptor, the dyes conjugated to the antibody are not fluorescent because of the neutral pH of the media, but upon internalization and trafficking into endosomal and lysosomal vesicles the pH drops and dyes become fluorescent. The enabling attributes of the pHAb dyes are the hydrophilic nature to minimize antibody aggregation and bright fluorescence at acidic pH which allows development of simple plate based assays using a fluorescent reader. Using two different therapeutic antibodies--Trastuzumab (anti-HER2) and Cetuximab (anti-EGFR)--we show labeling with pHAb dye using amine and thiol chemistries and impact of chemistry and dye to antibody ration on internalization. We finally present two new approaches using the pHAb dye, which will be beneficial for screening a large number of antibody samples during early monoclonal development phase.

Article	Year
A colorimetric gold nanoparticle sensor to interrogate biomolecular interactions in real time on a surface. Analytical chemistry\| PubMed ID: 11838667	2002
Fabrication of a reversible protein array directly from cell lysate using a stimuli-responsive polypeptide. Analytical chemistry\| PubMed ID: 12622356	2003
Capture and release of proteins on the nanoscale by stimuli-responsive elastin-like polypeptide "switches". Journal of the American Chemical Society\| PubMed ID: 15186170	2004
Label-free biosensing by surface plasmon resonance of nanoparticles on glass: optimization of nanoparticle size. Analytical chemistry\| PubMed ID: 15362894	2004
Label free colorimetric biosensing using nanoparticles. Journal of fluorescence\| PubMed ID: 15617380	2004
Improving protein array performance: focus on washing and storage conditions. Journal of proteome research\| PubMed ID: 18774839	2008
Protein-protein interaction studies on protein arrays: effect of detection strategies on signal-to-background ratios. Analytical biochemistry\| PubMed ID: 19464993	2009
Identification and characterization of small molecule inhibitors of a plant homeodomain finger. Biochemistry\| PubMed ID: 22994852	2012
On-bead antibody-small molecule conjugation using high-capacity magnetic beads. Journal of immunological methods\| PubMed ID: 26316179	2015
Homogeneous plate based antibody internalization assay using pH sensor fluorescent dye. Journal of immunological methods\| PubMed ID: 26851520	2016

Nidhi Nath

Biography

JoVE Journal Publications

Other Publications