scanning-squid-study-of-vortex-manipulation-by-local-contact

Scanning SQUID Study of Vortex Manipulation by Local Contact

Local, deterministic manipulation of individual vortices in type 2 superconductors is challenging. The ability to control the position of individual ...

Bar Ilan University

Bar-Ilan University

In LaAlO(3)/SrTiO(3) heterointerfaces, charge carriers migrate from the LaAlO(3) to the interface in an electronic reconstruction. Magnetism has been observed in LaAlO(3)/SrTiO(3), but its relationship to the interface conductivity is unknown. Here we show that reconstruction is necessary, but not sufficient, for the formation of magnetism. Using scanning superconducting quantum interference device microscopy we find that magnetism appears only above a critical LaAlO(3) thickness, similar to the conductivity. We observe no change in ferromagnetism with gate voltage, and detect ferromagnetism in a non-conducting p-type sample. These observations indicate that the carriers at the interface do not need to be itinerant to generate magnetism. The ferromagnetism appears in isolated patches whose density varies greatly between samples. This inhomogeneity strongly suggests that disorder or local strain generates magnetism in a population of the interface carriers.

Critical thickness for ferromagnetism in LaAlO₃/SrTiO₃ heterostructures.

Manipulation of magnetism is a longstanding goal of research in exotic materials. In this work, we demonstrate that the small ferromagnetic patches in LaAlO(3)/SrTiO(3) heterostructures can be dramatically changed by in situ contact of a scanning probe. Our results provide a platform for manipulation of small magnets through either a strong magneto-elastic coupling or sensitivity to surface modification. The ability to locally control magnetism is particularly interesting due to the presence of superconductivity with strong spin-orbit coupling in LaAlO(3)/SrTiO(3).

Scanning probe manipulation of magnetism at the LaAlO3/SrTiO3 heterointerface.

The quantum spin Hall (QSH) state is a state of matter characterized by a non-trivial topology of its band structure, and associated conducting edge channels. The QSH state was predicted and experimentally demonstrated to be realized in HgTe quantum wells. The existence of the edge channels has been inferred from local and non-local transport measurements in sufficiently small devices. Here we directly confirm the existence of the edge channels by imaging the magnetic fields produced by current flowing in large Hall bars made from HgTe quantum wells. These images distinguish between current that passes through each edge and the bulk. On tuning the bulk conductivity by gating or raising the temperature, we observe a regime in which the edge channels clearly coexist with the conducting bulk, providing input to the question of how ballistic transport may be limited in the edge channels. Our results represent a versatile method for characterization of new QSH materials systems.

Imaging currents in HgTe quantum wells in the quantum spin Hall regime.

The ability to control materials properties through interface engineering is demonstrated by the appearance of conductivity at the interface of certain insulators, most famously the {001} interface of the band insulators LaAlO3 and TiO2-terminated SrTiO3 (STO; refs 1, 2). Transport and other measurements in this system show a plethora of diverse physical phenomena. To better understand the interface conductivity, we used scanning superconducting quantum interference device microscopy to image the magnetic field locally generated by current in an interface. At low temperature, we found that the current flowed in conductive narrow paths oriented along the crystallographic axes, embedded in a less conductive background. The configuration of these paths changed on thermal cycling above the STO cubic-to-tetragonal structural transition temperature, implying that the local conductivity is strongly modified by the STO tetragonal domain structure. The interplay between substrate domains and the interface provides an additional mechanism for understanding and controlling the behaviour of heterostructures.

Locally enhanced conductivity due to the tetragonal domain structure in LaAlO3/SrTiO3 heterointerfaces.

NMR experiments are ideally carried out in well-controlled magnetic fields. When samples of natural porous materials are studied, the situation can be complicated if the sample itself contains magnetic components, giving rise to internal magnetic fields in the pore space that modulate the externally applied fields. If not properly accounted for, the internal fields can lead to misinterpretation of relaxation, diffusion, or imaging data. To predict the potential effect of internal fields, and develop effective mitigation strategies, it is important to develop a quantitative understanding of the magnitude and distribution of internal fields occurring in natural porous media. To develop such understanding, we employ scanning SQUID microscopy, a technique that can detect magnetic field variations very accurately at high spatial resolution (∼3μm). We prepared samples from natural unconsolidated aquifer material, and scanned areas of about 200×200μm in a very low background magnetic field of ∼2μT. We found large amplitude variations with a magnitude of about 2mT, across a relatively long spatial scale of about 200μm, that are associated with a large magnetic grain (>50μm radius) with a strong magnetic remanence. We also detected substantial variations exceeding 60μT on small spatial scales of about ∼10μm. We attribute these small-scale variations to very fine-grained magnetic material. Because we made our measurements at very low background field, the observed variations are not induced by the background field but due to magnetic remanence. Consequently, the observed internal fields will affect even low-field NMR experiments.

Direct measurement of internal magnetic fields in natural sands using scanning SQUID microscopy.

Carbon nanotubes are promising building blocks for various nanoelectronic components. A highly desirable geometry for such applications is a coil. However, coiled nanotube structures reported so far were inherently defective or had no free ends accessible for contacting. Here we demonstrate the spontaneous self-coiling of single-wall carbon nanotubes into defect-free coils of up to more than 70 turns with identical diameter and chirality, and free ends. We characterize the structure, formation mechanism, and electrical properties of these coils by different microscopies, molecular dynamics simulations, Raman spectroscopy, and electrical and magnetic measurements. The coils are highly conductive, as expected for defect-free carbon nanotubes, but adjacent nanotube segments in the coil are more highly coupled than in regular bundles of single-wall carbon nanotubes, owing to their perfect crystal momentum matching, which enables tunneling between the turns. Although this behavior does not yet enable the performance of these nanotube coils as inductive devices, it does point a clear path for their realization. Hence, this study represents a major step toward the production of many different nanotube coil devices, including inductors, electromagnets, transformers, and dynamos.

Defect-Free Carbon Nanotube Coils.

Manipulating individual vortices in a deterministic way is challenging; ideally, manipulation should be effective, local, and tunable in strength and location. Here, we show that vortices respond to local mechanical stress applied in the vicinity of the vortex. We utilized this interaction to move individual vortices in thin superconducting films via local mechanical contact without magnetic field or current. We used a scanning superconducting quantum interference device to image vortices and to apply local vertical stress with the tip of our sensor. Vortices were attracted to the contact point, relocated, and were stable at their new location. We show that vortices move only after contact and that more effective manipulation is achieved with stronger force and longer contact time. Mechanical manipulation of vortices provides a local view of the interaction between strain and nanomagnetic objects as well as controllable, effective, and reproducible manipulation technique.

Mechanical Control of Individual Superconducting Vortices.

Oxide interfaces, including the LaAlO3/SrTiO3 interface, have been a subject of intense interest for over a decade due to their rich physics and potential as low-dimensional nanoelectronic systems. The field has reached the stage where efforts are invested in developing devices. It is critical now to understand the functionalities and limitations of such devices. Recent scanning probe measurements of the LaAlO3/SrTiO3 interface have revealed locally enhanced current flow and accumulation of charge along channels related to SrTiO3 structural domains. These observations raised a key question regarding the role these modulations play in the macroscopic properties of devices. Here we show that the microscopic picture, mapped by scanning superconducting quantum interference device, accounts for a substantial part of the macroscopically measured transport anisotropy. We compared local flux data with transport values, measured simultaneously, over various SrTiO3 domain configurations. We show a clear relation between maps of local current density over specific domain configurations and the measured anisotropy for the same device. The domains divert the direction of current flow, resulting in a direction-dependent resistance. We also show that the modulation can be significant and that in some cases up to 95% of the current is modulated over the channels. The orientation and distribution of the SrTiO3 structural domains change between different cooldowns of the same device or when electric fields are applied, affecting the device behavior. Our results, highlight the importance of substrate physics, and in particular, the role of structural domains, in controlling electronic properties of LaAlO3/SrTiO3 devices. Furthermore, these results point to new research directions, exploiting the STO domains' ability to divert or even carry current.

Article	Year
Critical thickness for ferromagnetism in LaAlO₃/SrTiO₃ heterostructures. Nature communications\| PubMed ID: 22735450	2012
Scanning probe manipulation of magnetism at the LaAlO3/SrTiO3 heterointerface. Nano letters\| PubMed ID: 22769056	2012
Imaging currents in HgTe quantum wells in the quantum spin Hall regime. Nature materials\| PubMed ID: 23770727	2013
Locally enhanced conductivity due to the tetragonal domain structure in LaAlO3/SrTiO3 heterointerfaces. Nature materials\| PubMed ID: 24013791	2013
Direct measurement of internal magnetic fields in natural sands using scanning SQUID microscopy. Journal of magnetic resonance (San Diego, Calif. : 1997)\| PubMed ID: 24589519	2014
Defect-Free Carbon Nanotube Coils. Nano letters\| PubMed ID: 26708150	2016
Mechanical Control of Individual Superconducting Vortices. Nano letters\| PubMed ID: 26836018	2016
Anisotropic Transport at the LaAlO3/SrTiO3 Interface Explained by Microscopic Imaging of Channel-Flow over SrTiO3 Domains. ACS applied materials & interfaces\| PubMed ID: 27111600	2016

Beena Kalisky

Biography

JoVE Journal Publications

Other Publications