a-100-kw-class-applied-field-magnetoplasmadynamic-thruster

A 100 KW Class Applied-field Magnetoplasmadynamic Thruster

Applied-field magnetoplasmadynamic thrusters (AF-MPD thrusters) are hybrid accelerators in which electromagnetic and gas dynamic processes accelerate ...

Beihang University

Published electron temperature profiles of the beam plasma from ion thrusters reveal many divergences both in magnitude and radial variation. In order to know exactly the radial distributions of electron temperature and understand the beam plasma characteristics, we applied five different experimental approaches to measure the spatial profiles of electron temperature and compared the agreement and disagreement of the electron temperature profiles obtained from these techniques. Experimental results show that the triple Langmuir probe and adiabatic poly-tropic law methods could provide more accurate space-resolved electron temperature of the beam plasma than other techniques. Radial electron temperature profiles indicate that the electrons in the beam plasma are non-isothermal, which is supported by a radial decrease (∼2 eV) of electron temperature as the plume plasma expands outward. Therefore, the adiabatic "poly-tropic law" is more appropriate than the isothermal "barometric law" to be used in electron temperature calculations. Moreover, the calculation results show that the electron temperature profiles derived from the "poly-tropic law" are in better agreement with the experimental data when the specific heat ratio (γ) lies in the range of 1.2-1.4 instead of 5/3. 

Electron temperature measurement in Maxwellian non-isothermal beam plasma of an ion thruster.

The ion thruster beam plasma is characterized by high directed ion velocity (10 m/s) and low plasma density (10 m). Interpretation of measurements of such a plasma based on classical Langmuir probe theory can yield a large experimental error. This paper presents an indirect method to calibrate ion density determination in an ion thruster beam plasma using a Faraday probe, a retarding potential analyzer, and a Langmuir probe. This new method is applied to determine the plasma emitted from a 20-cm-diameter Kaufman ion thruster. The results show that the ion density calibrated by the new method can be as much as 40% less than that without any ion current density and ion velocity calibration.

Calibrating ion density profile measurements in ion thruster beam plasma.

We present a new Retarding Potential Analyzer (RPA) design that is capable of measuring keV-level energy, high-density plasma beams. This instrument overcomes the limitations of existing RPAs and can operate in plasmas with densities in excess of 1 × 10 m and ion energies up to 1200 eV. The RPA design parameters were determined by analyzing the electron density and temperature, the sheath thickness, and the ion density in the beam based on the Faraday probe and Langmuir probe measurements. A previously unobserved grid spacing arcing phenomenon was observed in experiments. This arcing phenomenon was also investigated and a grid spacing criterion was proposed to eliminate the arcing. We present measurement results on the plasma beam emitted from the 20 cm Xenon ion thruster used on the Chinese SJ-9A satellite.

Article	Year
Electron temperature measurement in Maxwellian non-isothermal beam plasma of an ion thruster. The Review of scientific instruments\| PubMed ID: 25725841	2015
Calibrating ion density profile measurements in ion thruster beam plasma. The Review of scientific instruments\| PubMed ID: 27910433	2016
A retarding potential analyzer design for keV-level ion thruster beams. The Review of scientific instruments\| PubMed ID: 28040974	2016

Haibin Tang

Biography

JoVE Journal Publications

Other Publications