hybrid-printing-for-the-fabrication-of-smart-sensors

Hybrid Printing for the Fabrication of Smart Sensors

A method to combine additively manufactured substrates or foils and multilayer inkjet printing for the fabrication of sensor devices is presented. First, ...

Alpen-Adria-Universität Klagenfurt

An inkjet- and 3D-printed capacitive sensor system with an all-digital and flexible sensor read-out hardware is reported. It enables spectrometer devices with significantly reduced device outlines and costs. The sensor is developed as multilayer inkjet-printed electrode structure on a 3D-printed copper housing. Very high required position resolutions of r e s p o s < 50 nm and a wide measurement range of r m = 1000 μ m at an offset of d 0 = 1000 μ m in the considered spectrometers motivate this work. The read-out hardware provides high sampling rates of up to r s ≈ 10 ns and enables the generation of trigger signals, i.e., the mirror control signal, without a time lag. The read-out circuitry is designed as a carrier frequency system, which enables flexible choices of bandwidth and measurement signal frequency. It thus allows for separation in frequency from coupling parasitics, i.e., other frequencies present in the device under test, and makes the read-out quasi-noise-immune.

Lisa-Marie Faller

Biography

JoVE Journal Publications

Other Publications