application-coupling-agent-to-improve-dielectric-properties-polymer

Application of a Coupling Agent to Improve the Dielectric Properties of Polymer-Based Nanocomposites

In this work, an easy, low-cost, and widely applicable method was developed to improve the compatibility between the ceramic fillers and the polymer ...

Taiyuan University of Science and Technology

Heavy Machinery Engineering Research Center of the Ministry of Education

Low chromium ferritic stainless steel has great potential in automobile structures for improved strength. In this study, quenching and partitioning (Q-P) treatment was applied to a low-carbon-chromium ferritic stainless steel and compared with traditional heat treatment (quenching-tempering [Q-T] and annealing) in terms of microstructure, mechanical properties, corrosion resistance, and deformation of plate. The results show that the quenching and partitioning (Q-P) treatment has a series of advantages over conventional heat treatments (quenching-tempering and annealing). In terms of mechanical properties, it achieves a good match between strength and plasticity by combining the advantages of "soft state" with high elongation resulting from conventional annealing and high strength "hard state" through the traditional quenching-tempering process. The material possesses better crash safety; for the quenching-partitioning (Q-P) process, quenching-tempering process, and annealing process, the production of strength plasticity is about 16 GPa%, 15 GPa%, and 14 GPa%, respectively. The material has low yield strength, high work hardening index (compared with Q-T), a smooth tensile curve, and no yield plateau (compared with annealing), so it has better forming performance and processing surface, and the corrosion resistance has also improved. The pitting potential of the samples produced by the quenching treatment of Q-P and Q-T increased by about 0.2 V, which is about 20% higher than the one by the traditional annealing process.

Microstructures and Properties of a Low-Carbon-Chromium Ferritic Stainless Steel Treated by a Quenching and Partitioning Process.

A new rolling process of the 304/Q345R composite plate based on a corrugated interface was developed. Through numerical simulation and rolling experiments, the metal deformation law, the stress and strain field distribution, and the bond strength of the corrugated plate were studied. By comparison, the corrugated interface effectively increased the length of the composite interface. Also, the composite interface from the 2D corrugated surface became a 3D corrugated surface, and a combination of the 304/Q345R composite plate metallurgy was achieved with a low reduction rate. Simultaneously, the interface bonding strength was improved.

Article	Year
Microstructures and Properties of a Low-Carbon-Chromium Ferritic Stainless Steel Treated by a Quenching and Partitioning Process. Materials (Basel, Switzerland)\| PubMed ID: 31130678	2019
Composite Plate Rolling Technology of 304/Q345R Based on a Corrugated Interface. Materials (Basel, Switzerland)\| PubMed ID: 31771135	2019

Yugui Li

Biography

JoVE Journal Publications

Other Publications