fabrication-carbon-based-ionic-electromechanically-active-soft

Fabrication of Carbon-Based Ionic Electromechanically Active Soft Actuators

Ionic electromechanically active capacitive laminates are a type of smart material that move in response to electrical stimulation. Due to the soft, ...

University of Tartu

The electromechanically and mechano-electrically active three-layered laminate composed of a Nafion membrane, carbide-derived carbon-based electrodes, and a 1-ethyl-3-methylimidazolium trifluoromethanesulphonate ionic liquid electrolyte responds to humidity gradient and can therefore serve as a differential humidity sensor or an energy harvesting element. The hydrophilic nature of all constituents of the laminate promotes sorption and diffusion of water across the membrane, causing large volumetric effects. Diffusion of water and the formation of a hydration shell around the ionic groups reorient and dislocate the ionic liquid ions, which in turn induce the formation of an electric charge across the electrodes exposed to different levels of ambient humidity. The generated electric charge can be registered as a voltage or electric current between the electrodes. Furthermore, the supercapacitor-like properties of the laminate allow storage of the electric charge in the same laminate, where it was generated.

Charging a supercapacitor-like laminate with ambient moisture: from a humidity sensor to an energy harvester.

A large-scale effort was carried out to test the performance of seven types of ionic electroactive polymer (IEAP) actuators in space-hazardous environmental factors in laboratory conditions. The results substantiate that the IEAP materials are tolerant to long-term freezing and vacuum environments as well as ionizing Gamma-, X-ray, and UV radiation at the levels corresponding to low Earth orbit (LEO) conditions. The main aim of this material behaviour investigation is to understand and predict device service time for prolonged exposure to space environment. 

Ionic electroactive polymer artificial muscles in space applications.

Soft robots hold promise for well-matched interactions with delicate objects, humans and unstructured environments owing to their intrinsic material compliance. Movement and stiffness modulation, which is challenging yet needed for an effective demonstration, can be devised by drawing inspiration from plants. Plants use a coordinated and reversible modulation of intracellular turgor (pressure) to tune their stiffness and achieve macroscopic movements. Plant-inspired osmotic actuation was recently proposed, yet reversibility is still an open issue hampering its implementation, also in soft robotics. Here we show a reversible osmotic actuation strategy based on the electrosorption of ions on flexible porous carbon electrodes driven at low input voltages (1.3 V). We demonstrate reversible stiffening (~5-fold increase) and actuation (~500 deg rotation) of a tendril-like soft robot (diameter ~1 mm). Our approach highlights the potential of plant-inspired technologies for developing soft robots based on biocompatible materials and safe voltages making them appealing for prospective applications.

Article	Year
Charging a supercapacitor-like laminate with ambient moisture: from a humidity sensor to an energy harvester. Physical chemistry chemical physics : PCCP\| PubMed ID: 23673406	2013
Ionic electroactive polymer artificial muscles in space applications. Scientific reports\| PubMed ID: 25372857	2014
A variable-stiffness tendril-like soft robot based on reversible osmotic actuation. Nature communications\| PubMed ID: 30664648	2019

Indrek Must

Biography

JoVE Journal Publications

Other Publications