an-externally-heated-diamond-anvil-cell-for-synthesis-single-crystal

An Externally-Heated Diamond Anvil Cell for Synthesis and Single-Crystal Elasticity Determination of Ice-VII at High Pressure-Temperature Conditions

The externally-heated diamond anvil cell (EHDAC) can be used to generate simultaneously high-pressure and high-temperature conditions found in ...

University of Chicago

Experimental and theoretical studies on the compositional dependence of stability and compressibility in lithiated cubic titania are presented. The crystalline-to-amorphous phase transition pressure increases monotonically with Li concentration (from ∼17.5  GPa for delithiated to no phase transition for fully lithiated cubic titania up to 60 GPa). The associated enhancement in structural stability is postulated to arise from a vacancy filling mechanism in which an applied pressure drives interstitial Li ions to vacancy sites in the oxide interior. The results are of significance for understanding mechanisms of structural response of metal oxide electrode materials at high pressures as well as emerging energy storage technologies utilizing such materials.

Compositional tuning of structural stability of lithiated cubic titania via a vacancy-filling mechanism under high pressure.

Supercritical fluids play a significant role in elucidating fundamental aspects of liquid matter under extreme conditions. They have been extensively studied at pressures and temperatures relevant to various industrial applications. However, much less is known about the structural behaviour of supercritical fluids and no structural crossovers have been observed in static compression experiments in any temperature and pressure ranges beyond the critical point. The structure of supercritical state is currently perceived to be uniform everywhere on the pressure-temperature phase diagram, and to change only in a monotonic way even moving around the critical point, not only along isotherms or isobars. Conversely, we observe structural crossovers for the first time in a deeply supercritical sample through diffraction measurements in a diamond anvil cell and discover a new thermodynamic boundary on the pressure-temperature diagram. We explain the existence of these crossovers in the framework of the phonon theory of liquids using molecular dynamics simulations. The obtained results are of prime importance since they imply a global reconsideration of the mere essence of the supercritical phase. Furthermore, this discovery may pave the way to new unexpected applications and to the exploration of exotic behaviour of confined fluids relevant to geo- and planetary sciences. 

The Frenkel Line: a direct experimental evidence for the new thermodynamic boundary.

Alternative approaches to evaluating the hardness and elastic properties of materials exhibiting physical properties comparable to pure diamond have recently become necessary. The classic linear relationship between shear modulus (G) and Vickers hardness (H), along with more recent non-linear formulations based on Pugh's modulus extending into the superhard region (H > 40 GPa) have guided synthesis and identification of novel superabrasives. These schemes rely on accurately quantifying H of diamond-like materials approaching or potentially exceeding the hardness of the diamond indenter, leading to debate about methodology and the very definition of hardness. Elasticity measurements on such materials are equally challenging. Here we used a high-precision, GHz-ultrasonic interferometer in conjunction with a newly developed optical contact micrometer and 3D optical microscopy of indentations to evaluate elasticity-hardness relations in the ultrahard range (H > 80 GPa) by examining single-crystal boron-doped diamond (BDD) with boron contents ranging from 50-3000 ppm. We observe a drastic elastic-mechanical softening in highly doped BDD relative to the trends observed for superhard materials, providing insight into elasticity-hardness relations for ultrahard materials.

Elastic and mechanical softening in boron-doped diamond.

The structural evolution of lanthanide ATiO (A = Dy, Gd, Yb, Er) at high pressure is investigated using synchrotron X-ray diffraction. The effects of A-site cation size and of the initial structure are systematically examined by varying the composition of the isostructural lanthanide titanates and the structure of dysprosium titanate polymorphs (orthorhombic, hexagonal, and cubic), respectively. All samples undergo irreversible high-pressure phase transformations, but with different onset pressures depending on the initial structure. While each individual phase exhibits different phase transformation histories, all samples commonly experience a sluggish transformation to a defect cotunnite-like (Pnma) phase for a certain pressure range. Orthorhombic DyTiO and GdTiO form P2am at pressures below 9 GPa and Pnma above 13 GPa. Pyrochlore-type DyTiO and ErTiO as well as defect-fluorite-type YbTiO form Pnma at ∼21 GPa, followed by Im3̅m. Hexagonal DyTiO forms Pnma directly, although a small amount of remnants of hexagonal DyTiO is observed even at the highest pressure (∼55 GPa) reached, indicating kinetic limitations in the hexagonal DyTiO phase transformations at high pressure. Decompression of these materials leads to different metastable phases. Most interestingly, a high-pressure cubic X-type phase (Im3̅m) is confirmed using high-resolution transmission electron microscopy on recovered pyrochlore-type ErTiO. The kinetic constraints on this metastable phase yield a mixture of both the X-type phase and amorphous domains upon pressure release. This is the first observation of an X-type phase for an ABO composition at high pressure.

ATiO (A = Dy, Gd, Er, Yb) at High Pressure.

Synthetic MgTiO qandilite was investigated to 50 and 40.4 GPa at room temperature using Raman spectroscopy and X-ray diffraction, respectively. The Raman measurements showed that cubic MgTiO spinel transforms to a high pressure tetragonal (I4/amd, No.141) phase at 14.7 GPa. Owing to sluggish kinetics at room temperature, the spinel phase coexists with the tetragonal phase between 14.7 and 24.3 GPa. In the X-ray diffraction experiment, transformation of the cubic MgTiO to the tetragonal structure was complete by 29.2 GPa, ~5 GPa higher than the transition pressure obtained by Raman measurements, owing to slow kinetics. The obtained isothermal bulk modulus of MgTiO spinel is K = 148(3) GPa when K' = 6.6, or K = 166(1) GPa when K' is fixed at 4. The isothermal bulk modulus of the high-pressure tetragonal phase is calculated to be 209(2) GPa and V = 270(2) Å when K' is fixed at 4, and the volume reduction on change from cubic to tetragonal phase is about 9%. The calculated thermal Grüneisen parameters (γ) of cubic and tetragonal MgTiO phases are 1.01 and 0.63. Based on the radii ratio of spinel cations, a simple model is proposed to predict post-spinel structures.

Raman and X-ray diffraction study of pressure-induced phase transition in synthetic MgTiO.

Sub-Neptunes are common among the discovered exoplanets. However, lack of knowledge on the state of matter in [Formula: see text]O-rich setting at high pressures and temperatures ([Formula: see text]) places important limitations on our understanding of this planet type. We have conducted experiments for reactions between [Formula: see text] and [Formula: see text]O as archetypal materials for rock and ice, respectively, at high [Formula: see text] We found anomalously expanded volumes of dense silica (up to 4%) recovered from hydrothermal synthesis above ∼24 GPa where the [Formula: see text]-type (Ct) structure appears at lower pressures than in the anhydrous system. Infrared spectroscopy identified strong OH modes from the dense silica samples. Both previous experiments and our density functional theory calculations support up to 0.48 hydrogen atoms per formula unit of ([Formula: see text])[Formula: see text] At pressures above 60 GPa, [Formula: see text]O further changes the structural behavior of silica, stabilizing a niccolite-type structure, which is unquenchable. From unit-cell volume and phase equilibrium considerations, we infer that the niccolite-type phase may contain H with an amount at least comparable with or higher than that of the Ct phase. Our results suggest that the phases containing both hydrogen and lithophile elements could be the dominant materials in the interiors of water-rich planets. Even for fully layered cases, the large mutual solubility could make the boundary between rock and ice layers fuzzy. Therefore, the physical properties of the new phases that we report here would be important for understanding dynamics, geochemical cycle, and dynamo generation in water-rich planets.

Article	Year
Compositional tuning of structural stability of lithiated cubic titania via a vacancy-filling mechanism under high pressure. Physical review letters\| PubMed ID: 25166416	2013
The Frenkel Line: a direct experimental evidence for the new thermodynamic boundary. Scientific reports\| PubMed ID: 26537668	2015
Elastic and mechanical softening in boron-doped diamond. Scientific reports\| PubMed ID: 28233808	2017
ATiO (A = Dy, Gd, Er, Yb) at High Pressure. Inorganic chemistry\| PubMed ID: 29420026	2018
Raman and X-ray diffraction study of pressure-induced phase transition in synthetic MgTiO. Scientific reports\| PubMed ID: 32286425	2020
Large HO solubility in dense silica and its implications for the interiors of water-rich planets. Proceedings of the National Academy of Sciences of the United States of America\| PubMed ID: 32312811	2020

Sergey Tkachev

Biography

JoVE Journal Publications

Other Publications