3d-cell-printed-hypoxic-cancer-on-chip-for-recapitulating-pathologic

3D Cell-Printed Hypoxic Cancer-on-a-Chip for Recapitulating Pathologic Progression of Solid Cancer

Cancer microenvironment has a significant impact on the progression of the disease. In particular, hypoxia is the key driver of cancer survival, invasion, ...

high-throughput-bioprinting-method-for-modeling-vascular-permeability

High-Throughput Bioprinting Method for Modeling Vascular Permeability in Standard Six-well Plates with Size and Pattern Flexibility

Vascular permeability is a key factor in developing therapies for disorders associated with compromised endothelium, such as endothelial dysfunction in ...

Pohang University of Science and Technology (POSTECH)

Chonnam National University

Neurodegenerative diseases are among the most severe problems in aging societies. Various conventional experimental models, including 2D and animal models, have been used to investigate the pathogenesis of (and therapeutic mechanisms for) neurodegenerative diseases. However, the physiological gap between humans and the current models remains a hurdle to determining the complexity of an irreversible dysfunction in a neurodegenerative disease. Therefore, preclinical research requires advanced experimental models, i.e., those more physiologically relevant to the native nervous system, to bridge the gap between preclinical stages and patients. The neural microphysiological system (neural MPS) has emerged as an approach to summarizing the anatomical, biochemical, and pathological physiology of the nervous system for investigation of neurodegenerative diseases. This review introduces the components (such as cells and materials) and fabrication methods for designing a neural MPS. Moreover, the review discusses future perspectives for improving the physiological relevance to native neural systems.

Microphysiological Systems for Neurodegenerative Diseases in Central Nervous System.

Coronavirus disease 2019 (COVID-19), which has recently emerged as a global pandemic, has caused a serious economic crisis due to the social disconnection and physical distancing in human society. To rapidly respond to the emergence of new diseases, a reliable in vitro model needs to be established expeditiously for the identification of appropriate therapeutic agents. Such models can be of great help in validating the pathological behavior of pathogens and therapeutic agents. Recently, in vitro models representing human organs and tissues and biological functions have been developed based on high-precision 3D bioprinting. In this paper, we delineate an in-depth assessment of the recently developed 3D bioprinting technology and bioinks. In particular, we discuss the latest achievements and future aspects of the use of 3D bioprinting for in vitro modeling.

3D Bioprinting of In Vitro Models Using Hydrogel-Based Bioinks.

Rapid development of vaccines and therapeutics is necessary to tackle the emergence of new pathogens and infectious diseases. To speed up the drug discovery process, the conventional development pipeline can be retooled by introducing advanced in vitro models as alternatives to conventional infectious disease models and by employing advanced technology for the production of medicine and cell/drug delivery systems. In this regard, layer-by-layer construction with a 3D bioprinting system or other technologies provides a beneficial method for developing highly biomimetic and reliable in vitro models for infectious disease research. In addition, the high flexibility and versatility of 3D bioprinting offer advantages in the effective production of vaccines, therapeutics, and relevant delivery systems. Herein, we discuss the potential of 3D bioprinting technologies for the control of infectious diseases. We also suggest that 3D bioprinting in infectious disease research and drug development could be a significant platform technology for the rapid and automated production of tissue/organ models and medicines in the near future.

Application of 3D bioprinting in the prevention and the therapy for human diseases.

Cancer models are essential in cancer research and for new drug development pipelines. However, conventional cancer tissue models have failed to capture the human cancer physiology, thus hindering drug discovery. The major challenge is the establishment of physiologically relevant cancer models that reflect the complexity of the tumor microenvironment (TME). The TME is a highly complex milieu composed of diverse factors that are associated with cancer progression and metastasis, as well as with the development of cancer resistance to therapeutics. To emulate the TME, 3D bioprinting has emerged as a way to create engineered cancer tissue models. Bioprinted cancer tissue models have the potential to recapitulate cancer pathology and increased drug resistance in an organ-mimicking 3D environment. This review overviews the bioprinting technologies used for the engineering of cancer tissue models and provides a future perspective on bioprinting to further advance cancer research.

Introduction to bioprinting of in vitro cancer models.

3D cell printing technology is in the spotlight for producing 3D tissue or organ constructs useful for various medical applications. In printing of neuromuscular tissue, a bioink satisfying all the requirements is a challenging issue. Gel integrity and motor neuron activity are two major characters because a harmonious combination of extracellular materials essential to motor neuron activity consists of disadvantages in mechanical properties. Here, a method for fabrication of 3D neuromuscular tissue is presented using a porcine central nervous system tissue decellularized extracellular matrix (CNSdECM) bioink. CNSdECM retains CNS tissue-specific extracellular molecules, provides rheological properties crucial for extrusion-based 3D cell printing, and reveals positive effects on the growth and maturity of axons of motor neurons compared with Matrigel. It also allows long-term cultivation of human-induced-pluripotent-stem-cell-derived lower motor neurons and sufficiently supports their cellular behavior to carry motor signals to muscle fibers. CNSdECM bioink holds great promise for producing a tissue-engineered motor system using 3D cell printing.

Promoting Long-Term Cultivation of Motor Neurons for 3D Neuromuscular Junction Formation of 3D In Vitro Using Central-Nervous-Tissue-Derived Bioink.

Traumatic brain injury is one of the leading causes of accidental death and disability. The loss of parts in a severely injured brain induces edema, neuronal apoptosis, and neuroinflammation. Recently, stem cell transplantation demonstrated regenerative efficacy in an injured brain. However, the efficacy of current stem cell therapy needs improvement to resolve issues such as low survival of implanted stem cells and low efficacy of differentiation into respective cells. We developed brain-derived decellularized extracellular matrix (BdECM) bioink that is printable and has native brain-like stiffness. This study aimed to fabricate injured cavity-fit scaffold with BdECM bioink and assessed the utility of BdECM bioink for stem cell delivery to a traumatically injured brain. Our BdECM bioink had shear thinning property for three-dimensional (3D)-cell-printing and physical properties and fiber structures comparable to those of the native brain, which is important for tissue integration after implantation. The human neural stem cells (NSCs) (F3 cells) laden with BdECM bioink were found to be fully differentiated to neurons; the levels of markers for mature differentiated neurons were higher than those observed with collagen bioink. Moreover, the BdECM bioink demonstrated potential in defect-fit carrier fabrication with 3D cell-printing, based on the rheological properties and shape fidelity of the material. As F3 cell-laden BdECM bioink was transplanted into the motor cortex of a rat brain, high efficacy of differentiation into mature neurons was observed in the transplanted NSCs; notably increased level of MAP2, a marker of neuronal differentiation, was observed. Furthermore, the transplanted-cell bioink suppressed reactive astrogliosis and microglial activation that may impede regeneration of the injured brain. The brain-specific material reported here is favorable for NSC differentiation and suppression of neuroinflammation and is expected to successfully support regeneration of a traumatically injured brain.

Neural stem cell delivery using brain-derived tissue-specific bioink for recovering from traumatic brain injury.

The development of curative therapy for bladder dysfunction is usually hampered owing to the lack of reliable ex vivo human models that can mimic the complexity of the human bladder. To overcome this issue, 3D in vitro model systems offering unique opportunities to engineer realistic human tissues/organs have been developed. However, existing in vitro models still cannot entirely reflect the key structural and physiological characteristics of the native human bladder. In this study, we propose an in vitro model of the urinary bladder that can create 3D biomimetic tissue structures and dynamic microenvironments to replicate the smooth muscle functions of an actual human urinary bladder. In other words, the proposed biomimetic model system, developed using a 3D bioprinting approach, can recreate the physiological motion of the urinary bladder by incorporating decellularized extracellular matrix from the bladder tissue and introducing cyclic mechanical stimuli. The results showed that the developed bladder tissue models exhibited high cell viability and proliferation rate and promoted myogenic differentiation potential given dynamic mechanical cues. We envision the developed in vitro bladder mimicry model can serve as a research platform for fundamental studies on human disease modeling and pharmaceutical testing.

3D Bioprinting of an In Vitro Model of a Biomimetic Urinary Bladder with a Contract-Release System.

In recent years, the characterization and fabrication methods concerning new bioinks have received much attention, largely because the absence of bioprintable materials has been identified as one of the most rudimentary challenges for rapid advancement in the field of three-dimensional (3D) printing. Bioinks for printing mammalian organs have been rapidly produced, but bioinks in the field of plant science remain sparse. Thus, 3D fabrication of plant parts is still in its infancy due to the lack of appropriate bioink materials, and aside from that, the difficulty in recreating sophisticated microarchitectures that accurately and safely mimic natural biological activities is a concern. Therefore, this review article is designed to emphasize the significance of bioinks and their applications in plant bioprinting.

A Review on Bioinks and their Application in Plant Bioprinting.

Dysfunctional blood vessels are implicated in various diseases, including cardiovascular diseases, neurodegenerative diseases, and cancer. Several studies have attempted to prevent and treat vascular diseases and understand interactions between these diseases and blood vessels across different organs and tissues. Initial studies were conducted using 2-dimensional (2D) in vitro and animal models. However, these models have difficulties in mimicking the 3D microenvironment in human, simulating kinetics related to cell activities, and replicating human pathophysiology; in addition, 3D models involve remarkably high costs. Thus, in vitro bioengineered models (BMs) have recently gained attention. BMs created through biofabrication based on tissue engineering and regenerative medicine are breakthrough models that can overcome limitations of 2D and animal models. They can also simulate the natural microenvironment in a patient- and target-specific manner. In this review, we will introduce 3D bioprinting methods for fabricating bioengineered blood vessel models, which can serve as the basis for treating and preventing various vascular diseases. Additionally, we will describe possible advancements from tubular to vascular models. Last, we will discuss specific applications, limitations, and future perspectives of fabricated BMs.

Bioprinting Methods for Fabricating In Vitro Tubular Blood Vessel Models.

Ultrasonic surface acoustic wave (SAW)-induced acoustic streaming flow (ASF) has been utilized for microfluidic flow control, patterning, and mixing. Most previous research employed cross-type SAW acousto-microfluidic mixers, in which the SAWs propagated perpendicular to the flow direction. In this configuration, the flow mixing was induced predominantly by the horizontal component of the acoustic force, which was usually much smaller than the vertical component, leading to energy inefficiency and limited controllability. Here, we propose a vertical-type ultrasonic SAW acousto-microfluidic mixer to achieve rapid flow mixing with improved efficiency and controllability. We conducted in-depth numerical and experimental investigations of the vertical-type SAW-induced ASF to elucidate the acousto-hydrodynamic phenomenon under varying conditions of total flow rate, acoustic wave amplitude, and fluid viscosity conditions. We conducted computational fluid dynamics simulations for numerical flow visualization and utilized micro-prism-embedded microchannels for experimental flow visualization for the vertical SAW-induced ASF. We found that the SAW-induced vortices served as a hydrodynamic barrier for the co-flow streams for controlled flow mixing in the proposed device. For proof-of-concept application, we performed chemical additive-free rapid red blood cell lysis and achieved rapid cell lysis with high lysis efficiency based on the physical interactions of the suspended cells with the SAW-induced acoustic vortical flows. We believe that the proposed vertical-type ultrasonic SAW-based mixer can be broadly utilized for various microfluidic applications that require rapid, controlled flow mixing.

Rapid acoustofluidic mixing by ultrasonic surface acoustic wave-induced acoustic streaming flow.

Non-neural extracellular matrix (ECM) has limited application in humanized physiological neural modeling due to insufficient brain-specificity and safety concerns. Although brain-derived ECM contains enriched neural components, certain essential components are partially lost during the decellularization process, necessitating augmentation. Here, it is demonstrated that the laminin-augmented porcine brain-decellularized ECM (P-BdECM) is xenogeneic factor-depleted as well as favorable for the regulation of human neurons, astrocytes, and microglia. P-BdECM composition is comparable to human BdECM regarding brain-specificity through the matrisome and gene ontology-biological process analysis. As augmenting strategy, laminin 111 supplement promotes neural function by synergic effect with laminin 521 in P-BdECM. Annexin A1(ANXA1) and Peroxiredoxin(PRDX) in P-BdECM stabilized microglial and astrocytic behavior under normal while promoting active neuroinflammation in response to neuropathological factors. Further, supplementation of the brain-specific molecule to non-neural matrix also ameliorated glial cell inflammation as in P-BdECM. In conclusion, P-BdECM-augmentation strategy can be used to recapitulate humanized pathophysiological cerebral environments for neurological study.

Laminin-Augmented Decellularized Extracellular Matrix Ameliorating Neural Differentiation and Neuroinflammation in Human Mini-Brains.

This study explores the potential of plant-based decellularization in regenerative medicine, a pivotal development in tissue engineering focusing on scaffold development, modification, and vascularization. Plant decellularization involves removing cellular components from plant structures, offering an eco-friendly and cost-effective alternative to traditional scaffold materials. The use of plant-derived polymers is critical, presenting both benefits and challenges, notably in mechanical properties. Integration of plant vascular networks represents a significant bioengineering breakthrough, aligning with natural design principles. The paper provides an in-depth analysis of development protocols, scaffold fabrication considerations, and illustrative case studies showcasing plant-based decellularization applications. This technique is transformative, offering sustainable scaffold design solutions with readily available plant materials capable of forming perfusable structures. Ongoing research aims to refine protocols, assess long-term implications, and adapt the process for clinical use, indicating a path toward widespread adoption. Plant-based decellularization holds promise for regenerative medicine, bridging biological sciences with engineering through eco-friendly approaches. Future perspectives include protocol optimization, understanding long-term impacts, clinical scalability, addressing mechanical limitations, fostering collaboration, exploring new research areas, and enhancing education. Collectively, these efforts envision a regenerative future where nature and scientific innovation converge to create sustainable solutions, offering hope for generations to come.

Plant-Based Decellularization: A Novel Approach for Perfusion-Compatible Tissue Engineering Structures.

Diabetes mellitus (DM) has substantial global implications and contributes to vascular inflammation and the onset of atherosclerotic cardiovascular diseases. However, translating the findings from animal models to humans has inherent limitations, necessitating a novel platform. Therefore, herein, an arterial model is established using a microphysiological system. This model successfully replicates the stratified characteristics of human arteries by integrating collagen, endothelial cells (ECs), and vascular smooth muscle cells (VSMCs). Perfusion via a peristaltic pump shows dynamic characteristics distinct from those of static culture models. High glucose, advanced glycation end products (AGEs), and interleukin-1 beta are employed to stimulate diabetic conditions, resulting in notable cellular changes and different levels of cytokines and nitric oxide. Additionally, the interactions between the disease models and oxidized low-density lipoproteins (LDL) are examined. Finally, the potential therapeutic effects of metformin, atorvastatin, and diphenyleneiodonium are investigated. Metformin and diphenyleneiodonium mitigate high-glucose- and AGE-associated pathological changes, whereas atorvastatin affects only the morphology of ECs. Altogether, the arterial model represents a pivotal advancement, offering a robust and insightful platform for investigating cardiovascular diseases and their corresponding drug development.

Investigation of the Dysfunction Caused by High Glucose, Advanced Glycation End Products, and Interleukin-1 Beta and the Effects of Therapeutic Agents on the Microphysiological Artery Model.

Three-dimensional bioprinting has revolutionized tissue engineering by enabling the fabrication of complex and functional human tissues and organs. An essential component of successful 3D bioprinting is the selection of an appropriate bioink capable of supporting cell proliferation and viability. Plant-derived biomaterials, because of their abundance, biocompatibility, and tunable properties, hold promise as bioink sources, thus offering advantages over animal-derived biomaterials, which carry immunogenic concerns. This comprehensive review explores and analyzes the potential of plant-derived biomaterials as bioinks for 3D bioprinting of human tissues. Modification and optimization of these materials to enhance printability and biological functionality are discussed. Furthermore, cancer research and drug testing applications of the use of plant-based biomaterials in bioprinting various human tissues such as bone, cartilage, skin, and vascular tissues are described. Challenges and limitations, including mechanical integrity, cell viability, resolution, and regulatory concerns, along with potential strategies to overcome them, are discussed. Additionally, this review provides insights into the potential use of plant-based dECM as bioinks, future prospects, and emerging trends in the use of plant-derived biomaterials for 3D bioprinting applications. The potential of plant-derived biomaterials as bioinks for 3D bioprinting of human tissues is highlighted herein. However, further research is necessary to optimize their processing, standardize their properties, and evaluate their long-term in vivo performance. Continued advancements in plant-derived biomaterials have the potential to revolutionize tissue engineering and facilitate the development of functional and regenerative therapies for diverse clinical applications.

Bioinks for bioprinting using plant-derived biomaterials.

Atherosclerosis accounts for two-thirds of deaths attributed to cardiovascular diseases, which continue to be the leading cause of mortality. Current clinical management strategies for atherosclerosis, such as angioplasty with stenting, face numerous challenges, including restenosis and late thrombosis. Smart stents, integrated with sensors that can monitor cardiovascular health in real-time, are being developed to overcome these limitations. This development necessitates rigorous preclinical trials on either animal models or  models. Despite efforts being made, a suitable human-scale  model compatible with a cardiovascular stent has remained elusive. To address this need, this study utilizes an in-bath bioprinting method to create a human-scale, freestanding  model compatible with cardiovascular stents. Using a coaxial nozzle, a tubular structure of human coronary artery (HCA) size is bioprinted with a collagen-based bioink, ensuring good biocompatibility and suitable rheological properties for printing. We precisely replicated the dimensions of the HCA, including its internal diameter and wall thickness, and simulated the vascular barrier functionality. To simplify post-processing, a pumpless perfusion bioreactor is fabricated to culture a HCA-sized model, eliminating the need for a peristaltic pump and enabling scalability for high-throughput production. This model is expected to accelerate stent development in the future.

ArticleTotal : 2	Year
Publication title Cited by 7	2021
Publication title	2024

Article	Year
Microphysiological Systems for Neurodegenerative Diseases in Central Nervous System. Micromachines\| PubMed ID: 32947879	2020
3D Bioprinting of In Vitro Models Using Hydrogel-Based Bioinks. Polymers\| PubMed ID: 33498852	2021
Application of 3D bioprinting in the prevention and the therapy for human diseases. Signal transduction and targeted therapy\| PubMed ID: 33986257	2021
Introduction to bioprinting of in vitro cancer models. Essays in biochemistry\| PubMed ID: 34028520	2021
Promoting Long-Term Cultivation of Motor Neurons for 3D Neuromuscular Junction Formation of 3D In Vitro Using Central-Nervous-Tissue-Derived Bioink. Advanced healthcare materials\| PubMed ID: 34363335	2021
Neural stem cell delivery using brain-derived tissue-specific bioink for recovering from traumatic brain injury. Biofabrication\| PubMed ID: 34551404	2021
3D Bioprinting of an In Vitro Model of a Biomimetic Urinary Bladder with a Contract-Release System. Micromachines\| PubMed ID: 35208401	2022
A Review on Bioinks and their Application in Plant Bioprinting. International journal of bioprinting\| PubMed ID: 36404783	2022
Bioprinting Methods for Fabricating In Vitro Tubular Blood Vessel Models. Cyborg and bionic systems (Washington, D.C.)\| PubMed ID: 37533545	2023
Rapid acoustofluidic mixing by ultrasonic surface acoustic wave-induced acoustic streaming flow. Ultrasonics sonochemistry\| PubMed ID: 37683414	2023
Laminin-Augmented Decellularized Extracellular Matrix Ameliorating Neural Differentiation and Neuroinflammation in Human Mini-Brains. Small (Weinheim an der Bergstrasse, Germany)\| PubMed ID: 38161254	2024
Plant-Based Decellularization: A Novel Approach for Perfusion-Compatible Tissue Engineering Structures. Journal of microbiology and biotechnology\| PubMed ID: 38563106	2024
Investigation of the Dysfunction Caused by High Glucose, Advanced Glycation End Products, and Interleukin-1 Beta and the Effects of Therapeutic Agents on the Microphysiological Artery Model. Advanced healthcare materials\| PubMed ID: 38575148	2024
Bioinks for bioprinting using plant-derived biomaterials. Biofabrication\| PubMed ID: 39079554	2024
Coaxial bioprinting of a stentable and endothelialized human coronary artery-sized model. Journal of materials chemistry. B\| PubMed ID: 39119756	2024

Hee-Gyeong Yi

Biography

JoVE Journal Publications

Other Publications