biplanar-videoradiography-to-study-wrist-distal-radioulnar

Biplanar Videoradiography to Study the Wrist and Distal Radioulnar Joints

Accurate measurement of skeletal kinematics in vivo is essential for understanding normal joint function, the influence of pathology, disease progression, ...

Brown University

Total Wrist Arthroplasty (TWA) for improving the functionality of severe wrist joint pathology has not had the same success, in parameters such as motion restoration and implant survival, as hip, knee, and shoulder arthroplasty. These other arthroplasties have been studied extensively, including the use of biplane videoradiography (BVR) that has allowed investigators to study the in-vivo motion of the total joint replacement during dynamic activities. The wrist has not been a previous focus, and utilization of BVR for wrist arthroplasty presents unique challenges due to the design characteristics of TWAs. Accordingly, the aims of this study were 1) to develop a methodology for generating TWA component models for use in BVR, and 2) to evaluate the accuracy of model-image registration in a single cadaveric model. A model of the carpal component was constructed from a CT scan, and a model of the radial component was generated from a surface scanner. BVR was acquired for three anatomical tasks from a cadaver specimen. Optical motion capture was used as the gold standard. BVR's bias in flexion/extension, radial/ulnar deviation, and pronosupination was less than 0.3°, 0.5°, and 0.6°. Translation bias was less than 0.2 mm with a standard deviation of less than 0.4 mm. This BVR technique achieved a kinematic accuracy comparable to previous studies on other total joint replacements. BVR's application to the study of TWA function in patients could advance the understanding of TWA and thus the implant's success.

Kinematic Accuracy in Tracking Total Wrist Arthroplasty with Biplane Videoradiography using a CT-generated Model.

Accurately assessing the dynamic kinematics of the skeletal wrist could advance our understanding of the normal and pathological wrist. Biplane videoradiography (BVR) has allowed investigators to study dynamic activities in the knee, hip, and shoulder joint; however, currently, BVR has not been utilized for the wrist joint because of the challenges associated with imaging multiple overlapping bones. Therefore, our aim was to develop a BVR procedure and to quantify its accuracy for evaluation of wrist kinematics. BVR was performed on six cadaveric forearms for one neutral static and six dynamic tasks, including flexion-extension, radial-ulnar deviation, circumduction, pronation, supination, and hammering. Optical motion capture (OMC) served as the gold standard for assessing accuracy. We propose a feedforward tracking methodology, which uses a combined model of metacarpals (second and third) for initialization of the third metacarpal (MC3). BVR-calculated kinematic parameters were found to be consistent with the OMC-calculated parameters, and the BVR/OMC agreement had submillimeter and sub-degree biases in tracking individual bones as well as the overall joint's rotation and translation. All dynamic tasks (except pronation task) showed a limit of agreement within 1.5° for overall rotation, and within 1.3 mm for overall translations. Pronation task had a 2.1° and 1.4 mm limit of agreement for rotation and translation measurement. The poorest precision was achieved in calculating the pronation-supination angle, and radial-ulnar and volar-dorsal translational components, although they were sub-degree and submillimeter. The methodology described herein may assist those interested in examining the complexities of skeletal wrist function during dynamic tasks.

Accuracy of biplane videoradiography for quantifying dynamic wrist kinematics.

The wrist can be considered a 2 degrees-of-freedom joint with all movements reflecting the combination of flexion-extension and radial-ulnar deviation. Wrist motions are accomplished by the kinematic reduction of the 42 degrees-of-freedom of the individual carpal bones. While previous studies have demonstrated the minimal motion of the scaphoid and lunate as the wrist moves along the dart-thrower's path or small relative motion between hamate-capitate-trapezoid, an understanding of the kinematics of the complete carpus across all wrist motions remains lacking. To address this, we assembled an open-source database of in vivo carpal motions and developed mathematical models of the carpal kinematics as a function of wrist motion. Quadratic surfaces were trained for each of the 42-carpal bone degrees-of-freedom and the goodness of fits were evaluated. Using the models, paths of wrist motion that generated minimal carpal rotations or translations were determined. Model predictions were best for flexion-extension, radial-ulnar deviation, and volar-dorsal translations for all carpal bones with R   > 0.8, while the estimates were least effective for supination-pronation with R   < 0.6. The wrist path of motion's analysis indicated that the distal row of carpal bones moves rigidly together (<3° motion), along the anatomical axis of wrist motion, while the bones in the proximal row undergo minimal motion when the wrist moves in a path oblique to the main axes. The open-source dataset along with its graphical user interface and mathematical models should facilitate clinical visualization and enable new studies of carpal kinematics and function. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:2661-2670, 2019.

Predicting Carpal Bone Kinematics Using an Expanded Digital Database of Wrist Carpal Bone Anatomy and Kinematics.

Osteophytes are associated with later stage osteoarthritis and are most commonly described using semiquantitative radiographic grading systems. A detailed understanding of osteophyte formation is, in part, limited by the ability to quantify bone pathology. Osteophytes can be quantified relative to pre-osteoarthritic bone, or to the contralateral bone if it is healthy; however, in many cases, neither are available as references. We present a method for computing three-dimensional (3D) osteophyte models using a library of healthy control bones. An existing data set containing the computed tomography scans of 90 patients with first carpometacarpal osteoarthritis (OA) and 46 healthy subjects were utilized. A healthy bone that best fit each OA subject's bone was determined using a dissimilarity-excluding Procrustes registration technique (DEP) that minimized the influence of dissimilar features (ie, osteophytes). The osteophyte model was then computed through Boolean subtraction of the reference bone model from the OA bone model. DEP reference bones conformed significantly better to the OA bones (P < .0001) than by finite difference iterative closest point registration (root mean squared distances, 0.33 ± 0.05 and 0.41 ± 0.16 mm, respectively). The effect of library size on dissimilarity measure was investigated by leave-k-out cross-validation randomly reducing k from 46 to 1. A library of n ≥ 31 resulted in less than 10% difference from the theoretical minimum value. The proposed method enables quantification of osteophytes when the disease-free bone or the healthy contralateral bone is not available for any 3D data set. Quantifying osteophyte formation and growth may aid in understating the associated mechanisms in OA.

Osteophyte volume calculation using dissimilarity-excluding Procrustes registration of archived bone models from healthy volunteers.

Methods for capturing wrist range of motion (RoM) vary in complexity, cost, and sensitivity. Measures by manual goniometer, though an inexpensive modality, provide neither dynamic nor objective motion data. Conversely, optical motion capture systems are widely used in three-dimensional scientific motion capture studies but are complex and expensive. The electrogoniometer bridges the gap between portability and objective measurement. Our study aims to evaluate the accuracy of a 2 degree of freedom electrogoniometer using optical motion capture as the reference for in vivo wrist motion. First, a mechanical system constructed from two plastic pipes and a universal joint mimicked a human wrist to assess the inherent accuracy of the electrogoniometer. Simulations of radial/ulnar deviation (R/U), flexion/extension (F/E) and circumduction were evaluated. Second, six subjects performed three RoM tasks of R/U deviation, F/E, and circumduction for evaluation of the in vivo accuracy. Bland-Altman analysis quantified the accuracy. The mechanical experiment reported greater accuracy than the in vivo study with mean difference values less than ±1°. The in vivo accuracy varied across RoM tasks, with mean differences greatest in the F/E task (7.2°). Smaller mean differences values were reported in the R/U deviation task (-0.8°) and the circumduction task (1.2°).

Accuracy of an electrogoniometer relative to optical motion tracking for quantifying wrist range of motion.

Reproduction of healthy wrist biomechanics should minimize the abnormal joint forces that could potentially result in the failure of a total wrist arthroplasty (TWA). To date, the in vivo kinematics of TWA have not been measured and it is unknown if TWA preserves healthy wrist kinematics. Therefore, the purpose of this in vivo study was to determine the center of rotation (COR) for a current TWA design and to compare its location to the healthy wrist. The wrist COR for six patients with TWA and 10 healthy subjects were calculated using biplane videoradiography as the subjects performed various range-of-motion and functional tasks that included coupled wrist motions. An open-source registration software, Autoscoper, was used for model-based tracking and kinematics analysis. It was demonstrated that the COR was located near the centers of curvatures of the carpal component for the anatomical motions of flexion-extension and radial-ulnar deviation. When compared to healthy wrists, the COR of TWAs was located more distal in both pure radial deviation (P < .0001) and pure ulnar deviation (P = .07), while there was no difference in its location in pure flexion or extension (P = .99). Across all coupled motions, the TWA's COR shifted more than two times that of the healthy wrists in the proximal-distal direction (17.1 vs 7.2 mm). We postulate that the mismatch in the COR location and behavior may be associated with increased loading of the TWA components, leading to an increase in the risk of component and/or interface failure.

Article	Year
Kinematic Accuracy in Tracking Total Wrist Arthroplasty with Biplane Videoradiography using a CT-generated Model. Journal of biomechanical engineering\| PubMed ID: 30729978	2019
Accuracy of biplane videoradiography for quantifying dynamic wrist kinematics. Journal of biomechanics\| PubMed ID: 31174845	2019
Predicting Carpal Bone Kinematics Using an Expanded Digital Database of Wrist Carpal Bone Anatomy and Kinematics. Journal of orthopaedic research : official publication of the Orthopaedic Research Society\| PubMed ID: 31378991	2019
Osteophyte volume calculation using dissimilarity-excluding Procrustes registration of archived bone models from healthy volunteers. Journal of orthopaedic research : official publication of the Orthopaedic Research Society\| PubMed ID: 31840852	2020
Accuracy of an electrogoniometer relative to optical motion tracking for quantifying wrist range of motion. Journal of medical engineering & technology\| PubMed ID: 31997679	2020
Proximal-distal shift of the center of rotation in a total wrist arthroplasty is more than twice of the healthy wrist. Journal of orthopaedic research : official publication of the Orthopaedic Research Society\| PubMed ID: 32401391	2020

Bardiya Akhbari

Biography

JoVE Journal Publications

Other Publications