interlinked-macroporous-3d-scaffolds-from-microgel-rods

Interlinked Macroporous 3D Scaffolds from Microgel Rods

A two-component system of functionalized microgels from microfluidics allows for fast interlinking into 3D macroporous constructs in aqueous solutions ...

DWI - Leibniz Institute for Interactive Materials

RWTH Aachen University

Soft amphoteric microgel systems exhibit a rich phase behavior. Crystalline phases of these material systems are of interest because they exhibit photonic stop-gaps, giving rise to iridescent color. Such microgel systems are promising for applications in soft, switchable, and programmable photonic filters and devices. We here report a composite microgel system consisting of a hard and fluorescently labeled core and a soft, amphoteric microgel shell. At pH above the isoelectric point (IEP), these colloids easily crystallize into three-dimensional colloidal assemblies. By adding a cyclic lactone to the system, the temporal pH profile can be controlled, and the microgels can be programmed to melt, while they lose charge. When the microgels gain the opposite charge, they recrystallize into assemblies of even higher order. We provide a model system to study the dynamic phase behavior of soft particles and their switchable and programmable photonic effects.

Programmable Phase Transitions in a Photonic Microgel System: Linking Soft Interactions to a Temporal pH Gradient.

A plethora of natural systems rely on the consumption of chemical fuel or input of external energy to control the assembly and disassembly of functional structures on demand. While dissipative assembly has been demonstrated, the control of structural breakdown using a dissipative cycle remains almost unexplored. Here, we propose and realize a dissipative disassembly process using two coupled cyclic reactions, in which protons mediate the interaction between the cycles. We show how an ordered colloidal crystal, can cyclically transform into a disordered state by addition of energy to a chemical cycle, reversibly activating a photoacid. This cycle is coupled to the colloidal assembly cycle via the exchange of protons, which in turn trigger charging of the particles. This system is an experimental realization of a cyclic reaction-assembly network and its principle can be extended to other types of structure formation.

Dissipative disassembly of colloidal microgel crystals driven by a coupled cyclic reaction network.

Recent advances in the field of bioprinting have led to the development of perfusable complex structures. However, most of the existing printed vascular channels lack the composition or key structural and physiological features of natural blood vessels or they make use of more easily printable but less biocompatible hydrogels. Here, we use a drop-on-demand bioprinting technique to generate in vitro blood vessel models, consisting of a continuous endothelium imitating the tunica intima, an elastic smooth muscle cell layer mimicking the tunica media, and a surrounding fibrous and collagenous matrix of fibroblasts mimicking the tunica adventitia. These vessel models with a wall thickness of up to 425 µm and a diameter of about 1 mm were dynamically cultivated in fluidic bioreactors for up to three weeks under physiological flow conditions. High cell viability (>83%) after printing and the expression of VE-Cadherin, smooth muscle actin, and collagen IV were observed throughout the cultivation period. It can be concluded that the proposed novel technique is suitable to achieve perfusable vessel models with a biofunctional multilayer wall composition. Such structures hold potential for the creation of more physiologically relevant in vitro disease models suitable especially as platforms for the pre-screening of drugs.

Engineering biofunctional in vitro vessel models using a multilayer bioprinting technique.

 is a Gram-negative bacterium that causes secretory diarrhea and constitutes a major health threat in the industrialized world and even more in developing countries. Its main virulence factor is the cholera toxin, which is internalized by intestinal epithelial cells after binding to the glycosphingolipid receptor GM1a on their apical surface. A potential future solution to dampen complications of cholera infection is by scavenging the cholera toxin by presenting competitive binding motifs to diminish the in vivo toxicity of . Here, we generate GM1a-functionalized and biocompatible microgels with diameters of 20 μm using drop-based microfluidics. The microgels are designed to exhibit a mesoporous and widely meshed network structure, allowing diffusion of the toxin protein deep into the microgel scavengers. Flow cytometry demonstrates strong and multivalent binding at high capacity of these microgels to the binding domain of the cholera toxin. Cell culture-based assays reveal the ability of these microgels to scavenge and retain the cholera toxin in direct binding competition to colorectal cells. This ability is evidenced by suppressed cyclic adenosine monophosphate production as well as reduced vacuole formation in mucus-forming colorectal HT-29 cells. Therefore, glycan-functionalized microgels show great potential as a non-antibiotic treatment for toxin-mediated infectious disorders.

Microgels Sopping Up Toxins-GM1a-Functionalized Microgels as Scavengers for Cholera Toxin.

Human induced pluripotent stem cells (hiPSCs) are used as an alternative for human embryonic stem cells. Cardiomyocytes derived from hiPSCs are employed in cardiac tissue regeneration constructs due to the heart's low regeneration capacity after infarction. A coculture of hiPSC-CM and primary dermal fibroblasts is encapsulated in injectable poly(ethylene glycol)-based microgels via microfluidics to enhance the efficiency of regenerative cell transplantations. The microgels are prepared via Michael-type addition of multi-arm PEG-based molecules with an enzymatically degradable peptide as a cross-linker and modified with a cell-adhesive peptide. Cell-cell interactions and, consequently, cell viability are improved by a thin extracellular matrix (ECM) coating formed on the cell surfaces via layer-by-layer (LbL) deposition. The beating strength of encapsulated cardiomyocytes (∼60 BPM) increases by 2-fold compared to noncoated cells. The combination of microfluidics with the LbL technique offers a new technology to fabricate functional cardiac mini tissues for cell transplantation therapies.

A Layer-by-Layer Single-Cell Coating Technique To Produce Injectable Beating Mini Heart Tissues via Microfluidics.

Poly(-butyl cyanoacrylate) microbubbles (PBCA-MB) are extensively employed for functional and molecular ultrasound (US) imaging, as well as for US-mediated drug delivery. To facilitate the use of PBCA-MB as a commercial platform for biomedical applications, it is important to systematically study and improve their stability and shelf-life. In this context, lyophilization (freeze drying) is widely used to increase shelf-life and promote product development. Here, we set out to analyze the stability of standard and rhodamine-B loaded PBCA-MB at three different temperatures (4 °C, 25 °C, and 37 °C), for a period of time of up to 20 weeks. In addition, using sucrose, glucose, polyvinylpyrrolidone (PVP), and polyethylene glycol (PEG) as cryoprotectants, we investigated if PBCA-MB can be lyophilized without affecting their size, concentration, US signal generation properties, and dye retention. Stability assessment showed that PBCA-MB remain largely intact for three and four weeks at 4 °C and 25 °C, respectively, while they disintegrate within one to two weeks at 37 °C, thereby compromising their acoustic properties. Lyophilization analyses demonstrated that PBCA-MB can be efficiently freeze-dried with 5% sucrose and 5% PVP, without changing their size, concentration, and US signal generation properties. Experiments involving rhodamine-B loaded MB indicated that significant dye leakage from the polymeric shell takes place within two to four weeks in case of non-lyophilized PBCA-MB. Lyophilization of rhodamine-loaded PBCA-MB with sucrose and PVP showed that the presence of the dye does not affect the efficiency of freeze-drying, and that the dye is efficiently retained upon MB lyophilization. These findings contribute to the development of PBCA-MB as pharmaceutical products for preclinical and clinical applications.

Shelf-Life Evaluation and Lyophilization of PBCA-Based Polymeric Microbubbles.

In the past decade, anisometric rod-shaped microgels have attracted growing interest in the materials-design and tissue-engineering communities. Rod-shaped microgels exhibit outstanding potential as versatile building blocks for 3D hydrogels, where they introduce macroscopic anisometry, porosity, or functionality for structural guidance in biomaterials. Various fabrication methods have been established to produce such shape-controlled elements. However, continuous high-throughput production of rod-shaped microgels with simultaneous control over stiffness, size, and aspect ratio still presents a major challenge. A novel microfluidic setup is presented for the continuous production of rod-shaped microgels from microfluidic plug flow and jets. This system overcomes the current limitations of established production methods for rod-shaped microgels. Here, an on-chip gelation setup enables fabrication of soft microgel rods with high aspect ratios, tunable stiffness, and diameters significantly smaller than the channel diameter. This is realized by exposing jets of a microgel precursor to a high intensity light source, operated at specific pulse sequences and frequencies to induce ultra-fast photopolymerization, while a change in flow rates or pulse duration enables variation of the aspect ratio. The microgels can assemble into 3D structures and function as support for cell culture and tissue engineering.

Compartmentalized Jet Polymerization as a High-Resolution Process to Continuously Produce Anisometric Microgel Rods with Adjustable Size and Stiffness.

: The blood-brain barrier (BBB) is a major obstacle for drug delivery to the brain. Sonopermeation, which relies on the combination of ultrasound and microbubbles, has emerged as a powerful tool to permeate the BBB, enabling the extravasation of drugs and drug delivery systems (DDS) to and into the central nervous system (CNS). When aiming to improve the treatment of high medical need brain disorders, it is important to systematically study nanomedicine translocation across the sonopermeated BBB. To this end, we here employed multimodal and multiscale optical imaging to investigate the impact of DDS size on brain accumulation, extravasation and penetration upon sonopermeation. : Two prototypic DDS, i.e. 10 nm-sized pHPMA polymers and 100 nm-sized PEGylated liposomes, were labeled with fluorophores and intravenously injected in healthy CD-1 nude mice. Upon sonopermeation, computed tomography-fluorescence molecular tomography, fluorescence reflectance imaging, fluorescence microscopy, confocal microscopy and stimulated emission depletion nanoscopy were used to study the effect of DDS size on their translocation across the BBB. : Sonopermeation treatment enabled safe and efficient opening of the BBB, which was confirmed by staining extravasated endogenous IgG. No micro-hemorrhages, edema and necrosis were detected in H&E stainings. Multimodal and multiscale optical imaging showed that sonopermeation promoted the accumulation of nanocarriers in mouse brains, and that 10 nm-sized polymeric DDS accumulated more strongly and penetrated deeper into the brain than 100 nm-sized liposomes. : BBB opening via sonopermeation enables safe and efficient delivery of nanomedicine formulations to and into the brain. When looking at accumulation and penetration (and when neglecting issues such as drug loading capacity and therapeutic efficacy) smaller-sized DDS are found to be more suitable for drug delivery across the BBB than larger-sized DDS. These findings are valuable for better understanding and further developing nanomedicine-based strategies for the treatment of CNS disorders.

Multimodal and multiscale optical imaging of nanomedicine delivery across the blood-brain barrier upon sonopermeation.

Microbubbles (MB) are routinely used ultrasound (US) contrast agents that have recently attracted increasing attention as stimuli-responsive drug delivery systems. To better understand MB-based drug delivery, we studied the role of drug hydrophobicity and molecular weight on MB loading, shelf-life stability, US properties, and drug release. Eight model drugs, varying in hydrophobicity and molecular weight, were loaded into the shell of poly(butyl cyanoacrylate) (PBCA) MB. In the case of drugs with progesterone as a common structural backbone (i.e., for corticosteroids), loading capacity and drug release correlated well with hydrophobicity and molecular weight. Conversely, when employing drugs with no structural similarity (i.e., four different fluorescent dyes), loading capacity and release did not correlate with hydrophobicity and molecular weight. All model drug-loaded MB formulations could be equally efficiently destroyed upon exposure to US. Together, these findings provide valuable insights on how the physicochemical properties of (model) drug molecules affect their loading and retention in and US-induced release from polymeric MB, thereby facilitating the development of drug-loaded MB formulations for US-triggered drug delivery.

Drug Loading in Poly(butyl cyanoacrylate)-Based Polymeric Microbubbles.

The filtration performance of soft colloid suspensions suffers from the agglomeration of the colloids on the membrane surface as filter cakes. Backflushing of fluid through the membrane and cross-flow flushing across the membrane are widely used methods to temporally remove the filter cake and restore the flux through the membrane. However, the phenomena occurring during the recovery of the filtration performance are not yet fully described. In this study, we filtrate poly(N-isopropylacrylamide) microgels and analyze the filter cake in terms of its composition and its dynamic mobility during removal using on-line laser scanning confocal microscopy. First, we observe uniform cake build-up that displays highly ordered and amorphous regions in the cake layer. Second, backflushing removes the cake in coherent pieces and their sizes depend on the previous cake build-up. And third, cross-flow flushing along the cake induces a pattern of longitudinal ridges on the cake surface, which depends on the cross-flow velocity and accelerates cake removal. These observations give insight into soft colloid filter cake arrangement and reveal the cake's unique behaviour exposed to shear-stress.

Unravelling colloid filter cake motions in membrane cleaning procedures.

In this work, a two component microgel assembly using soft anisometric microgels that interlink to create a 3D macroporous construct for cell growth is reported. Reactive microgel rods with variable aspect ratio are produced via microfluidics in a continuous plug-flow on-chip gelation method by photoinitiated free-radical polymerization of star-polyethylene glycol-acrylate with glycidyl methacrylate or 2-aminoethyl methacrylate comonomers. The resulting complementary epoxy- and amine-functionalized microgels assemble and interlink with each other via a ring opening reaction, resulting in macroporous constructs with pores up to several hundreds of micrometers. The level of crosslinking depends on the functionalization degree of the microgels, which also affects the stiffness and cell adhesiveness of the microgels when modified with the cell-adhesive GRGDS-PC peptide. Therefore, 3D spreading and growth of cells inside the macroporous structure is influenced not only by the presence of macropores but also by the mechanical and biochemical properties of the individual microgels.

Article	Year
Programmable Phase Transitions in a Photonic Microgel System: Linking Soft Interactions to a Temporal pH Gradient. Langmuir : the ACS journal of surfaces and colloids\| PubMed ID: 28165250	2017
Dissipative disassembly of colloidal microgel crystals driven by a coupled cyclic reaction network. Soft matter\| PubMed ID: 29379929	2018
Engineering biofunctional in vitro vessel models using a multilayer bioprinting technique. Scientific reports\| PubMed ID: 29992981	2018
Microgels Sopping Up Toxins-GM1a-Functionalized Microgels as Scavengers for Cholera Toxin. ACS applied materials & interfaces\| PubMed ID: 31265226	2019
A Layer-by-Layer Single-Cell Coating Technique To Produce Injectable Beating Mini Heart Tissues via Microfluidics. Biomacromolecules\| PubMed ID: 31433624	2019
Shelf-Life Evaluation and Lyophilization of PBCA-Based Polymeric Microbubbles. Pharmaceutics\| PubMed ID: 31454967	2019
Compartmentalized Jet Polymerization as a High-Resolution Process to Continuously Produce Anisometric Microgel Rods with Adjustable Size and Stiffness. Advanced materials (Deerfield Beach, Fla.)\| PubMed ID: 31621960	2019
Multimodal and multiscale optical imaging of nanomedicine delivery across the blood-brain barrier upon sonopermeation. Theranostics\| PubMed ID: 32042346	2020
Drug Loading in Poly(butyl cyanoacrylate)-Based Polymeric Microbubbles. Molecular pharmaceutics\| PubMed ID: 32589435	2020
Unravelling colloid filter cake motions in membrane cleaning procedures. Scientific reports\| PubMed ID: 33208808	2020
Functionalized Microgel Rods Interlinked into Soft Macroporous Structures for 3D Cell Culture. Advanced science (Weinheim, Baden-Wurttemberg, Germany)\| PubMed ID: 35032119	2022

Dirk Rommel

Biography

JoVE Journal Publications

Other Publications