microembossing-convenient-process-for-fabricating-microchannels-on

Microembossing: A Convenient Process for Fabricating Microchannels on Nanocellulose Paper-Based Microfluidics

Nanopaper, derived from nanofibrillated cellulose, has generated considerable interest as a promising material for microfluidic applications. Its appeal ...

Xi’an Jiaotong - Liverpool University

University of Liverpool

In this work, a state-space battery model is derived mathematically to estimate the state-of-charge (SoC) of a battery system. Subsequently, Kalman filter (KF) is applied to predict the dynamical behavior of the battery model. Results show an accurate prediction as the accumulated error, in terms of root-mean-square (RMS), is a very small value. From this work, it is found that different sets of Q and R values (KF's parameters) can be applied for better performance and hence lower RMS error. This is the motivation for the application of a metaheuristic algorithm. Hence, the result is further improved by applying a genetic algorithm (GA) to tune Q and R parameters of the KF. In an online application, a GA can be applied to obtain the optimal parameters of the KF before its application to a real plant (system). This simply means that the instantaneous response of the KF is not affected by the time consuming GA as this approach is applied only once to obtain the optimal parameters. The relevant workable MATLAB source codes are given in the appendix to ease future work and analysis in this area.

Tuning of Kalman filter parameters via genetic algorithm for state-of-charge estimation in battery management system.

Ultrawide band (UWB) microwave imaging is a promising method for the detection of early stage breast cancer, based on the large contrast in electrical parameters between malignant tumour tissue and the surrounding normal breast-tissue. In this paper, the detection and imaging of a malignant tumour are performed through a tomographic based microwave system and signal processing. Simulations of the proposed system are performed and postimage processing is presented. Signal processing involves the extraction of tumour information from background information and then image reconstruction through the confocal method delay-and-sum algorithms. Ultimately, the revision of time-delay and the superposition of more tumour signals are applied to improve accuracy.

Medical applications of microwave imaging.

As accurate step counting is a critical indicator for exercise evaluation in daily life, pedometers give a quantitative prediction of steps and analyze the amount of exercise to regulate the exercise plan. However, the merchandized pedometers still suffer from limited battery life and low accuracy. In this work, an integrated self-powered real-time pedometer system has been demonstrated. The highly integrated system contains a porous triboelectric nanogenerator (P-TENG), a data acquisition and processing (DAQP) module, and a mobile phone APP. The P-TENG works as a pressure sensor that generates electrical signals synchronized with users' footsteps, and combining it with the analogue front-end (AFE) circuit yields an ultrafast response time of 8 ms. Moreover, the combination of a mini press-to-spin-type electromagnetic generator (EMG) and a supercapacitor enables a self-powered and self-sustained operation of the entire pedometer system. This work implements the regulation of TENG signals by electronic circuit design and proposes a highly integrated system. The improved reliability and practicality provide more possibilities for wearable self-powered electronic devices.

An Integrated Self-Powered Real-Time Pedometer System with Ultrafast Response and High Accuracy.

The 2020 COVID-19 pandemic has greatly accelerated the adoption of online learning and teaching in many colleges and universities. Video, as a key integral part of online education, largely influences student learning experiences. Though many guidelines on designing educational videos have been reported, the quantitative data showing the impacts of video length on students' academic performance in a credit-bearing course is limited, particularly for an online-flipped college engineering course. The forced pandemic lockdown enables a suitable environment to address this research gap. In this paper, we present the first step to examine the impact of short videos on students' academic performance in such circumstances. Our results indicate that short videos can greatly improve student engagement by 24.7% in terms of video viewing time, and the final exam score by 9.0%, both compared to the long-video group. The quantitative Likert questionnaire also indicates students' preference for short videos over long videos. We believe this study has important implications for course design for future online-flipped engineering courses.

The impact of short videos on student performance in an online-flipped college engineering course.

Nanofibrillated cellulose paper (nanopaper) has gained growing interest as one promising substrate material for paper-based microfluidics, thanks to its ultrasmooth surface, high optical transparency, uniform nanofiber matrix with nanoscale porosity, and tunable chemical properties. Recently, research on nanopaper-based microfluidics has quickly advanced; however, the current technique of patterning microchannels on nanopaper (i.e., 3D printing, spray coating, or manual cutting and sticking), that is fundamental for application development, still has some limitations, such as ease-of-contamination, and more importantly, only enabling millimeter-scale channels. This paper reports a facile process that leverages the simple operations of microembossing with the convenient plastic micro-molds, for the first time, patterning nanopaper microchannels downing to 200 μm, which is 4 times better than the existing methods and is time-saving (<45 mins). We also optimized the patterning parameters and provided one quick look-up table as the guideline for application developments. As proof-of-concept, we first demonstrated two fundamental microfluidic devices on nanopaper, the laminar-mixer and droplet generator, and two functional nanopaper-based analytical devices (NanoPADs) for glucose and Rhodamine B (RhB) sensing based on optical colorimetry and surface-enhanced Raman spectroscopy, respectively. The two NanoPADs showed outstanding performance with low limits of detection (2 mM for glucose and 19fM for RhB), which are 1.25× and 500× fold improvement compared to the previously reported values. This can be attributed to our newly developed highly accurate microchannel patterning process that enables high integration and fine-tunability of the NanoPADs along with the superior optical properties of nanopaper.

Facile Microembossing Process for Microchannel Fabrication for Nanocellulose-Paper-Based Microfluidics.

Smartphone has long been considered as one excellent platform for disease screening and diagnosis, especially when combined with microfluidic paper-based analytical devices (μPADs) that feature low cost, ease of use, and pump-free operations. In this paper, we report a deep learning-assisted smartphone platform for ultra-accurate testing of paper-based microfluidic colorimetric enzyme-linked immunosorbent assay (c-ELISA). Different from existing smartphone-based μPAD platforms, whose sensing reliability is suffered from uncontrolled ambient lighting conditions, our platform is able to eliminate those random lighting influences for enhanced sensing accuracy. We first constructed a dataset that contains c-ELISA results (n = 2048) of rabbit IgG as the model target on μPADs under eight controlled lighting conditions. Those images are then used to train four different mainstream deep learning algorithms. By training with these images, the deep learning algorithms can well eliminate the influences of lighting conditions. Among them, the GoogLeNet algorithm gives the highest accuracy (>97%) in quantitative rabbit IgG concentration classification/prediction, which also provides 4% higher area under curve (AUC) value than that of the traditional curve fitting results analysis method. In addition, we fully automate the whole sensing process and achieve the "image in, answer out" to maximize the convenience of the smartphone. A simple and user-friendly smartphone application has been developed that controls the whole process. This newly developed platform further enhances the sensing performance of μPADs for use by laypersons in low-resource areas and can be facilely adapted to the real disease protein biomarkers detection by c-ELISA on μPADs.

Deep learning-assisted ultra-accurate smartphone testing of paper-based colorimetric ELISA assays.

Realizing real-time monitoring of physiological signals is vital for preventing and treating chronic diseases in elderly individuals. However, wearable sensors with low power consumption and high sensitivity to both weak physiological signals and large mechanical stimuli remain challenges. Here, a flexible triboelectric patch (FTEP) based on porous-reinforcement microstructures for remote health monitoring has been reported. The porous-reinforcement microstructure is constructed by the self-assembly of silicone rubber adhering to the porous framework of the PU sponge. The mechanical properties of the FTEP can be regulated by the concentrations of silicone rubber dilution. For pressure sensing, its sensitivity can be effectively improved fivefold compared to the device with a solid dielectric layer, reaching 5.93 kPa under a pressure range of 0-5 kPa. In addition, the FTEP has a wide detection range up to 50 kPa with a sensitivity of 0.21 kPa. The porous microstructure makes the FTEP ultra-sensitive to external pressure, and the reinforcements endow the device with a greater deformation limit in a wide detection range. Finally, a novel concept of the wearable Internet of Healthcare (IoH) system for real-time physiological signal monitoring has been proposed, which could provide real-time physiological information for ambulatory personalized healthcare monitoring.

Self-Assembled Porous-Reinforcement Microstructure-Based Flexible Triboelectric Patch for Remote Healthcare.

 () has been a popular model organism for several decades since its first discovery of the huge research potential for modeling human diseases and genetics. Sorting is an important means of providing stage- or age-synchronized worm populations for many worm-based bioassays. However, conventional manual techniques for  sorting are tedious and inefficient, and commercial complex object parametric analyzer and sorter is too expensive and bulky for most laboratories. Recently, the development of lab-on-a-chip (microfluidics) technology has greatly facilitated  studies where large numbers of synchronized worm populations are required and advances of new designs, mechanisms, and automation algorithms. Most previous reviews have focused on the development of microfluidic devices but lacked the summaries and discussion of the biological research demands of , and are hard to read for worm researchers. We aim to comprehensively review the up-to-date microfluidic-assisted  sorting developments from several angles to suit different background researchers, i.e., biologists and engineers. First, we highlighted the microfluidic  sorting devices' advantages and limitations compared to the conventional commercialized worm sorting tools. Second, to benefit the engineers, we reviewed the current devices from the perspectives of active or passive sorting, sorting strategies, target populations, and sorting criteria. Third, to benefit the biologists, we reviewed the contributions of sorting to biological research. We expect, by providing this comprehensive review, that each researcher from this multidisciplinary community can effectively find the needed information and, in turn, facilitate future research.

Microfluidic-Assisted  Sorting: Current Status and Future Prospects.

The  is an ideal model organism for studying human diseases and genetics due to its transparency and suitability for optical imaging. However, manually sorting a large population of  for experiments is tedious and inefficient. The microfluidic-assisted  sorting chip is considered a promising platform to address this issue due to its automation and ease of operation. Nevertheless, automated  sorting with multiple parameters requires efficient identification technology due to the different research demands for worm phenotypes. To improve the efficiency and accuracy of multi-parameter sorting, we developed a deep learning model using You Only Look Once (YOLO)v7 to detect and recognize  automatically. We used a dataset of 3931 annotated worms in microfluidic chips from various studies. Our model showed higher precision in automated  identification than YOLOv5 and Faster R-CNN, achieving a mean average precision (mAP) at a 0.5 intersection over a union (mAP@0.5) threshold of 99.56%. Additionally, our model demonstrated good generalization ability, achieving an mAP@0.5 of 94.21% on an external validation set. Our model can efficiently and accurately identify and calculate multiple phenotypes of worms, including size, movement speed, and fluorescence. The multi-parameter identification model can improve sorting efficiency and potentially promote the development of automated and integrated microfluidic platforms.

Article	Year
Tuning of Kalman filter parameters via genetic algorithm for state-of-charge estimation in battery management system. TheScientificWorldJournal\| PubMed ID: 25162041	2014
Medical applications of microwave imaging. TheScientificWorldJournal\| PubMed ID: 25379515	2014
An Integrated Self-Powered Real-Time Pedometer System with Ultrafast Response and High Accuracy. ACS applied materials & interfaces\| PubMed ID: 34904819	2021
The impact of short videos on student performance in an online-flipped college engineering course. Humanities & social sciences communications\| PubMed ID: 36187843	2022
Facile Microembossing Process for Microchannel Fabrication for Nanocellulose-Paper-Based Microfluidics. ACS applied materials & interfaces\| PubMed ID: 36693010	2023
Deep learning-assisted ultra-accurate smartphone testing of paper-based colorimetric ELISA assays. Analytica chimica acta\| PubMed ID: 36813452	2023
Self-Assembled Porous-Reinforcement Microstructure-Based Flexible Triboelectric Patch for Remote Healthcare. Nano-micro letters\| PubMed ID: 37071340	2023
Microfluidic-Assisted Sorting: Current Status and Future Prospects. Cyborg and bionic systems (Washington, D.C.)\| PubMed ID: 37287459	2023
Deep Learning for Microfluidic-Assisted Multi-Parameter Identification Using YOLOv7. Micromachines\| PubMed ID: 37512650	2023

Eng Gee Lim

Biography

JoVE Journal Publications

Other Publications