crystallization-situ-room-temperature-data-collection-using

Crystallization and <em>In Situ</em> Room Temperature Data Collection Using the Crystallization Facility at Harwell and Beamline VMXi, Diamond Light Source

Protocols for robotic protein crystallization using the Crystallization Facility at Harwell and in situ room temperature data collection from ...

Harwell Science and Innovation Campus

Dehydration of protein crystals is rarely used, despite being a post-crystallization method that is useful for the improvement of crystal diffraction properties, as it is difficult to reproduce and monitor. A novel device for hydration control of macromolecular crystals in a standard data-collection environment has been developed. The device delivers an air stream of precise relative humidity that can be used to alter the amount of water in macromolecular crystals. The device can be rapidly installed and is fully compatible with most standard synchrotron X-ray beamlines. Samples are mounted in cryoloops and the progress of dehydration can be monitored both optically and by the acquisition of diffraction images. Once the optimal hydration level has been obtained, cryocooling is easy to achieve by hand or by using a sample changer. The device has been thoroughly tested on several ESRF beamlines and is available to users.

Improving diffraction by humidity control: a novel device compatible with X-ray beamlines.

Crystal dehydration is a post-crystallization technique that can potentially improve the diffraction of macromolecular crystals. There are currently several ways of undertaking this process; however, dehydration experiments are often limited in their throughput and require prior manipulation of the samples. In the present study, a novel method is proposed that uses in situ plate screening to assess the effect of dehydration by combining the throughput of 96-well crystallization plates with direct X-ray feedback on crystal diffraction quality.

Using high-throughput in situ plate screening to evaluate the effect of dehydration on protein crystals.

The field of Membrane Protein Structural Biology has grown significantly since its first landmark in 1985 with the first three-dimensional atomic resolution structure of a membrane protein. Nearly twenty-six years later, the crystal structure of the beta2 adrenergic receptor in complex with G protein has contributed to another landmark in the field leading to the 2012 Nobel Prize in Chemistry. At present, more than 350 unique membrane protein structures solved by X-ray crystallography (http://blanco.biomol.uci.edu/mpstruc/exp/list, Stephen White Lab at UC Irvine) are available in the Protein Data Bank. The advent of genomics and proteomics initiatives combined with high-throughput technologies, such as automation, miniaturization, integration and third-generation synchrotrons, has enhanced membrane protein structure determination rate. X-ray crystallography is still the only method capable of providing detailed information on how ligands, cofactors, and ions interact with proteins, and is therefore a powerful tool in biochemistry and drug discovery. Yet the growth of membrane protein crystals suitable for X-ray diffraction studies amazingly remains a fine art and a major bottleneck in the field. It is often necessary to apply as many innovative approaches as possible. In this review we draw attention to the latest methods and strategies for the production of suitable crystals for membrane protein structure determination. In addition we also highlight the impact that third-generation synchrotron radiation has made in the field, summarizing the latest strategies used at synchrotron beamlines for screening and data collection from such demanding crystals. This article is part of a Special Issue entitled: Structural and biophysical characterisation of membrane protein-ligand binding.

Membrane protein structure determination - The next generation.

The hydration state of macromolecular crystals often affects their overall order and, ultimately, the quality of the X-ray diffraction pattern that they produce. Post-crystallization techniques that alter the solvent content of a crystal may induce rearrangement within the three-dimensional array making up the crystal, possibly resulting in more ordered packing. The hydration state of a crystal can be manipulated by exposing it to a stream of air at controlled relative humidity in which the crystal can equilibrate. This approach provides a way of exploring crystal hydration space to assess the diffraction capabilities of existing crystals. A key requirement of these experiments is to expose the crystal directly to the dehydrating environment by having the minimum amount of residual mother liquor around it. This is usually achieved by placing the crystal on a flat porous support (Kapton mesh) and removing excess liquid by wicking. Here, an alternative approach is considered whereby crystals are harvested using adhesives that capture naked crystals directly from their crystallization drop, reducing the process to a one-step procedure. The impact of using adhesives to ease the harvesting of different types of crystals is presented together with their contribution to background scattering and their usefulness in dehydration experiments. It is concluded that adhesive supports represent a valuable tool for mounting macromolecular crystals to be used in humidity-controlled experiments and to improve signal-to-noise ratios in diffraction experiments, and how they can protect crystals from modifications in the sample environment is discussed.

An evaluation of adhesive sample holders for advanced crystallographic experiments.

Cellulases catalyze the hydrolysis of cellulose, the major constituent of plant biomass and the most abundant organic polymer on earth. Cellulases are modular enzymes containing catalytic domains connected, via linker sequences, to noncatalytic carbohydrate-binding modules (CBMs). A putative modular endo-β-1,4-glucanase (BhCel5B) is encoded at locus BH0603 in the genome of Bacillus halodurans. It is composed of an N-terminal glycoside hydrolase family 5 catalytic module (GH5) followed by an immunoglobulin-like module and a C-terminal family 46 CBM (BhCBM46). Here, the crystallization and preliminary X-ray diffraction analysis of the trimodular BhCel5B are reported. The crystals of BhCel5B belonged to the orthorhombic space group P2121 2 and data were processed to a resolution of 1.64 Å. A molecular-replacement solution has been found.

Crystallization and preliminary X-ray diffraction analysis of a trimodular endo-β-1,4-glucanase (Cel5B) from Bacillus halodurans.

Macromolecular crystallography (MX) is the most powerful technique available to structural biologists to visualize in atomic detail the macromolecular machinery of the cell. Since the emergence of structural genomics initiatives, significant advances have been made in all key steps of the structure determination process. In particular, third-generation synchrotron sources and the application of highly automated approaches to data acquisition and analysis at these facilities have been the major factors in the rate of increase of macromolecular structures determined annually. A plethora of tools are now available to users of synchrotron beamlines to enable rapid and efficient evaluation of samples, collection of the best data, and in favorable cases structure solution in near real time. Here, we provide a short overview of the emerging use of collecting X-ray diffraction data directly from the crystallization experiment. These in situ experiments are now routinely available to users at a number of synchrotron MX beamlines. A practical guide to the use of the method on the MX suite of beamlines at Diamond Light Source is given.

Application of in situ diffraction in high-throughput structure determination platforms.

A number of anaerobic microorganisms produce multi-modular, multi-enzyme complexes termed cellulosomes. These extracellular macromolecular nanomachines are designed for the efficient degradation of plant cell-wall carbohydrates to smaller sugars that are subsequently used as a source of carbon and energy. Cellulolytic strains from the rumens of mammals, such as Ruminococcus flavefaciens, have been shown to have one of the most complex cellulosomal systems known. Cellulosome assembly requires the binding of dockerin modules located in cellulosomal enzymes to cohesin modules located in a macromolecular scaffolding protein. Over 220 genes encoding dockerin-containing proteins have been identified in the R. flavefaciens genome. The dockerin-containing enzymes can be incorporated into the primary scaffoldin (ScaA), which in turn can bind to adaptor scaffoldins (ScaB or ScaC) and subsequently to anchoring scaffoldin (ScaE), thereby attaching the whole complex to the cell surface. However, unlike other cellulosomes such as that from Clostridium thermocellum, the Ruminococcus species lack a specific carbohydrate-binding module (CBM) on ScaA which recruits the entire complex onto the surface of the substrate. Instead, a cellulose-binding protein, CttA, comprising two putative tandem novel carbohydrate-binding modules and a C-terminal X-dockerin module, which can bind to the cohesin of ScaE, may mediate the attachment of bacterial cells to cellulose. Here, the expression, purification and crystallization of the carbohydrate-binding modular part of the CttA from R. flavefaciens are described. X-ray data have been collected to resolutions of 3.23 and to 1.61 Å in space groups P3(1)21 or P3(2)21 and P2(1), respectively. The structure was phased using bound iodide from the crystallization buffer by SAD experiments.

Expression, purification, crystallization and preliminary X-ray analysis of CttA, a putative cellulose-binding protein from Ruminococcus flavefaciens.

Dehydration may change the crystal lattice and affect the mosaicity, resolution and quality of X-ray diffraction data. A dehydrating environment can be generated around a crystal in several ways with various degrees of precision and complexity. This study uses a high-precision crystal humidifier/dehumidifier to provide an airstream of known relative humidity in which the crystals are mounted: a precise yet hassle-free approach to altering crystal hydration. A protocol is introduced to assess the impact of crystal dehydration systematically applied to nine experimental crystal systems. In one case, that of glucose isomerase, dehydration triggering a change of space group from I222 to P21212 was observed. This observation is supported by an extended study of the behaviour of the glucose isomerase crystal structure during crystal dehydration.

A generic protocol for protein crystal dehydration using the HC1b humidity controller.

Recent success at X-ray free-electron lasers has led to serial crystallography experiments staging a comeback at synchrotron sources as well. With crystal lifetimes typically in the millisecond range and the latest-generation detector technologies with high framing rates up to 1 kHz, fast sample exchange has become the bottleneck for such experiments. A micro-patterned chip has been developed from single-crystalline silicon, which acts as a sample holder for up to several thousand microcrystals at a very low background level. The crystals can be easily loaded onto the chip and excess mother liquor can be efficiently removed. Dehydration of the crystals is prevented by keeping them in a stream of humidified air during data collection. Further sealing of the sample holder, for example with Kapton, is not required. Room-temperature data collection from insulin crystals loaded onto the chip proves the applicability of the chip for macromolecular crystallography. Subsequent structure refinements reveal no radiation-damage-induced structural changes for insulin crystals up to a dose of 565.6 kGy, even though the total diffraction power of the crystals has on average decreased to 19.1% of its initial value for the same dose. A decay of the diffracting power by half is observed for a dose of  = 147.5 ± 19.1 kGy, which is about 1/300 of the dose before crystals show a similar decay at cryogenic temperatures.

Room-temperature macromolecular crystallography using a micro-patterned silicon chip with minimal background scattering.

Crystal dehydration has been successfully implemented to facilitate the structural solution of a number of soluble and membrane protein structures over the years. This chapter will present the currently available tools to undertake controlled crystal dehydration, focusing on some successful membrane protein cases. Also discussed here will be some practical considerations regarding membrane protein crystals and the relationship between different techniques in order to help researchers to select the most suitable technique for their projects.

Crystal Dehydration in Membrane Protein Crystallography.

VMXi is a new high-flux microfocus macromolecular crystallography beamline at Diamond Light Source. The beamline, dedicated to fully automated and fully remote data collection of macromolecular crystals in situ, allows rapid screening of hundreds of crystallization plates from multiple user groups. Its main purpose is to give fast feedback at the complex stages of crystallization and crystal optimization, but it also enables data collection of small and delicate samples that are particularly difficult to harvest using conventional cryo-methods, crystals grown in the lipidic cubic phase, and allows for multi-crystal data collections in drug discovery programs. The beamline is equipped with two monochromators: one with a narrow band-pass and fine energy resolution (optimal for regular oscillation experiments), and one with a wide band-pass and a high photon flux (optimal for fast screening). The beamline has a state-of-the-art detector and custom goniometry that allows fast data collection. This paper describes the beamline design, current status and future plans.

VMXi: a fully automated, fully remote, high-flux in situ macromolecular crystallography beamline.

In macromolecular crystallography, radiation damage limits the amount of data that can be collected from a single crystal. It is often necessary to merge data sets from multiple crystals; for example, small-wedge data collections from micro-crystals, in situ room-temperature data collections and data collection from membrane proteins in lipidic mesophases. Whilst the indexing and integration of individual data sets may be relatively straightforward with existing software, merging multiple data sets from small wedges presents new challenges. The identification of a consensus symmetry can be problematic, particularly in the presence of a potential indexing ambiguity. Furthermore, the presence of non-isomorphous or poor-quality data sets may reduce the overall quality of the final merged data set. To facilitate and help to optimize the scaling and merging of multiple data sets, a new program, xia2.multiplex, has been developed which takes data sets individually integrated with DIALS and performs symmetry analysis, scaling and merging of multi-crystal data sets. xia2.multiplex also performs analysis of various pathologies that typically affect multi-crystal data sets, including non-isomorphism, radiation damage and preferential orientation. After the description of a number of use cases, the benefit of xia2.multiplex is demonstrated within a wider autoprocessing framework in facilitating a multi-crystal experiment collected as part of in situ room-temperature fragment-screening experiments on the SARS-CoV-2 main protease.

xia2.multiplex: a multi-crystal data-analysis pipeline.

The utility of X-ray crystal structures determined under ambient-temperature conditions is becoming increasingly recognized. Such experiments can allow protein dynamics to be characterized and are particularly well suited to challenging protein targets that may form fragile crystals that are difficult to cryo-cool. Room-temperature data collection also enables time-resolved experiments. In contrast to the high-throughput highly automated pipelines for determination of structures at cryogenic temperatures widely available at synchrotron beamlines, room-temperature methodology is less mature. Here, the current status of the fully automated ambient-temperature beamline VMXi at Diamond Light Source is described, and a highly efficient pipeline from protein sample to final multi-crystal data analysis and structure determination is shown. The capability of the pipeline is illustrated using a range of user case studies representing different challenges, and from high and lower symmetry space groups and varied crystal sizes. It is also demonstrated that very rapid structure determination from crystals in situ within crystallization plates is now routine with minimal user intervention.

Article	Year
Improving diffraction by humidity control: a novel device compatible with X-ray beamlines. Acta crystallographica. Section D, Biological crystallography\| PubMed ID: 19966409	2009
Using high-throughput in situ plate screening to evaluate the effect of dehydration on protein crystals. Acta crystallographica. Section D, Biological crystallography\| PubMed ID: 23633603	2013
Membrane protein structure determination - The next generation. Biochimica et biophysica acta\| PubMed ID: 23860256	2013
An evaluation of adhesive sample holders for advanced crystallographic experiments. Acta crystallographica. Section D, Biological crystallography\| PubMed ID: 25195752	2014
Crystallization and preliminary X-ray diffraction analysis of a trimodular endo-β-1,4-glucanase (Cel5B) from Bacillus halodurans. Acta crystallographica. Section F, Structural biology communications\| PubMed ID: 25484213	2014
Application of in situ diffraction in high-throughput structure determination platforms. Methods in molecular biology (Clifton, N.J.)\| PubMed ID: 25502203	2015
Expression, purification, crystallization and preliminary X-ray analysis of CttA, a putative cellulose-binding protein from Ruminococcus flavefaciens. Acta crystallographica. Section F, Structural biology communications\| PubMed ID: 26057813	2015
A generic protocol for protein crystal dehydration using the HC1b humidity controller. Acta crystallographica. Section D, Structural biology\| PubMed ID: 27139626	2016
Room-temperature macromolecular crystallography using a micro-patterned silicon chip with minimal background scattering. Journal of applied crystallography\| PubMed ID: 27275143	2016
Crystal Dehydration in Membrane Protein Crystallography. Advances in experimental medicine and biology\| PubMed ID: 27553236	2016
VMXi: a fully automated, fully remote, high-flux in situ macromolecular crystallography beamline. Journal of synchrotron radiation\| PubMed ID: 30655497	2019
xia2.multiplex: a multi-crystal data-analysis pipeline. Acta crystallographica. Section D, Structural biology\| PubMed ID: 35647922	2022
Protein-to-structure pipeline for ambient-temperature in situ crystallography at VMXi. IUCrJ\| PubMed ID: 37199504	2023

Juan Sanchez-Weatherby

Biography

JoVE Journal Publications

Other Publications