laser-micromachining-for-polymer-surface-topography-design

Laser Micromachining for Polymer Surface Topography Design

Soft magnetoactive elastomers (MAEs) are smart materials that respond to external magnetic fields by dynamically altering their mechanical properties. ...

University of Ljubljana

We demonstrate the control of wettability of non-structured and microstructured magnetoactive elastomers (MAEs) by magnetic field. The synthesized composite materials have a concentration of carbonyl iron particles of 75 wt.% (≈27 vol.%) and three different stiffnesses of the elastomer matrix. A new method of fabrication of MAE coatings on plastic substrates is presented, which allows one to enhance the response of the apparent contact angle to the magnetic field by exposing the particle-enriched side of MAEs to water. A magnetic field is not applied during crosslinking. The highest variation of the contact angle from (113 ± 1)° in zero field up to (156 ± 2)° at about 400 mT is achieved in the MAE sample with the softest matrix. Several lamellar and pillared MAE structures are fabricated by laser micromachining. The lateral dimension of surface structures is about 50 µm and the depth varies between 3 µm and 60 µm. A systematic investigation of the effects of parameters of laser processing (laser power and the number of passages of the laser beam) on the wetting behavior of these structures in the absence and presence of a magnetic field is performed. In particular, strong anisotropy of the wetting behavior of lamellar structures is observed. The results are qualitatively discussed in the framework of the Wenzel and Cassie-Baxter models. Finally, directions of further research on magnetically controlled wettability of microstructured MAE surfaces are outlined. The obtained results may be useful for the development of magnetically controlled smart surfaces for droplet-based microfluidics.

Microstructured Magnetoactive Elastomers for Switchable Wettability.

Stimuli responsive materials are key ingredients for any application that requires dynamically tunable or on-demand responses. In this work we report experimental and theoretical investigation of magnetic-field driven modifications of soft-magnetic elastomers whose surface was processed by laser ablation into lamellar microstructures that can be manipulated by a uniform magnetic field. We present a minimal hybrid model that elucidates the associated deflection process of the lamellae and explains the lamellar structure frustration in terms of dipolar magnetic forces arising from the neighbouring lamellae. We experimentally determine the magnitude of the deflection as a function of magnetic flux density and explore the dynamic response of lamellae to fast changes in a magnetic field. A relationship between the deflection of lamellae and modifications of the optical reflectance of the lamellar structures is resolved.

Dynamically tunable lamellar surface structures from magnetoactive elastomers driven by a uniform magnetic field.

It has been recently demonstrated that laser micromachining of magnetoactive elastomers is a very convenient method for fabricating dynamic surface microstructures with magnetically tunable properties, such as wettability and surface reflectivity. In this study, we investigate the impact of the micromachining process on the fabricated material's structural properties and its chemical composition. By employing scanning electron microscopy, we investigate changes in size distribution and spatial arrangement of carbonyl iron microparticles dispersed in the polydimethylsiloxane (PDMS) matrix as a function of laser irradiation. Based on the images obtained by a low vacuum secondary electron detector, we analyze modifications of the surface topography. The results show that most profound modifications occur during the low-exposure (8 J/cm) treatment of the surface with the laser beam. Our findings provide important insights for developing theoretical models of functional properties of laser-sculptured microstructures from magnetoactive elastomers.

Surface Modification of Magnetoactive Elastomers by Laser Micromachining.

Bone diseases lead to an increasing demand for implants to treat long bone defects and for load-bearing applications. Osteoporosis care and accidental injuries are major contributors to this rising need. Our research aims to demonstrate innovative material systems and methods for preparing implants that can be used in regenerative medicine. We hypothesize that by combining titanium alloys (Ti6Al4V) with hydroxyapatite (Hap), we can enhance biocompatibility and tribo-mechanical performance, which are critical for the longevity of Ti-based surgical implants. Additionally, we investigate the application of laser surface treatments to expose the underlying porosity, thereby enhancing cell transport and promoting cell growth. In this study, we investigate the effects of two fabrication techniques-Spark Plasma Sintering (SPS) and powder metallurgy (PM)-on the properties of laser-textured Ti64/Hap biocomposites. Our findings demonstrate that the selected processing route significantly influences the microstructure, tribological performance, and surface properties of these materials. An X-ray diffraction (XRD) analysis corroborates our results from incubation studies in simulated body fluids, highlighting the impact of phase transformations during sintering on the chemical properties of Ti-Hap composites. Additionally, while laser surface texturing was found to slightly increase the friction coefficient, it markedly enhanced the wear resistance, particularly for the PM and SPS Ti + 5%Hap composites.

Article	Year
Microstructured Magnetoactive Elastomers for Switchable Wettability. Polymers\| PubMed ID: 36146027	2022
Dynamically tunable lamellar surface structures from magnetoactive elastomers driven by a uniform magnetic field. Soft matter\| PubMed ID: 37097616	2023
Surface Modification of Magnetoactive Elastomers by Laser Micromachining. Materials (Basel, Switzerland)\| PubMed ID: 38612065	2024
Effect of Laser Surface Texturing and Fabrication Methods on Tribological Properties of Ti6Al4V/HAp Biocomposites. Materials (Basel, Switzerland)\| PubMed ID: 40508466	2025

Gaia Kravanja

Biography

JoVE Journal Publications

Other Publications